I have good success with Okay Industries aluminum mags. Mainly use Lancer and Magpul.
@wisemencompany
2 жыл бұрын
I have some buddies that use them 👍🏼
@zexnynex777
2 жыл бұрын
@@wisemencompany GunMag Warehouse soemtimes has them 11$ for the plain ones. 12$ for colors. KInda insane really as nice as they are. also, as far as ETS mags go ive never used them but that "Cam" thing., the auto loader for pistol mags- that thing is fire.
@jonnyl2001
2 жыл бұрын
Honestly thought you skipped Okay bc they are about to stop making them.
@killacamfoo
2 жыл бұрын
Shame they are stopping production
@johnathan485
2 жыл бұрын
Love my e2 mags. I have about 30 of them and they look pretty good to
@rifles_up2263
2 жыл бұрын
You had me at “AR-15’s are important “😂👏🏽
@wisemencompany
2 жыл бұрын
Hahaha they are!
@Evopandawithalumpia
2 жыл бұрын
The Gen 3 PMAG uses a dust cover that should be used if you are storing it for long periods. The cover will push the rounds slightly down so that the ammo doesn't put stress on the feed lips.
@jungleno.
2 жыл бұрын
The dust cover on the PMAGs are a Band-Aid on a problem. Why would you buy magazines with a problem?
@Evopandawithalumpia
2 жыл бұрын
@@jungleno. They dont have a problem and are known to be reliable. I bet you use Hexmag or something.
@jungleno.
2 жыл бұрын
@@Evopandawithalumpia e-lander steel mags.
@2amichaelj
Жыл бұрын
@Sharon Smith not sure how long you can leave them loaded that way without the dust cover. I kinda agree it's a point of failure and needing a dust cover to keep the mags loaded is a bandaid to a problem that should be addressed. I do trust pmags but typically use them for training and range use. I've been slowly moving towards Duramags (steel and aluminum) and Lancers if I'm putting away magazines loaded for long term storage. Magazines aren't expensive but it is an added cost. Magazines are a throw away product too so I had to start training myself to destroy and throw away mag bodies and springs once they've become unreliable. Typically the follower can be saved. If you've purchased dozens of pmags for long term storage that hurts to have to possibly exchange but I'm personally straying away from pmags now for this reason.
@madride858585
Жыл бұрын
@Sharon Smith springs get worn out from use not just being compressed. Storing a loaded mag should be fine to use for years.
@oskar6661
2 ай бұрын
Good video. My old agency issued us ancient aluminum service magazines (to go with our ancient issued M4's and M4A1's...). My first step was immediately ordering Magpul innards (springs, anti-tilt follower, etc.). Juiced them up to decent.
@AJohnSmith
2 жыл бұрын
Couple videos showing that storing them loaded isn’t the issue; it’s constant use; compression and release of tension weaken the springs. 🤙🏻
@bonsaw57
2 жыл бұрын
This. I’d argue it’s common knowledge now
@AJohnSmith
2 жыл бұрын
@@bonsaw57 Too many new owners to assume they know the correct info. Always good to toss em a bone.
@davidschaadt3460
3 ай бұрын
Yes ,I didn't know that until a few years ago. I used to load and unload all the time.
@ACGBLR
2 жыл бұрын
My own order: Magpul Lancer Okay Industries Duramag
@wisemencompany
2 жыл бұрын
Solid.
@pisom4314
2 жыл бұрын
no one mentioned DD 32 round mags!!! i have had great luck out of them on both 556 & 300 BO.... the commits bout the Lancer mags "spitting out ammo" i have never saw personally as a RSO, and we have a lot of people go thru quals!!! the Hexmags i have saw a few with issues... the worst for issues is aluminum mags from everyone.....bent, dented, abused, you name it & they still think they are great!!! i see more Pmags come thru then any other mag tho!!!! thanks for sharing with us... be safe out there
@krazyivan007
4 ай бұрын
P-Mags...freaking awesome, so smooth and I've never had a problem.
@gadgetguy99
2 жыл бұрын
I have mostly duramag speeds then about 10 heavies. Got 3 pmags, a couple hex mag and 1 fab defense to test them out but I like the reassurance of metal over everything else.
@GBGuns
2 жыл бұрын
DuraMags are the way to go, especially if you're running other calibers.
@krispewkrem3
5 ай бұрын
CProducts/DuraMag and Okay are by far my favorite. The rest are dumb. Too many PMAGs like to be sticky in my receiver. Lancer just looks stupid and is too complex and I just don’t trust the aluminum feed lips to stay. Like damn. Make a plastic mag or make a metal mag. The hybrid is goofy. Oh and ETS Group mags are trash. Instagram was pushing em hard. They’re junk.
@KimballPrecision
4 ай бұрын
@@krispewkrem3feedlips on the lancers are hardened steel, and are injection molded around. They’re not going anywhere. With that being said I prefer okay surefeeds.
@CompanyHaze
2 ай бұрын
It's my preference too. DuraMag 😎👌🔥
@sonnygunz9207
Жыл бұрын
Lancer L5 awm, Okay Industries Surefeed e2 & Magpul PMags for me. Back when I started shooting every USGI magazine I scrounged up had the old crappy black GI follower. When we found the slightly less crappy green followers we snatched them up like a winning lotto ticket! Now good reliable mags are everywhere.
@animalmother8117
Жыл бұрын
I’m definitely a mag hoarder. I have enough good quality mags to last a lifetime. New, in the package.
@Kgoutdoor
Жыл бұрын
Why not load them in case? Lasts longer not loaded?
@beardly0121
2 жыл бұрын
Magpul, lancer, dura mag, asc, and surefeeds are all good mags. Lots of people complain about lancers but they work great in my machine.
@HatsuneM1ku01
2 жыл бұрын
D&h > durajunk
@SeanF151
2 жыл бұрын
The okay industries, Lancer mags, and d&h Teflon mags from Palmetto have been best for me. Only metal feed lip
@Firefox13A
2 жыл бұрын
Magpul G2 Windowed is my favorite. I also replaced all aluminum magazine followers with Magpul and they work great. It’s a must and superior to the military’s tan followers.
@BestPetClips1
2 жыл бұрын
I’ve had issues with the Lancers. They don’t cycle with 300 blk either. I’m liking the new DD mags, been 100% reliable. Also had great luck with the Surefeeds. They’re ending production on them though.
@jtcford
Жыл бұрын
Lancer has 300bo mags now
@georgewashington7312
2 жыл бұрын
Definitely love the SS Duramags.
@curgunner
2 жыл бұрын
Surefeeds and PMags are my favorites Suprised by the amount of lancer mag fans. I’ve had a lot of problems with them
@wisemencompany
2 жыл бұрын
Well regardless, you can’t go wrong with surefeed or magpul. Thanks for the feedback.
@tangomantactical
2 жыл бұрын
Lancer zero issues. I have absolutely no clue as to why they are " finicky, won't work right, I hate them ect". They do not sponsor me but me and my shooting crew uses them. I can't even think of an issue. Pmags I have video on thier Glock stick mags, horrendous. I even called the company and talked to a engineer. They sent me out 3 more 27rd Glock stick mags. Still problems- using them in different handguns and AR9's. Mabey it's the area you live in and the weather conditions?. Looks like a large amount of PNW shooters here. I'm in middle Tennessee. We don't have the rain and dampness like the PNW does.
@curgunner
2 жыл бұрын
@@tangomantactical Glock mags are a different story. Always go OEM there for serious use. For AR mags though I haven’t had an issue. With lancers I’ve had a significant amount of double feeds, a few durability issues where they’ve cracked or the feed lips have bent. And also if you drop them while they are full they are almost guaranteed to spit ammo. Should you be dropping your full mags? Obviously not, but it can happen and having them spit half or all your ammo onto the ground is a massive pain in the ass. I haven’t had that issue with Surefeeds and Pmags. Also for what it matters I’ve lived in Colorado and Indiana so either dry or humid and have had issues with lancers in both locations. I have some so I use them for range mags, but never keep any in my serious kit. This is on two different rifles, both have Aero upper receivers and thats about their only commonality.
@Eddycarm
2 жыл бұрын
Lancer mag user here and no problem so far with them 🤷♂️
@tangomantactical
2 жыл бұрын
@@curgunner All your issues with Lancer mags......that's you brother. I've been running them for 2yrs now and about 8K rounds later, flawless. My talents are my sponsor. I don't make 75K a year either. I Cerakote on the side. I gunsmith. I build high level AR's. 21 to date in the last 3yrs......thats my sponsor my talent and my hands. If you got a chub for Pmags I'm not hat'n. There AR mags are ok. There Glock mags are horrific, if your shredding yo trigger. Shot safe brother!
@clloydhi
2 жыл бұрын
D&H, C Products, DSG, Brownells, and Okay/Surefeed have all done well for me for a long time. For polymer, P Mags of course and Hex mags. I have a Hex mag that was loaded for over 5 years....no rounds pop out if you drop it and it worked like a champ during my last shooting session. I got some e Landers last week and will be trying them out. Seems to have a magpul follower or a good copy of it. I have some Troy mags still loaded from 2016..and the rounds re still tight with no pop outs. I had 2 MFT mags, gen1 that the lips failed after being loaded for less than 2 years....pop outs.
@bonsaw57
2 жыл бұрын
5 years isn’t anything bruh. Don’t listen to the “change your mags” crap. Just google the stories
@jungleno.
2 жыл бұрын
E Landers are good steel mags. Made in Israel.
@xnorcal831x
2 жыл бұрын
Put the tops back on the magpul mags it relieves the pressure off the feed lips once loaded. It's why they are included with all mags. 🤯
@OFFICIALUND
2 жыл бұрын
They’re not, though. They have really only come with about 10% of the PMags I have (which is about 200)
@xnorcal831x
2 жыл бұрын
@@OFFICIALUND yes you are correct. All the ones I buy have them. But you can buy them without to save money.
@son_of_guns
2 жыл бұрын
PSA is always running sale on pmags in 5, 10, etc and I guess I'm a mag hoarder, just a little bit behind on keeping them all topped off
@NILGRU
2 жыл бұрын
Thousands of rounds through Hexmags. Not a single problem.
@pisom4314
2 жыл бұрын
im the same way!! RSO here & see alot of shooters come thru training here!! i see more problems with aluminum mags then any others!!
@mattsmash93
4 ай бұрын
I don’t believe you.
@Logan-mr4xg
2 жыл бұрын
On a side note: translucent fde Lancer loaded with some nice shiny brass, smexy
@wisemencompany
2 жыл бұрын
Excellent point.
@pricelessppp
2 жыл бұрын
Imagine a skeletonized mag well with pure translucent mags! 😍
@OFFICIALUND
2 жыл бұрын
I’ll trade you a few I have for any Magpul. I don’t like the lancer FDEs.
@Razor1373
2 жыл бұрын
I’ve had TangoDown mags for years, great poly option
@wisemencompany
2 жыл бұрын
Good to know. Haven’t seen one of those in a long time.
@davidmartin6100
2 жыл бұрын
I have had good use with my Magpul Pmags.
@holdernewtshesrearin5471
3 ай бұрын
Trust my life to: *Lancer AWM L5 *Magpul P-mag gen-2 and gen-3 *ETS *HK steel and aluminum G.I. mags *Okay aluminum G.I. mags with yellow Magpul anti-tilt followers and high quality springs *ProMag RM-30 Roller Mag- theyre excellent believe it or not. The RM-30 is the ONLY ProMag i recommend Training/Target shooting ONLY: *Troy battlemags - theyre good mags but the base plate design SUX! NEVER dissassemble! *Magpul D60 drum- Not reliable. Mag Couplers- *Magpul *SafariLand
@robertallen3031
Жыл бұрын
Like my surefeeds get them while you can. My favorite is still the HK steel roller mags. Expensive but worth it.
@wisemencompany
Жыл бұрын
Worth it for sure.
@racamp4467
2 жыл бұрын
I have been running both the okay industries and lancer mags. No complaints. I do keep some magpul 40 and 20 rounders as well
@racamp4467
Жыл бұрын
Good one bro
@rustyshackleford1877
2 ай бұрын
My pro-mags run great with tula ammo. That's a pretty good quality.okay industries, Magpul and lancer are great too
@jessarellanes6648
3 ай бұрын
You got that right.
@modernrambo2
2 жыл бұрын
One thing I look in addition to your points, is ease to insert on a closed bolt. love magpul gen 3 and gen 2s. I absolutely hate lancers.
@alienspacebones
2 жыл бұрын
So it's not just me then? My Lancers barf rounds when inserted on a closed bolt without fail. Even with only a few rounds them I'm getting 2 or 3 as soon as the bolt moves. Luckily I only have 2 color matched for a goofy theme build and 3 just for SOCOM. Hex mag for my .308 work better than most and I've not had issues with ETS. Rifle mags I should say, their pistol mags suck and have fat base plates that make a magwell a no go. Pure jam-o-matic. ETS rifle has a longer follower than most tupperware pill boxes. Helpful on a lower with a bit of a sloppy bolt catch that misses other plastic mag followers, a few thousandths of wobble is all it takes. I actually mostly use ASC stainless and like them. Easier in and out of anything, rifle or carrier/pouches. I have a few gen 2 Magpul but they have Endo mag inserts for my PCC, but I do like them. I've actually been enjoying KCI a lot as of late, both pistol and rifle mags. Pro mag price and they don't suck. 😜 Edit: To add more to volume 1: ETS rifle issues I'd heard of were bulging/feed lips opening if left loaded for long periods, but any plastic mag can do that. If I'm storing full for any length of time or in high heat it's steel only. I'm no expert by any means, this is just what works for me. To each theirs. 👍
@Brykk
Жыл бұрын
My gen 2 windowed pmag has been max loaded for going on 5 years. I am beginning to notice that it is bulging just slightly and is a slight bit tougher to get into the mag well. It will still go in with a little extra force, but it is bulged nonetheless. Feed lips are still holding well also.
@txgreek3512
Жыл бұрын
Great video, thank you for taking the time to make it. My first choice is Duramag SS with chrome molly springs and Aluminum with SS springs, then Magpul M3 and Lancers.
@CompanyHaze
2 ай бұрын
Old GI metal mags suck. Newer ones good. Keeping mags loaded doesn't compromise springs. I run DuraMags. To each their own. Nice video guy 😎👌🔥
@cameron3525
2 жыл бұрын
Love how you guys throw in a little policy/politics advice-it’s good to know how our decisions affect our freedoms like gun control.
@Ripskiis
4 ай бұрын
D&H make a good one.
@maverickmartinez7776
2 жыл бұрын
Great vid Ben
@Sparks52
6 ай бұрын
Hexmag will feed .300 Blackout with 100% reliability that Pmag will ALWAYS jam in the barrel extension chamber.
@counselingpsychology
2 жыл бұрын
Okay mag base plates seem to bend easy resulting in cutting my palm when banging one into the gun on a closed bolt. It could also be my delicate baby hands.
@wisemencompany
2 жыл бұрын
It happens.
@ProactiveDefenseLLC
2 жыл бұрын
I’m surprised ASC made the list, I’ve seen more negative reviews on the than good
@wisemencompany
2 жыл бұрын
Interesting. I haven’t experienced that.
@digitalsmitty
2 жыл бұрын
Man I took advantage of a sale and bought a bunch of Okay mags but they won’t fall from mag release. I assume my lower must be out of spec but I don’t have that issue with any others. Oh well they just need a tug ;)
@digitalsmitty
2 жыл бұрын
@@literallynobody1515 weapon outfitters had a sale on them a few weeks ago. Figured I’d take advantage on the surefeeds since okay is stopping production on them
@donkeydefense
2 жыл бұрын
Lancer mags are by far my favorite. Especially the purple ones cause I look cool.
@sleigh4019
Жыл бұрын
I guess most ppl are idiots ..the point of springs are made to be compressed so they should be fine loaded for years ..maybe its cause I did have some engineering schooling and kinda one of the first basics you will learn about
@chrischiampo7647
2 жыл бұрын
Dura Mag I Can Say Are Flawless 😀❤️😊❤️
@armon8399
2 жыл бұрын
Not sure if anyone ever compliments on your shooting but u shoot really good bro
@OFFICIALUND
2 жыл бұрын
No homo. Right? Right?
@AlphaChimpEnergy
2 жыл бұрын
I use the 40rnd Pmags for my vehicle and home.
@jakemerica
2 жыл бұрын
Great overview on the mags. Appreciate it.
@wisemencompany
2 жыл бұрын
Happy to help. Thanks for watching.
@donalddicorcia2433
2 жыл бұрын
The only problem I have with Lancer is that they won’t make a mag for my mini 14.
@sirbalanced5486
2 жыл бұрын
How didn’t SureFeed E2’s from Okay Ind make the list ya noob! Although I heard a few weeks back that they’re going out of business?!
@independentRestorationServices
Жыл бұрын
@6:40 look at this guy with all his fancy maths.
@wisemencompany
Жыл бұрын
You know you are the first guy to catch that 😂. I thought for sure someone would of said something by now.
@delav83
9 ай бұрын
ASC has been great magazines for me!
@dfghjkl501
2 жыл бұрын
At 8:11 - which optic mount are you using for your LPVO? I love that top mounted MPS, looks sick
@wisemencompany
2 жыл бұрын
It’s from Reptilia Corp. Solid mount.
@SgtRock-LeatherNuts
2 жыл бұрын
Excellent, thanks for the information ... OOH RAH
@GoshasGuns
Жыл бұрын
Okay/surefeed, they’re discontinued but sometimes you can find em NOS or used.
@joshfiveoh
9 ай бұрын
Wish I had ranges like this where I lived smh
@tangomantactical
2 жыл бұрын
I'm not a huge Hex Mag guy but zero issues for me. 300-500rds a month ( my wallet is my ammo sponsor) Run threw 5 different. 223's I have. Actually Lancer is the mag I would choose over any on this planet. Pmags are good but way overrated.
@dillonharriger369
Жыл бұрын
You drive that rifle really well!! Your reloads are just glass. Any tips for a beginner? Besides the cargo shorts that I'm definitely going out to get a pair of!
@woodsghost9088
11 ай бұрын
Practice it. Develop some context. Go slow. Each movement slowly. As it becomes familiar, go ahead and speed up a little. Then watch some videos on mag changes. Make some changes as needed. Practice the new method(s). Watch videos on mag changes. Make changes as necessary. Practice the new method(s). Repeat.
@secondarytrollaccount666
6 ай бұрын
People dont like Pro mag but i dont use the clear ones so my 30 round mags havent caused a jam yet.
@Cicero1776
2 жыл бұрын
After the recent Bruen Decision, it won't matter what kind of mag, as long as it carries more than 10 rounds, CA gonna suck'em up so hard, Kamala will take notes.
@donalddicorcia2433
2 жыл бұрын
Going to sit back and let our brethren behind the tofu curtain arm up.
@Cicero1776
2 жыл бұрын
@@donalddicorcia2433 Thank you; we are surrounded by clowns.
@timpczman
2 жыл бұрын
@@donalddicorcia2433 yep, still need the Duncan V Bonta case finally ruled in our favor. the 9th circus will take their sweet time.
@Datacorrupter234
Ай бұрын
had major problems with lancer mags
@zach7381
2 жыл бұрын
KZitem celebrity crush 😻
@tuchesuavae
2 жыл бұрын
I only us magpul. I tried 2A mags. I didn't like the neccessary smacknto seat properly.
@johndough7160
2 жыл бұрын
Lancer’s are m favorite mags.
@bruceparker9353
8 ай бұрын
Anybody have any stories or opinions on the milspec 20rd adventure time mags?
@brianunderwood7437
2 жыл бұрын
Okay Industries will cease manufacturing Surefeed magazines at the end of 2022. They also make medical supplies, and they will be concentrating on those. 40+ years of making some of the most reliable AR15 magazines that have ever been made. Okay Industries is looking for a company to buy their magazine manufacturing equipment. Hopefully another company will buy them. If not, this 40+ year tradition will be coming to an end.
@jasonroberts9357
2 ай бұрын
Any thoughts on the rumor that Brownells was the company that bought OK's equipment?
@brianunderwood7437
2 ай бұрын
@@jasonroberts9357-I have not heard anything about that. So, I don’t know.
@brianunderwood7437
2 ай бұрын
@@jasonroberts9357-D and H magazines used to be LaBelle. D and H bought all of LaBelle’s magazine manufacturing equipment. Just so you know.
@tacticalbt1023
6 ай бұрын
I love duramag
@jarhead3038
Жыл бұрын
the best ones are the ones that work
@VB6000.
2 жыл бұрын
How many is enough?
@mikeanderson2152
2 жыл бұрын
I just got my American Tactical AR-15 556. Do you know if they make 10 round magazine?
@edwardwilliam6573
2 жыл бұрын
D&h best value
@TheTyrial86
2 жыл бұрын
Gen 3 magpul mags, incase you need to use m855 a1 in your rifle.
@wisemencompany
2 жыл бұрын
That was stated in the video.
@tdhartman
6 ай бұрын
I can't get past the plate carrier and lesson on double ear-pro...😂 A proper gun shop can sort out a new shooter without a problem or local range with firearms for sale.
@reiniergarcia
8 ай бұрын
Lancer
@tractormanx5954
Жыл бұрын
My choice is OKAY SureFeed
@Gator-357
9 ай бұрын
The best AR mags are AK mags
@sumtingwong7408
2 жыл бұрын
Lancers suck imo. You tap the bottom slightly too hard and the rounds spit out.
@wisemencompany
2 жыл бұрын
Never experienced that.
@johnnyh4666
2 жыл бұрын
Lancer are my go to mags and I still have a metric ton of Magpul I have used since Gen 1’s. Lancer L5AWM are my go to these days. I keep an eye out for sales and by them in bulk. I probably have used every magazine known to man popular to the AR platform but at the end of the day, its a disposable and always were meant to be in my professional opinion. They wear. They bend. They get crushed. (Especially older aluminum style)
@Nuke-China
2 жыл бұрын
How would that be an issue, exactly?
@chatnasty
2 жыл бұрын
I've seen that happen as well.
@chatnasty
2 жыл бұрын
@@Nuke-China if you do a reload and slap the mag to ensure that the mag catch is engaged...can cause a double feed.
@seantbr2019
Жыл бұрын
Government issue tan follower hands down best mags
@cheeto4240
Жыл бұрын
no okay surefeeds?
@mattwernecke2342
9 ай бұрын
ATI schmeisser 60rd?
@Juliankb39
Жыл бұрын
I avoid gen 2 p mags like the plague and the 3s are just average. Carbon hexmag, lancer, and ETS are far better IMO, especially since the gunmagwarehouse ETS exclusive is 7.50, holds 31 and seats easily on a closed bolt with a gentle push. Honorable mention to Thril pmx, may become my new favorite if it keeps performing the way it does.
@christophervanwhy6662
Жыл бұрын
Surefeed?
@Warlock-ke2sw
Ай бұрын
I just bought a hera arms H3 lmao. Does anyone have any experience with one?
@edgaresquivel2147
2 жыл бұрын
What do you guys think about Amend 2 mags?
@wisemencompany
2 жыл бұрын
No experience
@clloydhi
2 жыл бұрын
I have a couple but not enough rounds thru them to make a call....but no failures after a few hundred and loaded for 2 years. Yeah, I label my loaded mags just because.
@chrisc.3472
2 жыл бұрын
10+10+10=30 quick maths
@abolishtheatfandrepealthenfa
Жыл бұрын
Add Troy mags to that list of DO NOT BUY
@carlkleynhans3864
Жыл бұрын
Daniel Defence … I use Magpul and Dura Mag will give Lancer a go
@trev5287
2 жыл бұрын
Keep that mag off the deck
@JEJAK5396
2 жыл бұрын
😂
@fishrrelaxing9361
Жыл бұрын
🤦♂️ no one ever talks about IWI steel mags which imop are the best ar mag period
@richardturk7162
5 ай бұрын
Why do we have to watch video of you playing big time operator? No reason to try and impress anyone. GI mags and Lancer have proved themselves to me and magpul have let me down a number of times so I wouldn't have them in my load out. I do agree about inspecting your mags and make sure they are good to go.
@navrhy3075
2 жыл бұрын
ETS MAGS are awesome bro wtf???
@Akhazmat907
2 жыл бұрын
Anything that's not an AR15.
@Gh0st_____
2 жыл бұрын
Ayooo
@chikafreak
2 жыл бұрын
What chest rig with a Molle harness is that?
@wisemencompany
2 жыл бұрын
HX Harness sold on our website
@chikafreak
2 жыл бұрын
@@wisemencompany what's the chest rig? 😏
@wisemencompany
2 жыл бұрын
@@chikafreak bunch of parts and pieces. Center is a micro fight.
@krispewkrem3
5 ай бұрын
Just gonna share some terribly unreliable mags: ETS Group. Just garbage. And Magpul PMAG, not exactly unreliable, but I’ve had many that like to just get stuck in my magwell. Not an issue for a loaded mag. But empty mags don’t always drop out free. Big issue? No. I just prefer CProducts mags. They’re like $10-11/piece and they’re sexy and they’re reliable.
@waterhead1359
2 жыл бұрын
7:45 he looks and watches the round chambered but then thinks I should do a press check for no reason. Difference between checking the chamber of a gun before you go out As opposed to checking everytime you chamber a round when at the range .
@wisemencompany
2 жыл бұрын
I didn’t, “think I should do a press check for no reason”. I had a very good reason and after I press checked nothing bad happened.
@waterhead1359
2 жыл бұрын
@@wisemencompany it's a bad habit to have but you're in Florida so I give up and say I'm wrong . I enjoyed the video on your friends cz p07 .
@n8spL8
Жыл бұрын
ASC is garbage in 308
@huntgmx2561
Жыл бұрын
AR-15 mags I don't recommend: A. Mako Tactical Steel. Was sticky in insertion and extraction from my AR. Gave to ally. B. PMAGS. Flunked Tire Irons Tests. Gave to ally. C HERA. : Has tiny part that can be lost, potentially rendering the mag inoperable. D. USA and PROMAG. Two disasters you should at all costs. E. Aluminum mags: not sturdy enough.
@huntgmx2561
Жыл бұрын
Three AR-15 mags I recommend: ASC stainless steel. Function flawlessly in my AR with regards to isertion, feeding, and removal. B. Hex mag S2. Same experience but with tool free disassembly and reassembly also. C. Lancers with metal feed lips. Pure awesomeness per Tire Iron's tests.
@huntgmx2561
Жыл бұрын
Magazines I'd like to encounter : A. CPD SS Mag. B. Thril PMX MAG. C. Amend 2 mags. D. Okay mags. E. Surefire,. F. MFT Gen 3 G. CMMG MAGS.. Does any know of any more magazine brrands of my consideration? Thank you in advance.
@AvidShooter
Ай бұрын
asc mags are terrible
@larrymarsico4059
2 жыл бұрын
🤙🏻👊🏻💪🏻🇺🇲
@oldmcdonald5788
Жыл бұрын
I mean. I get that you're fishing for a sponsorship. But Magpul mags are mediocre on their best day. Lmao!
@mghegotagun
9 ай бұрын
Drops free, clicks in easy, vetted by the military for its superior feeding performance over lancers and gi mags after insane round counts. Thats not mediocre.
Пікірлер: 211