That sapphire upgrade makes a huge difference. I'm still working up the courage to try crystal-swapping myself but sheesh, those are tempting results.
@frmdablockboi3436
Жыл бұрын
It’s literally so easy just get nitrile gloves so you don’t leave fingerprints
@Chewee394
3 ай бұрын
Dropped mine off the counter cracking the original crystal. Time for a sapphire crystal!
@matyasd007
2 ай бұрын
You compromise the water resistance
@WH250398
7 күн бұрын
@@matyasd007 Nope. If you correctly replace it you won't. The rubber seals are what make the watch wateresistant.
@spicydragon3881
2 жыл бұрын
That looks great and I agree with you on the smooth bezel. When I saw the fluted I actually yelled, noooooo! I, like you have very little experience modding, but I have done some and its fun . . .when it goes right. I am in process of fully modding ANOTHER square G-shock, with sapphire screen and everything titanium. I think the wife is starting to lose some patience at this point though, so after this one I think I am done for a bit. Great job, wear it well. Cheers
@varghejo
2 жыл бұрын
Love to see you still do mod videos. I'm always blown away at how much clear AR coated sapphire improves the look of a watch.
@ikirikchi
2 жыл бұрын
It’s a pity that Strapcode doesn’t make jubilee bracelets with “golden” center links for all models. I had to buy a full steel jubilee Strapcode for my Seiko SNZH57 (the one for Kamasu fitted well), although the two-tone one would look much better.
@WatchmakerErik
2 жыл бұрын
I was thinking the same thing. I wonder how hard it would be to gold plate the center links...
@moorwatch9654
2 жыл бұрын
@@WatchmakerErik could you buy two bracelets (gold and silver) and swap the centre links out?
@WatchmakerErik
2 жыл бұрын
@@moorwatch9654 it depends on how the bracelet is held together but I suppose you could.
@wheel2man
2 жыл бұрын
@@moorwatch9654 From my experience with the jubilee bracelet, I believe that would be quite possible. Those center pieces are separate and can removed when resizing the links(or flipped as I accidentally found out.) Be carefully as I believe this bracelet uses those tiny retainers for the pins. They are super easy to lose if you don't expect them. Edit to say I looked again and it looks like the pins for the non removable links are inaccessible. Maybe there's another way, but I don't know for sure.
@michaelkruszynski8524
2 жыл бұрын
Awesome! I bought the equivalent bracelet from Strapcode for my "Seitona" and it is awesome. I'm hoping (though doubtful) that they'll release a 2 tone jubilee for the DressKX 🤞
@gagazzo82
2 жыл бұрын
Have you any pictures?
@michaelkruszynski8524
2 жыл бұрын
@@gagazzo82 of the Seitona? I can take some. But I don't know if I can post them as a YT comment
@BetamaxBabe
2 жыл бұрын
I love my SRPE 63 (currently on an Uncle Seiko President-style bracelet), and this gives me the confidence to upgrade the crystal myself.
@Sov92
2 жыл бұрын
I might have went with a two-tone bracelet, but beyond that I think it looks great.
@Huwberts_Emporium
2 жыл бұрын
Please let me know if you know where to find one, I've been searching
@Sov92
2 жыл бұрын
@@Huwberts_Emporium you can find one on strap code
@acomingextinction
2 жыл бұрын
@@Sov92 not for the dresskx, just the 5kx. different lug widths.
@Sov92
2 жыл бұрын
@@acomingextinction It isn't a 22m lug?
@acomingextinction
2 жыл бұрын
@@Sov92 nope. dresskx has 20mm lugs.
@Box_13
2 жыл бұрын
Sharp and the bracelet looks worlds better. It really lets the head of the watch show off.
@johnsmith-gs4qf
2 жыл бұрын
Beautiful classic look to that watch! I want one!
@es-jayjones6595
2 жыл бұрын
Nice job! Frankly I'm shocked that the Strapcode bracelet didn't add significantly to the weight. They're great straps. I changed out two rubber straps on my Samurais for their Hexads. My left arm is now a few millimeters longer.
@WATCHingJames
2 жыл бұрын
Great job. Makes me want to try a mod myself.
@JasonTheWatchGuy
2 жыл бұрын
Very subtle, yet effective changes here! Very nice! Personally would have gone with the fluted bezel
@Happy357mag
2 жыл бұрын
One of the great things about modding, nothing is permanent and anything is possible. I would have went with the fluted bezel and if possible a two tone J bracelet.
@AwkwardHorology
2 жыл бұрын
Been waiting for this one since you bought it last year!!
@JustOneMoreWatch
2 жыл бұрын
Yeah, ummm, only took me ten months..... 🙄
@AwkwardHorology
2 жыл бұрын
@@JustOneMoreWatch haha still worth the wait!
@gregcarterfineart
2 жыл бұрын
That's a gorgeous mod, good on you leaving the bezel 'stock'. Love it!
@UnburdenedByWhatHasBeen
2 жыл бұрын
I bought the BOR bracelet for mine. Looks great.
@MarkSmith-pd6fk
Жыл бұрын
Wears surprisingly really well & comfortable on the wrist. Perfectly ok as is so even though the jubilee looks good there's really no need to mod. Mine has been mistaken for a Rolex a few times..
@Mr_Memer.876
2 жыл бұрын
Worth noting the strapcode bracelet only tapers 2mm from 20mm to 18mm. You can get a 20mm to 16mm jubilee from Long Island Watch which suits the watch better, but you may want a better clasp too.
@mikehowells7746
2 жыл бұрын
I've got that bracelet on my mini turtle, it does feel like real quality, although it needed a bit of tweaking with a Dremel to make the end links fit.
@TheTonyspoons
2 жыл бұрын
Got the double domed Namoki crystal (clear AR) on my grey SRPE51 as well, really makes the watch pop and I have it on the bracelet again now. When it was the standard hardlex I thought the dial looked a bit drab against the steel bracelet.
@swiftyrich
2 жыл бұрын
Small added advice: If removing or tightening the crown step with pliers like that, make sure you grip it as close to the corwn as possible, if you're holding it near the business end and the pliers slip and round off anything, you'll really mess up the stem. Oh, and that die getting stuck and almost wrecking the chapter ring made me wince XD
@jacdavis
2 жыл бұрын
Great video, however I think I'd have gone with the fluted bezel. It would have complimented the jubilee bracelet really well.
@IceDree
2 жыл бұрын
I've had mine for almost a year now, but I can't get myself to mod it just yet. I'd love one of those sapphire crystals with the distortion effect, but I don't want a top hat. A strapcode oyster bracelet & a knurled crown are on my radar as well. I'm tempted to swap out the rotor and the day/date wheels, but my watchmaker retired and I don't trust myself to do it. Excellent work, Jody.
@TimeForAnotherWatch
2 жыл бұрын
Nice job Jody, looks much better now, looks great on either the new bracelet or the leather.
@JustOneMoreWatch
2 жыл бұрын
Thanks mate! I think it'll stay on the jube. Or maybe Barton rubber.... 🤔
@statlerwaldorf7130
2 жыл бұрын
Hey Jody, great video, thanks for making it look easy. Gives me more confidence to have a go myself. Just ordered the stuff for the Duro having watched that too, mod's oh no, here I go down another rabbit hole!!! :)
@turnbasedtoddy7664
2 жыл бұрын
This is great! Long Island Watch makes a great oyster bracelet for it as well. I got one and love it.
@tarasmathers7423
2 жыл бұрын
Tell me about it!!! I do not own a timegrapher, and as a result, just spent a little over 2 weeks of adjust, then let it run for a day....then adjust again, and.... you get the picture. From time to time though, I have got lucky and got it just about right, on the first or second try. One thing I did learn from doing this a few to many times, is to etch a little mark in the movement, at the starting point first, before I make any adjustments, as a reference point. LOL. I think it's about time though, to just break down, raid the ol' piggy-bank , and buy one. Keep up the good work, Jody. Cheers....
@davidrosenblum2178
2 жыл бұрын
It looks a champ and it was fun to watch you tweaking the movement. Done that several rimes myself! Cheers!
@ericm7335
2 жыл бұрын
I would have done everything you just did, but I'd recommend the two tone bracelet from strapcode. Good job Jody!
@fearisthemindkiller
2 жыл бұрын
Another really clever nice mod for dresskx is a thinner all steel case back, seen plenty of guys on forum switch out the hardlex display case back for that and shave over a 1mm off the thickness and all say it wears really well/better than before
@JessicaKStark
2 жыл бұрын
I just picked up a Timex MK1 Mechanical, and I've seen you've done a bunch of other Timex and Field Watch reviews in the past. Would love to see you take a look at one sometime!
@glennpettersson9002
2 жыл бұрын
The leather strap really makes the watch pop, it looks great.
@AardvarkAdventure
2 жыл бұрын
FINALLY somebody who agrees that a two tone watch doesn't always need a two tone bracelet!
@JustOneMoreWatch
2 жыл бұрын
Yeah, I was happy to 'tone' it down a bit. Boom tish!
@stusims6567
2 жыл бұрын
Love this watch, but I’m to old to fiddle with mods.
@YoungMacy
Жыл бұрын
@@stusims6567 only if you say so brother!
@rayharrison6400
2 жыл бұрын
Very good enjoyed that. The sapphire looks awesome. I would have been tempted to put the fluted bezel on. Nice job on the timing too, that's an OCD box ticked. The bracelet looks fabulous. I like it a lot, nice job
@johnheng3277
2 жыл бұрын
This watch looks almost the same as my Tudor BB41 S&G with fixed gold bezel and black dial which I have changed to a brown leather strap like the one in the video just today. I was wondering if the brown leather strap is suitable on black dial and gold bezel watch and I haven't worn it outside of house yet. It's such a coincidence that you released this video so that I can see it looking fantastic on your wrist. So I'm going to leave the house soon and see how it goes with my new strap on my old watch that is originally come with the 2 tone jubilee bracelet. Thanks for your video!😊
@wj6782
2 жыл бұрын
Love StrapCode... have the exact same bracelet for my Duro. And I'm very happy. Haven't gone to saphire... Yet. Don't have the tools on hand.
@mr.eswatchreviews
2 жыл бұрын
I think you did a right decent job I would have went ahead with the fluted bezel though
@HotelBravo556
11 ай бұрын
Great video! Gold/gilt ain’t my thing personally, but super engaging video. I LOVE my SRPE61 (anthracite sunburst dial) on a jubilee. I’m convinced it’s the best most versatile everyday watch for those with a sporty style. I can’t take it off.
@madness694
2 жыл бұрын
I put one of the namoki thin casebacks on mine, reduces the WR but the new thinner profile is very worth it!
@bagpiper
2 жыл бұрын
Very informative. Has me eyeing a few in the collection and thinking 'I could improve that by . . .'.
@Y0u7u8e.
2 жыл бұрын
Loving the T shirt, man! I need to get hold of one.
@tom1399
2 жыл бұрын
These watches should be Seiko's version of the datejust, and come in 36/38/40 sizes!!! A size and fit for everyone! They'd be even more popular.
@LiamMcManusGuitar
2 жыл бұрын
You should be a TV presenter, so easy to listen to and fun to watch
@Hrethgir
2 жыл бұрын
I think the fluted bezel would have been an even better way to play with the light, and matched better with the crown. But not my watch, so glad you like the end result! It looks great!
@fbcfnh
2 жыл бұрын
Beautiful mod. I love the smooth bezel.
@THX-C
2 жыл бұрын
That was impressive! Thanks for showing how it’s done.
@stavros_katsopr
2 жыл бұрын
"...but if i ever bought a datejust, to be honest, i'd go for the smooth bezel..." ...with you 110% mate!
@steaksbeers
2 жыл бұрын
It saves a $200 watch from looking like a $100 watch, nice mod that will keep the watch looking sharp for years to come.
@darrenjones2070
Жыл бұрын
Nicely done beautiful seiko. Congrats on the mods.
@23727bgk
2 жыл бұрын
Jody, you have proven an important point when it comes to modding many Seikos. In terms of money spent, it makes much more sense to buy a Chinese homage for less money that essentially comes modded from the factory!
@Rch_P
2 жыл бұрын
Personally would’ve used the Uncle Seiko Jubilee for this. Female endlinks, better taper & much smaller clasp.
@Dialandhands
2 жыл бұрын
Wow! This looks much better without the extra gold on the bracelet. I have two dresskx. One guilt with a jubilee bracelet and One black with an oyster bracelet. I got my bracelets from Mark from Long Island watch because they taper to 16 mm instead of 18 mm like the strap code that you have.
@ozludo
2 жыл бұрын
Really nice - a bi-metal jube would be nice, but I'm not sure Strapcode make one. Glossy Milanese might be cool too.
@danielleclare2938
2 жыл бұрын
Needs the gold tone center links to tie it together otherwise it looks lost on that bracelet. Fun mods put some interest into collecting so all good IMO.
@zak_7354
2 жыл бұрын
That leather strap transforms it even more 👌
@tonyel99
2 жыл бұрын
Great job! Always love to see your mod videos.
@rbkawabe
2 жыл бұрын
Awesome job! If that was the stock SRPE I would buy one with no regrets.
@BlindProphet413
2 жыл бұрын
Another great mod video Jody! It does look better with the sapphire, and good call on keeping the original bezel. What happened with that small seconds "build it yourself" you were going to make along side the dive watch you made from Ali Express parts? I bought the same parts but I'm having some trouble and was hoping to see your assembly video.
@hcwm2
2 жыл бұрын
You said yourself that you would prefer a taper down to 16mm and a smaller clasp. Same here. For that reason I bought the fitted j-style bracelet from Longislandwatch. Quality is just as good as the strap code one, ist is just way more elegant and weight appropriate for the DressKX.
@jonharvey6295
2 жыл бұрын
The tophat crystal from Crystal Times works so well with the dresskx
@d7r_tv
2 жыл бұрын
Great! was waiting for this. The sapphire crystal really great. Personally not a fan of jubilee bracelets would have gotten the typical 3 link OR the one with the open circles. But great work on the mod.
@Happy357mag
2 жыл бұрын
A two tone J. bracelet with the fluted bezel and sapphire would have made a killer DressKX!
@LorDofPrileP
2 жыл бұрын
Great job as always. Personally I would change the dial to something less sporty
@michaeloneil3653
2 жыл бұрын
Nice tasteful mods. Would love to see it with the fluted one day
@mariacruz-tx5mk
11 ай бұрын
I've been wearing Seiko watches since the late 70s😊
@saadparekh
2 жыл бұрын
Should have gone for a two tone jubilee. Plain silver jubilee looks a bit odd. Though it looks awesome with that leather strap.
@rydock
2 жыл бұрын
The Namoki bracelet tapers down to 16mm. Should've went with that and changed out the clasp with something else. Strapcode makes nice end links, but I wish their bracelets would taper properly.
@HirooKoslov
2 жыл бұрын
I would've added a metal black/gold chapter ring, and perhaps a titanium caseback to shed a few grams (if the cost is worth the slightly lower weight for you), but otherwise, looks pretty good.
@johnlim9865
2 жыл бұрын
jody, love yr tshirt where u get it. always enjoy the watch u showcase and also so many lovely tshirts u have
@andresguerrero2989
2 жыл бұрын
Lovely job jody, I personally stay away from mods, i cant have a watch without the factory set perfection and cleanliness. Anyone else?
@KaiserSoze679
2 жыл бұрын
I have the gray dial, but would love one of those two-tones (and a blue one) but I can't justify buying 2-3 of the same watch when my collection is still relatively small (12.) +1 on the Strapcode jubilees (I have one on my Kamasu) but I wish it was two-tone to go with the watch itself. Otherwise, very nice.
@kingsford73
2 жыл бұрын
Lol you've modded very similar way to what I did to my one, totally transformed the watch. I should have gon with the jubilee bracelet instead of the submariner vibe. Good job 👍
@gopherproxy
2 жыл бұрын
Doood - now you'll only need to mod your Seiko-Tee into a dinner jacket 😄😎🤟! Cheers, mate 🥂⌚️!
@richardshaw1968
2 жыл бұрын
Have you seen the new bracelets for the citizen Promaster divers from Long Island they look very good…just need to start doing some for the ny0040…
@TonezzUK
2 жыл бұрын
I picked up the gilded green dial Middle East version of this, it definitely needs the jubilee to replace the hollow creaky Seiko bracelet.
@valengreymoon5623
2 жыл бұрын
I'd have gone with the two-tone bracelet.
@holtmoore5313
2 жыл бұрын
Beautiful job, well done.
@MrShinobi797
2 жыл бұрын
Well Done Jody...well done 👌
@GarySleep
2 жыл бұрын
Needs a 2 tone jubilee for perfection
@charles_the_elder
2 жыл бұрын
I replace hardlex with sapphire on every Seiko I work on. It always makes a huge difference.
@111111111Tiger
2 жыл бұрын
great job J
@diydad7704
Жыл бұрын
Namoki really are a great supplier. I'm always baffled how i can get things from the far east (Singapur) at my doorstep in germany in three days while it takes a whopping four weeks from the far west (California). 🤯 Have fun with your mod.
@johnsrabe
2 жыл бұрын
I’m surprised by how much difference the crystal makes. (Shouldn’t have been.) Interesting (to me) how removing the two-tone bracelet actually makes the watch more elegant. Maybe by making the eye focus on the gold on the watch head? Thanks for the how-to!
@rubensanmaurodelbosqur1950
2 жыл бұрын
Bonito reloj ⌚️ Seiko. 👏👏🤩🤩
@sl8ight_yt
2 жыл бұрын
Definitely would have opted for a two tone jubilee
@grahambawden4060
2 жыл бұрын
I think a 2 tone Jubilee bracelet would have set it off better as you kept the gold bezel and crown. Very simple if slightly expensive upgrade to make the watch an every day dresser. Nice video Jody keep them coming. 👍⌚😎
@darthgriff
2 жыл бұрын
Damn i wanted to see that fluted bezel
@timmanning5357
Жыл бұрын
Job done! Very nice mods 👍
@overkillbliss6535
2 жыл бұрын
Nice, though I'd prefer the flutted bezel with the jubilee bracelet.
@gynechiatrist
2 жыл бұрын
Jody!!yes it looks way better. Thanks for the video. Thanks for the Amazon/Strapcode tip!
@MrShoryuken1
2 жыл бұрын
Have you got your hands on the new Christopher Ward C60 Trident Pro 300 yet Jody? I hear they sent them round the reviewers this month? I just pulled the trigger on a 40mm, black dial on the bracelet. Finally, a CW with a decent logo at 12 o'clock where it should be!
@hunwa425
2 жыл бұрын
I'm in the middle of modding my srpe!! Fun video
@nightfire540
2 жыл бұрын
My blue dial will be here Friday!
@jamessmith6402
2 жыл бұрын
Well done the mod look’s great 👍 thanks Jody
@mikedandurand3548
2 жыл бұрын
I just bought a new Seiko szsb017 to find it running +35 spd. Couldn't return it because it's in spec but can't have a watch running like that. Well you're right about not trying to regulate it without a timegrapher. Also 67 year old eyes. Long story short I now own a non running brand new watch. Balance wheel just stopped and won't go. Never again.
@Hard_7_Iron
2 жыл бұрын
Nice job…looks nice.
@joelyoung9519
2 жыл бұрын
Awesome! In my humble opinion I’d love a few more mod videos and few less unboxing videos 😁
@hiltonr1845
2 жыл бұрын
Nice little mod mate , well done 👍
@SerialWheeler
2 жыл бұрын
Very good looking. Waiting for the service of the seller to re-allign the chapter ring under warranty. Have the sunburst grey SRPE51 and although I think the stock bracelet is ok, that jubilee does make a huge difference. Will probably get the saphite when I do actually scratch the crystal. Great vid!
@MarcoCarag
2 жыл бұрын
Looks awesome! I have the very beefy StrapCode Angus-J Louis bracelet for my Alpinist, and while I think it's probably the most beautiful and well finished of bracelet options for the watch, it's too bulky and the protruding end links make the watch a poor fit for my tiny wrist. I know they've since launched a much more "normal" sized Super-JUB II (🤣 at the naming); but it still has those protruding end links. 😞 Love these mods, though, and it's making the DressKX a tempting purchase! That said, for those with more average wrists, I do think it's the best option (have tried Parnis, Uncle Seiko, and generic hollow end link bracelet from eBay).
@justinbowe38
2 жыл бұрын
Should have gotten the 2 tone jubilee. I got it for my alpinist
@JustOneMoreWatch
2 жыл бұрын
Aye, they don't make one for this mate. I think less might be more with two tone though!
Пікірлер: 229