Coarse coating used in this project
NX83 Chipping Black (Ichinen Chemicals)
This paint is originally designed to prevent chipping scratches on underbody parts such as side steps and undercarriage.
The original rough, uneven texture was tested on bumpers.
Unlike general color paints, chipping paint can be applied to the underbody without any scratches or slight hemming.
Scratches on the underbody and some dents are not so noticeable.
In case of scratches, lightly scrape off the wisps on the surface.
No putty filling is required.
Two coats were used up in three coats on the front bumper of a light truck.
The primer used this time
Dye-Q Mitchacron Multi 420ml
If you apply the primer to plastic parts as it is, it will peel off easily.
However, when Mitchacron is applied as a primer, the top coat will not peel off.
However, when Mitchacron is applied as a primer, the topcoat will bite well.
Apply one or two thin coats.
If the top coat is solvent-based, allow it to dry for 20 to 30 minutes before applying the top coat.
Allow the top coat to dry for 20 to 30 minutes before applying the second coat.
Pudding soap used this time
Miyoshi Soap Soyokaze 2.16kg (soap powder for washing)
100 ml of soap powder and 90% hot water at about 60°C 0ml
Add and mix well, and let it sit overnight to complete the process.
It strongly decomposes grease and mud stains, but does not have a strong smell.
It has no strong odor and does not cause roughness of hands.
Tapping brush used in this project
Cleaning brush 36-577 (made by Tool Sales Straight)
Негізгі бет Автокөліктер мен көлік құралдары The special rough paint job made the car look wild. mini truck
Пікірлер: 110