In the latest episode on the Balex Metal KZitem channel, we invite you to a fascinating report from FMB (Building Modernization Forum) - a series of meetings devoted to the modernization of buildings. This time we focus on the topic of insulation from the inside, and our special guest is the expert of Balex Metal, Mr. Jacek Łazuka.
0:00 Long introduction :P
3:50 The issue of the myth of "breathing" of walls Deterioration of the humidity and thermal conditions of the partition of classic walls
7:27 Effect of vapor barrier protection on the inside of the partition
8:03 THERMANO GK board with internal thermal insulation
9:40 Thermano GK application - advantages and limitations
12:23 What about insulating historic buildings?
13:31 Thermano GK - an alternative to multipor?
14:35 Other applications of Thermano panels from the outside - announcement of the ETICS system
18:30 Announcement of the next FMB, which will take place in September
18:49 Support in the selection of products.
During the FMB conference, Mr. Jacek Łazuka thoroughly analyzes issues related to thermal insulation of buildings from the inside, with particular emphasis on the difficulties of building physics and moisture issues. In his presentation, he emphasizes the importance of proper partition design to avoid condensation, which can affect thermal resistance. Jacek Łazuka convinces us that regardless of the design assumptions, the wrong approach to insulation from the inside can lead to higher heating costs, as well as to the problem of water vapor collecting in the partition, which can have a destructive effect on the partition itself.
In the video, we will also learn which products are worth using during safe thermal modernization from the inside. Jacek Łazuka recommends gas-tight PIR boards of various thicknesses, from 2 to 5 cm, dedicated to insulation from the inside. It also recalls the important fact that in our climatic zone we must not transfer traditional thermal insulation used from the outside to the inside of the building with impunity, and even if necessary, it is an extremely difficult and risky undertaking.
Join us on the Balex Metal channel and learn the most important information about insulation from the inside to be able to approach the modernization of buildings in a conscious and effective way. Do not miss this valuable knowledge that will allow you to save on heating costs, while ensuring optimal thermal conditions inside your building.
Meet THERMANO GK: balex.eu/produkty/termoizolac...
See the price list: balex.eu/knowledge-base/downl...
Contact the representative: balex.eu/przedstawiciele
See where to buy: balex.eu/gdzie-kupic
Негізгі бет Ғылым және технология Thermo insulation from the inside: Key issues in building physics - Report from FMB
Пікірлер: 7