(Cue a pre-fight hype announcement) The unddddddddddddddddddddisputed HEAVY WEIGHT KING!!!!!!!!!!!
@NoFate247
Жыл бұрын
It's like these guys want me to get a divorce. I mean I'll probably get kicked out of my house but at least I'll have plenty of benches to sleep on
@gauravaws20
Ай бұрын
😂😂
@carlospacheco6915
Жыл бұрын
Why does the seat pad have to be adjusted to no gap when storing upright?
@StevenSeiller
Жыл бұрын
🤔I wondered the same thing. My guess would be that it somehow makes it less likely to tip over.
@lsmjake
Жыл бұрын
After looking at him lift it up and see the seat wobble ever so slightly, I think it is for 2 reasons. I think it adds more stability when standing for sure to have the gap closed. However, more importantly I think if it was all the way extended and you raised the seat quickly, I bet with the ratcheting seat mechanism it might flip/fall forward (up) when the bench hits the ground when upright.
@TheCarterHomeGym
Жыл бұрын
Impressive! You guys are making it tough for me to decide on which bench I want 🤔
@flexmarksthespot
Жыл бұрын
The ratcheting adjustment of the seat is pretty cool 😮
@REPfitness
Жыл бұрын
Easier and faster to adjust.
@StevenSeiller
Жыл бұрын
✨Elegant!
@chrisa8203
Жыл бұрын
Are you guys ever going to produce the Leg Extension/ Leg Curl attachment? People have been waiting for 3 yrs for this. 😑
@REPfitness
Жыл бұрын
Active prototype... working to perfect it.
@PlantPoweredPedals
7 ай бұрын
@@REPfitness Any updates? Just got my Blackwing and really really want this attachment to become a reality.
@steveoake2901
2 ай бұрын
@@REPfitness Soon? You guys seem to develop entire product lines in less time than this addon. I am ready to pull the trigger on the Blackwing, but I will have to buy the Bolt Leg extension to use on this if the Rep version is not ready. I would prefer to keep it all in the same family.
@REPfitness
2 ай бұрын
@@steveoake2901 Our goal is to release it later this year. To have it dialed in perfectly and be both cable attached and plate loaded has proven difficult with the right resistance curve. We design all of our equipment in-house and have high standards for anything we release. Many other brands have released stuff that just doesn't feel right - has dead spots of resistance in part of the motion, etc. We know this because we've tested every other unit out there. Innovation takes time, but we are moving as fast as possible.
@clutch66613
Жыл бұрын
Make it available in clear coat and take my $$
@liebermanji45
Жыл бұрын
Rep just responded on my recent comment that they will be offering this in clear coat sometime this year - I’m totally waiting for that! Maybe rep can make a waiting list for that hint hint ;)
@alexanderlytwyn
Жыл бұрын
So....leg extension/leg curl attachment??? When's that on the way?
@SteveK6578
Жыл бұрын
When the video ended and the Rep logo appeared my first thought was ‘ah man they didn’t do a corny end to this video’ but just moments later y’all came in with gold.
@REPfitness
Жыл бұрын
Gotta keep the easter eggs at the end for those who watch the whole video ;)
@BradleyADavis
Жыл бұрын
In addition to the leg roller, would be great to see a leg roller to go overtop of legs to use for lat pulldowns
@nolancollins4926
Жыл бұрын
Fantastic idea.
@REPfitness
Жыл бұрын
Great idea... we may have something in the works exactly like what you're suggesting ;) And a leg curl/extension.
@Magnus-pm7ic
Жыл бұрын
@@REPfitnessyou guys said the same with the original zero gap bench...
@mikeworkman1759
Жыл бұрын
@@Magnus-pm7ic it'll most likely fit both benches as their current attachment is universal between both benches and it should attach the same way
@DBOL-HIRAETH
Жыл бұрын
@@REPfitness don’t say that 😂 I’m literally trying to figure out what leg curl/extension machine to get since you guys don’t have one. I wanted my new home gym to be all Rep lol. Any hints on if it’s possibly coming this year?
@Ketamean_papi
Жыл бұрын
I was thinking about waiting for some reviews to come out before picking this up to upgrade from my AB3000 but there’s no way this isn’t an incredible bench so I just decided to pull the trigger and pre order 😂 Now just hoping y’all get an order of matte black ones in sooner than expected so I can put it to use ASAP🤞🏼
@seaneppel7465
Жыл бұрын
While this bench looks sweet, I just grabbed the AB-5000 when it went on sale last week. But, I love the idea of flipping the leg extension to do Nordics, I just tried this on my bench and it works great!
@frankus8359
Жыл бұрын
Leg extension?
@user-ft2md2gd4s
Жыл бұрын
best bench ever. very adjustable and no gap 💪
@deathmetalfunzone7727
Жыл бұрын
Just when I thought your benches couldn't get any better, you go and do something like this.
@ToneysReviews
Жыл бұрын
I love the AB-5k ZG. However, Rep you've got to do something about the leg roller pads. It is by far the worst design. Please, make pads that are foam covered in leather or some type of leatherish material. The foam pads are way too hard.
@Blahmanwhysoserious
Жыл бұрын
Damn, not available for 2 months
@TheSasquatchNation
Жыл бұрын
Just got my 5200….and now you do this to me.
@MacStrengthCo
Жыл бұрын
That angle adjustment on the front pad without pulley the pin is a game changer. Nice job on this bench, I think you pretty much fixed all the grips and added a ton more features over the out going model.
@michaelraya-p4k
Ай бұрын
I just got my Blackwing! It's everything and more that it's made out to be. It's so heavy duty it's overkill. It's real work unboxing and assembling this bench, but it's worth the trouble. The extra features set it above the competition. You can hand this bad boy down to your great grandchildren. Real quality.
@DavyDave1313
Ай бұрын
Where’s the leg extension/curl attachment? Is it coming out soon bc I’d like to buy your guys but if it’s better to buy a third party one I’ll go with that
@mattmarsicano5762
Жыл бұрын
Awwwww cmon REP! I just bought the zero gap and another bench from you guys! I can't fit a third bench unless I kick my wife out hahaha
@emily_the_studd
10 ай бұрын
How many angles would be options for doing Nordic curl regressions?
@ClimbToWealth
Жыл бұрын
Most of the things I hated about the AB5000 have been corrected with the Blackwing. Namely the handle, pop pin adjustments, protection for storage. I can’t wait to use this bench
@DingusSquatfordJr.
11 ай бұрын
This 5-minute video took 151 minutes to film, from 11:43 am to 2:04 pm.
@Check.m.e
Жыл бұрын
I currently use two benches for Incline, Flat and Decline. This really is a modular bench that does it all. The time and detail put into this bench really is top tier
@samrmills
Жыл бұрын
Is the pad compatible with any of your other benches? I’m not sure if I want to get wide or standard and would like the option to get the other if I think I might need it later
@StevenSeiller
Жыл бұрын
🪪 One this this video didn’t cover: the NAME. Why BlackWing? And why now depart from cryptic letter-number combinations? 🤔
@murdog04
Жыл бұрын
I just place a pre-order for this bench. I was prompted to add the optional leg roller at checkout but in the description for the roller it did not say it fit the new Black-wing so I did not add it to my cart. Can you confirm the leg roller will fit the new bench? Super excited to receive this product this summer. Can’t wait :). Thank you for the support. V/R Shane
@REPfitness
Жыл бұрын
Thanks Shane! It is - we link to it on this our BlackWing page - we highly recommend it since it adds a lot of versatility - repfitness.com/collections/adjustable-weight-benches/products/blackwing-adjustable-bench
@reachon7396
Жыл бұрын
This might be my favorite bench can’t say for sure cause i don’t have it yet lol
@Acconda
5 сағат бұрын
does the seat cushion wobble like the previous one ?
@REPfitness
Сағат бұрын
Nope
@plaguedDrummer55
25 күн бұрын
I got the standard width pad, and the seat pad is WAY too wide for incline bench. I feel like I have to do a split just to get my legs around it, and it’s digging into the insides of my legs. I can’t even use leg drive properly, and it’s just ridiculously uncomfortable. I am very disappointed because everything else is solid, especially the stability. Maybe they sell a narrow pad I could try instead. I’m surprised more people haven’t run into this same problem. I had 3 different people (all average sized men) try the bench and had the same problem. For any incline position, a seat pad that is as wide as the standard bench back pad will not be optimal at all since it has to come up between your legs. The optimal incline bench would be a wide back pad combined with a narrow seat pad (somewhere between 8 and 9 inches wide).
@REPfitness
25 күн бұрын
Hey Drummer - Sounds strange. We have the BlackWing being used by dozens of our staff on a daily basis, and in thousands of homes/gyms. Could you drop a line with some measurements of your seat pad - repfitness.com/pages/contact-us Maybe something is off. Thanks!
@liebermanji45
Жыл бұрын
Hey rep-I LOVE my raw clear coat FB-5000 AND my matching 1st-gen zero gap….is there ANY way this BlackWing is going to be offered in that finish as well? If not, kindly consider; if so, TAKE MY MONEY
@REPfitness
Жыл бұрын
Howdy! It's in the works and will be released this year. No exact date yet, but stay tuned!
@liebermanji45
Жыл бұрын
@@REPfitness THANK YOU Rep you never let us down! I will “patiently” wait for it :)
@liebermanji45
Жыл бұрын
@@REPfitness Would you consider starting a wait list for a clear coat BlackWing? It appears several people on this thread alone including myself would be interested. Thank you either way.
@REPfitness
Жыл бұрын
@@liebermanji45 We'll get a pre-order going as soon as we have eyes on a date. Don't worry, we'll get a decent size batch the first go to ensure we have enough to cover nearly everyone.
@liebermanji45
Жыл бұрын
@@REPfitnessYou guys are AWESOME! This bench in raw clearcoat will be centerpiece of my gym. I have the matching FB-5000 in raw clearcoat as well as the AB5000 same color (which this will replace)-they are all freaking stunning, like literal steel works of art. They are even so nice to touch and handle. If you haven’t yet, trust me it’s worth the extra $30 color upgrade fee). I will check your site every night and hopefully stalk it into existence by year-end lol. I really appreciate the thought and design that went into original and now this new 2.0 zero-gap. Truly thinking out of the box. Thanks Rep! Ps-product by product, you have converted me.
@rayjbb1494
Жыл бұрын
Great to see the innovation from Rep including updating benches and Ares/Athena for PR4000 and 5000! Any idea when UK shipping is coming?
@REPfitness
Жыл бұрын
We are finalizing a big order to a UK distributor now! Throw your email in here and be the first to know! repfitness.com/pages/international-distribution
How does this bench fit for incline press with a PR5000 with a lat/low row attachment? I find that the lat/low row attachment makes it difficult to get the bench into a workable position, and I'm wondering if the foot position on this bench works better in any way.
@lsmjake
Жыл бұрын
I just do the incline press outside the rack (i have a 30" depth rack with a rear lower stabilizer). To transition to incline presses you have to move J-cups and safeties anyway, so just move them to outside supports instead
@DKQuinoa
Жыл бұрын
Take my money
@junioralvarado629
Жыл бұрын
I’m glad I waited
@TonyChanTurbo
9 ай бұрын
@REPfitness Why is it important to close the seat gap before standing the bench up?
@REPfitness
9 ай бұрын
To keep the seat more set as it goes vertical.
@enrikoalfaro6724
Жыл бұрын
Does the fat pad for the zero gap bench fit on this?
@REPfitness
Жыл бұрын
Good question - drop us a line - repfitness.com/pages/contact-us
@murdog04
Жыл бұрын
I pre-ordered this bench the beginning of March. I just got shipping notification from REP. It is supposed to arrive next Thursday. #Stoked
@Legion-404
11 ай бұрын
the bench is great, will you be making over attachments for the bench beside the leg roller? a dip attachment would be great.
@ShawntreezyBreezy
Жыл бұрын
It's a bird it's a plane it's a mother*uggin dope bench . Next - Voice activated adjustments 😜 I just dropped a gem
@DamonMoves
Ай бұрын
You guys are the best, hands-down. Love the attention to detail, I wish you guys were located in Hawaii! But kind of glad that you’re not because I might not be able to pay for rent. Lol
@REPfitness
Ай бұрын
We do have an authorized distributor in Hawaii- check em out! repfitness.com/pages/authorized-distributors
@DamonMoves
Ай бұрын
@@REPfitness Ahh yes I forgot!
@enriquel1993
Жыл бұрын
I'm literally getting the AB-3000 2.0 FID delivered tomorrow and you guys decide to release this 😭
@WondererFree
7 ай бұрын
Is this the matte color or glossy black?
@REPfitness
7 ай бұрын
Matte finish
@victormonta-8267
Жыл бұрын
Donde puedo conseguir los bancos en Latinoamérica
@r8der674
Жыл бұрын
Will there be an Ab-5000 2.0? Or is this supposed to replace it?
@johnholmes5040
Жыл бұрын
Would it be possible to do a sissy squat with the leg roller in the same position as the demonstrated nordic curl? Maybe if you put a few weight plates on the other end as a counterweight?
@crx1234
Жыл бұрын
come to Indonesia maket PLEASE!
@easybeart
Жыл бұрын
Amazing bench. Just pre-ordered!
@ironsportfitness2414
Жыл бұрын
So is this their top model over the ab5200 2.0 version?
@SmokinBuddha
Жыл бұрын
Is the leg roller attachment the same as the AB-5000?
@ChrisP3000x
Жыл бұрын
I don't think I've tried a wide pad for benching. Does it get in the way of the arms' range of motion?
@23Khameo
Жыл бұрын
I think it depends on how wide your shoulders are, I’m a smaller guy and for me it’s almost like a barbell floor press.
@ChrisP3000x
Жыл бұрын
@@23Khameo Oh okay. I'll have to do some measurements.
@lsmjake
Жыл бұрын
thing is... you use an adjustable bench for more than benching. I have the Rep flat bench with wide pad for bench press, but I don't want a wide one on my adjustable due to it limiting arm ROM during chest supported rows, etc
@ChrisP3000x
Жыл бұрын
@@lsmjake So in your case, you claim that the wide pad doesn't get in the way of your bench press, and you prefer a wide pad for bench pressing.
@lsmjake
Жыл бұрын
@@ChrisP3000x likely does depend on how wide your shoulders are. I do typically use the wide pad for flat benching, as it supports under my shoulders a little more. That said, as long as the pad is 12", I think I could do without if needed. I don't seem to have a problem using my 12" adjustable pad for incline barbell/DB bench pressing. So if looking to save some coin or if short on space, go with an adjustable bench with a 12" pad and you should be ok. But flat benches are relatively cheap, so I went that route and got the wide pad on that.
@richardjennings4685
Жыл бұрын
Coop is most likely drooling over this thing.
@FrankJackson
Жыл бұрын
Hell yeah…freaking finally!!!!!!!!
@dubcee4694
Жыл бұрын
Awesome bench y’all 😅
@krisroadruck5081
Жыл бұрын
Getting ready to buy my first adjustable bench - money isn't really an issue so mostly just focused on getting the best all-round bench. Am I giving anything up by getting this over the AB-5200 2.0? Are there any trade-offs besides price?
@REPfitness
Жыл бұрын
The BlackWing is a pretty amazing bench. If this is your first adjustable bench, you'll be very impressed.
@gabemartin3761
Жыл бұрын
Just got mine today!
@meisdetermined
Жыл бұрын
Man I LOVE the new products coming out, I really do…but question: wouldn’t it be easier to get onto the bench to do the elevated sit-ups if there was a handle up there by the foot rollers? Ironmaster has one as well as Titan FID bench. Is that something that is possibly coming down the pike in the future. Absolute beautiful product, just trying to consider different angles. Thank y’all for everything you do and provide for the gym community. :)
@REPfitness
Жыл бұрын
That's a great suggestion! We will definitely consider it for a v2.
@jerseyjim9092
Жыл бұрын
Torn between the new 5000 and new 5200. The 131 lb weight of the 5000 is a big negative for the wife even with the new lift handle. I'll have to see some reviews but I'm leaning toward the much lighter 5200. Shame some aluminum couldn't be used in non critical areas to bring the weight of the 5000 down.
@REPfitness
Жыл бұрын
The BlackWing's handle placement definitely makes it easier to pick up than our AB-5000. However, the 5000 series benches in general are meant to be overbuilt and heavy duty. I would consider the AB-4100 if you're looking for a solid flat/incline bench that is easy to move around.
@Jesus-po2uu
Ай бұрын
🥶 Llevo pensando en comprarlo, desde hace mas de 1 Año. 👀 Esperando a que muestren el weight leg curl attachment y quizas con el preacher pad update, pero no lo han hecho ! 🤨 Y eso me tiene muy decepcionado.😵 Update please 🥺
@REPfitness
Ай бұрын
Lo siento! We have both in prototype phase. Our goal is to release them later this year.
@Jesus-po2uu
Ай бұрын
@@REPfitness 😁 Hey ! Thanks for the reply. I appreciate it. 🤗 Prototype phase for this specific B.Wing bench or a newer B.Wing 2.0 version, or any other name, but compatible with this B.wing. So I could buy either version, but with the benefits of the leg curl attachment & preacher pad. Also, Could you be more specific as for when it's really coming out? I mean, I know it takes time, but it's been a very long time already. Can you give us a better insight or your own opinion of this prototype phase status? Thanks in Advance.
@REPfitness
Ай бұрын
@@Jesus-po2uu We dont have an estimated ETA for the release just yet- best way to stay up to date is through our newsletter!
@turkishdelight6032
Жыл бұрын
What grade of stainless steel are you guys using? That makes a big difference
@lsmjake
Жыл бұрын
better than the plastic handle used on the new Rogue Manta Ray
@nolancollins4926
Жыл бұрын
The bench I've been waiting for.
@REPfitness
Жыл бұрын
Built just for you :)
@nolancollins4926
Жыл бұрын
@@REPfitness One very minor complaint, wish it had a bare steel option for the color.
@liebermanji45
Жыл бұрын
@@nolancollins4926 agree! It needs to match my other rep benches!
@todd3351
Жыл бұрын
How is the paint protected on the ladder system?
@REPfitness
Жыл бұрын
There is no metal/metal paint contact. It has protection between the metal components.
@danielhewitt8
Жыл бұрын
@gymandfitness you guys need to bring this into Aus
@REPfitness
Жыл бұрын
Drop them an email and let them know to stock it! The more you ask, the more likely they will stock it.
@paperea5776
Жыл бұрын
What about leg extension attachment?
@REPfitness
Жыл бұрын
Prototype phase, will be released later this year.
@StealthKillerXIII
Жыл бұрын
Sigh... *takes out wallet* Ps. Do you guys have a Smith Machine planned for the PR-5000? 👀
@avinashtyagi2
Жыл бұрын
They have an "empty your wallet" machine 😋😉
@lsmjake
Жыл бұрын
Bells of Steel is teasing a smith machine rack attachment... not sure when release date is yet though
@jhayd11
Жыл бұрын
Was this video shot with a 12" and 14" pad?
@REPfitness
Жыл бұрын
Our standard 12"
@samrmills
Жыл бұрын
Niiiiiice! What is shown here…standard or wide?
@samrmills
Жыл бұрын
nvm...must be standard bench since he said meets all IPA requirements
@faithfitnessandfatherhood
Жыл бұрын
This has to be the absolute best bench on the market.
@REPfitness
Жыл бұрын
Thanks Chad, that's pretty awesome of you to say.
@faithfitnessandfatherhood
Жыл бұрын
@@REPfitness I have an FB-5000 as well as an AB-5200 (v1) that I modified to accept the leg roller attachment. The fact that you guys have combined ALL items that people look for into one bench…including the zero gap. CRAZY!
@lsmjake
Жыл бұрын
@@faithfitnessandfatherhood I have the AB-5200 also and I'm curious how you modified yours to accept the leg roller attachment... care to show/explain?
@danielhewitt8
Жыл бұрын
You've ALMOST got me rep. Add a Leg Ext/Curl and Preacher attachment and you've got me!!
@avinashtyagi2
Жыл бұрын
@reconstructionwouldhavesav9472 Bulletproof has a good one, if you're fine with tinkering
@danielhewitt8
Жыл бұрын
@@avinashtyagi2 Unfortunately Bulletproof doesn't have an Australian distributor. Rep does.
@iamfuckingyourwaifuandther2743
Жыл бұрын
Is there going to be any other attachments, and a back plate option for nordic hamstring curls?
@MrThleckey
Жыл бұрын
Have to wait till Coop does a review but this bench looks great.
@studio500
Жыл бұрын
REP, you guys are our favorite wingman forever! 🤣
@REPfitness
Жыл бұрын
Haha, did you see the end of the video? :)
@studio500
Жыл бұрын
@@REPfitness Of course! That’s always the best part of your video!!! 🤣💪
@REPfitness
Жыл бұрын
@@studio500 we love leaving a little nugget in there after the credits hah
@murdog04
Жыл бұрын
Love this product! Would love to test it out.
@REPfitness
Жыл бұрын
Our new benches will be at the Arnold Sports Festival this weekend, Home Gym Con in a cpl months, and our showrooms in Pennsylvania and California will both have it on display to test in late May / early June when units are available.
@markhalstead2386
Жыл бұрын
Just ordered in blue! Just sold my Rogue adjustable bench and will use my FB-5000 in the interim.
@Sommitps
Жыл бұрын
At this point I think you should focus on the EU expansion, rather than making a new bench every week. It looks great though for sure.
Пікірлер: 152