Hey Will not sure why but there is no option to choose Path for my camera animation... I have every option like DOF, Twist, Zoom, Dolly, but do not have a Path option. Any idea why this might be? Using Keyshot 2023 pro. 2:33
@WillGibbons
Жыл бұрын
YES! I understand. I just checked. Apparently, Luxion just replaced path animation with keyframe animation. It works the same way pretty much, however, I just tried it and ran into a ton of bugs/crashes. I've reported it to the team and hope they can address them soon. Sorry for the confusion. This just changed in the latest release a month or so ago.
@CGI_3D
3 жыл бұрын
If there were a Will Gibbons Academy, I'd be a student for life!
@Rizashi
8 ай бұрын
Oh maaaaaan i am so happy i finally find a tutorial creator with the right amount of momentum and respect to the viewer! You keep a consistent, focused and informative narrative - with just the right amount of side tracks of explaining how to do specific settings or QoLs in the program or results. You realise that your audience is intelligent and need no hand holding, you push for quality results and explain reasons and consequences crystal clear. You're a rare gem my man, keep it up! This is how to spread inspiration.
@WillGibbons
8 ай бұрын
Wow! Thanks for the ultra-kind comment. I really appreciate it!
@triciasada5383
2 жыл бұрын
this is wonderful will, you are always churning out the best content for industrial designers. Cheers
@WillGibbons
2 жыл бұрын
Thanks for your comment! Means a lot to me.
@bilokshankar
3 жыл бұрын
Man, I am glad you are on youtube. This was a much-awaited tutorial. Thanks a tonne
@WillGibbons
3 жыл бұрын
Glad to hear it! If you think anyone you know would benefit, it would be awesome if you felt like sharing it! Thanks :)
@fe1ixastankov543
8 ай бұрын
this whole focus on the box technique really helps,i was struggling on the same thing and couldnt find the solution,huge thanks!!!!!!
@shoppster300
3 жыл бұрын
I've been animating fly arounds for large commercial staircase models for the last few years in Keyshot and building the camera paths has been frustrating to say the least. I have tried using the camera path animation previously and had issues with centralising my camera target, and unnatural looking camera motion. I've always ended up using a combination of the single function camera animation tools along with some fancy custom motion easing. Very time consuming, and still a little unnatural looking. It does get me up and around 5 to 18 levels of staircase, but I dread doing them as it tedious and unrewarding visually. These two tips are an absolute revelation to me. I will be checking out your paid tutorials, I need the speed of Keyshot to make what I do commercially viable, so learning the tips and tricks to get around the software's inherent limits is very valuable. Thank you!
@WillGibbons
3 жыл бұрын
I can imagine that animating a camera through an architectural space would be quite the challenge in KeyShot. I'm about to begin creating my KeyShot Animation Masterclass, so hopefully that'll be available before the end of this year!
@shoppster300
3 жыл бұрын
@@WillGibbons It sounds exactly like what I need. A decade of experience and frustration distilled into a masterclass. I'll keep my eye out for when it drops.
@RaymondFrake
3 жыл бұрын
This is the tutorial I've been waiting for. Thanks, Will!
@WillGibbons
3 жыл бұрын
Awesome, thanks for letting me know!
@azdnozzle
3 жыл бұрын
Finally! Have been waiting for the path animation tutorial long time, Thank you keyshot god.
@chriscardinal4171
2 жыл бұрын
Keyshot owes you money for this tutorial. Super useful, thanks for sharing!
@WillGibbons
2 жыл бұрын
Haha, it'd be interesting if it worked like that, huh? Cheers! Glad you enjoyed it.
@mehulpandey2208
3 жыл бұрын
I can't explain how much this has helped me I was searching for this and I saw your video notification and that to on path animation in keyshot, God bless you
@TillRaguin
2 жыл бұрын
Hi Will, thanks to your tutorials I will have some animations to show for my graduation presentation. Huge thanks for making all these videos, they help a lot of us.
@WillGibbons
2 жыл бұрын
That's what I want to hear, Till! Cheers,
@artistrasmusolesen
3 жыл бұрын
Been waiting for a detailed tutorial for this, thank you!
@leonfragile
3 жыл бұрын
Best keyshot tutorial on KZitem
@charliechief1363
2 жыл бұрын
Omfg you have no idea how much I love you rn haha thanks for the taking the time to make this tutorial way easier than blender!
@WillGibbons
2 жыл бұрын
No problem!!
@stonetic2515
2 жыл бұрын
This was so clear and helpful, thanks. I learned a lot of Keyshot tricks I would have never figured out on my own.
@WillGibbons
2 жыл бұрын
Thanks! I'm glad to hear that.
@qubafootbag
3 жыл бұрын
I spent YEARS trying to make it working properly, unfortunately this video only confirmed myself all the issues I had were just drawbacks of the software. I love the Keyshot with all my heart but any camera movement I always import from blender, its much easier, more flexible, controling the camera path in any real 3D soft compared to weak keyshot tools is like night and day...
@WillGibbons
3 жыл бұрын
I can understand this. KeyShot wasn't initially developed as a robust animation tool. Gotta work with what it's got!
@csar9097
Жыл бұрын
At last! A professional camera animation tutorial. Thanks Mr. Gibbons
@WillGibbons
Жыл бұрын
You’re welcome!
@extraterrestrial546
2 жыл бұрын
What a legend this guy is. Awesome.
@WillGibbons
2 жыл бұрын
Thanks so much!
@rahulkumar-tr9gq
10 ай бұрын
Thankyou Guruji
@asif.a15
2 жыл бұрын
I've been waiting for this real bad,Thanks for the tutorial
@hahaharimau
Жыл бұрын
Thank you for making this video. The cube is a nice trick! I'm going to try to use camera path next time :)
@WillGibbons
Жыл бұрын
Glad it was helpful!
@RubmaLione
2 жыл бұрын
Thank you so much! This was really helpful
@WillGibbons
2 жыл бұрын
You're welcome! :D
@3dakademikadircay563
3 ай бұрын
Teşekkür ederim Beyefendi.
@WillGibbons
3 ай бұрын
You are welcome!
@michaelkoltuniak4773
2 жыл бұрын
Hello Will, and thank you for all of your great tutorials! What is the format for the "Master class"? all video? some powerpoint?
@WillGibbons
2 жыл бұрын
If you visit the link you can watch some for free. The first video (course overview and contents) will cover all that. It's 99.9% video.
@Zakof76
Жыл бұрын
Truly great tutorial, thank you!
@daviddipasquale586
3 жыл бұрын
You should definitely be hired by keyshot or teach them how to do tutorials...
@WillGibbons
3 жыл бұрын
Where do you think I got started 😂
@CGI_3D
3 жыл бұрын
LMAO
@pathumthilina3938
Жыл бұрын
Great tutorial! Thank you!
@Mlenski_restorations
Жыл бұрын
Perfect tutorial. Thank you very much for it.
@WillGibbons
Жыл бұрын
You're very welcome!
@tommyyu6448
2 жыл бұрын
Is it better to do camera movement in Keyshot or Blender?
@WillGibbons
2 жыл бұрын
That's a matter of opinion I suppose. It's not a question of what is 'better', but what do you value and which program can provide a better experience to you.
@lelouchjolly1404
Жыл бұрын
Very useful tutorial, thank you so much!
@WillGibbons
Жыл бұрын
Glad you enjoyed it!
@joelsjodin
3 жыл бұрын
I have been waiting for this🙌
@racketeer451
2 жыл бұрын
Thank You so much
@WillGibbons
2 жыл бұрын
You're most welcome
@imadkaab7731
2 жыл бұрын
Really very good lesson and teacher I apearciate your job Thanks a lot
@WillGibbons
2 жыл бұрын
Thank you! 😃
@sahnie82
3 жыл бұрын
Thanks for the tutorial!
@WillGibbons
3 жыл бұрын
You bet!
@VINYLVIBES27
Жыл бұрын
I am very very thankful for your help❤️
@WillGibbons
Жыл бұрын
Always welcome
@jom1439
3 жыл бұрын
nice tutorial ;) always appreciate the little keyshot hacks like the one with the cube :D just a question: why aren't you just disabling the visibility of the cube in the project panel (eye-symbol) ?
@WillGibbons
3 жыл бұрын
If you give it a try, you’ll see that it disables the animation (like turning off the transform in the animation timeline)
@jom1439
3 жыл бұрын
@@WillGibbons oh good to know. I have used that trick only with static objects as a center for rotation of others. (off-center hinges etc.)
@lim0408
Жыл бұрын
I cannot find a way to roll the camera when apply path animation, it seems all axes are locked after applied path animation.
@WillGibbons
Жыл бұрын
That's correct... as far as I know.
@pablodecosta7116
2 жыл бұрын
Good video Will. Very useful, thank you
@kzee11
2 жыл бұрын
great tutorial !
@christophschmolz1283
7 ай бұрын
Hi Will, thank you for the fantastic tutorial! Do you know a way to edit a control point in Keyshot 10 or 11 by entering absolute values instead of dragging and rotating it with the mouse?
@WillGibbons
7 ай бұрын
No, I don't believe that's an option, sorry.
@jameschang7274
2 жыл бұрын
very cool
@felipetesta
Жыл бұрын
Great video! Thanks!
@WillGibbons
Жыл бұрын
You bet!
@seriousCADninja
Жыл бұрын
Awesome!
@WillGibbons
Жыл бұрын
Thank you! Cheers!
@dushyantvyas4087
2 ай бұрын
how to set the initial position of Camera -> Path -> Position? As it does Fit To Zoom like starting point which is unable to delete that point. For example, I want to start position with Zoom out (object should be far away) and Zoom In progressively. I am unable to do that with Camera animation using Path because it FORCES the first position which Keyshot decided, rather than user.
@WillGibbons
2 ай бұрын
You should be able to edit your camera path animation in the geometry view. Right click on the first control point and choose 'edit' and use the handles to drag it to a new position. Or, create a new camera and place it in the starting position you'd like. Then create a new camera path animation using this camera.
@mdsegara101
3 жыл бұрын
How about make it 5 seconds animation where 4 second to finish the camera path and another second to animate the object position to the left for example..?
@WillGibbons
3 жыл бұрын
Sure. Once you have animated both the cube and the camera you can do whatever you like. This was just my example.
@dietmarreiss9248
3 жыл бұрын
The Keyshotoscar goes to..........Will. Without you I would have no idea what ingenious features Keyshot has. Especially when it comes to animation, there's not that much from Inneo. Many thanks for your tips.
@WillGibbons
3 жыл бұрын
Stoked to hear it, hah.
@kapwinng
Жыл бұрын
Thanks, how would I keep the camera focused on the object whilst using the depth of field option?
@WillGibbons
Жыл бұрын
There should be a button you can press to set the focal point. If you're asking about an auto-focus function, that doesn't exist unfortunately.
@tallahqureshi1140
3 жыл бұрын
Awesome brother.
@aeonjoey3d
3 жыл бұрын
THIS IS AMAZING!!!!!!!!
@begin-gd1jm
2 жыл бұрын
wow you share professional tip very thanks
@WillGibbons
2 жыл бұрын
You are welcome
@cosmos3852
Жыл бұрын
How to focus the camera on a moving part?
@WillGibbons
Жыл бұрын
You could probably create a path animation, but not create any movement in the camera. Then use the trick where you set the camera's target to the animated object. Give it a shot! I haven't tested this, but I think it'll work.
@muhaY-vb5vp
3 жыл бұрын
so that cube basically just "empty" like in Blender, nice trick!
@WillGibbons
3 жыл бұрын
Pretty much!
@fukofakic
3 жыл бұрын
Well that was helpful. Thanks a lot man!
@WillGibbons
3 жыл бұрын
Cheers, thanks a lot!
@Mark-yb2kj
9 ай бұрын
Hello Will, I see that the "path" animation was substituted by another one which is called "keyframe", is there any chance that you can explain this one as well since I cannot recognize the steps which you took in this tutorial?
@WillGibbons
9 ай бұрын
Sorry about that. It's my intention to do so. I just haven't had time. Will try to do that soon. I recommend watching the tutorial by Luxion on the topic until mine's out.
@Mark-yb2kj
9 ай бұрын
Thank you Will, I checked it and I'm also looking forward to yours. Thank you in general also for your nice work, you can explain complex mechanisms very understandable although I'm already working a lot with Keyshot.@@WillGibbons
@kylethatch9790
2 жыл бұрын
Very nice!
@KateDoeStory
2 жыл бұрын
Thank you so much!!
@WillGibbons
2 жыл бұрын
You're welcome!
@michaelkoltuniak4773
2 жыл бұрын
How do you operate the geometry view "froze" while the real-time view doesn't zoom in?
@WillGibbons
2 жыл бұрын
Sorry, not sure what you mean. Maybe you have a locked camera in the real-time view?
@oscardesignstudios
2 жыл бұрын
Very cool, I would like to know if it can be used to make an animation of more than one subject at the same time, passing to one to another like if someone is walking between them and looking at one first and then to the second one.
@WillGibbons
2 жыл бұрын
Unfortunately I don’t think so. This would require being able to animate a target change which isn’t possible. You could fake it by animating the location of the target though. Wherever the target goes, the camera points.
@fahadbutt3601
2 жыл бұрын
Awesome video❤️
@WillGibbons
2 жыл бұрын
Thank you 🤗
@lapijamebre
5 ай бұрын
Where did the path camera go in Keyshot 2023, It seems to have disapeared or maybe changed to a less obvious name?
@WillGibbons
5 ай бұрын
IT's indeed gone. They replaced it with keyframe animation. Sorry I've not made a tutorial on that topic yet.
@levendesigns8032
3 жыл бұрын
Great i need this
@lord_byron_pg7204
Жыл бұрын
Hi @Will Gibbons is there the possibility of get your course on Offer?, I'm not a guy of high resources
@WillGibbons
Жыл бұрын
Hi, you can earn it for free if you join the Luxion Luminaries community and earn coins and exchange them for my courses. Or if you're on my email list, you'll hear about any sales I run occasionally.
@matheusrocha8420
Жыл бұрын
Vlwww, muito bom o tutorial!!! ja me inscrevi no seu canal
@thomasmarinari8573
2 жыл бұрын
what is the name of the song that is played from minute 5:48 to 6:23 when u present the keyshot master class ?
@WillGibbons
2 жыл бұрын
Hmm, I'm not sure off of the top of my head. It probably came from the KZitem music library or audioblocks which are two places I get music from.
@Adillovlogs1
27 күн бұрын
Path and animation option not showing in camera section..... Sir how to enable this feature?
@WillGibbons
26 күн бұрын
This tutorial is now out of date if you're on a newer version of KeyShot. I'm sorry. It's been replaced with keyframe animations.
@Adillovlogs1
25 күн бұрын
@@WillGibbons I'm using keyshot 7
@Adillovlogs1
25 күн бұрын
@@WillGibbons I'm using keyshot 7 . Sir plz give a small guid how to use
@WillGibbons
25 күн бұрын
@@Adillovlogs1 Ah, I see. KeyShot 7 is very quite old. I think this feature did not exist back when KeyShot 7 was out Unfortunately. Your option seems to be to upgrade to the latest version of KeyShot or a later version that has the path animation tool.
@Adillovlogs1
25 күн бұрын
Ok sir I'll update my keyshot version @@WillGibbons
@Keri_96
Жыл бұрын
Thanks Will! I'm using Keyshot 2023, when you right click on the camera there isn't a camera path alternative, do you know how to make it visible? (Btw, I'm still on the trail period)
@WillGibbons
Жыл бұрын
Sorry. I'm not sure what you mean by 'camera path alternative'. I used Camera Path for the animation in this tutorial. Can you maybe rephrase your question?
@Keri_96
Жыл бұрын
@@WillGibbons ”Camera Plath” can’t be found when right clicking…?
@wafflebutt7
Жыл бұрын
I am having the same issue. When you right click on the camera at 2:33 there is no option to choose "Path"@@WillGibbons
@markthirtysix7707
3 жыл бұрын
molto bravo!
@user-yl5nh6oz8k
2 жыл бұрын
谢谢分享 , 很有用💖
@azerabdurrahimov9987
Жыл бұрын
Hi, l'm working in matrix my jevelery models,but l need animation for them, can help me,
@WillGibbons
Жыл бұрын
Sorry, I'm not sure what this means
@azerabdurrahimov9987
Жыл бұрын
@@WillGibbons I want to learn how to give shining effect to the gem when making a presentation video of the jewelry. Can you please help me? I am even ready to pay you for this. Looking forward to hearing from you..
@WillGibbons
Жыл бұрын
@@azerabdurrahimov9987 This would not be something done in KeyShot. In NLE software like DaVinci Resolve, this is called Aperture Diffraction. I'm sure After Effects has its own version of this. But in short, this is a lens aberration and not a property of diamonds or shiny metals.
@gauravgandhi1925
3 жыл бұрын
god of keyshot...
@sagutxo82
Жыл бұрын
Nice tutorial, thanks. But I have a problem that’s driving me nuts. I have lets say camera 1. This camera has as objetive one cube that latter it’s hide. I put all the points of the path. I say objetive and I chose the cube. When the animation starts (first frame) there is a small jump from the camera at the beginning (camera 1). After that it’s smooth, but it’s annoying and I can’t fix it. Any thoughts?
@WillGibbons
Жыл бұрын
Yes. This is because you need to move the timeline to the beginning of the animation. Adjust the camera to the position you wish, then save camera. The reason for the jump is because the camera is snapping back to its last saved position.
@sagutxo82
Жыл бұрын
@@WillGibbons ok, I’ll try it. Thanks!!
@anuraggoyal4113
3 жыл бұрын
Please suggest me a laptop or pc under 1500$ for keyshot
@WillGibbons
3 жыл бұрын
Hi, please read this article. It should help you come to a conclusion: willgibbons.com/blog/computer
@hafezshoja3724
2 жыл бұрын
you are so nice dude ! It was very useful for me I really appreciate you something else I try to realistic render of jewelry I can't drop spotlight on materials like gem or gold ! and nowhere i cant fiend my solution can you please help me?
@WillGibbons
2 жыл бұрын
Spotlight won’t reflect on specular materials. Try area light instead!
@Rogier7305
2 жыл бұрын
Hi Will, am trying this now and it works great. I have a question though, when i right click on a path animation (in the timeline) i dont see 'duplicate' or 'mirror'. When i right click on a 'turntable animation' i do see those 2 options. I want to also reverse my path animation so it goes back to where it started from. Do you know the reason these 2 options are not visible with path animations? And how can i do this reverse path ?
@WillGibbons
2 жыл бұрын
Hey there, you don't see the option because, as far as I know it's never been a possibility. I understand this might not solve your issue, but depending on the scenario, you could render out the sequence and play it back at -100% in a video editing software.
@Rogier7305
2 жыл бұрын
@@WillGibbons Hi, thanks for your reply. Found an option that works, but still doesnt do what i wanted. If you set up a path with 3 'points' (1-2-3) then you can copy the first 2 and paste them after the last one, so that you get 1-2-3-2-1. This way the camera moves back over the same path. Only downside is that i want it to stop for like 3 secs at point 3. Maybe something like 1-2-3-3-3-3-3-3-2-1 would do that, havent tried it yet.
@Renzsu
Жыл бұрын
I can honestly say I hate animating in Keyshot. Your tutorial helped, but man is it a pain in the backside. I'm currently working on a simple exploded view, and I already spent more time on fixing the damn camera path than it would've taken me to set everything up in Blender.
@WillGibbons
Жыл бұрын
Ugh, that's no fun! Sorry to hear that. Yeah, it's not as refined as I'd like it to be.
@Renzsu
Жыл бұрын
@@WillGibbons I'm sure they'll get there eventually, although they'll need a UI overhaul first before implementing some more advanced animation features.
@hashidmohammed7169
3 жыл бұрын
In my animation the model is moving not camera but why
@WillGibbons
3 жыл бұрын
What do you mean in 'your animation'? Did you use the KSP I provided, or did you create your own animation in KeyShot. Did you animate the model, or the camera?
@studentsufian
3 жыл бұрын
Why I can't find cad files on your website of some previous tutorial? Can you update the links please!!
@WillGibbons
3 жыл бұрын
Have you signed in? The file vault files require you to sign up on my website for free.
@studentsufian
3 жыл бұрын
@@WillGibbons Yes, Signed Up, some Cad files are Missing. Either website was not working or CAD files was Missing
@studentsufian
3 жыл бұрын
I am busy right now, I will tell you later what were the links that were not working before. I will update you soon
@WillGibbons
3 жыл бұрын
Okay, thanks. Sorry, would love to know which ones so I can fix it
@hashidmohammed7169
3 жыл бұрын
Can you please make a cinematic car animation
@WillGibbons
3 жыл бұрын
Cars aren't really my thing. Not sure if that'll ever happen on this channel. But never say never...
@ExacoMvm
3 жыл бұрын
Imo it would be a lot easier and much better to do the camera animation inside Blender ( since KS ppl are budget focused ) and import it into KeyShot. In Blender or any other 3D Package you could do animation like this ( if not better ) in under 2-3 mins following something like these steps: /watch?v=a7qyW1G350g
@WillGibbons
3 жыл бұрын
What do you mean 'KeyShot people are budget focused'? I think you've got that backwards. This is a tutorial on how to use KeyShot, not Blender...
@ExacoMvm
3 жыл бұрын
@@WillGibbons Well most ppl use 3ds Max, C4D or whatever for Viz/product ad work together with 3rd party renderers which usually cost quite a lot, so I would not say it's backwards. And yes I get this is KeyShot tutorial/channel but my point/suggestion was to maybe sometimes include more efficient or "improved" workflows. Just by watching what it takes to do basic cam animation in KS I would never do it inside KS, I think KS is just "middleware" ( like ZBrush or Marmoset Toolbag ) so for best results and speed another package could be used together with KS but that of course could be too complicated for less advanced viewers.
@tgs1766
3 жыл бұрын
Blender's sole claim to fame is that it's free. And it's easy to see why. The interface is a nightmare. Even after the recent overhaul it's still terrible. It feels like software cobbled together from many disconnected sources and that's because it is. But it's main problem is that it tries to be a jack of all trades but it's a master of none of them. There's never a shortage of guys like you who cheerlead it "you could to this better in Blender" (so tiresome, by the way) but there's a reason that after all the years it's been around, you'll still find very few people and even less studios using it professionally.
@tgs1766
3 жыл бұрын
@@ExacoMvm "Most people use...." LOL Stating your opinions as facts doesn't make them facts.
@ExacoMvm
3 жыл бұрын
@@tgs1766 Well, blender is actually being used more and more by studios as it gets better, yeah it's pretty much master of none except probably modeling, blender is one of the best when it comes to modeling or blocking out concepts, even some Industry people started using blender together with some game studios, not so much in film I guess. In terms of KeyShot only very few artists that I know use excluding the "lower level" artists. Let's say if you use Maya, Max or Blender or something else there's literally no reason to also buy KS, because why use KS if you already have lets say V-Ray or Redshift for example which is not only faster but also has way more features and shading capability.
@Shifty4L
2 жыл бұрын
8:00 is because the devs are sleeping. it SHOULD do something, highlight blue, green, put an outline, flash the screen, give me a warning, do something! you can't expect users to be looking for tutorials and fixes for this. we shouldn't make up excuses for their faults.
@WillGibbons
2 жыл бұрын
Not making excuses. Just trying to offer some tips to make it easier to use this feature.
@stanleywtang
Жыл бұрын
Coming from a 20+ years experience in 3d animation, the fact that you can't adjust the timing of the keys of the camera path is ridiculous
@WillGibbons
Жыл бұрын
I can't disagree with you there. Honestly, it makes sense. KeyShot was created as an image-first application and since then it's matured while the animation engine hasn't been fully re-written. Thus, its keyframe implementation was an addition and isn't integrated as completely as it could be.
Пікірлер: 168