Thank you all for the feedback! Just added BATCH #3 to the pre-order so grab you CineBack while you can! camerafoundry.com/products/cineback-fx3-fx30
@EB-if2px
11 ай бұрын
Any discount code?
@JuanKharlox17
11 ай бұрын
Make one for the canonr5c please
@LingvaFestivalo
11 ай бұрын
The link to CineBack in the description doesn't work, and some others too (the ones ending in "...")
@Tater2018
11 ай бұрын
Please make this for the A7siii!!!
@lpbarreiros
10 ай бұрын
pleeease, make it for a A7S2
@TechLineHD
11 ай бұрын
Caleb Pike is a creative genius. He is Gianni Versace of camera rigs.
@dslrvideoshooter
11 ай бұрын
Ha! Thanks man!
@iComplainer
11 ай бұрын
Thanks for my next ai art prompt
@thejessence1
7 ай бұрын
Sorry, what was that? Couldn't hear you over the slobbing sounds. 🤤
@Ranger7Studios
11 ай бұрын
The fact that you are custom building these, mad props to you sir! Looks fantastic.
@orangephotos3732
11 ай бұрын
One for the S5II would be amazing!!! Love your work
@JosephBaca813
11 ай бұрын
I agree!
@jarethfedere9553
11 ай бұрын
Would love this for Lumix S5IIX / S5II / G9II!
@JeffreyDeanAnderson
8 ай бұрын
Same
@camerachris
11 ай бұрын
I like it, but I also like having the XLR’s on my handle. It also would have been better when this camera cam out instead of after I already spent tons of money on all the other things I’ve bought to rig it out. I’m sure you’ll have no problem selling them though.
@eli90s13
10 ай бұрын
I can't wait for the ZV-E1 version! I'll definitely get that!
@AronBagel
11 ай бұрын
I had no idea this was in the works, but I ordered it even before watching the video in its entirety. This is exactly what I've been looking for!
@bluestrike7184
11 ай бұрын
Looks amazing! gonna insta buy a S5IIX Model
@paulfriedman
11 ай бұрын
Looks like a great product! So stoked you're making camera modifications like this. Is there a way to make a similar model that works with the audio top-handle? I realizing mounting is the problem, possible to use the side 1/4"-20 to secure it?
@ryanbennett2650
11 ай бұрын
YES this too! I would want to use the top handle at times.
@antone9751
11 ай бұрын
Me three!
@FlyingLapMedia
11 ай бұрын
Liking for the 3.5" floppy prop. Super fun.
@geoffroydubreuilyoutube
11 ай бұрын
That would be so perfect is the top plate will allow the use of the handle, it's a big lose to not have those xlr on it (at least for me). Would be awesome to have it work with the handle, definitely buying one if that happens.
@thenonadventure
8 ай бұрын
I hope to see a version of this for the Tilta cage.
@benvallance2057
11 ай бұрын
When you get the R6 version done, I will be buying one.
@ChoaYeon
11 ай бұрын
this would be amazing if you make a NPF mount version, for people who use NPF batteries to power our camera. have PD usb c power/d tap
@jakebaine
10 ай бұрын
Kicking myself for not buying this when there was still availability. Looking forward to picking this up next year.
@matadormartin
11 ай бұрын
This looks great. Would actually pair extremely well with an R5c given that mounting a larger battery is more or less essential.
@framewavemedia4831
11 ай бұрын
Appreciate how clean this is, but I've stopped using dummy batteries because they offer no power redundancy. Unless you're constantly watching your Vmount levels your battery can and will fail and when that happens it corrupts your file. Maybe in future versions there is an option to use USB-C power with a USB Vmount plate.
@BenDavies1991
11 ай бұрын
Or just use the usb C on the smallrig v mount battery?
@AronBagel
11 ай бұрын
Kondor Blue has a d-tap to usb-c cable that I’ve been using to power the FX30, while keeping the standard battery as to enable hotswapping.
@patrickmalec8419
11 ай бұрын
Now this is slick. Puts tilta/smallrig to shame. This kind of design philosophy is what filmmakers/content creators have been wanting, neigh, deserving for a long time. *cough cough* black magic design *cough cough*
@danielirvine7468
11 ай бұрын
This is cool man ! It kinda makes the fx3 look like a beast would be cool to use this for those clients that think bigger is better 😂
@reconadventures9257
11 ай бұрын
Love the look of this . One thing stopping me from ordering is not compatible with the xlr top handle 😢. Maybe something to come in the future
@jamesbridges1107
10 ай бұрын
add a gold mount I'll but it today!! Great work
@references2707
11 ай бұрын
Was hoping there would be a 3D printable version similar to what you provided for the previous cineback.
@weshootfilms
11 ай бұрын
Would love this for the Sony A74
@timebendpictures
11 ай бұрын
Absolutely amazing Caleb! This is just the product I’ve been hoping for! I’m so stoked to buy one for my A7sIII 😁. Keep up the amazing work 🙏🏻
@LycheeMonstaMedia
3 ай бұрын
I wish something like this were out for my z8.
@Bikman
11 ай бұрын
no matter how hard they try to make a small camera we are the people here to make it bigger and crazier🙋♂
@JaymesMedia
11 ай бұрын
Dang, I was hoping you’ll have one for Fuji or other systems.
@serghios
10 ай бұрын
need this for my little fuji h2s
@mauriziopepe5016
6 ай бұрын
Beautiful project congratulations, is there a version for the Sony A7IV? thanks and congratulations again.
@retsamasmr
11 ай бұрын
This is incredible 🙌 seriously good effort! 🎥
@filmstueberl_videoproduktion
11 ай бұрын
Love the design of this rig❤
@bryanrai
10 ай бұрын
Waiting on one for Blackmagic Full Frame
@MarcoAurélioBorgesRibeirodeMir
9 ай бұрын
It would be great also for the Panasonic Lumix S5IIX!
@irvingmartinez98
11 ай бұрын
Please make one for A7S3 🙌🏼🙌🏼
@GCSUPPLY
11 ай бұрын
If it worked with the tilta cage id buy it
@shizwiz09
10 ай бұрын
I would buy one immediately if it had XLR audio or the design allowed us to still use the hot shoe
@alexxdominguez
10 ай бұрын
I’d buy it for the gold mount!
@frankfeng2701
11 ай бұрын
The only and major downside is the dummy battery solution, which has no redundancy and can overload the camera when powering multiple devices. I wish the power supply used a USB-C PD output.
@paperstacksfilms
11 ай бұрын
Do a version with an npf plate that would be clutch
@seethruhead7119
10 ай бұрын
also do a cineback video for sigma FP
@Ranger7Studios
11 ай бұрын
I wonder if this would work with the Sigma FP???? The cameras are of similar size.
@bassarcade424
4 ай бұрын
im not gonna lie that shit fireeeeeee
@snacc_pacc
11 ай бұрын
Is there a risk of creating a ground loop when powering the monitor and camera from the same battery?
@gemini1213
11 ай бұрын
wow amazing idea!!!
@larizazaldy
11 ай бұрын
could u please make one for the ZV-E1
@MiniatureActionJesus
5 ай бұрын
Now that the FX3 body and handle attachments are both available separate, any chance of a pack with both included as to save a little bit over both running around $600 individually?
@SteezyKane
11 ай бұрын
LET'S GOOO - been waiting for this. Thank you Caleb!
@bradleyc6564
11 ай бұрын
Please consider doing a version that supports the XLR top handle! I'd buy it in a minute! Edit: looks like they added an option for it! Yay!
@humphreybrondy
10 ай бұрын
Same!!
@lessthanjoe00
10 ай бұрын
Same, need my audio inputs
@dcamproductionsindia
10 ай бұрын
Yes please!!
@RayFrisby
10 ай бұрын
Absolutely, before production begins it would be a major selling point to be able to use the MI connection and top handle XLR unit. It may involve producing a bridging plate, or extra support point or a possible custom cage solution other than SmallRig, but it would be worth the extra effort. Apart from this I love the concept . 👍
@potatolord6204
9 ай бұрын
Did someone manage to find the link of a guy posted a link to a rig with the XLR handle. I think it's worthwhile checking it out
@JJphotographyNfilm
9 ай бұрын
i would like to buy a cineback but its sold out.
@rzk1856
3 ай бұрын
What is cineback it is a camera
@rizzo-films
27 күн бұрын
@@rzk1856did you... Watch the video?
@DSLRguide
11 ай бұрын
a lot to admire with this, like the product and the way you’re selling it. nicely done
@dslrvideoshooter
11 ай бұрын
Thanks boss! Hope you are well!
@elix_productions
11 ай бұрын
Hey Caleb!! Do you think you could design them for users that's using the XLR handle? I own a FX3 and FX30 with the XLR handle on both and I would love to build them out like this!
@VietinghoffAlex
11 ай бұрын
Ditto!
@joostwierenga
11 ай бұрын
this
@DjBobbyHustle
11 ай бұрын
same
@oscardelasol4725
10 ай бұрын
please do
@entengstravellog9320
9 ай бұрын
I'm actually interested too. Bummer that it hasn't. There's a guy posted here with a link and I checked it out. its actually one with the XLR handle.
@fulltimefilmmaker
10 ай бұрын
This is awesome man, well done.
@gabrielmachadobsb
11 ай бұрын
That's basically the form factor we've been asking Blackmagic for so long. They should hire Caleb to design their next platform
@memcrew1
11 ай бұрын
They don’t need Caleb for that.
@goldenhawk2839
11 ай бұрын
@@memcrew1 apparently they do. because black magics camera designs are garbage.
@eirikskarstein9964
11 ай бұрын
@@memcrew1obviously they do.
@BlackHoleCypher2023
11 ай бұрын
facts im literally about to sell my Black Magic now. lol
@sixofsix
11 ай бұрын
or a CineBack for the BM4k/6k?
@BlakeCastle
11 ай бұрын
Incredible work, thanks for the dedication! Would love a version for A7Siii too
@joaobelem1508
11 ай бұрын
This! Possibly a modded version of the top plate?
@JonathanWayneAndress
11 ай бұрын
@5:53
@tommymaurizi3199
11 ай бұрын
There’s one coming
@vknational4301
11 ай бұрын
Would love one for my a7IV too!
@PaulHarwood856
10 ай бұрын
There's one coming. He stated this in the video.@@vknational4301
@FilmedbyFresh
11 ай бұрын
can you also develop a product that uses the top handle port on the FX6, with XLR ports? We need the ability to get pro audio in without using the top handle please! I know a lot of people would buy it ASAP!
@aldolega
11 ай бұрын
Seems like a good first iteration, and really stoked to see stuff like this at all. Personally I think the many suggestions to accommodate the XLR handle and power via USB-C instead of dummy battery are spot on. I also think the rig is overly long- seems like it could easily be tightened up by a couple of inches, to have the back edge of the LCD flush with the back edge of the battery when tucked into the slot (at least with that slim battery you've got). I would also want to have the mount/dismount for the camera be much faster- ideally have the camera/cage slot into the system via the Arca Swiss plate on the bottom of the cage, and the Nato rail on top. So you just slide the camera in from the right side of the rig, and tighten a couple of clamps. The cold shoe on that SmallRig cage would block this but perhaps you could offer a modified version with it cut off, or maybe SmallRig would be interested in partnering with you on a new cage?
@rodrigoprata
11 ай бұрын
plus 1 for this comment
@JulienLaurentfr
11 ай бұрын
Would love to see a version of this where we could still use the FX3 top handle for sound 😅 I'd buy it instantly!
@NARRASSAFilmes
9 ай бұрын
Me too.
@vezvisuals4194
9 ай бұрын
Yes!
@rizzo-films
27 күн бұрын
If you can find the top handle adapter and cineback in stock at the same time, it's pricy. I'm still not sure why the adapter costs almost as much as the entire cineback.
@thomaswindfeld728
11 ай бұрын
Looks great. Would be awesome to have an alternative audio option to the audio top handle. Some adaptive cold shoe you could install somewhere else on the rig. Hope it makes sense😊
@bobbywiederhold
11 ай бұрын
Exactly..
@antone9751
11 ай бұрын
@@bemboing4338 fX3 and Fx30 have four channels of 24bit audio. It’s fantastic! Not sure why you would want to mess around dual system recording unless you had a dedicated sound recordist.
@antone9751
11 ай бұрын
@@bemboing4338 that’s why I asked for a solution to be used with the Audio top handle. It’s possible. Something like Shape make integrated into a top plate. I don’t need 32bit float. I often have two talent mic’d up and a shotgun or two going into the camera l. It’s great not having to worry about another bit of gear like a seperate recorder if I’m solo shooting.
@RobertJohnPhotography
11 ай бұрын
It would be great if you did this for the Panasonic S1H & the Panasonic S5IIX. The S5IIX are very popular.
@AlliandWill
11 ай бұрын
Really nice camera build man! Looks really pro, clients would love the 'look' of it lol
@AmandaM9
11 ай бұрын
I dont think you covered this in the video, but wouldnt using the same battery with your camera and monitor make the setup vulnerable to power ground loops? (grounding through HDMI, and killing the HDMI port). Its a very common problem on a lot of cameras, I dont know if the FX3 is different but I would assume it would be the same
@Sidewinders
10 ай бұрын
Always a possibility. I’m a 1st AC and have worked around this for years. The safest procedure, (which RED also has written out and I’ll transcribe here) for any camera, but lately especially the Komodo and others, is the following. Wherever SDI/BNC is mentioned, HDMI also applies: When attaching SDI accessories: Connect a power source to the SDI accessory; power on the SDI accessory. Ensure a power source is connected to the camera. This ensures both are grounded prior to connecting the BNC. The camera's power state does not have an impact on SDI attachment sequence. Connect the BNC cable to the accessory, then to the camera. When detaching an accessory mounted to an SDI output, ensure that you remove the BNC connection to the camera before removing power to the SDI device: Shutdown the SDI accessory. Disconnect the BNC cable from camera. Disconnect the power source from SDI accessory. When you need to swap out a battery on an accessory mounted to the camera’s SDI port, you must: Shutdown the SDI accessory. Disconnect the BNC cable from the camera. Replace the battery on the SDI accessory. Power on the SDI accessory. Connect the BNC cable to the camera.
@markyang6751
11 ай бұрын
would this work on the tilta cage?
@sixfoot6films
11 ай бұрын
Caleb this is great. PLEASE consider doing one for the S5ii (before your Canon run!!) 😃
@syrompicturez2917
11 ай бұрын
Great inventions Caleb... not seeing one for the Lumix S5 IIX do you plan on making that one? Perhaps you could design one that is universal or fitting for multiple models.
@SethParker
11 ай бұрын
Caleb! Is there an option for anyone who wants to still use the FX3 Top Handle for audio input?! Any ideas for secondary top plates and mounting?
@reeloutdoorjunkies3262
11 ай бұрын
I trust and appreciate your ability to mod and build. I am very interested in this mod. I do not however like dummy batteries due to the potential for data loss/corruption from battery exhaustion. Would the Kondor blue or similar D-Tap to USB-C PD cable be an option with Cineback? All in all I like this option. I am seriously considering this for my FX3. Thanks Caleb for all you do.
@hemantverma9899
10 ай бұрын
Vmount battery with a USB c to USB c option are the best and the safest for FX3,
@reeloutdoorjunkies3262
10 ай бұрын
@@hemantverma9899 agreed. had there been an option to go that route i would have pulled the trigger. Had one in y card straight out of batch 1 but changed my mind for that reason.
@mysondice
11 ай бұрын
LUMIX S5ii PLEASE PLEASE
@jamesoreilley2557
11 ай бұрын
Hi Caleb, Just worked with the Sony FX3 Firmware 4 to discover a major change has occurred since FW 3. If a dummy battery adapter is used the FX3 monitor will display an error message. As I understand Sony did this deliberately as the Sony batteries intelligently communicate to the camera and will reduce the risk of a corrupted file should the battery die during recording. We decided to power the camera via the USB input instead. I recommend you advise buyers of the potential power and/or clip corruption issue either by placing a warning label on the cage or in the instructions and/or the website.
@micahaka
11 ай бұрын
How can you power via usb while utilizing this rig?
@micahaka
11 ай бұрын
You wouldnt use the dummy battery correct? Just a normal battery? And then usb connects to what? It seems this rig only has d tap ports
@jamesoreilley2557
11 ай бұрын
@@micahaka Powering the FX3 requires inserting the Sony internal battery into the camera then using an external USB charger or PD power bank such as Tether Tools Onsite USB C battery pack (26,800 mAh, 100 W PD) . The PD power bank is constantly recharging the internal Sony battery. Another option might be the Kondor Blue D-tap to USB C power delivery cable. Disclaimer : With any external power source for the FX3 the user MUST VERIFY the power delivery voltage is correct for the camera minimum and maximum power requirements. One compliant I did read about the Kondor Blue D-tap cable is the D-tap was not the correct size.
@micahaka
11 ай бұрын
@@jamesoreilley2557 copy, thanks for your reply!
@InsecureWalrusHD
11 ай бұрын
Do one for the S5iix!
@KenjiStandlee
11 ай бұрын
If you update the design, will you consider adding some sort of protector or cover to the power switch? I could see that getting flipped on accident.
@dslrvideoshooter
11 ай бұрын
Could! But it is very recessed so it shouldn't get bumped.
@APU658
11 ай бұрын
Are you going to design one for the new black magic cinema camera 6K full frame?
@JpBoudreaux
11 ай бұрын
need one for the S5/S5II Please!
@ImScottJones
11 ай бұрын
I love the design. I wish you left room with the design to include the top handle.
@ImScottJones
11 ай бұрын
Also would like the d tap the other direction
@InventiveImagery
11 ай бұрын
Definitely buying the A7IV version when you come out with that as you mentioned in the video
@dslrvideoshooter
11 ай бұрын
That one is next!!!
@BenDavies1991
11 ай бұрын
Will it have a fan like the A7C version?@@dslrvideoshooter
@miguelarcega3282
11 ай бұрын
Nice man! For those of us that actually use the Sony Fx3 Audio Top Handle, can you figure out a way to reinforce it? I’m sure you’ve seen Shapes Fx3 handle support piece they made. Wish there was something like that but would work well with all cages. Right now I use the 8sinn fullcage. Work your magic man, a support for the audio handle would be 🔥🔥🔥
@antone9751
11 ай бұрын
Yes, a solution that could bridge the cineback and reinforce the Sony audio top handle similar to how the Shape solution works would be fantastic!
@petet66
11 ай бұрын
I use the 8Sinn full cage as well because it allows me to use the original handle when I need to.
@KhanStopMe
11 ай бұрын
Haven’t finished the video but this would be such a game changer for indie filmmakers
@MrDschaen
11 ай бұрын
Officially adding the Panny S5ii X to the wishlist - maybe add something to make use of the USB-C recording like Condor Blue is doing with the top handle. That would be a super clean setup! Great work Caleb ❤
@b.r.c.v
11 ай бұрын
Hi Caleb awesome work man 👍🏻 this is a fantastic way to rig the fx3/fx30 please make something similar for the Lumix S5iix please please 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻 greetings from Germany
@philippzakrzewski8180
11 ай бұрын
Hey Caleb, this looks really exciting. One tiny question on my end though - where would one add an audio adapter like the Sony XLR-K3M to this rig? I know, it's a "cine" rig, so one would assume sound gets recorded separately, but as I'm asked to film interviews quite a bit, having a capable audio setup (with XLR ports and good preamps) included in the rig is necessary. I love my XLR-K3M, so if there's a configuration that would take this into account, I'd love to know.
@luissinsin
9 ай бұрын
I agree with this comment. That top cheese plate needs to be custom milled to allow for the XLR-K3M. People can buy the cameras without the Sony Handle and then separately buy the XLR-K3M unit. Then, they can build out their camera with or without Audio XLR inputs.
@iddinshah83
11 ай бұрын
This is amazing! Great job! Please make a version for the Fujifilm XH2s!
@dslrvideoshooter
11 ай бұрын
On the list! That camera would look soooooo good in a CineBack!
@hessamzaki
11 ай бұрын
@@dslrvideoshootercan't wait for it 🔥
@fauland_photography
11 ай бұрын
Oh yes please. With a top handle record button please. I pre-order the very second you put it up online here!
Man, would be so cool if there was a way to keep the XLR handle on.
@shantanu.mp4
11 ай бұрын
yes! I love this, always taking matters into your own hands and delivering for the community.
@dslrvideoshooter
11 ай бұрын
Thanks so much! Really appreciate you guys supporting me so I can turn around and make stuff for us filmmakers/creators!
@umair4182
10 ай бұрын
Thanks for sharing this, it looks solid. However, one of the reasons why I decided to invest in FX3 was the ability to use the top handle. Looking forward to your next rig video which includes the top handle as well :)
@douglasbaiden
10 ай бұрын
Figure out one for the Blackmagic pocket 6k 4k and 6k pro we are waiting I have always wanted something like this for my 6k pro non on the market genius idea to make it happen
@MARZILLI
10 ай бұрын
You were made for this! In 2016 I went to you for info on rigging builds and still today I’m here watching because you are the king of the cinema build at affordable prices… Thank you. ❤
@rrrrr____
4 ай бұрын
I'm new to rigging out camera's and i could really use some help. I have the FX30, Sony ECM-B1M shotgun mic and the Sigma 18-50mm. I want to add a monitor and a battery and i have no clue how to do it. Any other recommended accesoires for my setup are also welcome. If its possible i would like to keeo it budget friendly
@ThomasWilliamson
11 ай бұрын
Love it but really wish there was a way to use the FX3 top handle. Now that I have XLR input I don't want to go back!
@GlobalShutterNY
11 ай бұрын
Need a version for the Tilta cage! (And I would use USB-C PD instead of the dummy battery power...but that should be easy)
@chungdha
11 ай бұрын
Issue with this design it doesn't really account any space for a wireless transmitter to be included and mounted nicely in that package. Especially when running such a rig and working with a crew that needs to watch wireless monitors.
@CinematicCaptures
11 ай бұрын
This is fantastic man! Would love to see CineBack rig for the GH6 some day in the future! Keep up the great work!
@Laiqul
11 ай бұрын
Hi caleb, on 7:28 , you turn on all connected device from power source, is that safe ? I use 3 camera setup, all using dunmy batery, But still affraid to turn on or off directly by cutting power from the source, what i do is switch the camera on off manually Is there any refference that i could read or watch, that not switch camera on off manually is okay ?
@buildhuntxplore
10 ай бұрын
AWESOME!! Sadly I missed out on the launch and they are all sold out. Definitely keeping a close watch so I can grab one. Keep up the great work!!
@anilyolsal
11 ай бұрын
Incredible product! Looks great and I would like to try it! But I have the Tilta FX30 Cage V1, Is the CineBack compatible with that?
@DJ-hu4ih
11 ай бұрын
A lot of Blackmagic users would love you if you created this for the pocket line of cameras (and the new ff model)
@wildsfilms
11 ай бұрын
love this! it would be smart to make one for the Lumix S5 MK II being that it's the most affordable full frame video first hybrid camera.
@harrisonbyerley1416
11 ай бұрын
What about the XLR handle? How would we run audio on this setup?
@JonasStuart
11 ай бұрын
This is awesome Caleb! I'd love to see what you can do with the new BMD Micro Studio Camera G2 4K to set it up as a compact cine cam °¬)
@filmalltay
11 ай бұрын
Super cool idea, but mega bummer that it covers the FX3 handle attachment point. That XLR input is crucial for doing solo run and gun work with the camera
@prostoparen
11 ай бұрын
Cool looking product but what the point? Also uou blocked xlr handle. There is small rig vmount baseplate that makes the same with less money and more flexebility
@samuelboatengyt
11 ай бұрын
This is crazy cool, could you create one for the LUMIX S5IIX? 😍😍 I willing to pay extra for this
Пікірлер: 1,1 М.