few hundred years back: I am going to make a paper printer to print books faster 2019: I am going to print a Rocket
@myusername6622
5 жыл бұрын
Hussein masri Not even close to a hundred years back
@RealTrueguy64
5 жыл бұрын
😂
@lilplum37
5 жыл бұрын
@@myusername6622 it started back in 15th century
@TrickWithAKnife
5 жыл бұрын
Next will be affordable printed food, and following that, personalized biologically compatible organs for transplants.
@husseinmasri901
5 жыл бұрын
Elon Musk: I am going to print mars
@robtheprocrastinator1197
4 жыл бұрын
Them: Printing a rocket in 60 days Me: Takes 60 days to clean room
@neo-babylon7872
3 жыл бұрын
I took a year to call about a bill. Talk about relativity.
@osnaldov
3 жыл бұрын
Your problem is that you don’t have a printer
@aaron4820
5 жыл бұрын
6:25 this company invented anti gravity technology but decided to apply it as a chair, seems like a massive oversight when your business makes rockets.
@BESTofAlp
4 жыл бұрын
He has strong legs
@Guthix198
3 жыл бұрын
Magical humans confirmed
@elijahhmarshall
3 жыл бұрын
Underrated comment
@owenhorn7548
3 жыл бұрын
lmao
@JustGotHeated
5 жыл бұрын
1970s office: Damn, it the paper printer is jammed. 2019: Damn it, the rocket printer is jammed.
@VentDeux
4 жыл бұрын
Printers in the 70s.........................Hhhhmmm.....explain this to me. In my mind mainstream consumers were using type writers in the 70s and The personal computer wasnt around until the 80s. I wouldnt know , i was born 89.
@VentDeux
3 жыл бұрын
@XXassassinXPR STFU. Jokes are based on reality.
@VentDeux
3 жыл бұрын
@XXassassinXPR Did you know Jesus owned a Chrysler . Imagine that. Jesus Chrysler
@VentDeux
3 жыл бұрын
@XXassassinXPR Edison would have signed the Declaration of Independence , but he didnt have adobe installed on his phone.
@VentDeux
3 жыл бұрын
@XXassassinXPR Winston Churchill used to play Hitler in Call Of Duty .
@Master_Therion
5 жыл бұрын
2:50 Yeah, we all know Fluid Dynamics is tricky, but come on. It's not rocket science... oh wait.
@ApeX-pj4mq
5 жыл бұрын
Your all over the damn place
@Ethorbit
5 жыл бұрын
@@ApeX-pj4mq never even heard of him
@hyderhydra3269
5 жыл бұрын
guy makes 100,000K a yr to guess if a 1.5inch hole is better then 1inch hole in a computer simulation YET the car mechanic is doing the exact same thing with exists RUNNING vehicles makes pennies in comparison seems legit...................
@mahdimessai9586
5 жыл бұрын
@@hyderhydra3269 that's not all what he does dumbfuck
@VerisimilitudeDude
5 жыл бұрын
@@hyderhydra3269 You'd be surprised at how much some mechanics make. With certification and years of experience, they can make more than $25/hr.
@kallistiX1
5 жыл бұрын
Sometimes I feel like we are in a race: if we can survive our own destructive behaviors just a *_BIT_* longer, the future will be off the charts amazing.
@kiwi4998
5 жыл бұрын
kallistiX1 the new motto of all humanity
@Baldoxxx4000
5 жыл бұрын
because religion was created, if they cease to exist then the future is bright
@OspreyKnight
5 жыл бұрын
Despite what the media says, there has been no time in human history where so few people have been effected by crime, war, and poverty world wide. We are currently living in an unprecedented golden age. Seriously, more people die in car accidents each year then in all the wars and conflicts going on right now by hundreds of thousands. in 2016 the estimated body count of all wars that year was 87,432. World wide 1.25 million people die each year in car accidents and a further 20 to 50 million are injured. Then consider that ONLY 87,432 people died due to war out of 8 Billion people. Less then a percent of our global population is directly effected by war. Crime has been on the down trend globally for 20 years and in the US is lower then it has been since the 1960s. In 1990 36% of the world lived on less then $1.90 a day, as of 2015 that is down to 10%. 1.1 billion people, an eighth of the world's population has risen out of extreme poverty. Down from 70% in 1900, which itself was down from the world bank's first estimate in 1820 which was 84%. Humans are programmed to look for threats in our environment and the media inherently uses that basic instinct to gain viewership. Take that into account when you worry about our "destructive behavior". The danger is real, but not likely.
@kallistiX1
5 жыл бұрын
@@OspreyKnight Agreed. However, all the prosperity comes with a cost to our environment that isn't being addressed despite some pretty clear and ominous warnings. From climate change to issues with fresh water, fertility, the resistance to antibiotics - even while some are opening the door for long eradicated dieases to return - the hard earned peace is in peril.
@OspreyKnight
5 жыл бұрын
@@kallistiX1 100% agree. We have the technology needed to get ourselves off fossil fuel entirely without changing our infrastructure, biofuels are simply slightly more expensive. Hell, Brazil converted to ethanol fuel in the 70s. In big part climate change is hampered by over the horizon technologies being pushed in lue of practical solutions available now in order to get money. Diseases don't surprise me. They've been in the same biological arms race as we have and most people are getting vaccinated which means as a whole our immune systems is on average stronger then our ancestors. Doesn't mean everyone will survive, but I doubt we will have any massive plagues. Even with China dumping antibiotics into their animal feed like there are no consequences. Also, there are alternatives to antibiotics. The west focused on chemical treatments but the soviets focused their research on Biologics which are far more adaptable, we're getting their research now and catching up quite quickly. And because of Anti-vaxxers the conversation about vaccines is back in the forefront and most places are now making it mandatory. Not ideal from a personal rights perspective, but sometimes the greater good is simply that much better. As for our water supply... yeah that is a problem I don't have an ethical solution for.
@Hickman-qd4qo
5 жыл бұрын
The 2020's are going to be a great year for space, rockets, and colonization. I'm ready and hope its going to work out well. I posted this a year ago, it didn’t age well
@SECRETGOVERMENT2012
5 жыл бұрын
Lol 2020 is next year 2025 to 2029 is going to be crazy building bases on the moon sending humans to Mars and so on
@my3dviews
5 жыл бұрын
I wouldn't bet on it. There may be a few flights to the moon and back and maybe an orbital flight to Mars, but colonization won't happen. They have a hard enough time keeping everything running properly in the ISS which is in low Earth orbit. Any problem and they can return to Earth within hours. Any problem to or from or on Mars and they are doomed, as it would take months or even years to return. A problem like Apollo 13 on the way to Mars would have meant death for the astronauts.
@-Burb
5 жыл бұрын
My3dviews NASA is going to the moon in the next 5 years. They’ve already officially said that. I’m surprised it didn’t make more headlines TBH. I think they’re trying to stay as well(at least for a little bit) to test things for going to mars.
@my3dviews
5 жыл бұрын
@@-Burb Sure, going to the moon is doable, as it has been done several times already during Apollo. But going to Mars is exponentially more difficult. The moon is in Earth orbit. Mars is in its own orbit around the Sun and only aligns with Earth once every two years. Even landing unmanned probes has had only limited success. Several spacecraft have been lost, many burning up when entering the atmosphere. But, getting there is the relatively easy part. Nothing has ever returned from Mars. Not even a simple probe with a sample of the surface. That should have been done long ago. Making a jump from only sending one way unmanned probes to manned flights that need a method of returning is a huge jump in technology that isn't available yet. You need to land a lander with the ability to return to Mars' orbit. Then join up with a return vehicle that can get out of Mars' orbit and get back to Earth's orbit all on schedule. Missing the return window, means staying another two years. What does NASA have to go to the moon? Just a capsule that is similar but larger than the command module of Apollo. They still have no lander. Going to Mars in that capsule would be ridiculous. It's one thing to do a week or two trip in it with four people, but doing a multi-year trip in it, won't happen. They would need something like the ISS to live in for that period of time, not a small capsule.
@-Burb
5 жыл бұрын
My3dviews I don’t think they’re coming back... People signed up to go there but not have any promises coming back.
@sadface
4 жыл бұрын
"We have a patent" The open source community: "I am meant to be impressed?"
@maksimmuruev423
4 жыл бұрын
well they use Shindows.. so patents still matter)
@fofopads4450
3 жыл бұрын
This is just a challenge for the next prusa machines
@chuanyh0n
5 жыл бұрын
So it's a Kerbal Space Program builder on a whole new level. Edit : thanks for the likes!
@HelipOfficial
5 жыл бұрын
😂
@blendernoob8993
5 жыл бұрын
Haha
@ne1cup
5 жыл бұрын
engineers and their toys...
@Nemo7The7Pirate7
5 жыл бұрын
my thoughts when i saw some mundane nerd 3d modeling something that could take a man to heavens.
@theofilleul6866
5 жыл бұрын
My ksp is still lagging the moment i have +1000 parts, can’t imagine how nasa’s pc handle rocket of 100000 parts...
@philosophilia3563
5 жыл бұрын
_"an internal configuration could take up to three thousand parts, when we can make them not only in three parts, but print those only in nine days"_ NOW THAT is something!
@stiimuli
5 жыл бұрын
I love that they named it Stargate and put a giant Protoss symbol on the wall of the room 0:12 For those that don't know, in Starcraft a stargate is a Protoss building that produces flying units (space ships)
@monkeylordofdoom14
5 жыл бұрын
I was so stoked to see that lol "My life for auir!" Tassadadar would approve of this
@monkeylordofdoom14
5 жыл бұрын
I also thought they should have named it sg1
@gabor6259
5 жыл бұрын
They should have named it Jack O'Neill.
@stiimuli
5 жыл бұрын
@@monkeylordofdoom14 My wife for hire!
@ne1cup
5 жыл бұрын
dooh , an automated facility for making flying ships? that is like an upgrade?
@Ali107
5 жыл бұрын
Elon Musk: *I'LL TAKE YOUR ENTIRE STOCK!*
@MidnightBloomDev
5 жыл бұрын
Nah, SpaceX has the best rocket in the world
@albierodriguez9797
5 жыл бұрын
( ͡° ͜ʖ ͡°) that is true but Elon is always looking for ways to increase productivity and decrease costs of production and this is what relativity is essentially doing!
@paulround8501
4 жыл бұрын
SpaceX already 3D print a lot of components for their rocket engines. They also make some of the most advanced engines currently available and make them much faster than this so I'm guessing this looks like nothing more than an interesting tech demo to them.
@mr.nicolas4367
4 жыл бұрын
@@paulround8501 people said the same about SpaceX.....
@paulround8501
4 жыл бұрын
@@mr.nicolas4367 My argument is, it's already being done, better by other companies. There is nothing world leading or even clever about this approach and additive fabrication is not the best approach either for many parts of an engine due to limitations on materials and inherent properties of printed metals.
@Allahuma.sali.ala.muhammad.
5 жыл бұрын
Not surprised one bit. I've been waiting to see someone take advantage of 3d printing technology and put it into use in different fields.
@w8stral
5 жыл бұрын
Best part of 3d printing and fluid dynamics is you can easily vary the diameter for flow control.
@Shark-kawaii104
5 жыл бұрын
It is gonna be replaced by smart dust
@tommarius745
5 жыл бұрын
@@Shark-kawaii104 When?
@criticalthinkingalways3378
5 жыл бұрын
Same the applications now are endless... i played a game "titanfall2" where they had and entire planet 3d printing entire cities and landscapes...
@ghostwolf117
5 жыл бұрын
They are testing it in the firearms industry
@dagg497
5 жыл бұрын
As an engineer with some basic Metallurgy and die cast courses I have to say.. 3D printing anything with demands on strength will never take off. The problem with extusion/die cast/sintering are all the same since you heat materials and much much worse with metal printing since you are basically welding every layer. You get huge warm/cold differences in the material not to mention the volume difference of hot and cold materials. As such every 3D print made; would basically have to be put in an oven at around 800-1200C to undergo de-tension hardening and even at that you would get unsatisfying metal cristalization = weaker material and un-homogen micro structure.
@sebassanchezc-1379
5 жыл бұрын
Exactly. By now are just raw clay rockets. 🤔
@ariesmarz18
5 жыл бұрын
the thing is they made preservatives techniques to metal to weld it well...
@Telencephelon
5 жыл бұрын
That is why your pessimistic understanding is as you put it basic, and why you should give some credit to science, scientists and those being optimistic. Metallurgy is far easier than electrochemistry, yet they share a lot in common. What they don't share is the constant in-/e-flux of energy, and rather spongy and flexible lattice in the latter. Neither of us get's to play the pessimistic self-proclaimed expert, besides having "officially" studied. Guess what. No one cares. Either take the hard road and contribute something to science or calm down.
@AnythingMike
3 жыл бұрын
You are wrong.. SpaceX used 3D rocket boosters .
@dropsnooze5274
3 жыл бұрын
It doesn't matter if cast steel is stronger. The only thing that matters is, if the printed part is strong enough for its task and if its economical
@Zalorne
5 жыл бұрын
lol the Protoss logo on the room, real nerds here
@Ukitake13thDivision
5 жыл бұрын
Noticed that as well! :D
@YoungAsznee
5 жыл бұрын
Real nerds that worked at NASA and SpaceX.. I wish i would be that successful, but that ain't happenin. Watchin this really hurts me, idk why.
@gj9157
5 жыл бұрын
@@YoungAsznee Most people aren't that smart, let alone it's a stressful job.
@gj9157
5 жыл бұрын
@Howdy Justice I'm talking about rocket engineering.
@ap7k533
5 жыл бұрын
Trueskeptic it’s not all about being smart. You have to be dedicated and like it.
@shawnvang4216
5 жыл бұрын
2:03 holy crap Windows XP in 2019
@directorscut4707
5 жыл бұрын
I'm sure it's just a skin :-3
@xXSgtJackXx
4 жыл бұрын
Ofcourse a engineer would use windows xp, its the version with the most compatibility with programs and probably the most stable and that has no auto updates
@artifexrex1578
4 жыл бұрын
Or it’s stock footage...lol
@lookieeight1006
4 жыл бұрын
@@xXSgtJackXx good luck using solidworks 2020 on XP
@Johansen1000
3 жыл бұрын
A PC that is still running XP, yeah that thing is so old it's going to be less powerful than a modern iPhone
@killer30556
5 жыл бұрын
That machine must require a hefty amount of pylons.
@stiimuli
5 жыл бұрын
just 1 pylon but tons of minerals and gas
@Toastmaster_5000
5 жыл бұрын
@@stiimuli literally lol
@TheMusicalStylingsofBrentBunn
5 жыл бұрын
We must construct additional pylons.
@SeanKula
5 жыл бұрын
You've not enough minerals.
@Khim_0129
5 жыл бұрын
Satisfactory?
@Adrenaline_chaser
4 жыл бұрын
I know it has nothing to do with the video's topic but still: The guy at 2:35 has such a soothing voice!! It's so pleasing😍😘
@someonelucas2688
5 жыл бұрын
That Idea is nice and all, but PLEASE use metric... EDIT: holy shit I started a war
@MsJoao101
5 жыл бұрын
That's why that thing will fail... Maybe... kkkkkkkkkkkkkk
@PianoMavs
5 жыл бұрын
There are those who use the metric system and then there is the country that landed on the moon.
@w8stral
5 жыл бұрын
And the Meter is a stupid measurement for engineering. If the meter were half its size, then we would have a useful measurement system. What is humorous is that if the French actually had succeeded by changing Time to 100s to a minute and either 10 minutes to the hour or 100 minutes to the hour and 10 or 20 hours to a day, then the meter would have been about half of its size it is today. But because of the STUPID base 60 time system and the STUPID base 60 angular system.... oh wait, they are not stupid in the era of hand calculation due to its easy fraction/prime number shortcuts. Only in the computer era is base 60 stupid.
@Numeriwar
5 жыл бұрын
Life is easier with metrics
@TrickWithAKnife
5 жыл бұрын
There are examples of catastrophic failure of rockets due to miscalculations between metric and that barbaric system America still uses.
@moskva-kassiopeya
5 жыл бұрын
They made it look so simple yet it's freaking rocket science. I have no idea how smart these guys is.
@m.d8537
5 жыл бұрын
7:07 This close footage is amazing
@TheMadMinion
5 жыл бұрын
Yes! The camera shake adds the right dramatic effect to it!!
@cookie-chan3960
5 жыл бұрын
yeah it's my favorite part of the video
@luisotaviomc
5 жыл бұрын
Basically using a CNC mig welder... Don´t think this is meallurgically sound...
@nicksalvatore5717
4 жыл бұрын
I have come from the future. Rocketlab have successfully launched their 3D printed engines along with their carbon fiber body into orbit, delivering payloads.
@bazookaace
4 жыл бұрын
@@nicksalvatore5717 thank you, future man.
@spacedoge3508
4 жыл бұрын
@@nicksalvatore5717 They use e-bam technology. This uses wire edm. The two are very different.
@nicksalvatore5717
4 жыл бұрын
@@spacedoge3508 ah, I see. Don't trust your time travellers, kids!
@kokos742
4 жыл бұрын
exactly. There also just has to be a ton of micro boubles and non-homogenous layers. Overal strength has to be significantly lower than milling solid metal
@gavinhelgeson2880
5 жыл бұрын
So far.. they can make large soda cans👍
@Finallybianca
5 жыл бұрын
Gavin Helgeson pretty much yeah thin walled aluminum pressure vessels.
@stephenbachman132
5 жыл бұрын
Well he said it can make 9 foot stuff. So 9 foot can.
@DheerajBhaskar
5 жыл бұрын
I think 9ft diameter by 15ft in height
@craigcorson3036
5 жыл бұрын
Did we watch the same video? They showed one of their rocket engines under test. It's a bit more complicated than a soda can. By the way - I have family by the name Helgeson. Are you or others in your family from Minnesota?
@ne1cup
5 жыл бұрын
making pressure vessels is just for practice, why 3D print stock items , now that engine that is impressive..
@Evercreeper
5 жыл бұрын
this sounds cool but i just imagine the whole rocket ship uncoiling into one heaping mess of wire because of the heat lol
@MrVocsok
4 жыл бұрын
That cannot happen because the wire is melted in the printing process.
@dhirendramaharaj9407
4 жыл бұрын
🤣🤣 you kill me 👌🍺
@letterslayer7814
4 жыл бұрын
this looks like a mig gun strapped to a fancy robot arm lmao what
@theprofound9182
4 жыл бұрын
Imagine you know better than those guys who spent their lives on that research. Big lol
@Evercreeper
4 жыл бұрын
@@MrVocsok i m a g i n e
@pierreuntel1970
5 жыл бұрын
why did you censored the tip? welding tips are demonitized on youtube now?
@kyanhluong
5 жыл бұрын
So people can't reverse-engineer their custom printing tip from their video
@iagree4686
5 жыл бұрын
Maybe it contains some super sekrit printing technique there
@Unichab001
5 жыл бұрын
Same question why?
@HexaSquirrel
5 жыл бұрын
NDA. Proprietary info.
@MsJoao101
5 жыл бұрын
Maybe it's a commercial trade secret...
@asaxander740
5 жыл бұрын
As a welder I find it hilarious that they are using a MIG welder to 3-D Print Rocket parts.
@stephenbachman132
5 жыл бұрын
I see how this works. Its a mig welder thats attached to a cnc machine. Very clever.
@Indeterminite
5 жыл бұрын
@Luke George, actually I think it's MIG, MIG uses continuous wire, TIG uses long rods.
@stephenbachman132
5 жыл бұрын
@@Indeterminite yep use to do a welding job. Definetly mig. The argon gas is a dead give away.
@drew3186
5 жыл бұрын
Loser tech certified welders lmao
@sammyspaniel6054
5 жыл бұрын
There's a lot to geek out about through this entire video.
@tw06le1
5 жыл бұрын
Hope to 3D print my car one day.
@rahbaralhaq
5 жыл бұрын
Already happened.
@RocksmithPdl
5 жыл бұрын
Rahbar Al Haq when what where
@twogamer7149
Жыл бұрын
I came here after the Relativity Space launch on March 22, 2023. It is a successful proof of concept of this 3D printing approach. The launch put a lot of debates to rest.
@08wolfeyes
5 жыл бұрын
Although a good idea i wonder what inconsistencies get produced at the same time when making such things? It's very important that these materials hold up for a very long time and with many different pressures, weathering etc.
@JonasViatte
3 жыл бұрын
They had me until they started to talk about feet and lbs. Are they baking cupcakes out making rockets?
@raz0229
5 жыл бұрын
_Its been a while!_ _Feels great to be a part of family again!_
@carloscarlos-cr9il
5 жыл бұрын
Damn Seeker is the only channel that doesn’t hold back on Sundays
@jayanand2507
5 жыл бұрын
Please make video on how close are we to build Iron-man arc reactor
@hai-duynguyen8429
3 жыл бұрын
Here back again after Veritasium. Makes watching this video again so much more worth it.
@nick2902
5 жыл бұрын
Outstanding!!! Ramp it up, or better yet, crank it all the way! Let’s get this party started! I can’t wait to see where this goes ten to fifty years out from now! So exciting, to see the development of such powerful technologies evolve!
@johnnyfavorite1194
5 жыл бұрын
3D Printing *(Stereolithography)* has been part of the mass production manufacturing process for over 40 Years now. While naturally the technology continues to be refined, the genuinely new aspect of 3D printing is the availability of machines built specifically for the home market.
@straylgk5497
5 жыл бұрын
MIG welder = 3D printer
@funny-video-YouTube-channel
5 жыл бұрын
*Amazing rocket factory.* If they can make a good rocket ship in there, then we can imagine that similar factories could make anything less complicated. This is the first wave of democratization in the manufacturing, where the size of the business is not important for the complexity of the product, because 3D printing removes the capital requirement for complex products.
@henhen7890
4 жыл бұрын
1:55 - Is this guy seriously lifting his visor to look at the weld happening??
@bad71hd
3 жыл бұрын
I worked at Zenith sintered products in Milwaukee, and we were doing the same thing with direct Focus lasers. Using proprietary powdered metals to form solid objects in printed form that would take months to manufacture that we could create in days
@TheDarkserpent
5 жыл бұрын
Go to the moon and print a base there.
@gj9157
5 жыл бұрын
Print a chic fil-A on the moon.
@potatoz4u382
5 жыл бұрын
@@gj9157 first priorities.
@mpetersen6
5 жыл бұрын
That's already been proposed
@alphagt62
5 жыл бұрын
I saw a machine, in another KZitem video, that 3D printed houses. It pumped out concrete and spun around in a circle. Making an igloo shaped house! They chopped the windows and doors in while it was still soft. Something similar may be perfect for the Moon?
@potatoz4u382
5 жыл бұрын
I LOVE TO EAT BOOOGERS MAN THEY ARE DELICIOUS :)
@tired2sleep
5 жыл бұрын
they actually have a Protoss decal from StarCraft2 in their factory... @0:13 and 5:09 thats awesome. (Stargate is the Protoss building that produces air units)
@mercerwing1458
5 жыл бұрын
Things are really starting to take off. (no pun intended)
@Jeremy-lh3lg
5 жыл бұрын
Mercer Wing -That was totally intended =_=
@Rouverius
5 жыл бұрын
Owning a 3D Printer, I'm chuckling to see the B-roll of the guy making sure the first layers are going well.
@MsJoao101
5 жыл бұрын
It will not be long... Food replicators star trek style are coming your way soon...
@Tallacus
5 жыл бұрын
They already exist look up Natural Machines
@sonyabadass
4 жыл бұрын
2019: Print a rocket 2119: Print a Dyson Sphere 3019: Print a human brain
@sonyabadass
4 жыл бұрын
@Aarav Parikh dude..... Everybody know
@LetoZeth
5 жыл бұрын
Now send the printer up into space, so we can begin building some real space ships.
@linecraftman3907
4 жыл бұрын
ISS has a 3d printer
@JopsYT
4 жыл бұрын
@@linecraftman3907 A small one though
@obe22099
3 жыл бұрын
I'm glad they are doing it, it's a bit early for this tech but it's nice to see them and channels to promote this tech. Until recently it was patented now it's public domain. Any public exposure to this will make the practical use of this and the price to be accessible to more engineers and tinkerers much sooner versus later.
@rm9308
5 жыл бұрын
Just waiting for the day someone yells, "It's a Gundam!"
@jadelouisetidman7400
5 жыл бұрын
With a scaling feature this will make it incredibly easy for just anyone to create actual, efficient missiles. A lot of the biggest technologies have come from trying to create destructive tools, a lot of the most destructive tools have been inadvertently created from trying to progress technology. The atom bomb from ideas of self sustained energy attempts is a good example.
@MsJoao101
5 жыл бұрын
Cool stuff this... I wish my dad and grand dad where alive to see this... Oh boy!!!
@machy8515
5 жыл бұрын
Joao Baptista I wish just my grandad was alive to see this :/.
@machy8515
5 жыл бұрын
F
@user-Void-Star
4 жыл бұрын
Don't worry your granddad is already born into this world but I hope he won't end up in your dinner table as a chicken tandoori 😂
@owenherlihy
4 жыл бұрын
“One of the things that makes our tanks special is our ability to 3d print them.” That’s the only thing that makes them special.
@raulmcgangbang6890
5 жыл бұрын
Yang 2020. The spaceships are starting to build themselves.
@gianni.santi.
4 жыл бұрын
Bring back Yang.
@viralmehta2542
3 жыл бұрын
Wow! That mech engineer was so young and experienced at the same time. Simply awesome!
@mr.personhumanson6871
5 жыл бұрын
They're basically welding metal powder/filaments together into a rocket. I wonder if you can turn a MIG welding machine into a 3d printer
@carlchamberland
5 жыл бұрын
Actually yes ! If you set the feed and speed correctly you could use a cnc table and fix a mig to it.
@MsJoao101
5 жыл бұрын
There's an idea... How difficult can it be? I mean its the same principle... Got to check that one out.
@Spirit532
5 жыл бұрын
This is MIG on a KUKA bot with some machine vision to keep tolerances. That's all it is. Look at their patent.
@MsJoao101
5 жыл бұрын
@@Spirit532 i Know KUKA bot arms used to work with them, they'r not so hard...
@Spirit532
5 жыл бұрын
@@MsJoao101 I have one! They're quite complicated :)
@noahmcelwey2598
5 жыл бұрын
It looks like a mig welder on a robotic arm, I've had this idea for awhile, but idea and execution are two different things, massive props to these guys for getting it working.
@Flyer10254
5 жыл бұрын
Now this is the cool nerdy content I subscribed to Seeker for. Good stuff dudes, make moar! :P
@DS-uo1zy
4 жыл бұрын
Protoss yeeey
@SimplySpace
5 жыл бұрын
This is super cool. It seems there's a lot of people getting into the sat launch market now, SpaceX and Rocket Lab have early leads but they'll have to keep pushing if they want to hold them.
@teohhanhui
5 жыл бұрын
Rocket Lab also uses 3D printing for their engines.
@BLACKLIGHT_NL
5 жыл бұрын
Cool video guys, but can you tell your editors to go easy on that image stabilization? Better steady film or invest in a camera stabilizer ;)
@ItachiUchiha-nx2sw
5 жыл бұрын
All I saw being printed was large soda vessels.
@GhostGuy764
5 жыл бұрын
@Chris' Fish Tanks pretty sure those weren't 3D printed engines.
@GhostGuy764
5 жыл бұрын
They are printing fuel tanks. So it looks like soda cans.
@icykarma2122
5 жыл бұрын
@@GhostGuy764 They were 3D printed in 3 different pieces
@GunnarWilkerson
5 жыл бұрын
@@GhostGuy764 Did you, like, actually watch, or just skim through the video with volume turned off?
@PullingEnterprises
5 жыл бұрын
Splendid. This will be how all rocket companies make rockets in the future
@hobosorcerer
5 жыл бұрын
I can see some eccentric artist using the manual controls for the 3D metal printer to create intricate metal sculptures or something.
@stevejessemey8428
5 жыл бұрын
I absolutely love this. Advancements in new Technologies always excites me . Wishing you guys a fantastic future ahead.
@archlizard399
5 жыл бұрын
Can it 3D print a girlfriend?
@johnnybgoodeish
5 жыл бұрын
Yes, but you still have to file off her rough edges! :)
@relikvija
5 жыл бұрын
ArchLizard 4ameatrocket
@user-yp5sk9ky7m
5 жыл бұрын
ArchLizard *sigh* I wish.....I wish....
@cantho11
5 жыл бұрын
ArchLizard a talking one? No thx.
@lasarith2
5 жыл бұрын
ArchLizard probably cost more then the real dolls
@sailormemes3338
5 жыл бұрын
4:05 "we're able to 3d print them in one piece which gives us kind of like good confidence in our ability to be completely leak proof" I'm not sure I agree with that... is this not like many many welds? Even though they're computer automated... not sure how much I would trust thousands of welds to be leak tight.
@andrewroden9573
5 жыл бұрын
......and they're looking for astronaut Guinea pigs,any takers? 😂
@MrGeoffrey1998
3 жыл бұрын
I'm worried about layer adhesion.. like yeah they can make it but you must have a way to "bake" it so layers are much better held together.. or just vertical printing.
@husnainanwaar1992
5 жыл бұрын
One Step Closer To a Type 1 Civilization
@KiranAlokkan
5 жыл бұрын
Only few 100s of years to go when we can achieve Type 1 civilization.
@nicksalvatore5717
4 жыл бұрын
Alexander Markland Agreed. Maybe there are civilizations out there that follow that pattern but as far as Earth, we were bogged down innovation wise by politics.
@KillerBill1953
4 жыл бұрын
I believe the future of 3D printing will give us something similar to the Star Trek replicator although I would expect a range of printers to be necessary for different items. For example, food printers would not print metal parts, partly because of possible contamination. They will be needed for Martian or Lunar colonies using on the spot materials to produce parts instead of carrying them up the well form Earth.
@hornetluca
5 жыл бұрын
It's a welding machine
@dagg497
5 жыл бұрын
Basically yes. And we all now woulding puts huge stress on materials and risk getting brittle... So this is not gonna take off.. Maybe If you put the 3D print in an oven at 1200C afterwards to get better micros stucture and loose material tension that built up from hot/cold stress.
@chriss2295
5 жыл бұрын
A laser welder
@nicksalvatore5717
4 жыл бұрын
daghrb6 I have come from the future. It has successfully launched into space.
@nani5987
5 жыл бұрын
Problem with this 3d printing is that the finishing would be rough and some complex structures could not be finished properly.....
@lambda9626
5 жыл бұрын
What kind of cycle is the engine using?
@prateekgupta5945
5 жыл бұрын
I guess we'll have to wait for Scott Manley's take on this to know about that.
@kunalbhatia9547
5 жыл бұрын
Open expander cycle
@overnoob9817
5 жыл бұрын
Thanks to let us know how science and engineering shaped the world in very interesting way. These documentaries are far more useful +entertaining, unlike useless movies. I left watching movies as i was getting deeper into science. Thanks a lot!
@MrBLAA
5 жыл бұрын
Tooling I get; but to “print” things that require a massive pressure/temp curve.... hell, scratch that... good luck on your UT tests😂 Good PR though
@2MeterLP
5 жыл бұрын
7:06 looks like it works.
@tedphillips2501
5 жыл бұрын
The problem Werner Von Braun ran into with the V-2 was the strength of the rocket in the direction of acceleration. What I am looking forward to are powdered metal printers. Plastics do not have the required strength.
@Swenthorian
5 жыл бұрын
Mass-produced rockets. Welcome to the future.
@juliusfucik4011
5 жыл бұрын
I've been playing Factorio for 6 years, thank you!
@jasonwong5540
3 жыл бұрын
Luke Henderson, that office guy, SOLVE YO DAMN RUBIK BRO. MY OCD IS DIEING INSIDE.
@ifell3
5 жыл бұрын
Basically it's a MIG on a arm. Did no one read the PDF on global change. Lulz
@_.twixxx
3 жыл бұрын
them: reusable 3d printed rockets spacex: haha water tower go brr and land
@rivaledrandom1282
5 жыл бұрын
Alright we have this new state of the art 3d printer, what should we make with it? Car parts Building material Eco friendly products . . . Rockets
@davidfranzgicain9274
5 жыл бұрын
This Guy might revolutionize the Rocket Manufacturing Industry
@MaN2Mega
5 жыл бұрын
Cool, i want to visit space within 15 years without going bankrupt, keep it up and make it happen! 😅🤙
@Dmiudo
4 жыл бұрын
That's great and all, but the thing with 3D printing is that the final product will have different material properties throughout because the material is not all deposited at the same time.
@ExpertEditz
5 жыл бұрын
3:06 do I see Borderlands there in the bottom? Borderlands 3 hype!
@michaelkhobbs741
3 жыл бұрын
I think you guys are amazing. I've been a Rocketeer for over 30 years and to think the consciousness I help spread is really coming to life. I'm very proud to see something so amazing keep it up guys and girls and whoever else they claim to be. 🙏😎👍
@samihachem3212
5 жыл бұрын
It's an amazing time to be alive🚀
@4167626628
4 жыл бұрын
@5:13 these guys actually put the Protoss emblem on their wall haha
@laurieagnew6706
5 жыл бұрын
Please stop calling it a printer. Its a robotic welding arm..
@manickn6819
5 жыл бұрын
It really looks like a MIG head on an industrial robot. I feel the brilliance is in the patent and controls. I wish these guys luck. They seem to have a good approach with excellent potential for spill over into other industries.
@justicewarrior9187
5 жыл бұрын
PRINT THE PERFECT WIFE /GF!!!! 😀
@dhirendramaharaj9407
4 жыл бұрын
You guys are the forefather of the future's next gen space exploration ( hope it sounds right)
@johnvoidec5170
5 жыл бұрын
Could you use sound waves to shunt heat away on a very localized area to cure the part you like but excite the part you don't (and then remove it)? Would this result in greater precision?
@aaron4820
5 жыл бұрын
This is very cool, even if the payload is tiny, the fact that it's automated make that less of an issue, especially if this can drastically cut down the launch costs even if everything is disposable.
@eugeneminton2613
4 жыл бұрын
what i think is interesting is that they could print sheets of metal, where the strands of the printed material are stitched together. would that not increase the strength of the end result? right now i think the practice might be to fuse sheets together with some sort of cross alignment of the, oh i forgot what its' called... in wood it would be considered the grain of the wood, beads? idk, frankly its speculation on my part, i'm not in the field... carbon composites are also fused together with cross grain/thread patterns if that helps..
@ezman-vn8zy
5 жыл бұрын
Well that's what we exactly do in space engineers the whole day. But we also print cars, space ships, sattelites, and a whole bunch of stuff.
@Etakened
5 жыл бұрын
Hope the rocket casing is stable and has no weak points due to it being 3D printed.
Пікірлер: 1,9 М.