Such an awesome community. I didn't realize it had grown so large! I want to start one of these businesses in the future!
@Precious_Plastic
Жыл бұрын
The future will be now 😁
@ranocchiasimpatica
Жыл бұрын
Me laying on the sofa: oh yeah let's watch this video, you never know, i might need to make a plastic sheet tomorrow
@ranocchiasimpatica
Жыл бұрын
But yeah the sheets do look pretty flawless!!! Good job!
@dittagecoeco2738
Жыл бұрын
@@ranocchiasimpatica ahah alla fine ti hanno convinta. Mi sa che cmq a prescindere dai lastroni di plastica, potrebbe essere la bellezza ossessiva di un lavoro artigianale ad averti intrigata. Ciiaooou
@Precious_Plastic
Жыл бұрын
Waiting for your sheets 🔥
@ranocchiasimpatica
Жыл бұрын
@@Precious_Plastic lol
@dmbrookfield
Жыл бұрын
I have to say I loved watching both the videos from TRS great detail on the problems, sort of makes you want to go visit them :)
@nisdedenorth6095
Жыл бұрын
Please share more details on the surfaces of the hot press. What is the thickness? Are you using the same heating elements from the original design?Any details to look for. It would really help people like me who is in the process of building their sheet press set-up
@rennatg
Жыл бұрын
Oh yeah please share some more about the machine, I’m also in the process of building a sheet press and I’m very interested about those thicker aluminium plates and how did you do with the resistances? Thanks!
@Carolineshavhani
4 ай бұрын
Thank you so much for this video. Is enlightening. Now I feel like trailing this.
@lenkakraus9769
Жыл бұрын
Guys you are amazing❤
@BTom16
7 ай бұрын
This would be amazing countertop material. These folks are doing brilliant work. ❤
@polylabnz2652
Жыл бұрын
Awesome! Thank you guys. I'ts gonna take me a while to get to such great quality sheets, haha. But I'm not giving up!
@Precious_Plastic
Жыл бұрын
And now have the knowledge! Let us know how it goes
@yawwilliamssalifu4677
Жыл бұрын
this is genius precious indeed good work done
@jamesrowlands8971
Жыл бұрын
I'd love to hear some in detail safety information about handling HIPS as we've so far avoided it due to a lack of clarity on that.
@victorycalibre9320
11 ай бұрын
amazing one👍👍👍👍👍👍🔥☕
@Precious_Plastic
11 ай бұрын
Hope is useful 🤙
@recyclingguy
2 ай бұрын
What solution are they using for 6:16 mould release? What temperature temperature does it work with?
@geraldhoenderdos6853
4 ай бұрын
Where can we get plans for the press?
@mavigogun
Жыл бұрын
I presume the mold is OVER FILLED, so that applied pressure encourages voids to escape out the sides as the squeeze is applied. Here's what I don't get: once both faces are in contact with the mold frame, no more pressure can be applied... yet, part of their formula for bubble-free sheets involves interval cranking of the hydraulic press.... which would be impossible if the frame mold were in contact with the upper press face. Is the top face of the press never in contact with the frame mold? Is pressure in the mold entirely relying on the viscosity of the the plastic at melt temperature?
@Kato414
Жыл бұрын
I had the same question in mind.
@dmbrookfield
Жыл бұрын
I'm also interested in this, but bubbles implies air, in concrete you would use a concrete vibrator to agitate the bubbles, but you can't agitate, but as air escapes and the volume changes you would need to increase pressure again? I guess at an industrial scale or more complex press (expesnive), that press would be automatic and would maintain a constant pressure. Both the videos were brilliant on this topic.
@mavigogun
Жыл бұрын
@@dmbrookfield While eliminating some color patterning control, the common method to eliminate voids is to fill the press mold from an extruder not unmelted shred stock. A plunger-type top mold would allow for greater sustained pressure application; looking back at the development of the Precious Plastic Sheet Press, early versions featured plunger-type mold tops. Flat mold tops reduce needed clearance, fabrication costs, ease removal and maintenance demands, reducing production time and labor costs. All design is a trade.
@dmbrookfield
Жыл бұрын
@@mavigogun Thank you so much for the answer, I keep forgetting to check for replies. Yup everything is a trade off, increasing the pressure with a motorised more powerful press would do more as well I guess, but that increases costs.. Thanks :)
@jasongroupindustries
4 ай бұрын
Helloo Impressive work you've done. What is the minimum and maximum thickness of plastic sheet that can be done
@C-M-E
7 ай бұрын
I can think of a few things to optimize production, but with their relatively 'low tech' approach working so well, it'd be difficult to throw anything on other than to boost production rates. Getting rid of bubbles is really quite easy, which is to dry your material, usually for several hours at half of what your molding temperature is running. Now if you want to crank out as many as you possibly could in one day, having water-cooled platens would make a Huge difference. That would be the single largest difference and relatively easy to do, especially if you have access to CNC partners. Pumps don't need ridiculous flow rates (making the operation cheaper) and the water source itself can be recycled over and over without much degradation in a closed loop, as the water is never coming into direct contact with your plastic.
@mohamedelsaka
Ай бұрын
What type of silicone do u use?
@crowviki6583
7 ай бұрын
Great video, may i know how much the machine costs and where it is available
@travisjohnston1923
5 ай бұрын
Why use HIPS? It dissolves in water... Kinda why it's used for supports in 3-d printing with PLA...
@johnpyaso1846
10 ай бұрын
Bro, love followed your program.lam interested can you come to Papua New Guinea 🇵🇬 in port Moresby and teach me so that we learn from your knowledge.Thankyou, John Pyaso.
@chalilopez10
7 ай бұрын
Hello, the cooling press jack for how many tons is it? thank you
@Rachelcenter1
7 ай бұрын
can you come up with a way for the average person to make sheets themselves. The average person doesnt have the equipment that you do.
@briepower8226
Жыл бұрын
Hi, im interested in doing this. What price do these sell for, please? Also, examples of a few types of customers who are buying them. Because I'm concerned that they go to the bigger companies. No?
@rakeshshah8801
Жыл бұрын
Brilliant
@TheSeaMonkeyProject
Жыл бұрын
awesome video guys! how much do you pump up every 10 mins?
@Precious_Plastic
Жыл бұрын
Hey guys :) they pump until "can't no further", sorry not a definite number /:
@bridgetkundwa9359
11 ай бұрын
hello how can i get materials/ machines for starting ths busness in our community there are many waste plastics
@xaviercarrillo3088
10 ай бұрын
I probably missed it, in the last video but what do you do with the final product (the sheets)? just sell it to businesses or do you create thing with them? thank you.
@Precious_Plastic
10 ай бұрын
Both! Depends on your business model. We've seen both models working, depends what you prefer to do
@benmcintyre1538
Жыл бұрын
What type of plastic #? are “hips”?
@Precious_Plastic
Жыл бұрын
HIPS stands for High Impact Polystyrene, so ye #6
@frankwolf9187
11 ай бұрын
Where can you buy these sheets?
@Precious_Plastic
11 ай бұрын
www.therecyclestudio.com/
@AuroraSinclair
Жыл бұрын
Step one: Prunes
@plastmakers
Жыл бұрын
The best video about sheet making tips I have ever seen! Great job
@Precious_Plastic
Жыл бұрын
Thanks tomas!
@samueliduo-iq8hc
Жыл бұрын
@@Precious_Plastic please what is the cost of your medicines?
@yunusyahya1677
4 ай бұрын
Hi I want to start recycling plastic from my place Kenya. I'm looking for a machine that can work well please help. Thank you
@kamotorosyan1106
Ай бұрын
Not sure what the confusion is, i find prunes usually do the trick
@mavigogun
Жыл бұрын
Pure GOLD! -or, rather, "pure PLASTIC excellence!"
@dittagecoeco2738
Жыл бұрын
They call It precious plastic 😂
@Precious_Plastic
Жыл бұрын
Glad you enjoy 🔥❤️🥰
@krobot4703
3 ай бұрын
What are some of the primary uses of these large sheets? Are they mainly fashion or design pieces? Can they be used in a source of manufacturing? Im genuinely curious as to what happenes after the sheet is made.
@ronyerke9250
7 ай бұрын
I once worked in a shop that made molds for blowmolding. Those molds had passages and fittings for liquid heating and cooling. Do you have any plans to try that out?
@raduion9492
8 ай бұрын
Hello, thank you for such nice video! Could you please tell me the type of silicone you used for preparing the mould?
@ilantzriker7504
Жыл бұрын
Another great video with very useful information. thanks
@danielbraverman3349
Жыл бұрын
THank you very much. That was usefull!!
@Precious_Plastic
Жыл бұрын
Super happy this was helpful!
@shankariab1687
Жыл бұрын
Satisfaction when something is done perfectly 😌
@Precious_Plastic
Жыл бұрын
Yay!!
@dittagecoeco2738
Жыл бұрын
Exciting results and style 🔥🔥🔥. I hope to get there one day 🤛
@Precious_Plastic
Жыл бұрын
Time, failures, iterations, and a bunch of motivation will surely get you there!
Пікірлер: 65