Great video. I have several friends with pinned Colts and they all work very reliably.
@antonioilheusba
10 жыл бұрын
muito bom, obrigado por ter postado os vídeos com com demostrações especiais sou fã de armas antigas principalmente as que cotam a Historias do oste americanos, eu amo vocês.
@D5quared91
10 жыл бұрын
Awesome! Cap and Ball is the best black powder shooting channel on KZitem!
@capandball
10 жыл бұрын
Thank you sir! :) But it is not true! :)
@hoodoo2001
9 жыл бұрын
+capandball Yes it is. You have done fantastic work!
@neeedmorecoffee
7 жыл бұрын
Another fix I was taught years ago. use fine diamond file to polish and de burr the hammer edges. These edges pull the cap off and into the action. a simple filing and polishing of the tinny edges on and around the hammer face will solve 90% of your problems.
@curtharm3990
6 жыл бұрын
I actually just did this a couple days ago and tested a couple dozen shots from my Pietta 1860 and had perfect reliability. Most of the caps actually fell out the right side of the cylinder when they reached the priming area. All the edges on the Italian repros are so sharp you could gut a deer with a little determination.
@cluek9780
3 жыл бұрын
@@curtharm3990 yes, and Hollywood showed it in early westerns, they cocked the revolver with a side-flicking action to toss the spent cap
@vintagecapgunsatyourmomshouse
Жыл бұрын
This is what I also was told and have had good results. I *do* find if I fan the gun, I get more jams. I'm going to try this pin modification in one of my loose 51 clones.
@bunkstagner298
7 жыл бұрын
my 1860 Army (Pietta) now has96 rounds through it without a cap jam since I had the cap guard/rake installed. Good video, good idea Thanks
@knuckleheadpal
7 жыл бұрын
Kösönöm! As being new in the BP business, I appreciate both: the structured and excellently made tutorials and the fact, that they are from a Magyar Ur from my home.
@mtslyh
10 жыл бұрын
Interesting idea. Thanks for sharing your solution. My cheap solution is to use little pieces of vinyl aquarium tubing as a "keeper" around the caps. It helps significantly with this problem as well as reducing the possibility of chain fires from sparks bouncing under the caps. It's cheap and easy. I take the tubing and slice off a small piece. I then insert the caps into the resulting tubing "sleeve". I do this at home and just put the "sleeved" caps back into the tin. Of course, I can't use a capper at the range once the tubing is in place so I have to put the caps on the cylinder by hand and use a wood dowel to push them down firmly. This can be a bit of a pain so it all comes down to what you want to deal with. For me, eliminating chain fires and cap fragments is more valuable than getting to use a capper. And I don't have to modify my gun. So if I want an authentic experience (jams and all) then I can just use un-sleeved caps.
@capandball
10 жыл бұрын
Thanks for the idea. I will try this as well!
@brettbrandstatt
10 жыл бұрын
Older caps back in the 1800s functioned much more reliably than caps now. If you look them up, they were nothing close to the toys they make now. They did not shatter and guns did not jam as a result. So, authentic is actually having original style caps on an original gun with original nipples. Modern repro's do not put as much attention to nipples because percussion guns are considered more of a novelty. I have actually modified my gun like this, and believe me, it is easy and reliable.
@brettbrandstatt
10 жыл бұрын
***** Can you point me to a quality cap maker, if any? I do get tired of caps not fitting. Thank you.
@capandball
10 жыл бұрын
Brett Brandstatt Brett, I use RWS caps, and sometimes Seiller & Bellot caps. They are both loose on the nipples of the percussion revolvers. The original European caps I had in my hands looked something like the RWS, but as I did not fire them I do not know how they behave.
@brettbrandstatt
10 жыл бұрын
Are RWS and Seiller & Bellot at least consistent in size? Do they shatter and potentially create a jam by falling into a Colt mechanism like American cap brands such as CCI and Remington? The problem I encounter is usually caps from the same tin may not be consistent enough in size to fit all of the nipples correctly. If they are higher quality than Remington and CCI I will order them.
@randyc5650
4 жыл бұрын
My 51 colt was the best point shooting revolver I have ever shot. Also, my first fanning experience with other than a cap gun was with a High Standard Double nine about 55 years ago when I was 13. It had a fixed firing pin on the hammer which also locked back and would not fire unless you let go of the trigger and pulled it again. I was going so fast and was so exited that I jammed my palm into the firing pin twice before I realized there was great pain and I was bleeding. I'm glad to see you had better luck. Great video. Randy from New Orleans
@davefellhoelter1343
Жыл бұрын
I started at TWELVE in 77 when I built My FIRST!
@richardkluesek4301
2 жыл бұрын
Well Done ! And you explained a lot. During the 1920s to the 1950s, some Hollywood actors would raise handguns of all types 90 degrees muzzle upright while firing,as you alluded to the Civil War Cavalry doing so as to allow spent caps to fall free and not jam the cylinder. This was most probably a holdover technique of gun handling taught since the percussion era and continued long after by operators not knowing why they were doing it, only that it was cool and expected. Thanks for the elucidation.
@bunkstagner298
7 жыл бұрын
my pair of Pietta 1860 Army fitted like this have over 125 rounds between them with no cap jams. This fix works
@bunkstagner298
Жыл бұрын
I am up to a total of about 1000 rounds total on my pair of 1860's and no cap jam yet. The rake and Slixshot nipples just works wondrs.
@versal339
10 жыл бұрын
Brilliant, reading about it and then seeing the results is worth a million. I am on the way to the basement to get it done. Thanks.
@MrHrKaidoOjamaaVKJV
9 жыл бұрын
Capandball: That is a practical and great solution. I do truthfully have to say that it is hit or miss as to which replica revolvers have more or lesser problems with caps lodging into the frame and lockwork etc. For instance my Pietta 1860 Army with factory nipples hardly ever has caps fall into the chambers, yet my Uberti 1860 had that very problem, I am now experimenting with Slix Shot nipples to see how they may resolve it. Should they fail then the option you show here is the way to go.
@bunkstagner298
7 жыл бұрын
Slix Shot and a cap guard makes a very reliable gun
@versal339
10 жыл бұрын
This worked great. I used my "Tuco" 1851 Navy. (Built from three different pistols.) All six chambers go off with out a problem, no cap sucking, no jamming. Great and simple mod. Thanks.
@crossdrawjohn821
8 жыл бұрын
Try filling in the slot in the hammer with epoxy and file it smooth. Add (Slix Shot nipples) you can buy them on line. This will take away your jamming problem. I have done this on all my pistols and I'm more then happy with the result. Crossdrawjohn. Arizona. USA
@allennance949
7 жыл бұрын
the engraved uberti 1851 is a beautiful gun. the finish coloring looks very 19th century
@johnnyquest3707
3 жыл бұрын
In the 1980s California gunsmith/engraver/cowboy shooter Frank Leaman had a way to avoid cap jamming and it sounds like the same thing. I heard Frank say he put a bar in front of the hammer. I always stupidly pictured it horizontal. But now I know how he did it by watching this. Great video.
@TheGrenadier97
7 жыл бұрын
Easy and simple. Nice video sir.
@rovrobotsubmariner
3 жыл бұрын
Been down the shed this afternoon and put a pin in myself, very easy to do and it works!! thankyou.
@p2g1949
8 жыл бұрын
thank you. excellent video. if this is not the best bp channel on KZitem, it's a very close second. thanks again & keep them coming.
@lmomechtech7709
10 жыл бұрын
Very well done! I have always groaned on the occasional lock-up of my 1851 Colt Sheriff's model. Once I had to disassemble lower end to get cap remnants out of locked mechanism. I think this will work out just fine!
@Aikidophile
10 жыл бұрын
Great vid! I'm ALWAYS having trouble with my Walker jamming with shrapnel from the caps... Thanks for the tip!
@WichitaMule
9 жыл бұрын
Hi; I've watched your Black Powder videos for quite some time now and I must say that they are among the very best there is on KZitem. Many people making videos do so more to hear themselves talk, or to "look good" to their friends. I fin all of your videos to be exceptionally informative, and very truthful in everything you do. Thanks for some very fine videos. There are a lot of new or younger shooters benefiting from your videos and it's great to see that they can get quality information here. Good luck with all of your videos in the future, and whatever elso you plan to do.
@paraplegichistoricalsports5700
4 жыл бұрын
I agree with another commentator, Your channel is the best cap n ball on Utube!
@greenclover8419
6 жыл бұрын
Love your videos man thanks
@davekrembs4607
10 жыл бұрын
Wonderful video, as always. I have those pins on all 3 of my open tops. I have herd them referred to as "cap rakes"
@lorrinbarth1969
4 жыл бұрын
Years ago, before black power shooting became popular, being a college boy meaning no money, I started target shooting a Navy Arms Remington replica with target sights. A couple of my friends got interested and also bought black powder pistols and we did a ton of shooting. We never had problems with jamming on caps. The caps we used were also from Navy Arms and were thin foil, so thin they disappeared when the cylinder they were on was fired. I supposed somebody got a piece of metal in their eye and out came the lawyers.
@cluek9780
3 жыл бұрын
So true, probably a lawyer was involved. Original period caps were made of foil, so jamming was probably a nonissue.
@MrDavidTiller
5 жыл бұрын
Well, just saw this. Another solution is to polish the hammer face and round the edges. It's the burring left over from machining that sucs the caps off the cones and drops them into the action.
@phillycheesetake
10 жыл бұрын
Oh that's genius, that's just genius. It's also simple if you think about it. The reason the caps move is because they fire-form to the surface of the hammer, that post just gives them the nudge they need to stay on the nipple.
@williamclark755
10 жыл бұрын
Thank's for sharing info! I have a pietta . 44 navy! And 1858 .44 Remington !
@conifergreen2
4 жыл бұрын
Love your Civil war uniform.
@vulpixgrant
10 жыл бұрын
I do hold the barrel up some and tilt the gun to the right when I pull the hammer back on both my 1858's and 1851 Pietta's. I very rarely have a jam and never one so bad I had to take the cylinder out. The range never had an issue as long as it was pointed down range all the time, but It's out in the woods to say the least. But that's a pretty simple and genius solution, you would think Sam Colt would have though of that!
@wildrangeringreen
3 жыл бұрын
they didn't really have issues with it (it did happen, but it was very rare). Because these were cutting edge weapons, utmost attention was made to quality and finish, in order to ensure almost 100% reliability. The firearms industry at large today doesn't really consider these to be "real" guns, more of "novelties", and it shows by the lack of care taken in finishing the guns and making the components for loading them. Instead of looking at what Colt and others did to ensure reliability and ease of using bullets, everyone today tries to reinvent the wheel and do things like: installing pins next to the cones to keep the cap in place, drilling holes in sides of the cones, doubling up the mainsprings (instead of having a proper one), gluing the safety notch in the hammer face shut, and just insisting that "no one used bullets" (because the frames on repros are not relieved enough to allow bullets to be loaded most of the time) lol. Would you buy a new Glock, Sig-Sauer, or S&W if they jammed all the time and had real issues? Certainly not, and neither would the people that lived in the 19th century (it's not like they didn't already have pistols, these were just repeaters (the key here is repeating, if they don't do that, they aren't much use)).
@WhatIsYourMalfunction
10 жыл бұрын
Elegant and permanent solution.
@Bouzoukiellas
10 жыл бұрын
Another great video! Well done!
@jamesbasler9413
8 жыл бұрын
Very cool!!! This is a modification that I'm going to look into....... Thanks
@rogersheddy6414
5 жыл бұрын
In regard to Fanning the way they used to do this in the mining towns in the 1850s was where they would draw the revolver sometimes thumb it back with the drawing hand so the first shot was entirely with that hand then they would take the left hand with fingers widespread and fan back: index finger, middle finger, ring finger, Pinky. so that way they would Sweep with the hand a single sweep. there are accounts in which people in mining towns would hear a shooting in which it would be "brrrrrupt" sounding like what modern-day machine gun fire would be. Also with regard to firing six shots out of a six shot revolver... the tenancy when carrying a revolver with the hammer down between two Chambers was for vibration and carry motion to cause the cylinder to turn ever so slightly until the hammer would Come Down --Bam!-- on a live primer. a good solution to this would be to have a gunsmith drill small holes between each chamber and install small pins that would fit on the hammer, so that the hammer would stay steady, and only start to move the cylinder when the hammer is drawn back some. Remington's were made that way. I have two Remington's one uberti,1 pieta-- they have slots cut between the chambers for the hammer to rest in-- but the Colts Hammer is designed differently, so that a pin is the proper solution for that. I keep one of the remingtons loaded the other one the slots don't quite work as they should so I don't quite trust that revolver
@cluek9780
3 жыл бұрын
The Confederate Colt clones by Rigdon and Ansley used this in-between mod, tho under a hundred were made. A weak mainspring would be dangerous here. The R&A revolvers also had a rear sight in a dovetail on the barrel: an obvious mod for accuracy, tho a locus for weakness if overloaded.
@oldeafcoot
9 жыл бұрын
I just discovered Slik Shot nipples. These are replacement nipples for either Uberti or Pietta revolvers. They are made of stainless steel. They have a slightly larger bore and two vent holes drilled into the side of the nipple that relive the back pressure. I have used them with great success on my Pietta 1858 Remington reproduction. They best thing about them is that you can install them yourself. You don't need a gunsmith to modify the gun.
@charlescalvert8647
6 жыл бұрын
Fascinating solution! I'm curious about the long term reliability and stability of the pin. Track of the Wolf nipples solved the spent cap and blow back issues for me. The gun has become considerably more reliable like they were originally. The factory nipples have a dreadful taper and this is the main cause of cap fragmentation. Pietta nipples seem to be the worst. Very cool video, thanks!
@magaswitch212
3 жыл бұрын
I did saw one cao flying off but it is a great modification because clearly revolver did not jam
@trum4n6969
10 жыл бұрын
I'll need to get this done on my Walker, great idea!
@francoisdarfeuille8258
8 жыл бұрын
Thank you. It seems to be a great solution. Do you know if the revolver is still approved for competition with such a modification ?
@kennethnappe9361
9 жыл бұрын
Very good idea. That was fun to watch.
@kylethedalek
10 жыл бұрын
Brilliant man
@DenverLoveless
6 жыл бұрын
I liked your quick "Fanning" hahaha
@billwessels207
7 жыл бұрын
Interesting idea. Next bp revolver I own I will try this.
@peterschutler7067
6 жыл бұрын
Very neat idea, thank you, I will try this! I have really enjoyed your vids, what country are you from? Thanks
@CoastalorPostal
5 жыл бұрын
This awesome guy is from Hungary 🇭🇺
@woodshaver101
10 жыл бұрын
interesting solution, I have had good luck using slix shot nipples on my 1860 colt army,I may have this done to my 1851 navy, thanks for posting.
@Name-ps9fx
8 жыл бұрын
GENIUS! Thanks for sharing!
@zdenekporsch2319
2 жыл бұрын
Very interesting idea. Once I owned a nice looking replica of Colt 1860 and I faced the same problem. A jam after every second shot. Well, you have a solution. Very good and simple. But that is no historical solution. OK. Is it possible that the armies in that time used a revolver so prone to jam? Would I bet my life on such a revolver? I simply cannot imagine it, I would not. So were the original revolvers less jamming? If yes, why? Better polishing? Anything else?
@Testacabeza
8 жыл бұрын
I love this channels and enjoy all the videos, really thankful for this. But for the life of me that I cannot understand your name! :)
@momchilmihaylov4107
4 жыл бұрын
it seems the link to the pdf file is not working anymore. Can someone give a "live" link?
@oteliogarcia1562
3 жыл бұрын
the hammer notch just got more serious
@dustinh4175
3 жыл бұрын
Hello from the Pacific Northwest. Washington state, kinda the wild west
@hoodoo2001
9 жыл бұрын
Absolutely an ingenious and practical fix. If this was such a problem why did Colt not fix it? Or is this a more modern age problem?
@hewhohadoncebeenyou.6220
9 жыл бұрын
+hoodoo2001 I believe they didn't have the cap jamming problem in the 19th century. They used #9 caps I think...
@Yosemite-George-61
3 жыл бұрын
That does not keep the busted cap from going all the way around and jamming on the cylinder action, in fact, in another video of this kind, the gun jams despite having the modification sugested here. The problem is in the nipples, the cap should bust only on the bottom and remind "saddled" on the nipple ready to fall as the cylinder turns. This is hard to get right, depends on the design of the nipple and the cap one uses, some people get good results with SliX Shot nipples. Also, the hammer spring is at play and the state of the hammer face...
@onmilo
10 жыл бұрын
Brilliant genius is brilliant!
@batman88ironman
Жыл бұрын
Why did they not do this back then?
@christophertbush
10 жыл бұрын
Wonderful idea.
@terryrogerepling8290
6 жыл бұрын
The Tube is gonna clamp down on videos so Please keep me informed it you are using another platform to publish your videos.
@blackpowdershooter44
8 жыл бұрын
Great video! Can that pin be epoxied instead of drilled into the frame?Thanks!
@CROSSFIRE_TACTICS_SOFIA
10 жыл бұрын
Great video. Very professional. Thank you.
@mpccenturion
10 жыл бұрын
Very nice! Thank you for a great idea.
@user-pu4ho8iq3o
2 жыл бұрын
Кольт, прекрасен!
@allennance949
6 жыл бұрын
Awesome video
@charlesc.plumley9755
7 жыл бұрын
hello, where did u get the modified cylinder to produce the non jamming of the pistol ? could u show an up close video of the modification please ? thanks.
@sevangarabedian7684
5 жыл бұрын
nice revolver and shooting its a black powder with modification how and where did you have a modification please ? thanks
@mouluc9969
5 жыл бұрын
Thanks for the tip! Just did that on my 1851 pietta cal.36 shortened (by myself) barrel. The problem is it's a brass frame so no possibility to solder the pin onto the frame. My temporary solution: cyanoacrylate glue... Other than that, finally my 1075+ caps start as well as my remington n°10! My revolver now looks totally rubbish (soldered the lever, removed the black mottle...) but works perfectly fine, even in fanning mode 👍
@FlankerTanker
10 жыл бұрын
Seems to work very well indeed -
@zardozqq
6 жыл бұрын
great idea...thanks
@jdzencelowcz
5 жыл бұрын
What does this do to the old colt safety mechanisms?
@cluek9780
3 жыл бұрын
Can anyone forward a new link to the article mentioned? It’s a dead URL...
@incogbroadcaster1171
6 жыл бұрын
Was that a union officers uniform at the end?
@joe-ednew2824
2 жыл бұрын
Great idea! I see no problem with this on reproduction revolvers.
@slowpokebr549
10 жыл бұрын
I've been cocking my Colts whilst pointing skyward for so long that I do it with centerfire revolvers too. I still prefer a Colt to a Remington. A Colt is, to me at least, much easier to maintain and clean. I like the grip and balance better as well.
@nutnfan1
9 жыл бұрын
Well the 1858 Remington disassembles just like a Colt SAA, it is pretty easy IMO.
@slowpokebr549
9 жыл бұрын
I'm not talking about a SAA. I'm talking black powder, no top strap type Colt designs. They are a lot easier to clean. You can just dump the cylinder and barrel assembly in a sink full of hot soap and water. It's not hard to disassemble a Remington, it's just harder to get the bp fouling out of all the nooks and crannies.
@nutnfan1
9 жыл бұрын
slowpokebr549 Right, the 1858 New Army black powder Remington is like the SAA. Super easy to switch cylinders. I will agree though, the open top Colt is probably VERY nice to clean the barrel out. I didn't think of that.
@slowpokebr549
9 жыл бұрын
Yep you end up with three big easy pieces to clean, two of which I just throw in the dishwater..
@nutnfan1
9 жыл бұрын
slowpokebr549 The barrel and cylinder?
@timothyoneill7268
5 жыл бұрын
many other solutions
@alanpeterson6224
7 жыл бұрын
Where does the pin go? That wasn't clear at all.
@arnoldoxenschwanz1385
4 жыл бұрын
The Hungarian language.. Sounds interesting.
@nealperez9974
7 жыл бұрын
lovely!!!!!!!. but do you know anyone in the USA maybe Texas that does this. great work!!!!!!!!!!!
@bunkstagner298
7 жыл бұрын
Goons Gun Works did my 1860's and they are dead reliable one has 96 rounds (counted) without a cap jam
@Dontfearthereaper001
7 жыл бұрын
Just use cap keepers. No mods necessary.
@Eralen00
6 жыл бұрын
do you really have to go to a gunsmith? I'm pretty handy with tools and that looks like a very simple mod. You just have to have steady hands and good eyes. Just drill a hole and insert a pin of the same size, maybe with some glue if its loose.
@FerociousSniper
7 жыл бұрын
wow. that's badass.
@paraplegichistoricalsports5700
4 жыл бұрын
You just have way too much fun, I am jealous, lol!
@burnieblunt8798
3 жыл бұрын
What gunsmith did the pin ?
@1uptospeed
10 жыл бұрын
now thats a good idea !
@CaptGus
10 жыл бұрын
I'm doing that to my 1860 uberti. Thanks
@hook86
4 жыл бұрын
Been shooting 60 Army's at matches for years, cap jams just aren't a thing.... Maybe I got lucky?
@lkmcd1
10 жыл бұрын
Hi - great video, I had the same problem with cap jams. Another good solution I found to work which is easier to do is to install slix shot nipples. Duelist 1954 explains in this video on you tube : Equipping 1851 Navy replicas with Slix Shot nipples
@dsminwf1
10 жыл бұрын
I have a uberti 1862 pocket police that I am thinking about doing this to. What size drill bit did you use?
@capandball
10 жыл бұрын
Hi David, the pin is 1,5 mm diameter.
@joedunbar2072
5 жыл бұрын
Awesome
@Arizonablack
10 жыл бұрын
Do you have to disassemble and clean the mechanism on these cap&ball revolvers after each shooting session ??
@capandball
10 жыл бұрын
I agree with Bobby. All BP arms must be cleaned afetr shooting. This is part of the hobby, and fun as well. I do not disassemble the trigger system after each shooting. I clean the cylinder and bore with water, and I spray oil into the action thru all holes.
@Arizonablack
10 жыл бұрын
***** Yeah, it was the trigger mechanism I was talking about, I know you have to clean the barrel and cylinder right away, but to be honest I do that with any firearm, even guns that fire modern ammo. Do you disassemble the trigger mechanism at all ?? and if so how often ??
@whisperingdeath308
10 жыл бұрын
Capandball I am having a hard time finding a competent gunsmith to do the work any suggestions?
@johnnyc1227
4 жыл бұрын
Just file the hammer face & sharp edges of the hammer slot smooth. That should be enough. The originals were finished that way & had no problems.
@CaptGus
10 жыл бұрын
You should put on some Southern attire.
@capandball
10 жыл бұрын
:) We have a small NSSA team. As we are all Hungarian we are paying tribute to the 39th NY Vol Inf, the "Garibaldi Guard". This regiment was organized and led by many Hungarian officers, with quite a lot Hungarian soldiers. However on the Southern side we know of not more than 10-15 soldiers.
@capandball
10 жыл бұрын
Bobby, I will in the future.
@generalpatton8468
5 жыл бұрын
Union first and foremost.
@osobuco1965
10 жыл бұрын
I like it
@TheFirearmEnthusiast
10 жыл бұрын
Richard Harrow
@cluek9780
Жыл бұрын
I’ll bet the fanning using only skin got old real fast; you’ll need a gloved left hand!
@whisperingdeath308
10 жыл бұрын
I made the modification, but caps still get caught in the cylinder of my 1860!
@ToreDL87
4 жыл бұрын
If you cant afford slix-shot nipples, try filing a (only one) very super small notch into each nipple while still on the cylinder, so that just a little pressure hit the cap straight upwards, that should stop the caps from getting blown backwards into the hammer by the pressure and allow just a tiny bit of pressure to push the top side of the cap, tightening it and keeping it in place on the nipple. Also try deburring the hammer safety notch, the notches on the repro's are heavily burred from machining, and will likely slice into the caps and pull them back towards the hammer, into the action, and voila you can't work the action any longer, not even enough to pull all the caps out of the nipples = to get it working again you have to take apart a gun that still has live ammunition in it!!
@tylermann4271
9 жыл бұрын
does anyone know a good percussion revolver gunsmith that could do this in the united states
@Jak-it
4 жыл бұрын
Do you have an eBay account I just purchased 2 paper cartridges boxes from an eBay account of the same name
@Adam.whitney
7 жыл бұрын
Comment 100 great vid
@jonesy19691
4 жыл бұрын
An easy way is to just fill the groove in the hammer with J.b weld. You won't be able to use the safety pins on the cylinder but just load 5 instead of six!
Пікірлер: 145