Blueprints are done in Update 8 Experimental, so far they will crash on Update 7. There are aliment issues in 1.0 for mirrored prints with assemblers to close to an edge. Here is link to blueprint files: drive.google.com/file/d/1iRkNp0f3rv-mFfh8PfiDDpjbrhm2L8R8/view?usp=sharing Reinforced iron plate video: kzitem.info/news/bejne/lGZq0GymhnmZq4I
@crushedexe
Жыл бұрын
there is no update 7 blueprints available?
@RUDY-COLEMAN
Жыл бұрын
thank you for not locking your blueprints behind a pay wall
@bakedpuffins2303
3 ай бұрын
That's devious I didn't know people did that
@ForgeIs2Fast4U
3 ай бұрын
@@bakedpuffins2303 often youtubers lock it behind patreon
@Ecliptor.
2 ай бұрын
@@bakedpuffins2303 To be fair to totalxclipse, he does make tutorials on how to make them, so you can just follow the tutorial vid and reproduce them yourself without paying. But yeah, it's kinda cringe.
@CriminalMindsQuotes
3 күн бұрын
This
@Rambrus0
Жыл бұрын
This switch between production chains is genius! I love it so much
@heatriangle
Жыл бұрын
meanwhile my 20 motors per minute factory covers the entire blue crater lake lmao. some incredible use of space you have here
@AshT8524
Жыл бұрын
This is really helpful and I love the editing, Very nice ✨Thank you
@els236
Жыл бұрын
I've just started a singleplayer playthrough and I am struggling so hard with having everything neat and tidy. I must have rebuilt my base several times already and right now, I have a giant floor level of only smelters/foundries, a second level with constructors, a 3rd level for conveyor routing and then the 4th floor is the assemblers... been stuck on phase 2 for hours with what feels like zero progress. Only just started producing the Versatile Frameworks, but no longer have a Smart Plating area and haven't even touched the Automated Wiring (or w/e it's called) Going to have to finally check out your blueprints, as they are so smart and compact. Thank you for not paywalling them behind a patreon, or asking "join my discord" - because that shit drives me nuts. edit: I see now that you are able to make them so compact because you don't mind having everything clipping x) fair enough as you can't really see it from the outside :P
@Yakez42
Жыл бұрын
That is a Satisfactory in the nutshell! I redesigned my factories numerous times. It is cool puzzle to solve each time around. Both in terms of production chain layout and in terms of physical placement of everything. And surprisingly I enjoy Satisfactory more taking enormous amount of time unlocking things and making sure that everything is neat and tidy before rushing to the next phase. I have some limitations for clipping. I do not do hard clipping, and for the most part I use ability of conveyor lifts to snap with inputs and outputs way closer than by the default. I just feel like game miss the lift splitter/merger part. Otherwise you can just place belts straight though buildings, each other and even clip buildings into each other... But I do not do these types of clipping.
@mdclark630
Жыл бұрын
Very cool! Your dismantle tool highlights the entire blueprints. Are you using a mod to do that or is there a feature I am missing? Thanks!
@Yakez42
Жыл бұрын
It is update 8 feature
@mdclark630
Жыл бұрын
Thanks for the reply! I'm cringing at how much time I have wasted without realizing they added that.....@@Yakez42
@bulkvanderhuge9006
10 ай бұрын
You hit "R" when in the dismantle tool, and it will go into "Erase BLueprint" mode.
@deanzap3658
Жыл бұрын
This is beatifull content. We want more❤❤❤❤❤
@fernandobispopereira7673
Жыл бұрын
Ty man, help me a lot.
@TheWildSma
9 ай бұрын
How were you able to get the conveyor lift to attach so close to the constructor at 5:07? It seems like the merger is snapped to the top of the lift, but I can't get the constructor output to clip that closely with the lift.
@Yakez42
9 ай бұрын
First you place celling conveyor mount at required distance and extend lift from up > down, snapping to connection. Note you can use R key to reverse direction of the lift. Then you just add merger/splitter to the lift after removing mount.
@evilfreakofdesboesen
Жыл бұрын
Brilliant! ❤
@hunterw9156
Жыл бұрын
Thanks for a New video ❤
@Yakez42
Жыл бұрын
You're welcome 😊
@Homarid1
Жыл бұрын
Amazing. I'm over here with my 5 motor/min setup that takes up like 10x15 area questioning my life choices. And lets not talk about my heavy modular frame factory. Do you have anything for the electronics like computers?
@Yakez42
Жыл бұрын
Yep. This week I am making video for 2 fuel generator blueprints for 300 oil into 2.85GW or 9GW of power. Next week should be 18 Computer / min blueprint. That one can produce either 18 Crystal Oscillators and 48 circuit boards or 18 Computers. Actually made it before my Motor setup, so switch tech was made for Computers first xD Then I have personal storage blueprint similar to my Iron Encabulator for AI limiters, Circuit Boards, HS connectors, Quickwire, Silica and Quartz. Will make a video on a later date.
@hugobrochet4417
Жыл бұрын
I still have a question about blueprint, do we need to unlock blueprint milestone to build downloaded blueprint ?
@Yakez42
Жыл бұрын
That is something I never tried. And I bet it should not let you into blueprint tab before that. In any case you at least need to manually create session folder for blueprints. But other aspects of blueprints are pretty clear. Once you have them from another save you can plop buildings that you not even unlocked yet. Also they always retain alt recipes and all the locked decorative features. This is sort of abusable you can even copy paste recipes without unlocking them.
@bulkvanderhuge9006
10 ай бұрын
Why don't you use the recipe for the Steel Rotor? It uses the same parts as the Stator. Pretty much an identical setup
@Yakez42
10 ай бұрын
Steel rotor use double the amount of machinery to get to the same numbers. Copper Rotor just saves space essential in blueprint form.
@yasinbioyi
8 ай бұрын
Just yuh👏🏻
@Lqvy1
Жыл бұрын
What software was used for the planning?
@Yakez42
Жыл бұрын
Satisfactorytools
@Lqvy1
Жыл бұрын
@@Yakez42 Thank You!
@epicinator2372
Жыл бұрын
What flow chart program do you use?
@Yakez42
Жыл бұрын
For satisfactory calculations it is satisfactorytools dot com. Have some outdated bits like old weapons tho. And also there is very nice free software to make charts by yourself at draw dot io. Nice tool to make charts without calculations.
@komodo-dragon
10 ай бұрын
how do i connect the 2 mirrors?
@Yakez42
10 ай бұрын
You don't. They are technically independent factories with own set of inputs and outputs. Any connection is either visual or logistical in nature.
@komodo-dragon
10 ай бұрын
@@Yakez42 ahh
@odysseusanime629
5 күн бұрын
If you don’t make your own chains, try to figure the best way of doing them and think about how to improve them but instead downloading some blueprints that just do everything for you, what is the point of playing this game ?
@Yakez42
5 күн бұрын
you can flush toilet in Satisfactory 1.0! \0/
@ITT59Gamer
Жыл бұрын
can u upload ksp
@Yakez42
Жыл бұрын
While Uber Entertainment is developing KSP IP I highly doubt this. I would love to, but people in general are not interested anymore. Every new KSP video is killing my channel at this point. Even when compared to poorly performing Satisfactory videos (for now). At this point either this channel die with KSP or I do something else.
@ITT59Gamer
Жыл бұрын
@@Yakez42 ok
@timberg3308
Жыл бұрын
nice need more bleu nice dont
@diviners4ge
6 ай бұрын
Rrrrrrrrrrrotors
@Disorrder
Жыл бұрын
Why everyone put ingots in blueprints 🤦♂️ you can save a lot of space producing ingots just on site next to miners
@Yakez42
Жыл бұрын
Nope. Standard ore to ingot ratio is 1:1. Alloy recipes require logistics like anything else. So there is no difference between producing ingots on site or in the factory. First one only add one extra step and still have the same amount of work in terms of balancing as raw ore.
@harliquin76
Жыл бұрын
your blueprints are really awesome. I downloaded them and picked them apart to get some ideas of stuff. Your videos have changed the way I play the game. I hate using someone elses blueprint though. I feel like I am cheating unless I make my own, but you really got me working on modular buildings for most use items.
@Yakez42
Жыл бұрын
That's my jam! I love to reverse engineer stuff myself although it is usually game mods or java script and definitely not blueprints in Satisfactory xD So far I can totally see that there are multiple ways that you can approach blueprint factories in Satisfactory. Ratios can be very very different. There are very interesting choices in some places further along and I bet when I finish tier 8 I will see the places where it can be rather different. So everyone can adapt my blueprints to a personal style. And architecture can be more interesting! Rather huge potential even for such a limited tool.
@deanzap3658
10 ай бұрын
Can we get. Steel blue print...beams and pipes oneclick build please
@triplexSch
10 ай бұрын
It would be great if you walk through the creation of your blueprints in a slower paced way. Show us how you come up with your blue print in real time!
@ImportirMallcom
2 күн бұрын
download and reverse engineer, bro
@lil_sweden2323
2 күн бұрын
Looking at these blueprints videos make me realize, how stupid i am to play satisfactory :(
@thearm007
2 ай бұрын
I got a lot of idea after see this video about designing blue print. nasty😉
@notoriousi
12 күн бұрын
Doesn't work on 1.0 because of clipping issues :(
@Yakez42
12 күн бұрын
There are some oddities with blueprint build mode snap in 1.0. Just use nudge tool with button H to align blueprints. Even if it is red, just press H and then align blueprint into the position with arrow keys. Considering Rotors mk2 print, it is scuffed for sure. The fix is to redo half of the blueprint. Honestly I ether make new prints or just use 1 to 8 meter exterior adapter in between those prints. Painted beam is just the right size for the gap...
@xproo4682
11 күн бұрын
@@Yakez42 for the motor blueprint other then the looks, does it actually work or is there something that needs adjusting?
@just_dadam
4 ай бұрын
Genuinely amazing how you get so much in a blueprint!
@ScentofLaceration
9 ай бұрын
Modular factories are so quick and save a lot of space
@bly3958
11 ай бұрын
Thanks for all your awesome work and blueprints! By any chance do you have a blueprint for efficient steel production (aka steel encabulator?) for encased beams, pipes and steel beems? I tried to create mirrored one, but it's just produces 18s of each and I constantly run out of steel beams, while overflowing pipes and encased beams...
@Yakez42
11 ай бұрын
I have one but it have even smaller production rates, hence I have the same issue with all in steel encabulator.
@175firefighter
9 ай бұрын
I don't understand the colors folder. Where do I input all these color codes? What are VHS? MCRN? I don't see these options when I press X.
@Yakez42
9 ай бұрын
These are color codes if you want match something else to these factories. You can either *edit* default 16 swatches or use custom swatch and create color presets there. This set have MCRN color scheme.
@agentphilz5972
Жыл бұрын
I feel like im missing a step. I would like to use your motor BP, but im unsure on what mirror to use with it and then what to conect when i attach a mirror BP. unless im just over thinking it. Other wise thanks for making thess. They do save time and space. Great work and thanks for sharing them!
@Yakez42
Жыл бұрын
For the motor production you need rotors. Both blueprints are 1:1. So it can be any combination of two blueprints. Either 2 separate buildings with different mirrored blueprints for 22.5 motor output. Or it can be single building with motor and rotor blueprint combined for 11.25 motors / min. In either case connections are separated and it is all about visuals.
Пікірлер: 65