Anyone else here going down the rabbit hole in order to diy a house?
@Jalapenoskyraisin
5 ай бұрын
Here!!!
@davidflavin
5 ай бұрын
🙋
@kelvartis
5 ай бұрын
I am personally going to trench my footings into my ground + form them on the surface with 2x4 for leveling / squaring ease. good luck. at this point it's more about doing than listening to internet how to videos.
@duomaxwell2201
5 ай бұрын
Always
@joshc4519
4 ай бұрын
Absolutely me. I majored in Mechanical Engineering and want to build my own house. Problem is, I am scrutinizing every little detail before I even draw plans. Maybe after 20 years I will get it done :) In a serious matter, you cut one wire, and we don't have water, heat, much light, or even an outhouse. I can live with it a week or so, but how about years??? People do not realize just how INCREDIBLY DEPENDENT we are on the normal functioning of society. I don't want to live that way. Second, I believe the Bible, and I believe it prophesies that the worst is yet to come and soon. Another aspect is this prophecy: "there was a great earthquake, such as was not since men were upon the earth, so mighty an earthquake, and so great... and the cities of the nations fell... and every island fled away, and the mountains were not found. And there fell upon men a great hail out of heaven, every stone about the weight of a talent (75 lbs)" - Revelation 16:18-20. In other words, every skyscraper is coming down, and at least some, if not all, mobile homes being cannoned from above. I just don't know if I can, or if I should even try to, build to that standard. Maybe I shouldn't try for a 1000 year house life, but just a 16 year or 63 year - whenever the events happen.
@timoomo5944
2 жыл бұрын
Highly informative. You summed up geotechnical analysis and foundation engineering in 14 minutes.
@BrendanHasty
2 жыл бұрын
Hi Timo, thanks for watching and the support. Aim to provide.
@indikakaluarachchi6765
Ай бұрын
As a mature student doing a diploma in Building and Construction your explanation are invaluable to reinforce lectures. Thanks for sharing your knowledge 🙏
@brdnlng
Жыл бұрын
👋 I'm a mechanical engineering grad who just got a job as a structural engineer. Your videos are helping me learn more about the knowledge I need for my job. Thanks!
@BrendanHasty
Жыл бұрын
Hi Braden, glad my videos are helping. your mechanical degree would have given you a good founding in structucal mechancis which will help out alos
@malikdaniyel146
2 жыл бұрын
Hi Bredan, your video made me reminisce when I was doing my final paper on types of foundation especially the piling systems. Thanks for making this video and keep up the good work for engineers and designers.
@BrendanHasty
2 жыл бұрын
Hi Malik, thanks for watching and the support. Hope I didnt miss anthing.
@malikdaniyel146
2 жыл бұрын
@@BrendanHasty you covered the fundamentals of footings and foundations. It would be great to showcase how to carry out an inspection and what to look for during site visits.
@BrendanHasty
2 жыл бұрын
Hi Malik working on arranging a site inspection
@malikdaniyel146
2 жыл бұрын
@@BrendanHasty I do look forward to this video
@amirulrasyid9380
2 жыл бұрын
Well explained, easy to understand!
@BrendanHasty
2 жыл бұрын
Thanks for the support Amirul.
@iffythegoldencrust4255
2 жыл бұрын
Thank you Sir 💯 The amount of value in the videos is mountainous
@BrendanHasty
2 жыл бұрын
Hi Iffy, thanks for the support.
@SuperBaz23
Жыл бұрын
Love your work man, Amazing graphics on your videos and you get the information across so clearly. Your an absolute legend
@BrendanHasty
Жыл бұрын
Appreciated mate! Always accept any suggestions to make my content informative and enjoyable.
@irisiris90
Ай бұрын
As another mature age building and construction diploma student I really enjoy and appreciate your video. Thank you!😃
@BrendanHasty
Ай бұрын
I'm glad my content is helpful, good luck on your study!
@lukew3940
2 жыл бұрын
Another great video, really wish you were my uni lecturer.
@BrendanHasty
2 жыл бұрын
Hi luke, thanks for the encouragement. Glad that i can help spread the knoledge.
@ratherbefishing5739
8 ай бұрын
Worth mentioning is construction specifications in northern climates require the footing to be placed below the frost depth of the region. It's for this reason that the majority of buldings in Canada and norther US have full basements
@DeepakKrishna11
2 жыл бұрын
Excellent Brendan. That was a really good explanation on why certain types can be used based on conditions. Keep it up.
@BrendanHasty
2 жыл бұрын
Hi Deepak, thanks for the continued support.
@OisinHiggins
2 жыл бұрын
Hi Brendan, Great overview. Could you cover low environmental impact foundations; eg. Foundation reuse, timber piles, vibro-stone, rammed earth, ground improvement strategies and whether these are likely to be suitable commercial applications and their implications on Professional Indemnity (PI) please?
@BrendanHasty
2 жыл бұрын
Hi Oisin, thanks for the suggestion will had it to a list, footing can have a big impact on the embodied carbon.
@adamarditi82
7 ай бұрын
Hi there. Thank you for providing these very helpful explanation. You did a great job. How would you explain the difference between a grade beam and a spread footing?
@willcade5703
2 жыл бұрын
Super informative, great videos, sometimes I struggle to follow you because you move so quickly. Rewind button has been helpful.
@BrendanHasty
2 жыл бұрын
Thanks Will for your support! I will try to slow down a bit.
@kk2485
Жыл бұрын
If you are building a commercial greenhouse, approx. 1000sq ft. would it need a footer?
@mannycalavera121
Ай бұрын
What do you classify footing requirements for transportable homes? Most only require 200mm compacted grade?
@kamalhakimi2559
2 жыл бұрын
Hi thank you Engineer Brandon.Good knowledge.
@BrendanHasty
2 жыл бұрын
Hi Kamal, thanks for watching.
@natnaelayele4853
2 жыл бұрын
We are highly benefited from your expertise and knowledge
@BrendanHasty
2 жыл бұрын
Hi Natnael, glad that I can provide
@gaebren9021
2 ай бұрын
Thank-you for your video. Waffle pod internal slab with an (non-waffle pod) external concrete area that has an edge thickener and saw cut joint. So, like a patio but not step-down.
@punkskumar5271
2 жыл бұрын
Hi Brendan, would appreciate a video on Uses and limitations of Finite Element Analysis. Can't find many channels like yours dedicated to structural engineering.. Keep going.👍
@BrendanHasty
2 жыл бұрын
Hi punks thanks for the suggestion it would be an interesting topic.
@johnbrough8381
8 ай бұрын
I thoroughly enjoyed this video. I have a question: can you have a monolithic floor slab with a perimeter footing that supports periodic columns for the second floor?
@phillipyeaman5732
2 жыл бұрын
More great content! Thanks Brendan! For the past two years I've worked as a site engineer, however, I never had as much passion for it as I did for the structural engineering I did at uni. I've recently made the decision to change the direction of my career and pursue work as a structural design engineer and I've been using your videos to re-educate myself on some of the stuff I learnt in uni. Unfortunately, finding work has proven to be rather difficult, as I'm also new to Melbourne and don't have many connections here. With two years of experience in the industry as a site engineer having lots of practical experience with structures, I really though that getting a grad position as a structural engineer would far easier than it's proven to be. Regardless, I'm still driven to continue down this path and your videos have certainly kept my motivations high, so thankyou for that. Would you have any advice for someone in my position?
@BrendanHasty
2 жыл бұрын
Thanks so much for your support Phillip and I'm glad my content has inspired you. I would suggest to try apply from small firms, also many companies recruit on LinkedIn as well. Good Luck on that, trust yourself, keep learning & improving!
@johnstrawb3521
2 жыл бұрын
Good work. As an architect and teacher with an emphasis in structural engineering, I would have enjoyed this comprehensive overview when starting out. The only thing I'd change is (and I'd definitely change it), instead of rushing into detail (a fundamental pedagogical error) I'd speak more broadly in a longer overview, generalizing about foundation and footing types, then about soil types before going into detail. I'd also slow down the edits. Brains need time to breathe while taking in information, especially in dense. Cheers,
@BrendanHasty
2 жыл бұрын
Hi John thanks for the suggestion on improvement. Greatly appreciated. It can be a fine line between too fast and too slow but agree the edits became to fast it needed some breaks to digest. Agree on restructuring to.
@squeekhobby4571
2 жыл бұрын
Many thanks for the content. Can you elaborate pros and cons on shallow foundations
@BrendanHasty
2 жыл бұрын
Hi Squeek, I can do a video on this, most of the time you want to do shallow footing unless you have poor soil or too higher load.
@squeekhobby4571
2 жыл бұрын
@@BrendanHasty : many thanks. I am from climate zone 5/6 zone, us. Europe has been doing shallow foundation for frost protection for many years. In US Canada stilt many are going with traditional footer and stem wall foundation.
@mohammedalshoukri7022
2 жыл бұрын
Thank you Brendan for the video :)
@BrendanHasty
2 жыл бұрын
it is my pleasure, thanks for the support.
@bigmao1464
2 жыл бұрын
Love your videos mate, just binged a fair few of them. I was wondering if you offered any engineering review services ? I got engineering done for a shed slab here in melbourne but most of the concreters I'm sending the details to are saying that the slab is overkill and that it should be on bored piers rather than a deep raft slab.
@BrendanHasty
2 жыл бұрын
Hi Big Mao, thanks for the support. I have limited time so at the moment I wouldnt have time to do any consulting , however if you send me a email I have forward it onto someone.
@yousafkhan7622
8 ай бұрын
sir, your new subscriber here. for 2 story load bearing house construction!can we use concrete solid blocks in foundation with out any beam and column?soil is hard strata
@siriosstar4789
2 ай бұрын
your content is very good and the delivery is a bit too fast . the points are clear but they all seem run together as there is little if any pause between them .
@RakeshDas-uo1hl
11 ай бұрын
Do you know any foundation design or materials used which can last more than hundred years? Concrete, I heard can start to give up in 50-60 years. What do you think about rammed earth construction? How are they comparable to concrete?
@michaelsabbagh2673
2 жыл бұрын
Thx brandon.where do you think it is better to provide the ground beams? At ground level below slab on grade or between the single foundations at foundation level? A video on top down construction would be a nice video to see! Thx again
@BrendanHasty
2 жыл бұрын
Hi Michael if you have pad footing it is better to have the ground beams at the same level.You want your footing to be founded on the same level.
@arjunpandava7640
11 ай бұрын
Great content and information. Really, truly, sincerely. However you need to speak at a slower pace. I had to adjust the playback settings to .75 to fully appreciate and hear clearly what you were saying. Perhaps it's just me. Anyway, great content, and MUCHO thanks.
@BrendanHasty
11 ай бұрын
I do speak a bit fast, apologize for that mate. Thanks so much for your support!
@mohammedlasmi649
2 жыл бұрын
Good explanation. Thanks too much
@BrendanHasty
2 жыл бұрын
Thanks of the support Mohammed. Glad that you enjoyed it
@mohammedlasmi649
2 жыл бұрын
@@BrendanHasty welcome
@sonsoffishes1
Жыл бұрын
Thanks!
@uBenkiff
2 жыл бұрын
Great stuff
@BrendanHasty
2 жыл бұрын
Thanks for watching
@rawaaalhilween8333
2 жыл бұрын
hello Brendan, what it happens if the steel bars are distributed ununiformly in compression and tension zone due to poor workmanship, would it lead to cause additional flextural moments and torsion, and shear stresses, could we solve this problem by using carbon fiber strips, or what are the other suggestions to solve this kind of problem ? thanks in advance
@BrendanHasty
2 жыл бұрын
Hi Rawaan, strengthen using carbon fibre is limited as it is non-ductile, 10 to 30 maximum additional capacity. Still lots of assessments to prove it up. If really bad may need to remove the concrete using high pressure water, replace the reinforcement and resources.
@explorerjlc1743
2 жыл бұрын
what can you do if the soil is susceptible to liquefaction, but also highly corrosive ?
@BrendanHasty
2 жыл бұрын
Hi JC in highly Corrosive soils you need to increase concrete covers and special concrete mix design. for liquefactions typically you need to install pile suport which can be out of concrete
@johnalexanderlagman2857
Жыл бұрын
Why spread footing only have bottom reinforcement bars?
@BrendanHasty
Жыл бұрын
Because in most spread footing the top is always in compression. You only really need to reinforce where tension exists unless you need to resist shrinkage cracking
@Joshcodes808
2 жыл бұрын
Brendan, where would you rank Chert + clay mix (above or below sand)?
@BrendanHasty
2 жыл бұрын
Typically sand is better, it is more stable. Unless in areas subject to liquefaction.
@Joshcodes808
2 жыл бұрын
@@BrendanHasty thanks for the reply
@gustavoornelas4717
2 жыл бұрын
As a first year undergraduate civil engineer, your videos are very helpful, informative and gives further important knowledge to someone like me who is just beginning to learn the structural engineering fundamentals. Keep up the amazing videos Brendan!
@BrendanHasty
2 жыл бұрын
Hi Gustavo, glad that I can help, thanks for the support.
@Chambreak1234
2 жыл бұрын
Don't forget to correctly design the pad foundation because sometimes the dimensions are too small to apply classic RC formulas
@BrendanHasty
2 жыл бұрын
Hi chambreak agree most pad footings should be designed using strut and tie.
@mathxnoob
2 жыл бұрын
Can i use your videos as a supplementaty media for my class in CE?
@BrendanHasty
2 жыл бұрын
Not sure it is external study, you can link to them.
@civilideas1925
2 жыл бұрын
👍🏻
@BrendanHasty
2 жыл бұрын
Thanks civil
@regdor8187
6 ай бұрын
The voice sounds so strained that it must put weird forces on the facial structure....
@MrBlindjay
2 жыл бұрын
First!
@BrendanHasty
2 жыл бұрын
thanks for helping the youtube algorithm
@mikebastani2243
2 жыл бұрын
Slow down man!
@BrendanHasty
2 жыл бұрын
Hi Mike agree the cuts where too quick in this one.
@bharath9in
11 ай бұрын
What is the difference between spread footing and turned down footing? Which is good for buildings like retail or light industrial(flex spaces).
@adebumolaismail3505
2 жыл бұрын
Hello Hasty, you talk too fast pls. And you barely use illustrations for your explanations. Thanks
@BrendanHasty
2 жыл бұрын
thanks for the suggestions on improvement
@gusfitzgerald7155
4 ай бұрын
great video for a carpentry apprentice to stumble upon. Very informative and relevant to Australia. Thanks Brendan
@BrendanHasty
3 ай бұрын
Glad you enjoyed it
@deyuhao8538
2 жыл бұрын
Great stuff! Would you be able to comment on the load combination used to determine pad size or checking if the soil capacity has been exceeded? The book Concrete Structures says it should be the unfactored load combination, which is consistent with the practice used in many other countries, but this is not mentioned anywhere in AS1170.0. A bit uncertain of the engineering practice in Oz. Thank you in advance!
@BrendanHasty
2 жыл бұрын
Hi Deyu, this is something that can be discussed with the geotechnical engineer. as bearing capacity is governed by settlement, it is typically based on a services load so G+LLR. but it is best to conform with the geotechincal engineer. hope it helps Cheeers Mate.
@dykodesigns
2 жыл бұрын
A combination of clay and peat is a very weak combination of soils. It always results in using deep precast piles. Some historical building in the netherlands where built on this type of soil with just stepped masonry footings. Foundation repair has become a necessity in these area's.
@BrendanHasty
2 жыл бұрын
Hi DYKO, foundation repair is difficult, specially when dealing with masonry. Alot of building repair is due to foundations.
Пікірлер: 102