I summarized the way to DIY a standing desk using a made-to-order tabletop. Please refer to the following for the products, parts and tools that I took up in the video.
<The products that I used in the video>(The prices change by time so this is just for your reference)
■■■Legs of a Standing Desk■■■
Made by FLEXISPOT(This lineup is from 2020/12/19)
<Manual>
◎H1 amzn.to/344J6bf (¥18,500)
◎H2 amzn.to/3gGBYa5 (¥21,000)
<Automatic_ Narrow lifting range>
◎EC1 amzn.to/345m6ZK (¥23,000)
EN1 amzn.to/3nommKU (With alarm/memory)(¥30,000)
◎EJ2 amzn.to/2W4W1pd (¥30,000)
<Automatic_ Wide lifting range>
◎E3 amzn.to/37aPRun (¥45,000)
◎E7 amzn.to/3mfKOh3 (¥48,000)
■■■Made-to-order tabletop■■■
Online Retail for Wood MARUTOKU SHOP
shop.woodworks...
<Low price / Low texture>
◎Rubber Laminated Wood (¥13,520)
shop.woodworks....
◎Acacia Laminated Wood (¥15,320)
shop.woodworks....
<High price / High texture>
◎White Oak Solid Wood (¥43,580)
shop.woodworks....
◎Walnut Solid Wood (¥60,860)
shop.woodworks....
※All of the prices are for the cases of 30mm, 650mm and 180mm. I didn’t add an anti-curl option because the legs of the standing desk play a role as an anti-curl.
■■■DIY-ing the table top wood■■■
<Things to use during the whole task>
◎Masking tape for the floor amzn.to/3oX5tHZ (¥177)
◎Grip gloves for carrying amzn.to/3a3ZRY3 (¥583)
◎Mask (The one you use daily is OK)
<Surface treatment(Polishing the wood)>
◎Sandpaper #240 amzn.to/3gIDwRg (For flat surface)(¥85)
◎Sandpaper #180 amzn.to/37b6Pc0 (For chamfering)(¥85)
◎Sanding Block amzn.to/3436Z2U (¥291)
◎Dustcloth(For wiping the wood chips) amzn.to/3oMOrw6 (¥365)
<Coating>
◎Coating Material amzn.to/380n2je (¥1110)
◎Plates for the coating material amzn.to/37T8dPG (¥242)
amzn.to/3oLDPNW (This is OK too)(¥86)
◎Paint Brush amzn.to/2LvtFmb (¥555)
◎Rag(Cloth) amzn.to/3nbVQoj (¥657)
◎Rubber Gloves amzn.to/3a4e2fC (¥498)
◎Sandpaper #400 amzn.to/2IHKyJp (¥90)
◎Cleaning Solvent for washing the paint crush amzn.to/3oX75l1 (¥419)
<Waxing>(This process is not necessary)
◎Wax amzn.to/3a2dTt4 (¥2,970)
◎Rag→Use the same one you used for coating.
◎Brush for Finishing amzn.to/3qSFlzM (¥880)
※Reference video for coating restachannel
• DIY|ワトコオイルの塗り方~テーブルの天板...
※Waxing 参考動画 Shiraishi Woodworking channel
• 【週末DIY】プロ直伝!はじめてのBRIWA...
■■■Tools to install the tabletop and the legs with the insert nut■■■
<Parts>
◎Insert nut (M6×13) amzn.to/3qbU4W2 (¥448)×3
◎SEMS Screw (M6×15) amzn.to/2JvE00c (TRUSCO) (¥305)×2
OR→amzn.to/39sT89U (ONOTSUKA) (¥978)
※ You will need 12 each insert nuts and the screws. Please check the quantity per unit carefully before purchasing.
<Tools_ others>
◎Electric Screwdriver amzn.to/3d4bkoH (¥13,648)
◎Drill for Woodworking amzn.to/35qlbT9 (¥1,271)
(Insert nut M6→Open a 8.7~9mm diameter hole)
(Make the depth of the hole as same as the length of the insert nut)
◎Countersink Drill Bits amzn.to/2YmpIo9 (¥990)
(Use to fit in the head of the insert nut)
◎Socket Set Screw Wrench amzn.to/2YlDlUI (¥823)
◎Plastic Tape amzn.to/3gGY2BF (¥68)
◎Wood Glue amzn.to/3bPf4dz (¥378)
◎Aluminum Ruler amzn.to/34rjBBg (¥1,036)
※The common way is to install by using the wood screws attached.
※Please refer to this video too on how to install the insert nut.
• DIY│IKEAの天板でPCデスクを作る方法
---------------------------------------------------------------
<SNS>
【Instagram】 / crossty.design
【Twitter】 / crossty_design
【Tik Tok】 / xt_crossty
---------------------------------------------------------------
<My crafting channel>
/ xt_crossty
---------------------------------------------------------------
#Computer Desk #Standing Desk #DIY
Негізгі бет The way to make/think about a standing desk using a made-to-order tabletop【Complete Explanation】
No video
Пікірлер: 163