Thank you I am from QC :) I will order for my force 1000XL
@tech_rescue_
2 жыл бұрын
That came up good mate great work.
@Kenny_B
2 жыл бұрын
Thanks mate
@lachlanf1388
2 жыл бұрын
Looks slick, keep up the videos mate love to throw them on 🍻
@Kenny_B
2 жыл бұрын
Thanks mate 🍻
@jamescheatham8255
2 жыл бұрын
Looks good Brother, I thought the same about the wheel bearings. Keep us posted.
@Kenny_B
2 жыл бұрын
Yeah definitely wouldn’t do it on a car but only doing small kms in this thing compared to that 👍🏼
@squatch70
Жыл бұрын
The stance is way better and I would bet it handles better as well. Do you know if this would put any stress on the bearings or anything else?
@dawayneduffy3509
2 жыл бұрын
Spacers are cool man 😎 I've got a set of 4 inch spacers on my Suzuki Sierra & it drove way much better it makes it so much more stable. I put them on after I rolled it . I know you shouldn't be them on but it just works & easier than new wide diffs.
@Kenny_B
2 жыл бұрын
Wow! I though the 2” ones were thick. 4” sound epic 😂
@MatrixSysTechftw
2 жыл бұрын
Nice. Mine is a 21 uforce 1000 with 30x10 tires so I did 2 inch in rear and 1.5 in front with perfex 2 inch lift. Definitely like it alot better also got rid of the sway bar way better trail riding
@Kenny_B
2 жыл бұрын
How does it go with the 30” tires? Is the belt holding up ok? That’s gonna be one of my next mods. Either 29’s or 30’s
@MatrixSysTechftw
2 жыл бұрын
@@Kenny_B does great. I reclocked secondary clutch to c1 and put a gboost badass belt on.
@stevencarter7999
2 жыл бұрын
Lift and spacers completely changes the attitude of the rig .
@Kenny_B
2 жыл бұрын
Hopefully my flares live a little longer now 😂
@QIKRX4
2 жыл бұрын
They look great Kenny. How soon before we hit the trails again to test em out? 😬
@Kenny_B
2 жыл бұрын
Next weekend ☺️
@laszloschuster6964
Жыл бұрын
Kenny did you go 2" on front and back or did you use 1.5 on the front and 2 on the back. I just bought my UForce 1000 and the Perfex Industries guys recommended 1.5 on the front and 2 on the back as the back wheels seem to be tucked in more...
@Kenny_B
Жыл бұрын
Hey mate, I went 2” all round
@FelixRme
Жыл бұрын
Have you had any bearing issues with the 2" spacers? I'm considering getting some, not sure if I'm going 2" or 1-1/2". Thank you!
@Kenny_B
Жыл бұрын
I have only had them on for a few months but no issues so far 👍🏼
@ethanrapmund2329
11 ай бұрын
How’s the spacers, lift and wheel bearings going?
@Kenny_B
11 ай бұрын
Hey mate, still going good. No wheel bearing issues so far. The wider track and extra clearance makes a noticeable difference in deep ruts 👍🏼
@shanelabuff7457
4 ай бұрын
Have an update on your wheel bearings?
@Kenny_B
4 ай бұрын
Zero issues so far mate 👍🏼
@shanelabuff7457
4 ай бұрын
@@Kenny_B thank you sir. Ordered them
@matttroiano6796
2 жыл бұрын
What are you running for rock sliders?
@Kenny_B
2 жыл бұрын
Hey mate, they are just stock CF Moto factory ones. They are pretty flimsy to be honest but better than nothing. I’m going to build a stronger set for it in the next few months 👍🏼
@matttroiano6796
2 жыл бұрын
@@Kenny_B awesome I think I am going to go with the rival rock sliders then thanks 👍
@know_lesclutch8567
5 ай бұрын
Does one order come with two? Or do you need to order 4?
@Kenny_B
5 ай бұрын
They come as pairs 👍🏼bought 2 sets.
@know_lesclutch8567
5 ай бұрын
@@Kenny_B Thank you for the reply and the great video
@jrobson7826
2 жыл бұрын
Wheel bearings are shit on sxs,definitelykeep an eye on them, I've got a 2021 canam maverick and both front bearings are rooted at 1500ks old, never been through water either.
Пікірлер: 35