Can you please test the Thermalright Silver Soul 135 under the same condition? Me and many other people use this air cooler (considered to be the best 135 mm air cooling option) in combination with NCASE M1/M1 EVO. It would be great to have direct and relevant comparison with Peerless Assassin 120 Mini, which looks very promising.
@DalraeMyo
6 ай бұрын
Not so long ago, I used the Silver Soul 135 model with the 7950X. The bundled cooler of the Silver Soul 135 model has a maximum 1850 RPM, while this PA120 MINI is the same looking cooler, but it has a specification of 1500 RPM that is about 20% lower than the maximum RPM. Nevertheless, PA120 MINI was superior in cooling performance, and even if community opinions were put together, PA120 MINI was evaluated better than Silver Soul 135.
@richardfarmer6570
6 ай бұрын
Been waiting for some reviews of this cooler as it would be perfect for the Ncasee M1 EVO, looks pretty good.
@ready1player31
6 ай бұрын
Exactly what I was thinking for the M1 Evo, with 100W - 150W CPUs this might by great. But the M1 Evo V2 is purported to be able to support the NH D12L from Noctua which is better than this cooler
@maxpain177
5 ай бұрын
@@ready1player31 When V2 will be available?
@XHeavygunX
2 ай бұрын
I haven’t been able to find any benchmarks comparing the PA mini and the D12L
@ready1player31
6 ай бұрын
Wow, this tiny cooler is good for up to 180 watts? 80c is a good temperature ceiling for me. That goes a long way on AMD. Glad to see it. Gamers Nexus also found this to be good for VRM cooling since the fan pushes air under the heatsink too. I am hoping i can pick this up for a build in the Ncase M1 Evo
@XHeavygunX
2 ай бұрын
My plan is to use this assassin mini cooler but use the round noctua fan from the D12L.
@latt3460
29 күн бұрын
silversoul 135와 비교해서 확실히 좋은가요?
@nepo10ball
13 күн бұрын
Can this cooler handle r 7 7800x3d and 7900x3d??
@DalraeMyo
13 күн бұрын
For the CPU you mentioned, I think this cooler will be sufficient.
@overmaxx
2 ай бұрын
Will this cooler be better than the ID-Cooling SE-207-XT SLIM?
@leifeinar1975
6 ай бұрын
Great review. And I want a pair of those wifi antennas. links or name??
@DalraeMyo
6 ай бұрын
You will find it by searching RHCP 5.8G Antenna on Google.
@hwi7114
6 ай бұрын
Good info. Was just looking at this cooler last night and was curious how it would perform.
@natw353
6 ай бұрын
You can't mount square 120mm fans?
@seibertron500
6 ай бұрын
since it uses a traditional clip mount design on the fins, I reckon you can. you just need clips that go into holes for square fans
@DalraeMyo
6 ай бұрын
If you get a separate normal 120mm 25T FAN Clips, the mounting itself is possible, but the height will exceed 135mm.
@notme6254
4 ай бұрын
this PA120 Mini compared to ID-Cooling SE-207-XT SLIM, who wins? cause both almost identical, with 135mm-tall, use 120x25mm fans, but the SE-207-XT Slim has 7 heatpipes while PA120 Mini only has 6. for pricing, in my country both only have $5 difference, SE-207-XT is the cheaper one. what should i get?
@joshfetil6059
2 ай бұрын
Hi sir can this cooler handle the 5700x3d and can I add an extra fan to the mini also is the like a diffence with the mini and pa120 in terms of performace overall my case max cpu cooler height is 160mm i’ve test fit the ak620 and I’cant properly closed my case
@godwhomismike
6 ай бұрын
Nicccceeeeeeeeeee - I was waiting for a review on this one!!!! Glad I subscribed :)
@natalie2070
Ай бұрын
I got one of these today and what I noticed is the part of the heatsink k that comes further out is roughly 92mm. I’m wondering if in addition to the 120mm fan in the middle of two 92mm fans on this upper portion of the two towers would increase the performance a bit more.
@yurkin_vb
6 ай бұрын
I really want the thermalright to be made on PA90 2-tower cooler with 92 mm fans like a JIUSHARK JF200 MINI. Or with one 92 mm fan with 6 or 7 pcs heatpipes like ak90 or made venomous mini.
@sourcilavise3788
6 ай бұрын
I've also undervolted my 13600K to -0.09 and I get something like 130-135W all cores so I should be getting something like 70 degrees max. I'm getting it today as I'm trying to lower the sound of my current setup.
@tonicardoso380
6 ай бұрын
Thanks
@dkd-de3jb
6 ай бұрын
pa120mini가 si100보다도 방열판 성능이 좋았나요? 영상은 조건이 조금씩 달라서.. 일반적인 25t팬클립들은 전부 잘맞는지도 궁금하네요
@DalraeMyo
6 ай бұрын
단순히 방열판 면적으로 보더라도 PA120 MINI가 2배가량 됩니다. 싱글타워 vs 듀얼타워 정도로 생각하시면 될것같습니다. 팬클립은 구태여 테스트하지 않은이유가 일반적인 사각형 120mm팬을 넣게되면 위로 너무 튀어나와서 쿨링팬의 만들어내는 바람을 반밖에 못쓰는 느낌이었습니다.
@dkd-de3jb
6 ай бұрын
감사합니다
@evoemperor3776
2 ай бұрын
The fan should be mounted at the ram side heatsink so that the fan will vacuum the air at the front and blow at the rear. But because he mounted it io side the gap at the front will make the ram side heatsink useless.
@mittopii
5 ай бұрын
Compare PA120 with SS135, please :D
@RastaFarian-cj2sw
4 ай бұрын
I want two fans on that cooler but its a standard size 120mm arctic fans. Is it possible to put it?
@alikboyd
Ай бұрын
What do you call that wifi and bluetooth antenna?
@antimatter7455
6 ай бұрын
@DalraeMyo compare to peerless assassin 120 se, peerless assassin 120 mini is better sir?
@DalraeMyo
6 ай бұрын
MINI products provide excellent performance in environments where low profile CPU coolers are required, but there will be no significant benefit if you use a case that is compatible with a typical height CPU cooler.
@antimatter7455
6 ай бұрын
@@DalraeMyo Is the PA 120 mini compatible with LGA 2011-3 sir? because on the website there is only LGA 1xxx LGA 2011 and 2066 I plan to buy 2x PA 120 mini for my server which uses dual CPUs (LGA 2011-3), but I don't know if the socket supports or not -_- in terms of temperature, is the PA120 mini cooler than the PA 120 se sir?
@DalraeMyo
6 ай бұрын
Sorry I've never used the CPU used for the server so I'm not sure if it's compatible with the 2011-V3 socket. The PA120MINI uses a smaller heat sink and one fan than the PA120SE. If it is an environment where the PA120SE can be installed, we expect the PA120SE to provide more robust cooling performance.@@antimatter7455
@DonnyShine
3 ай бұрын
you get a thumbs up for using Tchaikovsky
@Justguy363
2 ай бұрын
What's the best best cpu cooler that is under 150mm and can handle ryzen 9 7950x without limits? (default settings). You can tell all possible options under 150 mm if theres any.
@ready1player31
Ай бұрын
Noctua NH D12-L
@ВладЮрченко3
6 ай бұрын
neither on the official site nor in the reviews there is no data on the size of the mounting seat to the processor
@Mr905Sal
6 ай бұрын
How much height is the ram clearance?tq
@DalraeMyo
6 ай бұрын
It looks more than 50mm.
@Mr905Sal
6 ай бұрын
Thanks for the feedback much appreciated
@jeddimaster5393
4 ай бұрын
had this cooler last week frankly it gets hot easily because it only fits one fan on my nr200, im using ryzen 5 5600x and I plan to go back to my se 224xt
@irvinggarcia4705
3 ай бұрын
Did you do it? I'm thinking to buy it because I also have NR200P and I wanna upgrade my cpu to R7 5700x3D, my current cpu is R5 5600. What do you think?
@ed_junior
5 ай бұрын
My CPU is i7-14700K. Is there any Air cooler or i have to go to some AIO ?
@DalraeMyo
5 ай бұрын
If you need to lift the CPU power limit, you will have to select AIO.
@godwhomismike
6 ай бұрын
I am assuming that a Ryzen 5700X3D would preform (temperature-wise) around the same as the 142W test?
@DalraeMyo
6 ай бұрын
I think the result will be different from 5700X3D using 1 CCD.
@myrtlekenazjanairo9411
5 ай бұрын
Is there no way to change the orientation of the heatsink in AM4? I know its a silly question but I'm planning on using it on a MATX build and I'm planning on doing bottom to top airflow since the case is so small. Edit: The case does not have a front intake because that is where the PSU sits on and has bottom intake only.
@DalraeMyo
5 ай бұрын
Unfortunately, the bundled AM4kit does not support CPU heat sink 90 degree rotation mounting.
@ryyan24
6 ай бұрын
Nice video! A couple questions for you 1. How well do you think this would cool a 7800x3d 2. How was the noise under load 3. Do the clips fit a regular 120mm fan? 4. Could you test it with two fans?
@DalraeMyo
6 ай бұрын
1. I haven't tested it, but it is expected to provide sufficient cooling performance. 2. The maximum FAN speed was low, so it was not at a level that felt noisy in a load situation. 3&4. When a typical 120mm cooling fan was installed, the cooling fan was too protruding upward to fully utilize the cooling fan performance.
@ryyan24
6 ай бұрын
@@DalraeMyothank you for the reply? also not sure if i missed it in the video, but what's the ram clearance looking like? i'm going to use the same motherboard too
@itsjuantime
5 ай бұрын
You should try the upHere D6DC
@TV-jw8su
6 ай бұрын
이회사 기본 팬 화학 팬냄새 나던데. 팬교체 필수인데 규격이...
@seibertron500
6 ай бұрын
5700X3D review? I would like to see how small coolers would handle that
@DalraeMyo
6 ай бұрын
Unfortunately, there is no test schedule for AM4 socket CPU. However, I don't think there will be a big difference.
@chairman67
6 ай бұрын
Nice cooler.. How does it's performance compare to the Scythe Fuma 3?
@DalraeMyo
6 ай бұрын
FUMA3 has a higher cooling capacity, but I think it will be the same based on ZEN4 AMD CPU.
@daesz
6 ай бұрын
thanks, i was w8ing for this one, i was curious which would be better out of 3 (pa120mini / silversoul 110 with 120t25 fan above it / si100 with 120t25 fan above it / on meshroom d), still cant figure which one to go with tho as tests were done with different room temps and power limits :)
@DalraeMyo
6 ай бұрын
When looking at the heat sink cooling performance of the CPU cooler except for the cooling fan, PA120 MINI was the best.
@daesz
6 ай бұрын
it has a solid weight also (790g) for such a tiny heal sink, thanks for the answer mate @@DalraeMyo
@Garrett120hz
6 ай бұрын
Would you even consider this with a power limited 13900k for strictly gaming? Looking for aio alternatives for the meshroom d
@Franciscoxds
6 ай бұрын
you would need a hiher rpm fan like a p12max, bequiet silent wings pro 4 or even t30 if it fits. 2000rpm should be enough for gaming. this one only goes up to 1500. I have this cpu cooler in the meshroom d with a p12 max running at 2k rpm and still is quiet
@Garrett120hz
6 ай бұрын
@@Franciscoxds with the 13900k? I have a few t30 laying around. Maybe I’ll try it. Just looking for solid gaming temps. 4090fe puts out the heat.
@DalraeMyo
6 ай бұрын
I think 13900K with power limit will be sufficient.
@lenkau
6 ай бұрын
I saw that the fan is actually taller than the heatsink, so it's technically not a really 135mm cooler I guess?
@jens468
6 ай бұрын
it's a 120mm fan.
@DalraeMyo
6 ай бұрын
It uses a 120mm 25T cooling fan. However, the edge of the side edge is cut off, and there is a difference in the position of the screw hole.
@Franciscoxds
6 ай бұрын
can you fit a regular 120mm square fan in the middle without increasing the height? Im thinking on placing a p12 max there
@DalraeMyo
6 ай бұрын
If you install a typical 120mm 25T cooling fan, the height will rise.
@Franciscoxds
4 ай бұрын
@@DalraeMyo i got an artic p12max to fir thankfully
@nhancao4790
2 ай бұрын
@@Franciscoxds P12 Max fits without height increase?
@seanbrady6775
6 ай бұрын
Do you think this cooler will fit in asus z690-i?
@DalraeMyo
6 ай бұрын
Unfortunately, I can't check because I don't have a ROG STRIX Z690-I motherboard right now.
@seanbrady6775
6 ай бұрын
@@DalraeMyo Thanks for your reply! For anyone who is also searching a good air cooler for asus z690-i. I just got a Fuma 3. That cooler seems a perfect fit.
@jclee3748
6 ай бұрын
달래묘님 영상 잘 보고 있습니다 혹시 쿨러 조립할 때 사용하시는 드라이버 모델명좀 알 수 있을까요! 하나 구매하려고 합니다..ㅎㅎ
Пікірлер: 81