I must say! Your comparison is the most in depth comparison I've ever seen. Absolutely phenomenal video.
@xcorpeo
5 жыл бұрын
Thanks for the compliments! Glad you enjoyed it :)
@Anakunus
3 жыл бұрын
Thank you for the comparison. I was under the impression that the official figure is of better quality, but after seeing this video, I am definitely going to get the THF version. Well done.
@xcorpeo
3 жыл бұрын
As long as u can fix the couple of issues with the THF, then it will be better than the official. Thanks for watching
@damienpua1977
4 жыл бұрын
Thumbs up for the extremely detail comparison between the two models. All of us always wants to know the quality difference between the official masterpiece against their KO versions.
@xcorpeo
4 жыл бұрын
I hope u find it useful! Thanks for watching
@zahiranderson6448
4 ай бұрын
I just received my version today, and I'm very impressed. There are no issues with my version. Thanks again for the comparison 👍
@xcorpeo
4 ай бұрын
Awesome and congrats
@Skavatar789
3 жыл бұрын
thanks for the tips, I filed down the rear trailer pegs, fits nice and secure now. also turned the head around, had to remove both screws to remove the entire head so I could pry the face off the back of the head. he goes great in alt mode with the WFC deluxe vehicles.
@Senbonsakuraink
5 жыл бұрын
good job dude! thanks :) now I'm convinced to get the THF
@xcorpeo
5 жыл бұрын
I'm sure it will be worth ur while. And thanks for watching!
@mikeh1840
29 күн бұрын
Thanks. Lots of useful tips. i had to repair the right leg ratchet as well.
@xcorpeo
29 күн бұрын
This was years ago and it still holds up for me
@bphater31
4 жыл бұрын
Glad I didn't get the official one. Will get this one for sure. Thanks
@xcorpeo
4 жыл бұрын
For the quality and small fixes here and there, this is well worth the price!
@idstealer000
5 жыл бұрын
Thank you for the fix suggestions, I had to do everyone including both knees.
@xcorpeo
5 жыл бұрын
My pleasure, as long as it helps you get more enjoyment out of this Magnus!
@2007suprasport
5 жыл бұрын
Great review! Definitely looking to pick up the THF Hyper Magnum forsure.⭐
@xcorpeo
5 жыл бұрын
Thanks for watching! For what it's worth, he's good value 😄
@bradbunch637
4 жыл бұрын
Thank you for the comparison and all the advice! I missed out on the official, so now I have a Toy House on the way, and I've been very nervous about the quality. All the side-by-side views you used helps a lot.
@xcorpeo
4 жыл бұрын
My pleasure and I hope u like it when u get it
@DoubleBizzy
4 жыл бұрын
Just got mine from a seller who shipped quite fast for being in China (miffy21584). Very happy. The gun tabs were a bit loose, so tightened those up with a layer of clear nails just on the tab surfaces. Also, the tabs for squeezing together the trailer halves, both bottom and top, were a bit difficult. The bottom ones can be loose and move apart, so I clear nails to fix those. The tabs on the top (used to be the arms) are VERY hard to force together, but once you do they ease up a bit the next time. Overall, this is a REALLY good toy and great for the price. Light years better than my original G1. Several faces, everything is very sturdy once it's all tabbed together, and nothing feels like it's about to break. I found a way to store the second gun by shoving it into the space between the bottom / legs in trailer mode. Thanks for the review!
@xcorpeo
4 жыл бұрын
Yeah it's a bit of work to get everything the way it should be, but certainly workable for regular collectors. Once the work is done, it's a great piece. Thanks for watching!
@jasonjones-ji6qd
5 жыл бұрын
not too worried if it doest roll well since it wont be played with in that way but displayed ....great review! and thanks for heads up on the few issues ....hopefully you will be doing how to videos showing this process
@sideswipe1261
5 жыл бұрын
I think mine will be here soon! Thanks for the video, now I know what problems to look for and how to fix them. 👍
@xcorpeo
5 жыл бұрын
Glad to help, and hope the fixes turn out well for u. Thanks for watching!
@wgtan1081
2 ай бұрын
Nice detail video. Thanks a bunch!
@Knutt3r
3 жыл бұрын
Great review and thanks for pointing out how to fix the issues with the shoulders and the head
@xcorpeo
3 жыл бұрын
The knees might need fixing too. Glad to help
@DamageInc86
Ай бұрын
I couldn't even tell what he did for the shoulders.
@Okabe009
5 ай бұрын
Great comparison
@carnmarth334
Жыл бұрын
This is an amazing review. Very well lit and shot; lots and lots of useful comparisons; perfect pacing; easy to understand. Absolutely all of the information you'd need. I have only two questions: did THF do their own version of Delta Magnus, and did you buy it?
@xcorpeo
Жыл бұрын
Thank you! This was shot years ago and I probably could do it better today. To answer your question - I don't think they did a Delta Magnus
@HashbrownMashup
4 жыл бұрын
this is actually quite a good review/comparison. hope your channel takes off man
@xcorpeo
4 жыл бұрын
Glad u appreciate the video. Thanks for the words of encouragement! :D
@gwotaz
4 жыл бұрын
I am now also convinced to get the THF.
@xcorpeo
4 жыл бұрын
Yeah, I just wanted potential buyers to know what they are getting themselves into, if they think they can do the same fixes. Thanks for watching!
@ayabrea1383
5 жыл бұрын
Thanks for the head advise. Really roll very well.
@xcorpeo
5 жыл бұрын
For sure, easy fix. :)
@reminators
5 жыл бұрын
Well done on reviewing the comparison between MP22 and THF! THF HMagnum is definitely a steal when comparing to MP22 price and accessories. Adding the hinge to the butt flap and then tab it to the cab so that it does not fold back down is a smart move. I love everything about THF HMagnum except the stupid red color missile launcher connector when you configured it as G1 toy mode alt.mode. For those that are toy fans, that red color stand out so bad. For toon fan like myself, the red connector is mostly hidden in alt.mode since the launcher is configured on the side of the trailer and not the front.
@xcorpeo
5 жыл бұрын
I agree with u! I'm happy with what I got out of this THF. But it really needs fixes in a few areas, that I don't mind.
@JohnnyEFromNC
5 жыл бұрын
My THF Hyper Magnum is great. And I just applied a sheet of reprolabels which look amazing. I just need to get my 3D autobot symbols to complete him
@xcorpeo
5 жыл бұрын
I'm not sure where to get the 3D logos, but I've already applied normal 2D decals to him. Still enjoying him now. Thanks for watching!
@JohnnyEFromNC
5 жыл бұрын
xcorpeo I applied a 2D one to one of his shoulders. I’m just looking for 2 Autobot symbols to go in those spots on the trailer in vehicle mode
@kup98ss49
5 жыл бұрын
THEY FIXED THE BUTT FLAP!!!! Takara should be ashamed of themselves for not doing that in the first place.
@xcorpeo
5 жыл бұрын
Haha they did!
@reymed1670
5 жыл бұрын
Good review really
@xcorpeo
5 жыл бұрын
Thank u for watching and commenting! :)
@carefreejimbob
5 жыл бұрын
Hey magnus, you no longer have a butt flap! "I CAN'T DEAL WITH THAT NOW!"
@xcorpeo
5 жыл бұрын
Good one hahaha. Thanks for watching
@giglepiezon0323
4 жыл бұрын
Uh butt I like the butt flap.
@aragaorj
2 жыл бұрын
Amigo! Existe um Ultra Magnus equivalente em tamanho ao MPP10 de 33cm? Eu não estou achando. Todos que vi até então são menores ou do mesmo tamanho.
@MercySaidSo_
3 жыл бұрын
At 5:30 you mentioned something about the arms not tabbing in and you did something so that it can stay in place but you didn't say exactly what you did to make the arm snap in place. I'm having that issue now but I don't see how that can be fixed. Sounds like you said you "Thicken" the tabs, what does that mean? I have another question, would you know where I could find the autobot logo for his arm?
@xcorpeo
3 жыл бұрын
yep, thicken the tabs with super glue. apply it and let it dry and cure, so the tabs catch on better. For the logo, I lucked out because I had a random decal sheet with good sizes. I still had to trim the outline to size. You might want to look at Reprolabels stickers or some decals from Uncle Billy shop on EBay.
@pjpaguia4152
5 жыл бұрын
Awesome review! By the way, what did you do to tighten the knee ratchets/joints? By any chance you have a demo? Tha k you and more power.
@xcorpeo
5 жыл бұрын
The knee ratchets are misassembled. I spoke about it in the video. For the other friction joints, a tiny drop or two or superglue would help, but I would exercise caution and keep working the joint after the glue goes in, so it won't get stuck. Happy fixing!
@BlackHoleAtron
3 ай бұрын
Awesome comparison! How did you thicken the shoulder tabs?
@xcorpeo
3 ай бұрын
Add a layer (or more) of superglue and let it cure
@BlackHoleAtron
3 ай бұрын
@@xcorpeo Oh cool thanks! I found your channel trying to learn about THF-04, and this video was amazing!
@ryverchoy1370
5 жыл бұрын
Please explain how or what you did to thicken those shoulders nubs or pegs. Name of agent used to thicken it
@xcorpeo
5 жыл бұрын
Apply a layer of superglue and let it dry. It should harden and thicken that part
@unkle73
5 жыл бұрын
Just tweaking the problems with my figure now. How did you thicken up the tabs on the inside of the shoulder panels so they click in better?
@xcorpeo
5 жыл бұрын
I use a dab of superglue on top of the nub/tab. Make sure to let it dry and cure
Пікірлер: 66