For anyone having issues with the second step bottom piston not extending. Remove the redstone by that piston (Check the video at 3:14, it's the redstone to the far right). Place a solid block there, and add redstone to the top.
@Trixi33333
10 ай бұрын
Did what you said, didnt work.
@jan.6130
10 ай бұрын
Fixed it for me. Thanks!
@rightlygeneric
10 ай бұрын
ACTUAL HERO.
@alexboeve9002
10 ай бұрын
THANK YOU!!!
@emaplacinskaite3077
8 ай бұрын
THANKS YOU WISE MAN!
@TheGahooatribe
7 ай бұрын
I am having trouble the middle sticky piston is stuck and the one under wont pull it down
@Splaurr
29 күн бұрын
the repeater on top of the observer has to be at 1 or 2 ticks
the second step piston is firing but it just won't pull the block back down, how do I fix this?
@TheSheepReaper
11 ай бұрын
I have the same problem did you fix it?
@ulysselambert9244
10 ай бұрын
okay guys i don't if you have solve your problem yet, I solved the problem by adding a block in place of the redstone connected to the bottom piston, and then connected that block to the redstone trail leading to the lever.
@Splaurr
29 күн бұрын
the repeater on top of the observer has to be at 1 or 2 ticks
@aceisaperson
2 ай бұрын
I am so confused, I cannot get my observer to go the way his did. Like it physically won’t go that direction
@HandlesIThoughtOfWereAllTaken
11 ай бұрын
What about the buttons?
@thesplawn
2 ай бұрын
You gotta watch an entirely different video in order to figure out how apparently
@caleebsterthe3rd719
26 күн бұрын
Hello! My middle piston after trying to bring the floor back up stays down and i have to hit the lever twice to cycle it back to it working again any idea whats going on?
@davidescrb
7 ай бұрын
Not a single chance the observer is facing the right way, they change it or something
@TomcoTwo
7 ай бұрын
They haven’t changed the way you place observers? Could you not just copy what I did?
@keedenbuhler5058
7 ай бұрын
No it doesn't work all bs
@LuisCampos-gn9kb
11 ай бұрын
This is cool but how do you activate it from the top?
@MGA_EnvixityツShorts
9 ай бұрын
Idk I've been wondering about that
@Aeirvx
3 ай бұрын
The staircase works on java, but i cant hook up t flip flop to it? am i stuck having to use a lever or is there a method that works with buttons
@RandomCat82
5 ай бұрын
wait i just saw this design in a mumbo video, even had the same jokes
@Ryeman20
2 ай бұрын
1 question how do you make it as a button activation?
@redstonepuff9686_yt
Жыл бұрын
Bruh i am made it even bigger How is this so smal?😳
@nanditasen4002
Ай бұрын
@TomcoTwo you are a easy maker
@sonic_exe4633
Жыл бұрын
Bro deserves way more subscribers
@GGOATKU
Ай бұрын
anyone having trouble on java 1.21.1 with the pistons?
@GGOATKU
Ай бұрын
shit I just read the title does this not work on Java?
@TomcoTwo
Ай бұрын
this only works on bedrock sorry
@scp-049-2
Жыл бұрын
i could not locate the middle iron block
@strather7919
6 ай бұрын
How is the bedrock you can't place redstone on slabs?
@arielbros4654
3 ай бұрын
when you place down a slab and put Redstone on it, it doesn’t work because only the bottom slab will not work, it’s like placing a block but splitting in half and the Redstone can’t be placed. So the way you can do is place a block and place a slab on the right side top of the block, then destroy the block and place Redstone on the top of the slab.
@miles_0234
Ай бұрын
I can’t make it work 🙈
@ImStimless123
Жыл бұрын
This did not work for me idk why I tried everything but still would not work
@bikshgamerz7410
Жыл бұрын
Why no likes fiys smash it so he will male more
@mtownpyro7198
10 ай бұрын
you are moving the camera too fast
@jaxonmccann6142
4 ай бұрын
i cant place the observer right
@Soy_VR
3 ай бұрын
same
@tomsbrewing1
Жыл бұрын
Well done!
@TomcoTwo
Жыл бұрын
Thanks :)
@LordFanta
6 ай бұрын
@@TomcoTwothe double piston is not pulling the block back down
@daniyonanshamany7469
Жыл бұрын
Does this work in Java?
@hariishraoparanthaman
10 ай бұрын
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
@ionutseiche5720
2 ай бұрын
Cangur
@123soybi
4 ай бұрын
why has no stais why??????
@TomcoTwo
4 ай бұрын
I made a version with stairs on my other channel, this is a much simpler version tho
@Inkblot67
3 ай бұрын
IT HAS STAIRS
@JenBrown-xs6sc
4 ай бұрын
You cut the video
@TomcoTwo
4 ай бұрын
?
@jeremysoto9224
3 ай бұрын
THIS ISNT WORKINGGGGGGG UGH
@TomcoTwo
3 ай бұрын
What’s happening?
@GoreGaming1110
5 ай бұрын
youve waisted my time bozo did everything you did in the video and didnt worked well.
@TomcoTwo
5 ай бұрын
It definitely works, you just built it wrong.
@ronin2205
3 ай бұрын
Doesnt work sadly. Only 1 block will go where intended and ive copied it to a T
@TomcoTwo
3 ай бұрын
It definitely works, are you on bedrock?
@ronin2205
3 ай бұрын
@@TomcoTwo yep
@TomcoTwo
3 ай бұрын
If you have discord can I see some pics of the redstone
@ronin2205
3 ай бұрын
@@TomcoTwolooks like the bottom piston doesn't extend The 2nd repeater isn't powering on
@TomcoTwo
3 ай бұрын
Is it facing the right way?
@RobFerone
Ай бұрын
Hey dunbass next time make a video that works
@TomcoTwo
Ай бұрын
This works. You built it wrong but that’s not hard to believe since you spelt dumbass wrong 💀
@RobFerone
Ай бұрын
@@TomcoTwo thats why there's people in the comments talking about how to fix it right dumbass?
@RobFerone
Ай бұрын
@@TomcoTwo where did my comments go pussy?
@TomcoTwo
Ай бұрын
The people in the comments talking about how to fix it built it wrong
@justacomedian
Ай бұрын
@@TomcoTwo That guy's a "dunbass". Anyway, do you know if this still works with the new Redstone update?
@MGSports1727
3 ай бұрын
Why doesn’t my top sticky piston on the double not stick to the other sticky piston? 1:36. Can I get some help?
@Styx_2nd
Ай бұрын
Same thing happening to me aswell
@Splaurr
29 күн бұрын
the repeater on top of the observer has to be at 1 or 2 ticks
@michaellind9650
28 күн бұрын
I'm trying that repeater on all settings and it's still not firing on top, leaving my middle block lower by 1 block
@SeanMcCormick-eo5to
Жыл бұрын
How do you close it from the top?
@swaynemaster101
9 ай бұрын
Button maybe?
@dylanhomme7935
7 ай бұрын
From where he put the lever, make a staircase leading to your desired top, make the red stone dust trail leading to the top, put your lever down and it should work, to close it from the bottom also, just put another lever near the redstone dust trail at the bottom, it'll intercept it
@@fe4rlessisback32whats that could you be a little bit more specific?
@bigt6173
Жыл бұрын
Bro I just discovered your channel a few days ago and I have almost 20 of your builds in my base. This guy doesn’t miss
@TomcoTwo
Жыл бұрын
Lol Ty
@hariishraoparanthaman
10 ай бұрын
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
@hariishraoparanthaman
10 ай бұрын
This design surprisingly works in java 1.20.2 just you need to make sure the redstone dust at 2:07 goes into the piston with a target block beside it (or repeater or any redstone item which transmit signal directly to the piston) super tiny build and very impressive
@KexLaker
9 ай бұрын
yes i try it and it not go in the piston how do i fix pls help
@gallaxial8361
8 ай бұрын
@@KexLaker I did it in Java 1.20.3 and it works very well if you replace the first redstone at 2:03 with a target block.
@Pr0wzy
7 ай бұрын
nice fix cheers
@Jacks-Son983
5 ай бұрын
Anybody try in 1.20.4?
@Tukyo
Ай бұрын
@@gallaxial8361 still works 1.21 java replacing redstone going into piston with target block
@aleckazamproductions8139
8 ай бұрын
1. Instead of placing the lever where he placed. Instead, trail redstone up a staircase you make leading back to the room. Using a button will be difficult, so just hide the lever in the room from the trail of redstone. 2. You wont be able to close it behind you. And you will be stuck if someone closes it behind you. Fix this by leading another trail of redstone from the original trail like a T, and lead it downstairs to where your hidden room is. Add a lever there.
@obbivnp8088
4 ай бұрын
Omg thank you so much this helped me so much on my build
@reoqq3842
Ай бұрын
When I make the red stone trail longer the lever has no effect. How can I fix?
@7_monke
29 күн бұрын
@@reoqq3842red stone repeater
@Ultimatfalcon
18 күн бұрын
@@reoqq3842use redstone repeaters in between the redstone trail
@jamesm3830
Жыл бұрын
Im having a problem with the 2 sticky pistons with the sticky piston facing up, the one facing up wont extend, only way i managed to get it to move was put a red stone torch under it but obviously it wont operate by the lever then
@diredonkey9994
Жыл бұрын
Same here
@catherinegeorge1215
Жыл бұрын
I tried it 4 times… the top step doesn’t push up. I’m so frustrated.
@diredonkey9994
Жыл бұрын
I worked it out, wire a second redstone string that leads directly into the piston that’s problematic. It should also connect to the lever so it all turns on at the same time
@Lil_Phag
Жыл бұрын
Same, my top piston keeps pushing the stair up again...
@chini2563
10 ай бұрын
I’ve just figured it out you need to add another redstone trail connected to the bottom piston to the lever and add a redstone repeater 1 redstone dust before the bottom piston max tick
@peter-v1j1g
2 ай бұрын
im on bedrock 1.21 and the third piston isnt bringing the block down
@raven8195
Ай бұрын
same have u found a solution yet 😢
@gypsytears5880
23 күн бұрын
bedrock is for absolute losers
@TomcoTwo
23 күн бұрын
Or people that don’t have access to expensive computers
@MGA_EnvixityツShorts
9 ай бұрын
For anyone wondering how to close it from the outside all u have to do is bring the redstone out 3 blocks from where u put your lever then bring it up to where you want the lever on the outside
@KarissaTaylor-bk8lo
9 ай бұрын
I'm confused what do you mean
@gvidas9434
7 ай бұрын
You are a life saver man!! Tysm
@Xander34d
5 ай бұрын
Hey im not sure im following
@FlamingLinwood
11 ай бұрын
First of all. Love your designs. But I was wondering if you could do a 5 wide hidden staircase bedrock tutorial 😅
@da1trugamr
Жыл бұрын
I cant find any good tutorials on making a flush (Or as close to flush as possible) 3 x 3 piston staircase, the only one i did find dousnt work anymore, could you make a tutorial on that next?
@TomcoTwo
Жыл бұрын
I’ve made one on my main channel that still works @TomcoMC
@caleblong4552
8 ай бұрын
I need some help. My middle step with the two sticky pistons is not working. The bottom one extends but the top one doesn't come all the way back down.
@sampither4433
7 ай бұрын
is your first repeater on 3 ticks?
@LordFanta
6 ай бұрын
@@sampither4433yes I have the same issue
@LordFanta
6 ай бұрын
@calebblong4552 try to change the repeater on the very bottom so when it’s the standard time try pressing it once that can fix it
@LordFanta
6 ай бұрын
Nvm
@Splaurr
29 күн бұрын
the repeater on top of the observer has to be at 1 or 2 ticks
@lore345_official
25 күн бұрын
works in java too!
@DietDrPp
Жыл бұрын
yo how do you get it to work with buttons? i like the idea of it being able to open and close behind me but with this I only open and close it from the outside? how did you manage it?
@TomcoTwo
Жыл бұрын
This video may help, kzitem.info/news/bejne/q56JvZqErZWcnag It should work the same even though this isn’t a door 👍
@DietDrPp
Жыл бұрын
@@TomcoTwo Worked Great! Thanks!
@indyjones99
8 ай бұрын
SUPER IMPORTANT THING: for those wantinf to use stair instead of blocks, you can do it for the first two (closest ti the switch) but not bottom "seeable blocks that are revealed vis the pistons taking the 3rd top block, pretty sure stairs are considered slabs so the redstone pitches a fit. Also remember to add the repeater as seen in 3:33 to help with properly timed cycling.
@elizabethblake2988
27 күн бұрын
Decent tutorial works like once or twice then my sticky piston doesn't want to stick to the other one what am I doing wrong 😭
@Gardza_Gabriel
2 ай бұрын
how to do the button thing from up above? if anyone knows pls tell me
@TikiQuests
4 күн бұрын
welp this is the worst tutorial i have ever seen didnt work one bit waste of my time thanks.
@TomcoTwo
4 күн бұрын
you built it wrong or are on the wrong game then sorry
@JustMeMissaD
11 күн бұрын
It did not work. I don't understand this. *searching for a different tutorial*
@TomcoTwo
10 күн бұрын
Ok
@PaduVn.3423
4 ай бұрын
Why did you add the button and then give me instructions?
@TomcoTwo
4 ай бұрын
Wdym
@PaduVn.3423
4 ай бұрын
?@@TomcoTwo
@TomcoTwo
4 ай бұрын
I don’t get what you mean
@PaduVn.3423
4 ай бұрын
@@TomcoTwo What do you mean by block?
@TomcoTwo
4 ай бұрын
Like a cube? I’m confused i can’t lie
@adiryanbobe9654
Ай бұрын
I have a problem that it doesn’t work in bedrock even though thats what it said
@TomcoTwo
Ай бұрын
It definitely works in bedrock, so if it’s not working for you you’ve either built it wrong or on an incompatible server
@Ewok_518
2 ай бұрын
Yeah I just spend 60 mins trying to figure it out imma check out some of the other tutorials
@retrovoid2110
Жыл бұрын
How do you close it when youre up?
@Envexity207
Жыл бұрын
@@PeaShooter-qi7sihe just moved the lever
@ryanlozano-ng6if
4 ай бұрын
Just led some sed stone up through the ground to where you want the lever to be at
@Ewok_518
2 ай бұрын
Nice video just organize it better people building it into their base and not in the open are having a hard time
@danielgomez9202
Жыл бұрын
Why can I not place the first observer down? I’ve been trying for about an hour now😭
@danielgomez9202
Жыл бұрын
Also, the observer point to the side blocks and will never go the angle that I need it to
@SaltyPupusa
Жыл бұрын
same, ended up pissed off cause i couldnt get it
@andrewh.l.7351
Жыл бұрын
The sticky piston won’t grab the other piston what do I do?
@TomcoTwo
Жыл бұрын
I’m a bit confused what you mean, are you in bedrock?
@ryanlefurgey7488
Жыл бұрын
Having the same problem. The second stair, which would be the double sticky piston facing up is in issue for me. The bottom piston will not extend with the rest of the pistons as it does in your video
@Pxxrcheontt
2 ай бұрын
@@TomcoTwodoes it work In bedrock
@TomcoTwo
2 ай бұрын
Yes
@Pxxrcheontt
2 ай бұрын
@@TomcoTwo then why isn’t it working for me😣
@N_SINGS
22 күн бұрын
A BIRD COULD EXPLAIN THIS BETTER THAN YOU FIRST YOU GO TO FAST YOU BARELY EXPLAIN WHAT DO YOU JUST EARNED A DISLIKE
@TomcoTwo
22 күн бұрын
Please find that bird, you’d win awards. But also you don’t have to watch me, I’m still learning and if you don’t like what I do feel free to watch someone else
@N_SINGS
21 күн бұрын
@@TomcoTwo sorry man I had a bad day
@appleseedgames6934
6 ай бұрын
I just realised why it was working on my bedrock creative world and not on the java server, because this only works on the superior version
@GrassLion85
5 ай бұрын
You can also connect it to a line of redstone coming out of a chiseled bookshelf Edit: thanks for the tutorial, works great, and I'm bad at redstone!
@sekaiidesu
3 ай бұрын
can i have some help? whenever i activate it with my lever, the two sticky pistons that are stacked, the lower one just stays still and doesn’t push the second one higher. im not too good with redstone and im totally lost.
@Glorlox
8 ай бұрын
this works on java too :D
@Pxxrcheontt
2 ай бұрын
I need help the top of the second piston doesn’t attract back down it stays up please someone help me 😓🫠
@milobridgewater8498
2 ай бұрын
Could someone please explain to me how I get a lever/ button for the top of the design?
@skyripper2004
3 ай бұрын
when i do this, the second stair wont go down fully any help please? like it is two block on the top level and the third 2 blocks below
@PaduVn.3423
4 ай бұрын
I love you, I succeeded
@mayanose7875
7 күн бұрын
Does it work for Java?
@TomcoTwo
7 күн бұрын
no sorry
@Yelan194
2 ай бұрын
The observer just don’t places like I want it to
@murraymon
Ай бұрын
so the ground i'm using is kinda staggered, and i want it to look like it hasn't been touched, how would i modify this to make the middle block go one higher when closed?
@TomcoTwo
Ай бұрын
You can’t really do that with this design sorry
@UnexpectedDanger
5 ай бұрын
Why didn't you show us how to build the whole thing? You show off buttons for opening and closing, but you don't explain how to set them up? Very annoying.
@TomcoTwo
5 ай бұрын
Because not everyone wants buttons, I used to just how to attach buttons but looking at the analytics less then 5% of ppl stuck around to watch it, so instead I made a separate video showing ppl how to add buttons to Anyhting, if you want it you can find it on my channel. I believe it’s called ‘How to add buttons to any door’
@michaeloglesby921
2 ай бұрын
sorry have to give you the thumbs down for this tutorial as it is incomplete and doesn't show how to add the buttons like in the into. please can you rectify this or pass on a link to someone who has done it correct with the buttons on both ends, or if anyone else can help and place a link to a video that would be much appreciated.
@TomcoTwo
2 ай бұрын
I never said I was showing you how to add buttons, besides buttons aren’t custom, you can attach any button to any door as long as you do it correctly, the same with a lever or pressure plates. I have a video called ‘how to add buttons to any door’ but saying the tutorial is incomplete I don’t believe is correct
@Coolest_Dog
8 ай бұрын
sticky piston grabbing a sticky piston dose not pull the block the second sticky piston has.
@courtneyhelgesen9196
4 ай бұрын
awesome build! worked well for me when just doing one, but after mirroring it and trying to add the buttons it started having synching issues? goes back and forth with the 3 sticky pistons not closing together, tried adjusting the repeaters which fixed that problem but then causes the top of the 2 pistons on the second step to not fully extend. Any advice for how to fix that?
@TomcoTwo
4 ай бұрын
Did it work when you mirrored it and just used a lever?
@charlene4388
6 ай бұрын
the bottom piston for the second step isn't pulling down the top piston :(
@xarchives-COD
3 күн бұрын
Why would you not show how to make the entrance bruh
@TomcoTwo
3 күн бұрын
Wdym, that’s what’s the entire tutorial is about?
@xarchives-COD
3 күн бұрын
@@TomcoTwo after building it there is no switch to enter, only an exit switch
@xarchives-COD
3 күн бұрын
@@TomcoTwo really frustrating when in survival mode
@TomcoTwo
3 күн бұрын
@@xarchives-COD oh you want buttons, Theres a video linked in the description thats designed to help you with that 👍
@LordFanta
6 ай бұрын
The double piston will not pull the block back down I need some help
@ykCleverx1
7 күн бұрын
Mumbo tomco
@deetak2810
5 ай бұрын
As an average minecraft play this is not simple 😂
@PartyAlliance
6 ай бұрын
I am so incredibly bad at this its actually surprising
@Dragonsanddogs
Ай бұрын
Ok but how do i open and close it from the top?
@TomcoTwo
Ай бұрын
There’s a video linked in the description that’ll help you connect buttons to it, then you can move the buttons wherever 👍
@Dragonsanddogs
Ай бұрын
@@TomcoTwo Thanks again.
@TomcoTwo
Ай бұрын
Np
@mikmaqmadness
7 ай бұрын
but where do we place the buttons like in the beginning of the video?
@43dirkus
3 ай бұрын
doesnt work for 1.21
@TomcoTwo
3 ай бұрын
It does as long as you’re on bedrock
@thefuriousrobert6704
2 ай бұрын
I’ve had so many issues with this in vanilla you’re wrong. It doesn’t work in vanilla.
@TomcoTwo
2 ай бұрын
This video was made in vanilla, as long as you’re on bedrock it works
@fionaf9606
6 ай бұрын
any way i can open and close it with a button instead of a lever?
@valentin-wll
8 ай бұрын
Is it possible to add rails on the stairs without breaking them??
@Rahulbpc
3 ай бұрын
Working perfectly on bedrock... thank you.
@duckslazers9044
7 ай бұрын
How do i make it so the lever isnt udnerground
@CoughFe29823
6 ай бұрын
I like it but how do I extend it to like 4 more stairs?
@GrayStillPlays--Technoblade
4 ай бұрын
Could u use a stair, and then use a block swapper to remove it ehen we want to make it look coller?
@TomcoTwo
4 ай бұрын
I do have a version of that on my main channel, but I will probably end up making a new tutorial on it for over here
@Em0ti0naljpg
10 ай бұрын
why is it also the two pistons directly on top of each other the ones that never work -_-
@fionaf9606
6 ай бұрын
try putting a block next to it and putting the redstone dust on top of that
@sadly3mop996
Жыл бұрын
Oh I just know I’m going to have to watch this another 20 times before I can even try to build this 😅🥲
@funterenter8001
Жыл бұрын
Wowwww this is the cool, faster and easy to build
@PaleSeydoux
6 ай бұрын
redstone is not locking on to the piston lol
@ZentaFavs
2 ай бұрын
its not letting me talk even thoguh im subscribed;(
@TomcoTwo
2 ай бұрын
Wdym?
@caitlinbower7848
9 ай бұрын
im building this in a cherry blossom biom
@gabecx
2 ай бұрын
WOW this is the best redstone build i’ve ever made! you have a new sub!
@TomcoTwo
2 ай бұрын
thanks!
@RatMoses-ti5ho
Ай бұрын
I used this tutorial to make a hidden staircase in java, thanks man.
@TomcoTwo
Ай бұрын
Np
@landonster2655
4 ай бұрын
so how do you make it like it is in the intro? i dont understand redstone someone help please
Пікірлер: 341