Definitely cool watching you do everything I want to do with one of these. Your the only guys actively putting out decent content on these bikes along with street riding.
@GromBeardo
Жыл бұрын
Yeah, right, like not many people put these on the street. Maybe I'm doing something wrong here🤣 They're too much fun to only be playing in the dirt with them. I appreciate you watching, man! Hope to catch you outside on a ride this season!
@worldrage619
Жыл бұрын
@@GromBeardo do you ride with the central Ohio grom group or the glass city grom page.
@GromBeardo
Жыл бұрын
@@worldrage619 I ride with whomever and whenever possible 🤣. 90% of the time I'm traveling the 2hrs to ride with the Glass City kids. The Central Ohio people don't seem to organize many rides anymore 😭. They're a little closer though.
@marcelinogomez9897
Жыл бұрын
Thanks for the 2022 oil pump and donut!! Appreciate the little note also! See ya at murder the mitten 23!🤘🏽🤘🏽
@GromBeardo
Жыл бұрын
Hell Yeah! See you there, bro! MTM is my favorite ride of the year! Best people ever on that ride🤘
@linksgarage1985
Жыл бұрын
That is sick! 💪🏼like the Tusk enduro kit!
@GromBeardo
Жыл бұрын
I just used the battery part, but man, it stays charged for a long time!
@linksgarage1985
Жыл бұрын
@@GromBeardo good to know!
@PressureGOAT
Жыл бұрын
I can’t believe you even put that little jingle bell horn on that lol just rev the engine that’s loud enough I’d say. Good video thanks for sharing 🎉❤
@GromBeardo
Жыл бұрын
The bell is always good for a laugh. I put them on all my bikes 🤣🤣🤣
@MOTOVADED
Жыл бұрын
wait we dont need turn signals in ohio?! also where about r u? im in cincy/dayton area- love your work! turning mine n my wife's klx110's street legal this month! woot woot~!
@GromBeardo
Жыл бұрын
As long as you use hand signals, you're legally good🤘 At least in the day time, they might have a legal argument at night. I'm up here in Northern Ohio. Medina is the closest "big" city. Love the 110's. I just got a CRF110 last week, waiting on parts to street legal that too😁 Hope to catch you guys out this Summer!
@MOTOVADED
Жыл бұрын
@@GromBeardo sweet thanks! Heck yea 👍
@Smallbore2wheels
Жыл бұрын
All I got out of this is that you want to hold my hand ☺️
@GromBeardo
Жыл бұрын
😘
@KGRowlo
Жыл бұрын
Gotta love ohio laws so simple to convert💪
@GromBeardo
Жыл бұрын
Definitely a plus about Ohio😁
@worldrage619
Жыл бұрын
Ah shit I’m Ohio too.
@GromBeardo
Жыл бұрын
@@worldrage619 dude, get that Grom out and let's ride!🤘
@BornSenior
4 ай бұрын
Sick bike! How did you put the skateboard wheels on?
@GromBeardo
4 ай бұрын
The ends of the axles are drilled and tapped for M6x1.00mm, so they just bolt on🤘
@ryangisabum5576
Жыл бұрын
Hey brother sorry I have a question, I have an ssr 110 would I have to get grom suspension and wheels and tires ?
@GromBeardo
Жыл бұрын
You could just put street tires on it. Hell, that's probably not even required in most states. Ohio just wants the light, mirror, etc... You can buy 12" sumo rims off T-Bolt if you want to do it up more proper👍
@THEWEEDRESERVE
7 ай бұрын
How do you install the axel sliders? Did you have to get a specific axle?
@GromBeardo
7 ай бұрын
The axles are already drilled for M6x1.00mm threads, so it's just a matter of bolting them on. Out of the box they have crappy rubber ones, so I just threw the skate board wheels on instead.
@StevenMx27
2 ай бұрын
Can you put dirt tires on that bike?
@GromBeardo
2 ай бұрын
You can put dirt tires on any bike, pretty much 🤷🏻♂️
@gnappyboy9237
29 күн бұрын
Where did you get those blue covers on the exhaust!?
@GromBeardo
29 күн бұрын
They were on it when I got it, but I did find some on Amazon... amzn.to/3MfWdMI
@gnappyboy9237
29 күн бұрын
@@GromBeardo thank you so much!
@GromBeardo
29 күн бұрын
@@gnappyboy9237 You're very welcome, my man!🤜💥🤛
@jakecorso921
Жыл бұрын
How are u connecting your wires to the tusk box since it’s a connector?
@GromBeardo
Жыл бұрын
I just cut off the connector and crimped on bullet or spade terminals.
@jakecorso921
Жыл бұрын
@@GromBeardo Do u have an instagram i’m gonna be doing a bike in the next week or so and want some help on the way
@GromBeardo
Жыл бұрын
@@jakecorso921 I'm @grombeardo on all the socials 👍
@anthonyrodriguez371
Жыл бұрын
Where did you get wheels ?
@GromBeardo
Жыл бұрын
They come with those wheels when new. TBolt sells wheels. Follow along with my ThumpStar build. I'm converting a dirt bike to street legal. Will have to fit wheels for that build👍
@worldrage619
Жыл бұрын
Do you know your range on a tank of fuel ?
@GromBeardo
Жыл бұрын
I don't, but it's not much🤣🤣🤣 That's on the list of videos to shoot with this thing. I'll fill it up and just ride until it hits reserve. Then maybe just run it dry🤷♀️ I'm looking forward to seeing how far I'll get😁
@IamGl0ryB0y
Жыл бұрын
Hey will the m10x1.00 and m10x1.25 both work for front and back brakes or is there one size for front brake and one for back brake?
@GromBeardo
Жыл бұрын
On mine they were both different. I ordered more and took advantage of the Amazon return policy to send back the ones I didn't need 👍
@josephsaucedo8691
Жыл бұрын
They sell the stators for the lights and wiring harness for the set up for it look under 190cc pit bike parts Amazon the electric start Dayton 190cc model comes with it stock the z's 190 model all come with it as well there the same thing but the z's parts are easier on the wallet 🏍️🛠️💯👍👌✌️🍻😉 ps I wish it was easy and simple to register any vehicle unfortunately California has to make everything difficult. IV been told it's not to bad if you find one already made street legal and register then transfer the paperwork in to California that way it doesn't need to be inspected by the dot or chp office out here 🙈🙉🛠️💯👍👌✌️🍻 have a great one ✌️
@GromBeardo
Жыл бұрын
Ha, nice! Crazy how many parts are available for these things. Cali weather is awesome, but past that, you guys got it rough😬🤘
@josephsaucedo8691
Жыл бұрын
@@GromBeardo yup the laws and rules they make for CA are perty stupid specially the no small gas engine bull shxt . The 190cc are actually not even supposedly allowed here either they won't ship them to California because of the stupid emissions law's and the fact that there race engine. if you get pulled over and they noticed its swapped the bike can be impound and would need to be converted back to stock to get it back on the road. Good thing I have access to a mill and my in graver and punch set was able to make it a 125cc again so I won't run in to any problems lol 😉🛠️ but ya Amazon sell the parts wire harness rectifyer stators so you can run it off the engine as long as it says it's for a 190cc it will work shouldn't be more than 50$ for all of it. I had to swap mine out because I'm running fuel injection and needed more juice for the injection. eBay also has it but some times over priced. The 190cc electric start engine kit actually comes with all of it. Wiring harness and It even has a carb and oil cooler ignition switch even though none of its need when swapping it in to a grom. I used my extra z's engine kit parts and converted one of the Dayton engine that I picked up out of a mini racing gp bike so I'm positive it converts 💯🛠️🏍️👍👌✌️🍻
@brandonkachmar2655
Жыл бұрын
Any suggestions on tire size for 2.5x14 wheels?
@GromBeardo
Жыл бұрын
Shit, I'm not sure. I run 12's on everything. Maybe 90/90 or a 100/90. I think I've seen guys run those sizes.
@HypedOUT
8 ай бұрын
Where did you find this bike its out everywhere i look?
@GromBeardo
8 ай бұрын
I got it over a year ago. They pop up used from time to time. The US distributor is only 45 min from my house😁 I'm not sure where else to grab one from.
@HypedOUT
8 ай бұрын
@@GromBeardo can you give me a link to that please
@GromBeardo
8 ай бұрын
@@HypedOUT wholesale-cycle.com/2023-ycf-sm-f190/
@HypedOUT
8 ай бұрын
@@GromBeardo thanks buddy
@GromBeardo
8 ай бұрын
@@HypedOUT 🤜💥🤛
@VintageSpeedwerks
Жыл бұрын
What about VIN?
@GromBeardo
Жыл бұрын
It has one 🤷🏻♂️ The series I referred to and linked at 00:55 is how I got the title for my ThumpStar and converted it to an MC title. Every state is different though.
@VintageSpeedwerks
Жыл бұрын
@@GromBeardo thanks, I'll check it out!
@GromBeardo
Жыл бұрын
@@VintageSpeedwerks good luck! Hopefully it's a straight forward process where you're at🤘
@VintageSpeedwerks
Жыл бұрын
@@GromBeardo many do what's called a mechanics lein
@GromBeardo
Жыл бұрын
@@VintageSpeedwerks yeah, that's a long drawn out process here. Titles can be a pain in the ass.
@IamGl0ryB0y
Жыл бұрын
Hey does that led headlight react to the high and low beam switch? If not, do you know how I can accomplish a high low beam setup?
@GromBeardo
Жыл бұрын
My headlight switch is on/off. It's a single row LED. I assume if you had a dual row LED that was wired for both, that you could have a High/Low beam setup pretty easily.
@IamGl0ryB0y
Жыл бұрын
@@GromBeardo Sounds good thank you
@IamGl0ryB0y
Жыл бұрын
@@GromBeardo hey I sent you an email, could you take a look and let me know? Thank you.
@GromBeardo
Жыл бұрын
Yep, I replied! I'd love to, but short on time. Way too many projects in the shop, especially in the Spring🤪
@IamGl0ryB0y
Жыл бұрын
@@GromBeardo All good. Any way you could answer a few questions? 1. How did you fasten the battery to the bike? 2. Does the brake light run to the main stock power switch on the bike? Is that switch also connected the battery somehow? 3. Can you explain in more detail what exactly needs to connect to what for the tail and brake lights? Does the pitch hydraulic brake light switch connect to the actual brake light and the battery?
@xempath
Жыл бұрын
Yo @grombeardo, which pro taper bars would you recommend? Thanks
@GromBeardo
Жыл бұрын
Personally, I love the KLX/DRZ110 ProTaper bars. I run them on everything. Nice and wide, makes these little bikes feel less little🤣🤣🤣 It's really personal preference though. I'm only 5'6" and broad shouldered. Taller, skinnier people might fit another bar better.
@xempath
Жыл бұрын
@@GromBeardo I’m 5’9” and I would say normally shouldered Lol. I bought the mini bars on a whim off Amazon but realized they are kinda low. Deciding on weather I should return them and get the ones you mentioned
@GromBeardo
Жыл бұрын
@@xempath the protaper website lists the dimensions of there bars. I think the bend is similar, not sure about height though 🤷♂️
@xempath
Жыл бұрын
Hey dude I’m trying to figure out what levers to swap from the stock. I kinda don’t want to keep the same perches since they have those holes where the stock mirrors were. Any suggestions? I picked up some cheap shortys off Amazon but I saw there were some levers that came with the perch should I get those or?
@GromBeardo
Жыл бұрын
@@xempath man, I don't know. I've still got stock ones on mine. I haven't looked into changing them up yet.
Пікірлер: 76