So for anybody wanting to make a DIY car repair video they should watch your video to learn how to do it. Very very well done. Camera work was nice. Steady and on point. The audio was a good volume and you spoke clearly and you'll explain stuff as you went with out "uh" 'um" and dead air time. It was very helpful for me. Thank you
@Jeriun
6 ай бұрын
I want to thank you. I have a 2013 Buick Lacrosse that had a P0411 code for awhile. The other day I took the valve apart and saw a bunch of carbon buildup. A full can of brake clean and thorough scrapping/cleaning, my CEL went off today!
@andrewkeen5135
2 жыл бұрын
Success!! Nice job! Good to see a non-mechanic like me apply some logic, a little research and some elbow grease and get it fixed. Enjoyed the vid!
@1RoadGarage
2 жыл бұрын
Yep, can figure almost anything out with KZitem these days… glad you enjoyed! 👍👍
@rickb2267
Жыл бұрын
Excellent video, sir! Very thorough! Like that you took apart the old valve and showed us how it was stuck. I am going to take mine apart and gently clean it, so this really helped! You can also clean a PCV instead of buying a new one. Carb cleaner is the key. Thanks a million! (I didn't even know there was such a thing as a secondary air injection system until I got a code...)
@jsmith5443
4 ай бұрын
You can also clean it and put it back on. I did. It worked well until recently. The screws started coming lose, so perhaps use thread locker on the tiny screws that hold the flap to the part.
@fargeeks
2 жыл бұрын
I want more video with the envoy because I find what you point out on it to be useful for me to know
@flyboy2610
2 жыл бұрын
I'm SO glad my '04 Chevy Trailblazer does not have the SAIS!
@fargeeks
2 жыл бұрын
Wait the 04s didn't do Have this system???
@flyboy2610
2 жыл бұрын
@@fargeeks No they don't. I believe '05 was the first year for it.
@fargeeks
2 жыл бұрын
@@flyboy2610 oh thats the case then thats one less thing to worry about
@MikoTactical
Жыл бұрын
I replaced this very easily and cleaned throttle body too. Car is running smooth, rough idle is gone, but it is still running lean with check engine light for some reason 🤷♂️ but man, you KZitem guys are amazing. I’m no mechanic at all, but this was a breeze.
@fargeeks
2 жыл бұрын
I must buy for preventive maintenance
@29madmangaud29
2 жыл бұрын
Wow dude, have you've checked around, what a mechanic's shop would've charged for labor? I'm "VERY" curious to know that, as I'm sure that ALL of us are? You've saved a lot of $ doing it yourself! Good Job! Jimmy, Marcel in Yuma
@chuckisbusy
2 жыл бұрын
An Audi dealership charged me about $600 some years ago for a secondary air pump code.
@1RoadGarage
2 жыл бұрын
Thank you!! Haven’t checked what it would cost but I’m sure I’ve saved many thousands of dollars over the life of each of my vehicles. 🤙
@29madmangaud29
2 жыл бұрын
:Oh right on Jimmy, I've seen the price, as you've said , it's listed.... Thanks man!
@dna59
2 жыл бұрын
I had the same issue on my 05 when I had it. I just had mine tuned out when I had my pcm tuned.
@victorameduri3227
11 ай бұрын
Thanks replaced Valve on my Colorado fixed no engine light
@quite.1542
2 жыл бұрын
Hello Jimmy’s you have 3 cars of GMC & I would like to ask you Which model of the is the best and you much like?
@1RoadGarage
2 жыл бұрын
That’s a tuff question. All have there strengths and weaknesses. I love the ‘95 Suburban because of its nostalgia and simplicity. It’s just enough modern but just enough vintage. The sweet spot. The ‘03 is super comfy and has the amazing 5.3L engine. The ‘05 Envoy has a great engine too (the Vortec 4200 inline 6) and gets the best mileage of all of them but it’s a bit small and most of all I can’t really sleep in there 😜. If I had to keep just one it’d probably be the ‘03 just because it meets a lot of our needs and still has a super comfy ride as well as being very reliable. 🤙
@shoafymusic
3 ай бұрын
I have a 2005 Chevy trailblazer that does this same EXACT thing. No engine code tho, but same exact noise when starting.
@alejandraoregel8648
6 ай бұрын
I have 2007 Saturn, I changed pump relay and valve! And drove for 40 minutes and check engine light on 😢 again same code!
@johne6081
Жыл бұрын
2001 VW Passat 1.8T -- smog test readiness monitor would not set because secondary air control solenoid wouldn't hold vacuum
@Wrenchingdaily
2 жыл бұрын
Good thing you don’t have the Toyota 5.7V8. You gotta remove the intake manifold to change the SAI valves. Dealership charges upwards of $2,500 to replace them.
@1RoadGarage
2 жыл бұрын
Holy smokes!!??
@Wrenchingdaily
2 жыл бұрын
@corey Babcock same here. I can so it myself for just the price of parts, but I’ve read on many Tundra forums and Facebook groups that the stealerships charge an outrageous fee for this job.
@jsmith5443
4 ай бұрын
I replaced my valve, pump, one oxygen sensor, and got the relay tested at Oreilly's. I think I will take my check valve apart to inspect it. It says the check valve is stuck open.
@cup_and_cone
2 жыл бұрын
Happy we had an early model Envoy...no SAI on it.
@Pjshipman27
Жыл бұрын
I have that same year GMC Envoy but mine is black. I just got that check engine light code last week. I’m gonna take a look at it and see what caused the light to come on
@lifegoeson4085
9 ай бұрын
My 09 TB is still runs good, your motor only gots 75,000 miles and secondary burn out 🤔
@danr9497
7 ай бұрын
Nice job! Thank you for the video!
@pleiadianaran
Жыл бұрын
I have a GMC Terrain 2013 with a P0411 check engine code and the mechanic told me it was the air pump that was faulty. I replaced it, the light went away, only for a day though and the next day the check engine light came back on. Now I’m stuck with a brand new pump and an old one that still works. Based on your video, the relay is working fine so its going to be the valve what they’ll need to check next.
@davesherman74
Жыл бұрын
For what it's worth, I have a 2013 Equinox 2.4 with the same problem. If it's not the check valves (there are two of them, about $140 apiece), then the other problem is the air injection ports get clogged up with carbon, there's a service bulletin for that. Unfortunately, that is a a difficult repair because it involves removing the exhaust manifold to clear the carbon out. I'm really hoping that's not my problem.
@pleiadianaran
Жыл бұрын
@@davesherman74 My mechanic is still working on this, there was a slight crack on the secondary air injection pipe and he had it welded, plus the electrical connector that goes into the Check Valve was burnt so I had it replaced. But the issue remains, I’ve taken the car back this morning and he’s going to check the manifold and clean out the injection ports. I’m really hoping this is going to be it
@pleiadianaran
Жыл бұрын
@@davesherman74 After test driving the car for the past two days, I can say that the problem was indeed the air injection ports. After literally trying everything else, replacing the air pump, checking the air injection hose, welding a crack in the air injection pipe, replacing an electrical connector for the check valve, making sure both check valves worked properly, it all came down to cleaning the air injection ports and the manifolds, there was a lot of carbon buildup. It was time consuming and expensive but the check engine hasn’t come back on since Thursday. How’s your car doing?
@davesherman74
Жыл бұрын
@@pleiadianaran I've replaced both check valves since they were both loaded with soot. Replacing one improved the pressure slightly, replacing the other seems to have helped some more. If it doesn't fix it, I may have to take it to the shop to have them clear the injection ports.
@pleiadianaran
Жыл бұрын
@@davesherman74 Luckily I didn’t have to replace the check valves, they’re quite expensive ($270 a pop). What I did have to do though, was replace the Intake and Exhaust VVT Solenoids, I got a P0013, P0011 and P0010, all this within the last 3 months.
@FredTheLutinoCocatiel
2 жыл бұрын
Could've just sprayed a bunch of PB Blaster in there then leave it soak for awhile
@bmak7874
2 жыл бұрын
46,000 miles and having to replace that. GM quality at its best.
@AbaddonGamin
2 жыл бұрын
17 year old suv. LOL that happens
@JayJay-wc6yr
2 жыл бұрын
Ya but it's a 2005 plenty of time for parts to rot hasn't been driven enough
@staceyward777
2 жыл бұрын
My '04 Envoy has 280K miles on it and hasn't thrown this code, but I replaced that exact part a year ago just because I knew it'd eventually fail like his did. As with everything, there are always some duds that come of the line.
@bandittweintraub
Жыл бұрын
my 07' Trailblazer has 203k miles, hasn't seen it (that I know of, and does not appear to have been replaced), however.. my 05' Envoy with 136k has the issue. so :P
@srm113k
11 ай бұрын
18 year old mercedes with 120k miles. Just happened
@Mrfurballs
3 ай бұрын
I have this code on my 4.3 liter chevy s10
@kathyweihbrecht4373
Жыл бұрын
I couldnt find the link withthe parts please and thank you..
@Quis85
2 жыл бұрын
That looks like the same engine as my 06 h3 hummer. Inline 5. My truck doesn't have that. But it does have where if I wanted I could put one on. I have always wondered why that spot was there. Transmission dipstick is connected to it but no blower or whatever it's called. Now I know GM decided they didn't need it for my hummer. Now I'm wondering what was the replaced and why GM decided 06 h3 hummer didn't need it. Nevertheless. Good fix once again. Next Sunday I will be replace evap canister and purge in the front. Code said the front need replacing but I figured I'd just like you did. Replace the whole system. Parts came in today from Amazon lol. Issues was every time I filled up gas tank. It wouldn't start. Unless I floored it and let it rev for a moment. Then it would mellow out. But only happens when I fill the tank all the way. Check engine light didn't come on right away. Then when I used my scanner it said pending. But gave me a code which allowed me to look up the issue.
@AntonioClaudioMichael
2 жыл бұрын
Good work Jimmy @1Road
@Dnasty1
Жыл бұрын
Great video... I am having similar issue to you i believe with a 2010 mercedes e class. I have the code but also my 2ndary air pump makes noise when i start the car so I know it runs. On my car however there are like 3 different valves involved with this thing. There are two check valves (or shutoff valves as benz calls them) for the left and right bank i believe. Then there is a diverter valve which I think is what you replaced here. Is that likely what my issue is? It says the flow of air is low on both banks so I think it would be unlikely for both of those check valves to fail at the same time. I am not really sure what the diverter valve does however.
@floyd27860
Жыл бұрын
My car has the code in the winter, but around spring it goes away. I guess water gets in & freezes. My question is: if I dump the water, will this solve my problem? Thanks in advance
@thelongranger55
10 ай бұрын
just Split them open & scrub with diesel quickly wash with water & air dry them before finally soda blasting the surface oil stains away down to bare aluminum. They will look & function like new again if the seals internally are still good obviously .
@danhambrick6331
2 жыл бұрын
Nicely done Jimmy.👍👍👊
@stevienix3444
Жыл бұрын
you must live somewhere warm. That frame is CLEAN.
@busyboy7635
2 жыл бұрын
Good Job, Good Fix
@pryorkennel
11 ай бұрын
How did water get into it
@spitfire2885
Жыл бұрын
Thanks for the video
@mitmaks
2 жыл бұрын
This is like Chris fix
@kevinleon7772
Жыл бұрын
Hi there! I was taking the rear hose off, and while moving a bit out of the way to remove the nuts, I heard a small crack and saw that the hose had snapped off. Any suggestions? Thank you!
@Pjshipman27
Жыл бұрын
I did get my secondary air valve replaced and the check engine light came back on with the same code. I’m assuming the secondary air pump, the relay to the pump, or one of the oxygen sensors is bad and needs replacing. Ima have my mechanic check it out again and see what he says.
@tariqalghreisi1326
4 ай бұрын
Hello brother I have problem in my car and no body know how to fix it
@SSW1FTT
2 жыл бұрын
My VW Passat ‘10 has the same code. What can I do about it? It’s a 2.0 TSI engine.
@serafinsilva1055
2 жыл бұрын
How are you liking living in Tn? I know it was a huge move and we are considering doing it ourselves.
@walterk1221
2 жыл бұрын
Ivan would have cleaned and lubed the valve for a no-parts-required-Russian-repair... 😉
@walterk1221
2 жыл бұрын
@corey Babcock it appears my humorous reference to Pine Hollow Auto Diagnostics may be lost on you...
@Matt-ki3bn
2 жыл бұрын
I need help sir! Where do i find a valve for 2005 toyota celica!? Please I need one.
@Samson-EC
2 жыл бұрын
My air injection pump is good, my relay is good and my fuse is good. Any idea what to check next for P0410?...thks..jc...and no carbon in diverter valve
@antoniozamora4141
8 ай бұрын
Most common problem they nobody talks about is the connection ports on the actual cylinder block
@donaldlong9649
2 жыл бұрын
great job!
@1RoadGarage
2 жыл бұрын
Thank you!🤙
@donaldlong9649
2 жыл бұрын
@@1RoadGarage You're welcome🤙
@stansummers6259
2 жыл бұрын
Where is the link to Amazon for the parts please sir
@29madmangaud29
2 жыл бұрын
Hey Jimmy, how much did that valve cost? Curious since you've dissected the old one?
@kennylavay8492
2 жыл бұрын
@corey Babcock easier to ask some one. or call parts store.
@heribertoherrera3995
Жыл бұрын
Thanks!
@1RoadGarage
Жыл бұрын
Thank you!! 🤙👍👍
@luiscardona7632
Жыл бұрын
Excelente video.
@jayvian327
Жыл бұрын
I know this is for p0410…. But I need help with P0455 large leak in secondary air system. Would this part cause this code? I have the same identical truck v6. I have changed the vapor canister, fuel filler line, gas cap, secondary air pump and relay. I am still getting the P0455 code. I did a smoke test and it confused me more. I am hoping someone can guide me on what to do next. I recorded the smoke test and can send it if it would help me further
@mercedmedinajr3752
Жыл бұрын
Thanks for this video it help me TREMENDOUSLY. keep upl the good work
@calnaughtonjr343
2 жыл бұрын
I’ve never seen or heard of this particular valve. It looks similar to an idle air control valve. Is that basically what it is?
@danielebrparish4271
2 жыл бұрын
No. It is a secondary air pump valve. The big hose is connected to a air injection pump (fan). When the valve opens it lets the air into the exhaust manifold to burn any unburnt fuel that enters the exhaust system. Their is a relay that allows vacuum to reach the diaphragm on top of the valve which pulls the valve to the open position. So this valve only opens when the engine is at less than operating temperature.
@danielebrparish4271
2 жыл бұрын
@PATRICK John I don.t know.
@pfoxhound
2 жыл бұрын
Star diagnosis on Mercedes - disable it with 1 button.
@nikolajelic2661
2 жыл бұрын
I drive an old Subaru, 2000, 125 hp It consumes abnormally, over 20 liters of petrol per 100 km.. Does anyone know why?
@theboogyman9901
2 жыл бұрын
What's the part call ?
@1RoadGarage
2 жыл бұрын
The part I changed is just called an ‘air injection valve’
@theboogyman9901
2 жыл бұрын
@@1RoadGarage thanks man, that's my next job , am trying to keep it maintenance, these vortec 4.2 motor can last longer with good maintenance 👌🏻
@flowerpt
Жыл бұрын
Thank goodness the politicians mandated ethanol and thus water in the gasoline - keeps the mechanics and parts manufacturers busy!
@sfh2050
2 жыл бұрын
what are the symptoms of air injection system failure? I have the same code for my TB 2004. I have low torque and high revs. Any advise would be highly appreciated.
@bandittweintraub
Жыл бұрын
idle will go wonky, act like it will die, then you shut it off it will be dieseling. (continue to run after the ignition is turned off)
@sfh2050
Жыл бұрын
@@bandittweintraub idle is good, but there is a strange bearing noise from the pump below for about 10 seconds at cold startup then gradually fades away. Idle is at 600 with no vibration. I feel the air pressure is being blocked somewhere because the torque is good. I highly suspect its the valve on top which has gone bad? Also I removed the valve and checked it with 12V battery and I can hear the clicks. Still not sure if its good or bad.
@doughboy1966
2 жыл бұрын
6:50 It ain’t got no gas in it.
@1RoadGarage
2 жыл бұрын
Good eye. Gotta change the pump assembly in tank. Not sending the correct fuel level to the gauge.
@JohnSmith-zt7qo
2 жыл бұрын
What is the purpose of that thing anyway I would have just got the plunger moving and working again and thrown it right back in hahaha so many unnecessary parts on newer cars
@CB-jk3ue
2 жыл бұрын
Haha maybe quit running on the last 8th of a tank. Might help prevent that ethanol rot
@dalejohnson3520
2 жыл бұрын
You could have possibly salvaged this part if you had used a brake spoon instead of a screwdriver.
@1RoadGarage
2 жыл бұрын
I would never want to do that. Fix it right the first time. But that’s just me. 😜
@kirankoli852
2 жыл бұрын
You just clean that rust from valve body. Not to install new one.
@grendle81
2 жыл бұрын
More Farris. Less Jimmy.
@zhangshanna1160
2 жыл бұрын
Hi Jimmy, we are producer from China for this air/smog check valve, and it happens that we are developping this valve now. And i think we can have some cooperation for asking you to test our valve. Can you pls give your mail to contact for further discussion?
Пікірлер: 106