*♡ Claystrip Settings ♡* ➤ Strength: ~0.507 ➤ Normal Radius: ~0.9 ➤ Tip Roundness: (Adjust to higher if wanting softer. Lower if harder surfaces like eyebrows) ➥Stroke settings - ➤ Spacing: 2% ➤ Input Samples: ~8 ➥Edit>Preferences>Input: ➤ Wintab ➤ Softness Below 0, lower amount is lighter strokes, like -0.75 is lightest (I like -0.5) ⸻ *♡ Fill/Scrape Settings ♡* ➤ Invert to Scrape On ➤ Area Radius: 0.8 (larger area radius adjust as needed) ➤ Scrape Area Radius: 0.8
@Outgang
6 ай бұрын
Thanks a lot Cryppi.
@abhiraaid
Жыл бұрын
This is one of the few videos on KZitem which actually makes a huge impact on Blender Sculpting, Thanks Laura
@yugos.oficial
7 ай бұрын
Laura or Peter?
@EriklLo
4 ай бұрын
@@yugos.oficialclearly male
@felixxcatus
23 күн бұрын
your brush settings made me a better person
@clarencezer
2 жыл бұрын
Thank you for this, after leaving university I just don't have access to Zbrush anymore :, ). This helped a lot!
@rockon8174
2 жыл бұрын
Zbrush offers a monthly subscription. Dirt cheap.
@gloriouslumi
2 жыл бұрын
@@rockon8174 Software-as-a-service is a scourge that deserves to be stamped out at every opportunity. It's anti-consumer, pro-greed bullshit that needs to die.
@IrocZIV
Жыл бұрын
Something that took me forever to realize, you can save your brush settings as default (they are normally project dependent). Make the brush changes you want, on a scene you'd like to have open at start up, then go to File>Defaults>Save Start Up File.
@chayanguhathakurata5140
5 ай бұрын
what sorcery is going on ?
@hman2912
Жыл бұрын
A good tradesman never blames their tools. Learned a lot from this. Thanks
@TheAbRaMaX
2 жыл бұрын
I think the best thing for blender for me is after the sculpt you can light it and render it right away in the same scene, I’d really would like to see you experiment with that!
@Outgang
2 жыл бұрын
Yeah I started digging into that a bit. It's definitely fun to render and sculpt in the same software. There's a LOT of other stuff that's taking precedence for me though before I get to rendering, but we'll get there.
@felipealbuquerque6309
2 жыл бұрын
I have seen a lot of videos about blender sculpting and brushes but these settings no one talks about! And it's really life changing lol
@richardisworthless
2 жыл бұрын
Your videos are great and I really think this channel is gonna blow up at some point.
@Outgang
2 жыл бұрын
Thanks Richard! That'll be the day.
@VickyHikari
2 жыл бұрын
Love this !! I always wanted a precise way to improve my brushes. I've been sculpting on Blender for the past 2 years, did some changers on my brushes but never something like that. Thank you for that !
@Outgang
2 жыл бұрын
Glad it was useful Vicky! Cheers.
@brancogabriel525
2 жыл бұрын
Ih, ala kkkkk A moça foda no Blender do grupo do Blender BR kkkkkkkkk
@Dragonours
2 жыл бұрын
Such a life saver! I've been wondering why the Claystrips brush felt so underwhelming compared to what I was used to. Thanks a lot for the work you put into getting those settings right.
@krzysztofdeoniziak5618
2 жыл бұрын
Have you perhaps considered getting involved in Blender development? It seems that the sculpting module in blender is treated a little unevenly, especially when you consider the development of geometry nodes, it also seems to me that there is a lack of someone with your experience there, who will tell you how to change the default settings of brushes, what to add, and what to change to make blender a convenient tool for sculpting. I think a lot of people would love to ditch zbrush, but they bounce back from that first approach because things work differently/badly. Not everyone has the patience to sit up all night to configure one brush :)
@grimwolf9988
Жыл бұрын
The improvements are subjective. The way the clay brush works by default is nearly identical to ZBrush. Personally I don't think making it smoother is necessary. 1) It drastically increases the processing power needed to handle the brush strokes. This is only a huge issue with lower end systems or very high poly meshes, but even in this video there was an obvious increase in stroke lag. 2) The practical gains are negligible, since you would traditionally smooth the strokes afterward. Making the strokes smoother doesn't prevent the need for this, since you'll still have a bunch of obvious strips on the surface. Also the reason so many changes were necessary in this video is that some changes were being made just to fix the side effects of earlier changes. For example, the default pressure curve on the strokes is great. But reducing the spacing causes the intensity to drastically increase due to overlapping samples. She then had to go back and reduce the intensity to compensate for that, then had to increase the pressure curve to compensate for the reduced overall intensity flattening out the strokes.
@jowiemonster
2 жыл бұрын
nice video , you should check out the fall off setting in the brush setting. this changes the shape of the brush stroke , which is handy for if you want sharp (ex. hard surface edges) , round (ex. wrinkles ) or flat stroke (ex. build up) . also you can create new brushes out of the other brushes and save them with a different name. if you go to the left brush selection bar , you can click and drag it out until it show the names of all the brushes.
@Outgang
2 жыл бұрын
Thanks for the tips Jowie.
@SourPlanet
Жыл бұрын
Awesome video. So many videos on process, so few on the literal tool functions. I don't have the hours to sort things like brush clumpiness. Your time is much appreciated 🙌
@eucharistenjoyer
2 жыл бұрын
Sculpt-dev actually allows a MUCH higher amount of customization regarding the pressure curve for each output (strength and radius). Hopefully some of the changes will come to master in three months or so.
@Outgang
2 жыл бұрын
That's awesome to know.
@KobanWanko
2 жыл бұрын
Thanks for explaining what some of these settings do in detail. Really helped narrow down and fix why I wasn't fully satisfied with a few of these brushes.
@shanabenjamin8945
2 жыл бұрын
Your interludes cracked me up!! Love learning in the fashion as it takes the edge of the serious business of the world!! Brilliant 👏
@Stillenacht3D
2 жыл бұрын
This was super helpful! I've been using Blender for about a year now, even in production and its nice to still be learning new tricks like the ones you showed. Thanks!
@khalatelomara
2 жыл бұрын
Blender foundation has to set the default values to these 😃 That's impressive 👏 👌 👍 Really informative video
@xrx2023
2 жыл бұрын
wtf seriously?
@Brujah1988
2 жыл бұрын
Can I just say the quality of your videos is second to none, even coming from 3ds Max I'm just hypnotized and have to watch them, super interesting tips! Also, very soothing voice lol
@Outgang
2 жыл бұрын
3ds max is my first 3d love :) I definitely still have a sentimental attachement to that software.
@theviperman3
2 жыл бұрын
Thank you Laura for sharing your Blender brush settings.
@Genshi-studio
9 ай бұрын
Blender 4.0 is here! I nedd a review whith the new features.
@eddwarriior
2 жыл бұрын
Love your videos Outgang! Definitely a goldmine you deserve a bigger audience for sure! as a student i cant thank you enough for the deadline saving tips lol Can we have more marvelous designer videos please? like the whole pipeline from marvelous to game engine like UE, there's barely any coverage on those type of topics
@Outgang
2 жыл бұрын
Thanks for the compliments Edd! If a lot of people request more Marvelous Designer content I'll make some but there's so much to say about other software.
@khalatelomara
2 жыл бұрын
I am really looking forward for a video of what blender sculpting misses so badly that it will create a difference for you as zbrush user , that may help b3d to evolve in the right direction and yet available for everyone, as from this video you changed my life in sculpting 🤣 I may do nice classical facades with ease now You may give mesh filters a try , they do crazy things
@Outgang
2 жыл бұрын
I miss Zbrush layers.
@khalatelomara
2 жыл бұрын
@@Outgang you have viewlayers and facesets , I didn't actually try to sculpt multiple objects at the same time , but definitely it is needed if didn't work out for you
@CoryDeVore
2 жыл бұрын
@@Outgang Yeah even just a morph target would be great. You CAN do this actually with Shape Keys in Blender. It's more of an animation tool, but it totally works with sculpt mode, just like Zbrush layers. It doesn't hold color data though.
@Outgang
2 жыл бұрын
@@Cijital I think the multi-res is more akin to subdivisions in Zbrush. I tried having more than one multi-res and was getting a warning by Blender that it wasn't a good idea (I don't remember the message exactly) but it doesn't seem like having many of those is possible.
@lawrenade
9 ай бұрын
This is amazing, thank you Laura. I haven’t actually tried sculpting yet but I can get this setup on my startup file ❤️👍🏻
@leongachuiri3626
2 жыл бұрын
This is so awesome thank you for thinking about us Blender people
@3crazyclowns
2 жыл бұрын
Thank you so, so much for sharing your knowledge with us. Your videos are so pleasant to watch. Well done!
@MrPaulowillians
2 жыл бұрын
You are amazing, you never stop always innovating. Thanks for these demos in Blender. Professionals from other software like Zbrush manage to break through before us beginners. Thank you so much!
@Outgang
2 жыл бұрын
Thanks for the warm comment Paulo!
@laeianimation
2 жыл бұрын
Greatly informative video, thank you so much... am I the only one who got hungry watching it? for some reason...
@Outgang
2 жыл бұрын
I'm privately financed by the butter cartel.
@Skycers
2 жыл бұрын
Liking the buttering references with footage.😆
@revelationglitch6408
2 жыл бұрын
so wanna say that i love your channel... thanks a lot for vids! have a nice day!
@astridtrisorio4894
7 ай бұрын
Hi Laura, this video really saved me! don´t know how to thank you! It was really hard to find the right settings for the sculpting brush, especially with such good explanation and details as you gave. Thanks again :)
@hotsauce7124
Жыл бұрын
Thank you so much. I’ve been looking to jump in Blender sculpting. Please continue to teach how to better use Blender for sculpting.
@Outgang
Жыл бұрын
I plan to. Cheers!
@xragtagkittyx
Ай бұрын
Thanks for this, really helped me out :)
@Unit27
2 жыл бұрын
Thank you! It is incredible what you can make with 2 well selected and well configured tools.
@mrofnoctonod
Жыл бұрын
Thank you so much for your sharing of how to use the Fill/Carve Brushes. I've been using Smooth all the time and getting those ugly spikes.
@maykd4481
Жыл бұрын
Just discover your channel, and i totally love it!! Great tutorials, informations and content with lovely jokes:) Thanks for your time and effort, you are amazing.
@Outgang
Жыл бұрын
Thanks a lot Mayk!
@ferhat3223
2 жыл бұрын
Thanks for sharing with us.
@FR3NKD
2 жыл бұрын
This video is very interesting. I value your knowledge about sculpting a lot, it's cool to see it applied to Blender! I was happy to become a member after this video 😊
@Outgang
2 жыл бұрын
Welcome to the family! Thanks for your support.
@chrishauer5106
Жыл бұрын
New channel with amazing videos! Love them. Just need to find why Blender don't detect Pressure.
@Cyromantik
2 жыл бұрын
I love your guides! I've been watching recently to help me get better at doing human figures in NOMAD Sculpt on android, which is the nearest thing to Blenders' Sculpt mode when I'm on the go. Sometimes I'll even have your videos running on picture-in-picture (YT paid account) while I'm modeling - it really helps me to keep motivated!
@Outgang
2 жыл бұрын
That's awesome Cyro. What's your take on NOMAD Sculpt?
@KKOLL007
2 жыл бұрын
Wow this is amazing, hope to see more tweaks like this, thank you.
@Forjugadname
2 жыл бұрын
Great timing I've just been looking into getting into sculpting in Blender.
@mikymuky1171
2 жыл бұрын
Amazing video! I've been using the bare minimum of tools in sculpt mode for ages. Now without even being ready for it I know how I can do so much more! I'll be looking forward to your other videos
@JoshuaMerrill042
2 жыл бұрын
This was so helpful for me! Thank you for explaining all of these settings so well!
@TomasHradckyComposer
Жыл бұрын
This will be very helpful. Thank you.
@biggestonee
Жыл бұрын
Thank you for sharing these tips!
@benaubone
6 ай бұрын
Great video
@pyros.
2 жыл бұрын
Right before you mentioned it, I was like "Oh look at that, just like butter."
@kurtbutler9223
5 ай бұрын
Thank you !!!
@eLBrandzo
Жыл бұрын
You mentioned your fill brush not being perfect in its settings yet - i think i sense what you mean. Try this: setting hardness to "1" and autosmothing to the value of "0,1" and spacing and samples like you had on your clay brush. What do you think? let me know please. Best Linus (maybe these settings are rather for scaping purposes)
@CG3A
Жыл бұрын
Thank you very much! Best tips ever!
@LejamOnerock
2 жыл бұрын
Huge thanks !
@rogerramjet2656
2 жыл бұрын
Great info - Thank you. Very helpful.
@user-sf2hj5ep7f
2 жыл бұрын
Great as always!
@Ziling_weng
2 жыл бұрын
Thanks for sharing! Pretty useful.👏👏👏
@lion_towers3d
2 жыл бұрын
Oh wow - super useful - thanks!
@stevanM100
Жыл бұрын
Dear Outgang, thank you for all your hard work and presentation. I need little help, I started with sculpting yesterday in Blender. It is my first time. And I can't even get the lines you have at 1:31. What I get is blurry strokes with square edges. It is frustrating me, only thing that is fixing it is when dyntopo option is turn on, but as I see, in your presentation dyntopo is disabled. Can anyone help me? I started project with Ico sphere then I get subdivisions from 2 to 7 and that's it. I want to learn how to sculpt monsters, character etc.
@BrianLife
2 жыл бұрын
Great! Thanks for doing all this work and sharing it!
@shanabenjamin8945
2 жыл бұрын
Absolutely love you work!! Thank you so much 💓
@Outgang
2 жыл бұрын
Thank you very much Shana.
@juniortufanoD3
2 жыл бұрын
Thanks a lot for sharing your knowledge!!!
@gronith
2 жыл бұрын
This is so helpful. Thank you.
@fmmustafa
11 ай бұрын
it was really helpful thanks
@leongachuiri3626
2 жыл бұрын
Thanks you so much for joining the blender dark side
@joey_yangyin
2 жыл бұрын
tysm for sharing this content with us
@RobertTolppi
2 жыл бұрын
Hi Laura! I’m curious as to the specifications of your computer. Those are a lot of polygons you’re pushing around 😅
@Outgang
2 жыл бұрын
Hey Robert, it's an Intel 9900k, 64gb or ram and an rtx3090.
@RobertTolppi
2 жыл бұрын
@@Outgang thank you for replying!!
@93hothead
2 жыл бұрын
@@Outgang bruh I only have a rtx 3060....
@lazyng6631
4 ай бұрын
6:12 Thanks for sharing, now I can make silky brushes in Blender. Besides,how do you get such a smooth brush in a Zbrush? As I haven't yet been able to fully transition to sculpting in Blender, I can see that your brushes are silky smooth
@WillOS3D
2 жыл бұрын
Thank you! very useful.
@jaysonjavier2043
2 жыл бұрын
Thank you for this video! At the end you mentioned Hard Surface Sculpting. Would you have different settings for Blender for that as well? Would be interesting to see!
@Outgang
2 жыл бұрын
I'd have to give that a try first. I'm confident the brush settings I show in this video works well to sketch out hard surface pieces but I'm less confident they'll be good enough for the final polish.
@dnaindieart
2 ай бұрын
Muy bien logrado el trabajo Yo le doy.
@zeroalpha_nz6674
Жыл бұрын
great tips, how did you get the sphere to 6 million vertices? do you always start with something this size? Thanks
@brewmeup5827
2 жыл бұрын
Nice. I have been learning blender over the last 2 years or so.. (still learning since there is just so much you can do in it) but lately I have been trying out sculpting characters. Your brush setting advice made a huuuuuuuuuuge difference. Also started learning Zbrush fairly recently.. about 4 weeks ago or so,.. and finding its learning curb to be pretty steep. tbh I am having the same issues with my brushes in zbrush so ill check over your vids to see if you have advice on brush settings for that too. Ill check out your channel too and consider subscribing since it seems like you really know your stuff.
@2bit8bytes
Жыл бұрын
12:55 Oh! You're saying the Fill brush's Scrape opposite uses the actual settings of the scrape brush?! I thought it just inverted the current selected brush's actual pertinent settings. ...So I assume they all do that. That makes so much sense. lol Thanks! (and for everything else you've posted) (edit: Wait up, so it normally just inverts the settings of the brush itself, but specifically checking "invert to X" makes it function as a swap?) And the Strips brush settings finally let me work this piece in the right way.
@constantineskliris
Жыл бұрын
Thanks
@tistalagosta3449
2 жыл бұрын
💙 great video
@user-sl4jw3gw4l
11 ай бұрын
I'm so confused.... mine does not look anything like this. I have to set strength above 1 to make any difference in the mesh.
@3enny3oy
2 жыл бұрын
Thanks for sharing this Laura. I found this genuinely useful. I’m really interested in exploring your content on Outgang and will give it a go. Before I do, I’d like to ask how much is specific to working in Zbrush vs being applicable in Blender too?
@Outgang
2 жыл бұрын
Hey 3d, it varies. There's Zbrush sculpting content on outgang.studio that is directly applicable to Blender since I rely on the core basics most of the time and those are the same between software (Clay brushes, Move/Grab, Standard/Draw, Dynamesh/Remesh, ect.). Some of the Zbrush classes that are more technical aren't that relevant to a Blender sculptor. There's a 7-day money back guarantee so if you find the content not to be relevant to you within that timeframe you won't lose a dime. Cheers!
@deoclicianookssipinvieira5858
2 жыл бұрын
Thank you!
@321357w
2 жыл бұрын
Thank you for the insight, sadly with the advent of the involvement of the Maxon licensing I think I will be reverting back to Blender from ZBrush as this is purely a hobby for me and not a commercial venture. where I can justify the cost. I look forward to more from you in regards to Blender.
@dinisdesigncorner332
Жыл бұрын
do you cover how to manage brush libraries in one of your videos? there are some addons out as well.. curious whst your workflow is
@Outgang
Жыл бұрын
It's not covered. So far my solution to that has been to configure a default Blender scene to start from. I need to look into addons for that as long as they're free.
@dinisdesigncorner332
Жыл бұрын
@@Outgang there are two which i know and tested ..one is called Brush Manager and the other one is called Sculpt Alphas Manager ..played a bit with both but not enough so i can recommend one over the other.. both are free
@ammonn9930
2 жыл бұрын
I tryed blender but cant move to it because my love for zbrush is to big 😍
@LordYodel
11 ай бұрын
Thank you very much. Can we also control the second ring of the Brush? Does it do anything like in Zbrush, as a falloff? Or is this just a visual appearance, and nothing else?
@filipemecenas
2 жыл бұрын
Thanks alot 🖤🖤
@drsleepy3867
Жыл бұрын
i get some weird dots when i use the crease brush from some angles is it only me?
@ssodangi
Жыл бұрын
Thank you for this wonderful tutorial! Pls is there a way i can save this settings in sculpt mode once, so it carries over to any new sculpt file i start?
@Outgang
Жыл бұрын
I've been looking around for a solution to this. I came across a thread from Blender devs that they're aware of this limitation and looking for ways to fix it. Right now the best way to go about it it seems is to save your brush settings within a .blend file that you always start new sculpts from.
@rizkapermata880
2 жыл бұрын
how to change radius easily with pen table???
@Sanzhar_00_
Жыл бұрын
Thank u 😁
@SpragClutch69
Жыл бұрын
Good Job! But when I try the settings you have on my little rtx3060 things grind to a stop using Dyntopo, feels like butter that's been in the freezer! 🙂 Should i be using dyntopo or remesh or some fancy modifier?
@skeletonking4119
2 жыл бұрын
Thanks you so much!! But I fear my wacoma in my home and I barely use it , so so sorry!
@Outgang
2 жыл бұрын
Did your tablet hurt you or something?
@skeletonking4119
2 жыл бұрын
@@Outgang barely use it which in term that I am the one who hurts her so yeah , thanks for asking :)
@claudiosettiart
2 жыл бұрын
Hi Laura - you're videos are excellent and very helpful. I also have been using Zbrush professionally for several years and recently started learning Blender as well. I sculpt the same way as you do in terms of building up forms with the Clay buildup and then soft polishing them down a bit and rarely use the smooth brush... I was wondering if you know of a setting that would be similar to back face masking in Zbrush? For instance I turn on back face masking on the Clay Buildup brush when I am working on forms that are thinner so that the displacement doesn't collapse the shape because it grabs through the other side of the mesh...
@mattwhitehead32
Жыл бұрын
In the brush settings open the 'Advanced' dropdown. At the bottom there's a checkbox for 'Front Faces Only' that should do what you're asking for.
@claudiosettiart
Жыл бұрын
@@mattwhitehead32 thanks so much! 😊
@hazdrubal5962
Жыл бұрын
How do you go around the fact that Blender doesn't have the resolution change option like Zbrush has?
@Outgang
Жыл бұрын
You mean subdivisions? Blender has that, it's the Multires modifier.
@joshua42777
Жыл бұрын
I'm wondering what is your opinion of working with blender then working with zbrush?
@alapidis
2 жыл бұрын
Laura do you use any add-ons for blender like Sculpt Wheel to make the experience of switching brushes faster and more comfortable like zBrush? One of the things I like about zbrush is how easy it is to add alpha brushes and custom brushes to the pallet of brushes quickly and make them easily accessible. That sort of extendability seems lacking in blender at first glance aside from loading everything and saving it as the default startup scene to retain the brushes and changes.
@Outgang
2 жыл бұрын
I just use plain flavored Blender for now but I'm definitely feeling the limits when it comes to storing/switching brushes. I'll check out the add-on you mentioned. Cheers!
@urosprica8670
2 жыл бұрын
you rock.
@sunraj5518
Жыл бұрын
Your voice , really i Love that , And the way you teach!.
@Outgang
Жыл бұрын
Thank you! 😃
@muhammadaliefullah9683
10 ай бұрын
Thanks Laura. You very help me
@funkyjeans8667
2 жыл бұрын
What's your navigation settings? In sculpting mode "Rotate around selection" stops working.
@Outgang
2 жыл бұрын
It's the default Blender navigation with the MMB.
@funkyjeans8667
2 жыл бұрын
@@Outgang thanks
@truegeorg
Жыл бұрын
Eah, tell me why smoothing over the surface does not work, it would seem such an obvious tool from traditional sculpture when water or a wet cloth is used to save the object and smooth out only small tectonics, but unfortunately it does not work in blender, only the Laplacian works
Пікірлер: 235