Thanks Robbie, really pleased with the lamp so much easier.
@bobbell5265
Жыл бұрын
My lamp arriving today 👍
@bobbell5265
Жыл бұрын
Awesome bit of kit Lindsay t....thanks for the link....3 dozen buzzers tied with ease 👍
@lindsayiflyfish
Жыл бұрын
@@bobbell5265 Glad you like it pal its the little things that make tying a wee bit easier.
@terrycousins3015
Жыл бұрын
I purchased one from Amazon several months ago,brilliant investment ,no more worries about batteries running out!
@lindsayiflyfish
Жыл бұрын
I have been very happy with it pal.
@derickhannant9253
Жыл бұрын
Excellent again Lindsay. Relatively new to fly tying since lockdown but about to step into learning buzzer tying. This advice will, I’m sure, help me on my way. Tight lines. Derick.
@lindsayiflyfish
Жыл бұрын
Glad it was of use buddy.
@allanhughes945
Жыл бұрын
Excellent advice Lindsay 👍🏻
@lindsayiflyfish
Жыл бұрын
Glad it was helpful!
@mdflyfishinguk5220
Жыл бұрын
Hi Lindsay purchased one of the lamps, i have other lighting options like a bug-bond torch and a laser pen etc, but as a hands free UV light its working out very well with me only having to rotate the fly in the vice. I looked at other similar lights. but you were talking £40-60. Cheers for the link Regards MD
@lindsayiflyfish
Жыл бұрын
Hi MD, over the moon with mine it was a great find.
@mikejames663
Жыл бұрын
Lindsay, that's excellent, beautiful finish, just ordered the lamp, thanks.
@lindsayiflyfish
Жыл бұрын
Awesome! Thank you!
@briandonald8606
Жыл бұрын
Thanks for video and new lamp and how you finish your buzzers. Will have to get one of these lamps and try again. At moment wife has banned me from using resin. Due to the problems I have had recently.
@lindsayiflyfish
Жыл бұрын
Brian, thats fair to be honest you should always put your well being first.
@burtonbrocious171
Жыл бұрын
❤ your videos lindsay tks
@lindsayiflyfish
Жыл бұрын
Thanks 👍
@neilandrew961
Жыл бұрын
Great video again sir managed to get a bottle of solarize and love it if I am doing a good few buzzers I have one of the nail lamps i put all the buzzers in after giving them a quick zap with torch works a treat
@lindsayiflyfish
Жыл бұрын
I did try that years ago and as you say it does work. The one I had was only cheap and it broke.
@harryboyle9920
Жыл бұрын
Many thanks for posting the video’s……..Very informative. Have never used uv resin but fancy trying it out. Can you please repost the link to the Amazon UV Lamp. Many thanks..👍👍👍
@lindsayiflyfish
Жыл бұрын
Hi Harry the link is on the description under the video buddy,
@harryboyle9920
Жыл бұрын
@@lindsayiflyfish Hi Lindsay……..Thank you……………I have seen seen this link and thought that it would direct me on to Amazon And the Lamp… Have clicked on it several times but all it does is take me on to numerous many video’s but not to the lamp. Any suggestions would be welcome……..athank you..👍👍
@lindsayiflyfish
Жыл бұрын
@@harryboyle9920 try this
@raymondmichaellarkin6455
Жыл бұрын
Well done Lyndsay, one of the best-Ray Ex 3 Para
@lindsayiflyfish
Жыл бұрын
Good man 👍
@marcinsobolewski5285
Жыл бұрын
Great video, as always. Would you mind sharing what vice you are using? Or if you could recommend a similar one? (I'm using one from a Veniard starter kit and omg it's bad... really, really bad)
@lindsayiflyfish
Жыл бұрын
Hi Martin, I am using the FNF Talon I have been very pleased with it 👍
@marcinsobolewski5285
Жыл бұрын
@@lindsayiflyfish thank you, much appreciated
@50Squirrel
Жыл бұрын
Great video….I’ll be getting that light!
@lindsayiflyfish
Жыл бұрын
Glad it was helpful 👍
@fliesbychris
Жыл бұрын
Perfect!! I still haven't found anything better than solarez, definitely the best on the market. 2 coats of solarez and 1 coat of Sally diamond hard for me. Crackin vid Lindsay, it's difficult to get a good smooth finish on a buzzer when you start tying, cheers for pointing me in the right direction!! 👍
@lindsayiflyfish
Жыл бұрын
Good stuff! The coat of super glue before you start makes a difference IMHO.
@daviethevaper
Жыл бұрын
and another one who went and bough that UV light , i did see the one Rhys Fishes suggested as a xmas gift idea , but £80 was a wee bit rich for my Scottish blood (specially as it just looked like a rebranded made in china item) and now again Lindsay you brought us all a bargain ( last time was them scissors from Italy , which i also bought )
@lindsayiflyfish
Жыл бұрын
Davie you just have to add fly fishing to anything and you start paying a premium.
@bigiaindiamond
Жыл бұрын
Lamp looks like the perfect solution to the issues you addressed in video . Saw a video by Rhys Wadley where he mentions a mains lamp/torch but the ones I seen were silly money . Ordered via your link . Arrives tomorrow . Look forward to trying it
@lindsayiflyfish
Жыл бұрын
Agreed saw some similar for silly money. I think you will be very pleased I am.
@bigiaindiamond
Жыл бұрын
@@lindsayiflyfish Lamp arrived today, Tied up 4 buzzers when I came in from work to try it . I'm impressed . Cracking piece of kit for a very reasonable price
@lindsayiflyfish
Жыл бұрын
@@bigiaindiamond Glad you like it, I am really pleased considering the price.
@robertalp3878
Жыл бұрын
Like the lamp, Lindsay, do you have to avoid any exposure to your skin? Cheers
@lindsayiflyfish
Жыл бұрын
I would always advise to minimize contact with the skin and avoid your eyes always.
@JoeBillingsley
Жыл бұрын
Great video as always, Lindsay. Why do you put super glue on before the resin? Joe
@lindsayiflyfish
Жыл бұрын
There are a couple of reasons Gary. I think the super glue seals the fly better before adding the resin. Super glue is much cheaper than resin so you save a bit there. Hope that helps Joe.
@garymartin7623
Жыл бұрын
Hi lindsay. Is there a reason you put superglue on before the uv resin and not just use uv resin from the beginning. I use uv resin the seal with varnish. I was just wondering if there was an added benefit to the way you do it.
@lindsayiflyfish
Жыл бұрын
There are a couple of reasons Gary. I think the super glue seals the fly better before adding the resin. Super glue is much cheaper than resin so you save a bit there. Hope that helps buddy.
@sneddon1234
Жыл бұрын
Got one from your link thanks for your info 😊
@lindsayiflyfish
Жыл бұрын
Hope you like it!
@lindsayiflyfish
Жыл бұрын
Hope you like it!
@sneddon1234
Жыл бұрын
@@lindsayiflyfish as you say if you don't use the torch the battery runs out as with the light perfect 👌
@robertfrancisco1193
Жыл бұрын
do you find using uv resin on some flys to help keep them lasting longer. n
@lindsayiflyfish
Жыл бұрын
Yes on certain flies it can extend their lives.
@robsmith8024
Жыл бұрын
Hi Lindsay, great content as ever & I’ll be ordering the UV light. I have an ask, you could be the 1st and hopefully the other tiers on KZitem will follow suit - can you explain at the outset why you use a certain thread for certain patterns (don’t mean size) most vids start off with “today I’m using uni thread, semperfli, UTC, textreame etc but nobody ever explains why. Cheers
@lindsayiflyfish
Жыл бұрын
Hi Rob, many thanks I will try to remember It is usually two reasons colour and strength.
@peterbagshawe2534
Жыл бұрын
Tried the superglue, does seem to work to seal. Thanks for the tip and great video.
@lindsayiflyfish
Жыл бұрын
You're welcome!
@michaelshaw8370
Жыл бұрын
I think we all have had horror stories with varnish bottles knocking an open bottles over ruining a favourite cape or a unnoticed crack in a lid causing a leak. Sally Hansen has some uses as do the old fashioned styles of varnish. Mainly reduced to backup duty when UV resin is in short supply. UV is certainly the way of the future. Yes you could knock over a bottle, drop it, or only the once accidentally forget to fail to turn off the UV lamp while applying that second or final coat. Even with resin if doing a batch a small rotary device could have you drying a dozen buzzers at once. To each their own. As for subscribers it will take time to get there, but you totally deserve to reach and exceed the one hundred thousand mark. That award would look great over your bench.
@lindsayiflyfish
Жыл бұрын
I live in hope Mick.👍
@eddieahara6605
Жыл бұрын
Lamp already ordered 😊
@lindsayiflyfish
Жыл бұрын
Hope you like it!
@keithmarshall8478
Жыл бұрын
You didn't mention how long the lead is on the light as sometimes you can't always have the fly tying desk next to a plug socket
@lindsayiflyfish
Жыл бұрын
Hi Keith, I think the cable is around 3' from the top of my head but the exact measurements will be on the link in the description.
@Loyalist-ul6qm
Жыл бұрын
I use the wife's nail uv nails light it work's a treat.
@lindsayiflyfish
Жыл бұрын
Great stuff, if it’s not broken then don’t fix it 👍
@ibelieve1468
Жыл бұрын
Just ordered one, you can thank me later lol
@lindsayiflyfish
Жыл бұрын
Thanks 👍
@barrywatson2898
5 ай бұрын
5 coats of cellire, 24hrs between coats
@lindsayiflyfish
5 ай бұрын
Life is to short 😉
@oldgold5848
Жыл бұрын
Chironomids even...
@lindsayiflyfish
Жыл бұрын
Thank you will change that now!
@Ayrshirechap
Жыл бұрын
Chironomid is not pronounced chromonoid just saying could be misleading to novice anglers
Пікірлер: 73