I made this ultimate DIY CO2 diffuser for my planted aquarium using an old, broken terracotta pot and a small plastic measuring cup. It cost me nothing to make and it works just like a branded diffuser. It will work best when used with a pressurized CO2 system; However, it will work just fine with a DIY setup.
Like a branded CO2 diffuser, this one also needs some pressure to work. If it is used with a DIY system, some points need to be kept in mind:
- This will only work when a sufficient amount of pressure is created in the C02 generator bottles. Mine worked after about 12 hours.
- There should be no leaks in the system; Otherwise, it won't work at all.
- The disc should be about 1 to 1.5 mm thick, not more than that.
It will produce a fine mist of bubbles, allowing the C02 to effectively diffuse into the aquarium water and help the plants grow properly.
Useful Links :
Superglue - amzn.to/3Zg5zh2
Silicone - amzn.to/3rbYgKJ
Check Valve - amzn.to/3Oxd4g6
Suction Cups - amzn.to/3ZhHh6p
Airline Tubing - amzn.to/3NbyHQF
🔔 SUBSCRIBE for more videos just like this 👇
/ @madebykm
JOIN this channel to get access to perks 👇
/ @madebykm
LIKE my Facebook page 👇
/ madebykm1
#plantedtank #plantedaquarium #aquarium #fishtank #madebykm
Негізгі бет Үй жануарлары мен аңдар 🪴🫧 Ultimate DIY CO2 Diffuser for Your Planted Aquarium ☘️🌱
Пікірлер: 87