I’ve been doing builds for decades now and this is probably the best build experience I’ve had in a case. A lot of great engineering went into this one.
@justevil100
6 ай бұрын
I case swapped my build last night and was impressed about how far the case comes apart. It really is great.
@anonymoose2474
4 ай бұрын
How would you rate the airflow and stock fans on it?
@anonymoose2474
4 ай бұрын
@@justevil100same question for you
@justevil100
4 ай бұрын
@@anonymoose2474 It only has the three front fans stock and they run off of a standard motherboard connector for the rgb. My issue with them is that to get the matching fans, they require to be ran off of a USB hub. Airflow is absolutely great. It has the mounting points for 2 140mm on the bottom and up to 3 120mm on the top. I have mine set up 3 120mm front intake, 2 140mm bottom intake, 2 140mm top exhaust, and one 120mm exhaust on the rear.
@anonymoose2474
4 ай бұрын
@@justevil100 yeah the difficulty of connecting fans with this case seems incredibly high for no reason. I'm split between this and the phanteks nv5
@tristanpillay1877
9 ай бұрын
6:46 yes i'm immature, yes this had me rolling on the floor
@willhallfilms
7 ай бұрын
I have never built a pc before and don’t even have parts yet to build a pc right now but you are a joy to watch and inspire me to build my own! Keep bringing the great content!
@jasperchou4952
9 ай бұрын
Tried this case myself, couple things to know: 1. The airflow for GPU really is better due to the angle of the side fans. 2. A lot of internal clearance is sacrificed for the side fans' angle, example: top radiator is hard to mount, and doesn't support performance AIOs with thicker radiators. 3. Bottom support for fans is... interesting...
@НААТ
8 ай бұрын
could i mount a deepcool ls720 WH on the top?
@danijelb.3384
8 ай бұрын
The bottom fans seem to make no difference.
@thefryinallofus
7 ай бұрын
@@danijelb.3384 The biggest thing they can effect is positive case pressure (based on smoke tests, but that can of course be changed by adjusting intake/outtake fan curves). With all fan slots filled and all fans running at 100% the case has excellent positive pressure.
@singwolf.
7 ай бұрын
Is it possible to insert a 60mm thick radiator + fans on top or in front?
@danielee8418
6 ай бұрын
@@singwolf.yes, if not, try to use silent wings pro 4 with removable corners
@TheAtkinson118
9 ай бұрын
I've just actually done a build in one of these two weeks ago.. Very easy to work with for cable management.. So much Airflow...And it looks great if you have it at a Angle/offset display so you get to see all the fans ect... I'd recommend good quality fan's,it really makes the case alive if you can control your lighting speed/brightness Actually one of the best cases I've built in a while, especially for the money!!
@idkconflict
8 ай бұрын
is the nzxt hub necessary
@king-yu5jn
8 ай бұрын
which fans would you recommend to fill up the case?
@TheAtkinson118
8 ай бұрын
@@idkconflict No there's other hubs out there..I've mentioned a idea in a post below for budget stretched. If you're ok not changing fan colours you can just get one colour and geta cheap connection that goes to your motherboard...1 connection to mono one end and you can have 5 fan's connected the other.. cost about £3
@VayderTrynyty
9 ай бұрын
I just the other day purchased a HYTE Y60 case and was looking for video reviews and found your channel and have been loving the vids! Keep up the great work!
@xSwxve
9 ай бұрын
Got this case for an upcoming build, build quality is superb. Cable management is a solid 8/10. Very similar to the Y60 but offers more functionality which I’m all for.
@MMAengineer
7 ай бұрын
which mainboard and cpu coooling and which fans do you have? I dont know what to buy
@josiahst.hilaire7086
9 ай бұрын
They was definitely trying to make some money off extra old fans they had in the back 😂
@Kentish9494
9 ай бұрын
Just purchased a black non RGB one and swapped the fans out for Lian Li ones. Looks awesome so happy with it
@apple2012convas
6 ай бұрын
so you can buy the non rbg and you can just put different rgb fans, because ill be adding 120 duo fans on them because the defult rbg are ass
@Kentish9494
6 ай бұрын
@apple2012convas yes absolutely and I flogged the ones that come with it on ebay for a few quid
@fariee
2 ай бұрын
i did the exact same thing and i'm so stoked with how it came out!!
@drewy2222
6 ай бұрын
i bought the white version of this case. i love it. the paint job is great and i really love the duel chamber aspect
@indrajeeth7
9 ай бұрын
Why aren’t people doing a 7800x3d and 7800xt build😢. Still waiting to see how that build performs
@MariusGeu
6 ай бұрын
I build pc's for decades now and the h6 flow is the absolute best case for me. It makes so much fun to build with it. Outstanding case! :)
@anonymoose2474
4 ай бұрын
How good are the stock fans?
@MariusGeu
4 ай бұрын
@@anonymoose2474 I think the nzxt fans are pretty decent but I have no experience with these fans. I changed them with phanteks d30 :)
@vMaxHeadroom
5 ай бұрын
Bought this case at launch in white and it is a stellar case. I have a standard ATX motherboard and the fit is perfect and I think the motherboard you used is E-ATX so a pretty big overhand that no doubt will disrupt some of the airflow from the side fans which are excellent. No issues on the bottom fans as I stuck some Corsairs 140's that I had and it fit my Corsair AIO with the Phanteks T-30's which are thicker fans...Easy to build in, cable management was easy and cooling is great....so is the price!
@priincexavi5504
5 ай бұрын
Can you put an AM4 motherboard for the H6 case?
@CharIy93
2 ай бұрын
@@priincexavi5504 Si, puedes poner Miniitx, Microatx y Atx.
@joshmaag2457
9 ай бұрын
I really have to stop looking at case reviews considering I just got my case in haha
@l5-cs.
9 ай бұрын
me too, i just finished my build with an h7 and now im pissed off i didn't get the h6
@joshmaag2457
9 ай бұрын
@@l5-cs. I got a y60 box sitting under my desk and all the parts ontop. I’m happy with the case choice just so many I want to build in. But I’ve had my eye on Hyte for a while now
@officejedi7465
6 ай бұрын
wouldn't an exhaust fan at the back, and the top (since there is no AIO) benefit in helping to direct the hot air out of the system and improve the overall air flow? Most H6 builds I've seen have at least one fan at the back and some at the top to move more air in and out.
@712Jefferson
2 ай бұрын
Great build vid and very helpful for someone considering the Taichi Lite/H6 combo, thank you!
@ryophage297
9 ай бұрын
Please show more than one game in these build videos. Would like to see how it performs in more than just Starfield
@rc8281
2 ай бұрын
Recently bought this case with the basic fans. Immediately removed them and installed Corsair RX fans. Clearance issue for the bottom fan connector was real. I notched the case slightly with a dremel on the rolled lip on the back where you can't see . Also for the connector on the angle side fans i cut rubber boot off the Corsair cable to let the panel cover click into place. Will finish the rest of the build this weekend when time allows. Will be a 7800x3d and 4808 super build
@rc8281
2 ай бұрын
I will say if your having trouble with your Corsair icue link cables connectors fitting, don't be scared to experiment on one of those short cables they give you with the fan and cut the rubber boot off with a razor blade carefully. You don't need all of them. I ended up buying 3 of the 600mm cables. In the end, I will only have 4 connections for 9 fans
@mrbabyhugh
4 ай бұрын
4:44 KMT, paying extra for the RGB version makes no sense. Just do the regular ones and if you feel to then upgrade to more premium RGB.
@dashtfied8508
9 ай бұрын
NZXT : Can I copy your homework? Hyte : Yeah, sure but make sure you make it look a little different.
@xSwxve
9 ай бұрын
To be fair I thought the same at first, but it takes an otherwise useless piece of glass and gives it functionality.
@_jiraffe_
9 ай бұрын
Why do people think every dual chamber is a copy of another dual chamber while every "normal" case look almost identical?
@dashtfied8508
9 ай бұрын
@@_jiraffe_ I would say "inspired". When someone introduces us with something unique, others get "inspired". Its like Lian li's O11 dynamic. Lian li first launched it, but now you can find similar looking cases from other brands at different ranges. Even NZXT has one
@OGHawkeye
9 ай бұрын
oh boy....you make it look really good actually. this case has grown on me a abit since release..looks sleek.
@friarmurphy6791
9 ай бұрын
I feel like the fart was a very important part of this build.
@RBFR01
9 ай бұрын
I'd be interested in a build that is souly focused on cooling and performance, would be interesting to play games in 4k absolute max settings with really good thermals.
@buyhighselllow408
Ай бұрын
is it better to have atleast one exhaust fan with this setup? would it reduce dust accumulation?
@Controllerplaayer
Ай бұрын
Where do you plug the preinstalled rgb fans into Ik it’s the motherboard but where does the rgb go into
@Goefrei0516
Ай бұрын
That's some wobbly table hehe. Nice Review btw, subscribed.
@EddieJayeCodm
9 ай бұрын
I don't plan on building a pc soon, but watching these video is so satisfying.
@KOT-ANGRY
8 ай бұрын
OMG, i want this case, BUT after your review im thinking... This gap at top of the motherboard, wtf? Why PSU is mounted SO HIGH? 😮 Plus all heat from MB back will heat it up... I dont care E-atx motherboards, so M-ATX will fit very well! The biggest minus for me in this case are NO TINTED WINDOWS (like Corsair 4000/5000D Airflow haves...) 😢, i want tint, really dark like 4000D... 😢
@carcar5911
25 күн бұрын
Im getting this case. Im just starting to worry about the fan set up. I will have the 3 intake fans 2 fans on the graphics card.. 2 fans on the phantom evo cooler..and the 1 exhaust fan on the power supply.. is this enough cooling? Or will it have negative pressure? I bought the pc part picker magnificent amd gaming/streaming build.. any info would be appreciated
@Sheriffjp
8 ай бұрын
jumped in to this case from O11 dynamic and i had to remove io panel side fan of my Arctic 360mm aio, because it hits Steel legend MB heat sink. unless that it was a good case when install 2 bottom fans.
@seanryu5214
9 ай бұрын
I just built in this case ten days ago and I love it. Very well priced and I also used the same graphics card I the 7800 xt hellhound and it’s a silent beast.
@LeoFN44
9 ай бұрын
your my favorite pc youtuber
@vaporeon6594
9 ай бұрын
Hoping you get to review the Montech King 95 soon, most anticipate case for imo in terms of value
@icyy9098
5 ай бұрын
Did he not put the cpu cooler on backwards? I feel like the fans are blowing the air back into the case
@cybersot9367
7 ай бұрын
Hey do I need a different type on psu to fit in a dual chamber case like the h6 flow
@christiandk09
9 ай бұрын
i wonder what an H8 would look like
@berkalicious8792
6 ай бұрын
I got 3 120mm fans where should i put them ? I have the same components except motherboard and cpu
@He_him7
2 ай бұрын
Hi centric I just brought this case and the 7900 gre and the ryzen 7600x will I be ok using only 2 140mm on the bottom and nothing on the top or will I need fans on the top to ?
@Orzav
9 ай бұрын
I have an Aorus B550 Elite AX V2 board with 2 sticks of Corsair Vengeance LPX RAM. I want to top-mount an Arctic Liquid Freezer II 360mm inside the H6 Flow case. This cooler has a very thick radiator (38mm). Will the fans and radiator hit my board and RAM sticks?
@bell6014
5 ай бұрын
im using it right now for my first pc build, it is indeed nice and strangely beautiful 🥰
@stawsky
9 ай бұрын
DDR5 5600Mhz only..... strange.... I just realize... Why this Air cooler been install like this ?? Why there is no fan on front and mid ?? Weird for me.
@Rosso87
7 ай бұрын
there is a fan in the middle, he just removed it during installation to access the screws. It looks like he as the fans set up in a Pull config instead of push also.
@stawsky
7 ай бұрын
@@Rosso87 I fully aware of it but he is using a pretty low memory ram so not sure why didn't try to fit one on front and second on mid. I wonder how much this config hit a performance of this cooler...
@falnao9035
22 күн бұрын
Hello is the support for graphique card is including or optional ? Thanks
@RBFR01
9 ай бұрын
I feel like USB in the middle somewhere on the side of the front panel would be great for USB location as people put their cases on a desk or on the floor and having it on top or on the bottom would be restrictive in regards to your setup and worse for people with back problems having to bend that far down.
@bergdk237
8 ай бұрын
I wish NZXT had INCLUDED 3 of there duo ARGB fans, or some reverse fans and a controller at no extra cost! It would have made this case much better! Case company's should really take note of what Montech is doing, just look at there latest King 95 pro!!!
@ronb112
8 ай бұрын
I have build one with 2x 140 fans at the bottom and a 360 Kraken Elite on top in combination with the 3 120 in front. Getting very nice temperatures on the cpu as well as gpu. Very easy cablemanagement to.
@SnoozecoopYT
8 ай бұрын
One question can I put a GPU holder down there or is there any space for a GPU holder especially for bigger bulkier GPU?
@karammelkon
6 ай бұрын
Does that mean I can buy two separate fans for the bottom without a controller and buy the controller separately?
@BionicBunV.1
7 ай бұрын
Mayhaps wanna remove the plastic before putting the pc in the case. Static electricity is kinda…DEATH 👁️👄👁️
@clarity6229
2 ай бұрын
Can someone tell me how to change the color of the fans? I have the default one
@PaganWizard
Ай бұрын
I am seriously considering this case for a build, and have a question about it. How many 140mm fans can be attached to the top of the case?
@BurN79
Ай бұрын
2
@mniakan754
9 ай бұрын
I went with the lian li lancool mesh 2 for my own personal rig and it was an amazing case to build in especially with how much space you have to work with without the case being too big (but it is very heavy at 9kg empty) but if I were to build in this there are things that would’ve driven me absolutely insane like the base fans not being daisy chained or how there’s no fan control hub or how you have to open the side panel to remove hard drives My suggestion to other people when they’re building their new pc has always been the lancool 215 or the 216 and I was kinda hoping for this to change that to have more options
@jackbrauer5516
9 ай бұрын
What software did you get for the ram? I’ve heard the Kingston software doesn’t work but I haven’t tried it
@FoxMamba
8 ай бұрын
Had fun building in this case. Go with the cheaper version and this case looks much better in white.
@jamro15
9 ай бұрын
i have ryzen 7700 and after running cinebench ig goes straight to 70 degrees? its cooled by corsair aio, how is possible that yours got to 57 only? its great temps?
@chowchow0202
4 ай бұрын
i know this might sound stupid but what is the diff between aio and traditional air coolers? like there are some really good ones by deepcool and other brands I'm not knowledgable on this so yah any help would be dope
@justatim8143
8 ай бұрын
I like the sticker under the plastic and I leave it on. Case needs 120 mm fan holes for the bottom fans and Grommets over all the open holes. Also like the I/o on the bottom to use on desktop. Keep the Cheap fans and make it $89.00.
@ninjapcmaster7005
3 ай бұрын
the cpu heatsink is set up WRONG.
@dreadtrain2846
2 ай бұрын
You used an eATX MB, hence the hangover. I'm going to try an mATX in it, just for funsies and cheapies.
@cyberwolfgaming359
9 ай бұрын
thanks for this video i want to get this case but i was not sure about it but now i am
@ScoobWRX04
18 күн бұрын
I love this case, I bought this in white.
@TheRoboxRBLX
2 ай бұрын
Can you install like the Samsung sata ||| ssd ? Is there any support for the ssd?
@ElitePWNSFace
Ай бұрын
Ok glad. I was not the only one. Those fans were a nightmare to figure out, so many freaking wires for 3 fans. It was rediculous. Need a better system. Outside of that. I love the case. My last case was a full size tower that weighted in a good 50 pounds before anything was added(feels like it)
@LordJoseph96
6 ай бұрын
Bummed to see not much room for radiator set up on front. Big thing I was excited about with this case as i prefer sending heat out the top and don’t wanna run aio lines from the bottom of the case to the cpu on top lol
@LeoFN44
9 ай бұрын
i have a i5 12400f and intel arc a750 and 32gb of ram, which graphics card should i upgrade to, Thanks
@austinplayz3115
9 ай бұрын
i would go for the rtx 3060
@LeoFN44
9 ай бұрын
@@austinplayz3115 ok thanks
@BB-wh2vu
9 ай бұрын
Funny enough, I literally got home and started building into my brand new H6 Flow when I see this video released. I really like it so far (Annoyed it only takes 140s on the bottom) but no complaints here yet
@danijelb.3384
8 ай бұрын
The bottom fans make no difference thermal wise anyways
@gary444
7 ай бұрын
Is it 120s on the corner mounts?
@BB-wh2vu
7 ай бұрын
@gary444 yes, only 140s on the bottom
@edwardwilliams3815
9 ай бұрын
I want to case swap sooner than later, and this was the case I was considering, great thermals, looks great, currently in an older Corsair Carbide spec-04, great case, but I do like the box glass look of newer cases...GG great vid :)
@glanza-87
9 ай бұрын
The overlay when testing games is that Afterburner or something else?
@kalle_szn843
9 ай бұрын
Hi i thought too checked if the PNY GeForce RTX 4060 8GB Verto Dual Fan is good and work with an intel i7-12700?
@JustAverageLarry
8 ай бұрын
Imma stick with my H9 Flow baby!
@KxngOG
9 ай бұрын
Is be quiet! System Power 10 850 W 80+ Gold Certified ATX Power Supply A good one ??
@lulugamerpilot
Ай бұрын
i aint doing my h9 flow like that, dawg is perfect
@tacocheif429
9 ай бұрын
Question: i plan on upgrading to a new motherboard soon, will i have to boot windows again in the bios, and if i do, can i just reuse my current storage devices that already have windows files on it or will i have to overwrite the files when the bios is put in
@bobby7975
9 ай бұрын
I did a gut swap in this case coming from a hyte y40, loved the case, my 2 big negatives is, I had to gently yet firmly push my lian li uni fans into the where the 3 pre installed fans are at, they barely kinda fit, also th bottom 140s, my lian li uni fans didnt fit there because of the notch at the front and back ends, so i had to use some nzxt 140s i had. 7/10 case for the problems i encountered, but still loving it.
@Kentish9494
9 ай бұрын
You sure ? My lian li 140s fit perfectly. Are you talking about the connecting lugs ? They can be removed by twisting them off. Like I said mine fit absolutely perfectly
@bobby7975
9 ай бұрын
@Kentish9494 I have the uni SL INF 140s idk if the spacing is different but the connector part where you daisy chain gets in the way for me with that lip that hangs. And again the 120s are a very very tight fit in the back
@Kentish9494
9 ай бұрын
@bobby7975 I have the exact same but the V2s so I don't know if they're different but like I said they connect to each other and slot in that bottom slot perfectly. Maybe give them a go ?
@kentdaliva6898
4 ай бұрын
may i ask if front panel is not removable?
@jasperdalesamaniego3407
8 ай бұрын
I think the CPU fan should face the other way
@CeeBee720
8 ай бұрын
I was thinking the same but wasn’t too sure… can somebody confirm?
@russellbower2557
Ай бұрын
he corrected it you can see the deepcool logos go from top to bottom when he shows the motherboard installed
@FernDaawg
9 ай бұрын
i have the same cpu cooler however mine is the ak620 zero dark, my question is did i install my cooler incorrectly because i have one fan near the ram and not facing the rear of the pc case.
@russellbower2557
Ай бұрын
the front of the fans should face the front of the case so air blows to the rear
@FernDaawg
Ай бұрын
@@russellbower2557 sorry I meant that I have one of my fans in the front of the pc case and the other one is in the middle. Whereas, he has one of the fans in the middle of the cooler and one in the very rear.
@louie1432
4 ай бұрын
Oh dude, pair this with Noctua fans, crisp performance, crisp airflow, zero noise, incredible.
@Jumboz0
2 ай бұрын
what specific model of Noctua fans, i’m building a pc and i’m looking at fans currently I have Be Quiet!’s picked out
@louie1432
14 күн бұрын
@@Jumboz0 i’d say go for the black ones. they look more sleek with this case than the classic beige and brown ones. however it’s really up to personal choice.
@Jumboz0
14 күн бұрын
@@louie1432 thanks 👅
@YuniorGamboa
9 ай бұрын
I wish they would have stayed the same design as H9 but just more compact. I still don't really. love that new angle.
@lmaoimmj8140
7 ай бұрын
This is useful because my pc is next to my window so pc breaths cold air🗿🗿🗿
@Booth73
9 ай бұрын
Idk that fan on the bottom of the nv5 and the way the psu shroud thing is angled I kinda hate it. But now the nv9 I believe it is I love that one. But also this h6 flow for me is just spot on. I'm digging it
@Naruto-yj5lv
3 ай бұрын
I’m about to do my first build ever using this case
@fili191
6 ай бұрын
the arctic liquid freeze fits in this case?
@KingDeep16
9 ай бұрын
Can you test the aerocool dryft please it’s a £50 budget case that looks quite aesthetically pleasing
@BennyBoyBlue
7 ай бұрын
I noticed you didn’t put any exhaust fans? I just ordered this case and cooler and plan to put 3 exhaust fans at the top and one at the back. Will those actually be needed?
@AISquiddy
6 ай бұрын
You don't really need that much exhaust. It is typically better to have more intake fans than exhaust fans. Most builds you'll find on youtube usually use something around 3 intake fans and 1 exhaust fan.
@peakycapone2417
6 ай бұрын
Yes the airflow on this is actually amazing. They’ve done thermals and smoke tests on airflow. The engineering behind this case is one of the best out there. Sooo he’s wrong about the airflow. They probably perfected this airflow. Tests on been done with negative, positive and neutral pressure. He’s wrong on that. You can do a high end build with a strix mobo and fits perfectly. I have a 4090 and a 14900kf. Mine is a beast. Who ever is starting to buy a pc use this case.
@anonymoose2474
4 ай бұрын
How good are the stock fans?
@gideonengelhard3919
9 ай бұрын
Can anyone advise me on how to upgrade my PC I built in 2020? 2080 Super Ryzen 9 3900x 32 GB RGB Ram Nzxt AIO water cooler Aurorus b550 master motherboard NVMe Samsung SSD 970 SCSI Disk Device (932GB) Samsung SSD 970 EVO Plus 250 GB Lian Li o11 Dynamic Case 850 watt golf plus
@typerightseesight
9 ай бұрын
They need to make a psu that can also cool the cpu so we don't have that extra block in some random location.
@gabrieldejonge
9 ай бұрын
I am going to build my pc in the h6 flow I like it a lot do you might have a good gpu to pair with r5 7600x amd or nvidea new or used or you could give me one
@markfreeman-v8b
9 ай бұрын
hi what do you do with all the pc`s you build
@againstall4agsandtrans511
9 ай бұрын
Yo did this ninja just fart 😂😂 6:46
@SmokeySoMessy
9 ай бұрын
I literally just did a white H6 Flow build a couple hours ago lol, I love it, just a heads up tho Lian Li Uni SL-Infinity 140s don’t fit on the bottom, and you’ll have to take the front glass panel off to install a 360mm AIO
@PcCentric
9 ай бұрын
Can you do two streams of the fans down the bottom? IE, use as normal fans and not interlock, the the connection goes to the back of the case ?
@SmokeySoMessy
9 ай бұрын
@@PcCentric i honestly didn’t think of that. I just tried it and after taking the interlock pegs off it slid in perfectly. You’re a genius! Lol
@danijelb.3384
8 ай бұрын
Did you build with nzxt side fans or all Lian Li. I’m thinking about replacing the three here and go all Lian Li
@SmokeySoMessy
8 ай бұрын
@@danijelb.3384 I went Lian Li but I’m about to get nzxt fans instead, the lian li 140s are too bulky for the bottom spots and won’t fit, I do have 3 that I’ll keep on my AIO but other than I think going nzxt with a nzxt case will be the better option
@FromTheHood
6 ай бұрын
@@danijelb.3384did u do it? Do they fit cause they are thicker?
@Kayzerzero
8 ай бұрын
can we put a 240 waterr cooling ?
@justevil100
6 ай бұрын
Soooooo........ you have no exhaust fans....... oversight?
@cyberwolfgaming359
9 ай бұрын
also what fps counter do you use
@MikeBob2023
9 ай бұрын
Thank you for taking the time to provide a close look at NZXT's H6 Flow. 👍🏻 I'm glad I purchased the Montech King 95 Pro instead (and considering the extra money you had to spend on that pair of 140mm fans, I'm sure I got the better deal overall 😜). The last NZXT chassis I built in was their *H210i,* and (scraped knuckles notwithstanding) I think it's a build that came together rather nicely. I like this little case a lot. Recently however it seems as though NZXT is going the cheap route with their newer cases, and that's clearly demonstrated with the H6 Flow: those atrocious front fans, no rubber grommets, and the lack of an included RGB/PWM hub are clear indications of this. I'm calling it a Money Grab, and NZXT gets a great big, 'Thanks but no thanks' from me.
@MrRiskey4720
5 ай бұрын
Gosh I want a hyte y60 but this don’t look that bad however, I prefer the hyte y60 aesthetic. GOSH
@Daddy-.-
9 ай бұрын
Daddy will not lie, I was waiting for you to build in this and the montech king 95. You’re the reason why I want that. Cause daddy is king. 😂
@ProfShikari
9 ай бұрын
I’ve just watched this video again as I really enjoy the content… why can’t I like it again? Lol
@EDUAROSOLAS
9 ай бұрын
It's 2023, why the hell do we need 800 cables for our fans? Other companies have figured it out. Who tf is buying these still?
@Polarbear8247
9 ай бұрын
I actually liked it from the moment I first saw it I think the angled fans are quite cool
Пікірлер: 281