Well will it hold up? These older Hondas all have this same problem. Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!
@FreedomInc
3 жыл бұрын
Gorilla glue? Come on. Seriously. Man take it to a shop and have the crack drilled and tig welded. If not it will only continue to crack all the way around the pipe with the vibration.
@2vintage
3 жыл бұрын
@@FreedomInc it was for testing purposes. I'm going to see how it holds up after the first ride.
@JoJo-uv2is
3 жыл бұрын
Oil looks like caramel
@samberkovich4787
3 жыл бұрын
Quick question where did you get your ultrasonic cleaner and what type is it🙈
@FreedomInc
3 жыл бұрын
@@2vintage one ride it may last. Once cracks start in alloys the onky thing that will stop the crack is drilling both ends and welding it. Even if you were to weld the crack,the base crack would continue. It has to be drilled at both ends. This completely stops the linear crack. Then have it tig welded as the repair. The coating will be destroyed from having to sand. It down. But,its fixed right. If tou choose to fix it right take it to someone with a reputation. Since base metals must be properly cleaned pipes can be an issue for the novice with all of the residues on the inside of the pipe. It can be mitigated by someone who knows what they are doing. If nkt the crack will continue around the entire diameter of the pipe depending on how It was originally built.Good luck.
@yunusy5545
3 жыл бұрын
How can you possibly think that superglue belongs on an exhaust pipe lol
@royhenson3379
3 жыл бұрын
Hell Yeah, I love watching 2 stroke videos in the morning.... 2 strokes for life...
@boogiekush9391
3 жыл бұрын
All day everyday 🙌🏾
@Clean_JamProductions
3 жыл бұрын
I don't like having a chainsaw motor running my bike so idk 4 stroke or 3 stroke personally
@dirtbiked8846
3 жыл бұрын
This makes me wanna get a two stroke even tho I’m more of a four stroke guy.
@boogiekush9391
3 жыл бұрын
All personal opinions I think it's whatever you have more fun on , 4 strokes are definitely easier and more fun at sometimes, it's the power band and the sound that I can't get enough of that's why I'm a 2 stroke guy
@2clappedout477
3 жыл бұрын
@@Clean_JamProductions lol
@TheHomePros6221
3 жыл бұрын
Buy a roll of gasket material to make your own gaskets i use it all the time
@RcOffroad9513
3 жыл бұрын
I love this channel! I used to rebuild dirt bikes when I was a kid, still do occasionally. Cool stuff!
@RagdollRacingInc
3 жыл бұрын
Lovin' the two strokes Joe
@Brandonp95
3 жыл бұрын
You’ll use a whole can of WD-40 to clean some plastics off, but when it comes to brake cleaner that only gets a couple squirts 😂
@ianmangham4570
3 жыл бұрын
Wd40 puts a protective layer on so dirt doesn't stick,brake fluid puts Fkn holes in clothes
@codenamenoob4973
3 жыл бұрын
@@ianmangham4570 wd40 dries off just as quick as you put it on 😂
@ianmangham4570
3 жыл бұрын
@@codenamenoob4973 😗
@bxnme46
3 жыл бұрын
Oil based wd protects. Brake cleaner removes, common sense shit.
@ChickenParm152
3 жыл бұрын
stingy joe strikes again!
@evannewton3104
3 жыл бұрын
That PSI pipe is badass man, I love my 01 cr250r so much I'm building a second one from the frame up in my one bedroom apartment Love what you do man it really gave me the drive to take on my first project bike
@swully-ol4lx
3 жыл бұрын
there is nothing better than waking up and seeing that there is a video from joe waiting for me,a cup of Joe and Joe now thats how I start my morning. 😀
@supertedogpriken
3 жыл бұрын
you know what they both have in common: Both make for a great shit show.
@bradysmith5969
3 жыл бұрын
Good job on this project when I started watching your vids it inspired me to start fixing old snowmobiles and other stuff thank you so much
@DirtbikeNb
3 жыл бұрын
You uploaded as I’m lighting a blunt. Perfect timing, thanks dude
@JC-db4ih
3 жыл бұрын
Enjoy
@lukashenriksson4387
3 жыл бұрын
Same
@RagdollRacingInc
3 жыл бұрын
Drug's are bad mmmmmmkay
@BlueOval-uf6fg
3 жыл бұрын
Bragging about destroying your health. Genius
@LordOfTheDabz
3 жыл бұрын
Wake n bake aswell 2 dis
@jonnyonwheels
3 жыл бұрын
I have made many a gaskets out of cereal box cardboard....sometimes you gotta do what you gotta do while you’re waiting for parts!
@supertedogpriken
3 жыл бұрын
Or just buy a roll of gasket material to make your own gaskets from your local hardvere store. But doing things the right way is not this guy`s way of doing things...
@chadhobart4839
3 жыл бұрын
Automotive antifreeze not made for dirt bikes it causes all that corrosion. Should be running a coolant specifically designed for aluminum such as engine ice that regular coolant over long time will do it every time I would be changing the coolant and all of your stuff
@warrenzevonsangryghost6055
3 жыл бұрын
Yeah, I saw the green stuff and said 'Nope!'. Also, why wasn't the cover cleaned before adding the epoxy? 15 minutes max! Better yet, I know some great aluminum welders that could handle it (unless that cover is magnesium...?)
@mattridge5986
3 жыл бұрын
Very cool. My first road bike in the UK was an MTX80 then moved up to the MTX125. had a big bore kit on it. Loved it...
@Stratos53100
3 жыл бұрын
Congrats, I remember these, Was my dream bike back when it came out, i still have the Original sales brochure in Mint condition, when those bikes were spotless of course, they looked so awesome, i was not aware of how sketchy the coolant issues were. Great job.. Gotta love the Revs & Sound of the 2 strokes, The 4 strokes these days are not the same, even though they are larger. i had a mid 80's early KDX Non water cooled. 1st set ive seen from your channel, it brings back memories.
@2strokesforlife
3 жыл бұрын
Just got done doing this to my 86 If you can find a case off a 90-91 cr250 it will bolt right up then you don’t have to deal with Magnesium rot anymore and you also get more oil capacity and a removable clutch cover new cases can still be found on Rocky Mountain or eBay
@978twostrokegarage2
3 жыл бұрын
It’s a keeper Joe 👍🏻🔥🤟🏻
@riprodfarmer5530
3 жыл бұрын
these videos are awesome,KEEPITUP2VINTAGE!
@Codyjames83
3 жыл бұрын
Get yourself some gasket material at a Napa or auto store nice to have around works just as good as factory an it's always great for back up
@davidly5793
2 жыл бұрын
I descover you chanel a couole weeks ago. I got my self 2 old dirt bikes a kdx80 83 and a cr80r 84 as new projects. I love your content!
@bigcaputo09
3 жыл бұрын
The 250 really looks like it runs great!! I really wish you didn't get any epoxy on the water pump seal though. The seal need to flex in the middle Around the shaft to keep it sealed. That's why most seals have the spring behind them! This bike brings back so many memories!!!!
@elislifestyle3600
3 жыл бұрын
Dude I have Been a fan for 3 years I love what you are doing man keep it up joe💪👍
@maverickbeezley1311
3 жыл бұрын
the best dirtbike restoring channel
@charlestaylor3434
3 жыл бұрын
Bwaaaaaaaaaaaaa🤣🤣🤣🤣🤣🤣
@domcycled3504
3 жыл бұрын
It would be epic if Joe could find an old Elsinore from the 70's
@2vintage
3 жыл бұрын
I would love to
@riprodfarmer5530
3 жыл бұрын
or like an mt250
@riprodfarmer5530
3 жыл бұрын
what would be even more awesome would be a yz360,that would be awesome!
@lottiecooper609
3 жыл бұрын
Elsinore 175!!!
@jasonpetrich4141
3 жыл бұрын
I would rather see him find a 250 bulltaco!!!! .my dad had one it the 70's. And a kawi green streak. I was so afraid of them when he started them. Sooooooo loud. But I learn to love them. We have had probably about 200 altogether though out the years half of them are honda's and Yami, with few special and a couple kawi's
@noahmiller8643
3 жыл бұрын
2v back with another banger
@DarrenShinn
Жыл бұрын
I have to say the way you tap and dyed the 85 was just great. After seeing this job wow, wish he had ur idea! Lol
@titletownclowns1545
3 жыл бұрын
Hey Joe, By putting the epoxy in the seal it won't flex and is solid now destroyed, the hole you filled is a weep hole. The oil will be clear until the seal burns up and with no weep hole it will push into the cases. Not hating just educating. Pops
@charlestaylor3434
3 жыл бұрын
Absolutely correct sir!
@did_that_hurt8387
3 жыл бұрын
I thought gorilla glue was only good for hair :)
@Stratos53100
3 жыл бұрын
Lol, Yeah those Idiots, Yes i said it... Are Stupid to do that.....End of story...
@tomalealso
2 жыл бұрын
cool bike, I ride a 85 400 maico that we built from the ground up, the thing is scary fast but I love it.
@Logoskates24
3 жыл бұрын
Where’s the death trap banshee ? You gotta ride that thing atleast once my dude .
@bozobuiltit
3 жыл бұрын
its right in the vid look close n youll see it next to him
@joonaazzz_7279
3 жыл бұрын
The taiwan ones actually come really fast! I've ordered one for a -89 CR500, took two weeks to get to Finland. I also ordered one for my -83 YZ125 7 days ago and it arrived yesterday
@2vintage
3 жыл бұрын
Good to know! Thanks!
@joonaazzz_7279
3 жыл бұрын
@@2vintage The pitreplica ones are also good quality for the price and fit well, if u can't find one closer I hiqhly recommend getting one!
@johnpena9165
2 жыл бұрын
I owned a few 2 stroke dirt bikes with after market pipes and the only pipe that didn't give me trouble was the Pro Circuit pipe my DG and PSI pipes would crack and the welds on the mounting brackets would brake from vibrations over time.
@silsend69
3 жыл бұрын
When that thing started I was happy 😃
@deborahchesser7375
3 жыл бұрын
One thing you have to realize, the crankcase oil is only for the transmission, your fuel is what lubricates the piston and crank, so always use plenty of good two stroke oil in the fuel. Just an FYI for old Can-Am owners, leave the oil injection on the motor, there’s an oil slinger on the crank that needs that oil, they will blow up if you premix them.
@johnmcguigan2269
3 жыл бұрын
Been watching your channel for over a year now joe .its good to watch work getting done on the cr 250 john from Scotland
@barriejones9923
2 жыл бұрын
I like this channel I stumbled across it. I love my old bikes
@only_yamaha9075
3 жыл бұрын
I’m so glad I found you bro you taught me so much over just a month of time
@supertedogpriken
3 жыл бұрын
i feel sorry for you guy.... This is not the right guy to be learning from.
@only_yamaha9075
3 жыл бұрын
@@supertedogpriken whatcha mean
@supertedogpriken
3 жыл бұрын
@@only_yamaha9075 The way this guy is "fixing" stuff is the wrong way of doing it. His ways usaly does more harm to the bikes then a permenent fix. Just like in his last video. He started up the bike and let it run for 20+ minutes with no oil. only a litle coolent. ALL bearings inside the engine is now junk. Yes they will hold up for a few rides(top speed run and selling it to the next guy) And then the poor guy that buys that bike will have a total engine failure within a couple of houers of riding. And all that JB wield on the wather pump is the worst way of "fixing" it. Should have had it wielded or aluminium brased. And superglue on the exhaust is just stupid. it would hold up for a short ride or two, but 10-20 minutes of riding and it will fall off. And this guy has had hundreds of bikes so he should have learned to fix things correctly, but no. If you want some one to learn dirtbikes from you should watch guys like: Highlandcycles or Cameron Niemela. Those two guys are pro`s at fixing dirtbikes.
@codenamenoob4973
3 жыл бұрын
@@only_yamaha9075 God help you 😂
@braydon9275
3 жыл бұрын
First video I’ve watched of yours, you don’t seem like a idiot with bikes and you like 86 Honda’s like me. Definitely deserve my sub !
@BlueOval-uf6fg
3 жыл бұрын
Long live the 2 smoke
@randytorres5150
3 жыл бұрын
So many projects..... love it bro💪💪💪
@dubaitacker6347
3 жыл бұрын
i have just finished a 1984 CR500 the last of the air cooled 500's. Im sure i brought my seat cover from the states. And mate your going to struggle finding side plates, there are a few after market items which i tried and they were crap
@rustbucketrevival3186
3 жыл бұрын
That’s a sweet bike 👍
@2vintageDeamonFan
3 жыл бұрын
“Oh that phone in the back ground” lmao great video joeee
@hellyeah2299
2 жыл бұрын
You might want to buy yourself a set of hose picks. They are fairly inexpensive and they make removing stuck hoses much easier. Also they keep you from breaking off hose fittings.
@tonycerino9645
3 жыл бұрын
I have an 87 CR 125 and it's the most reliable bike I've owned. Followed close by my 86 Yz 250
@jorgeporfil9028
3 жыл бұрын
Yes and another one bad ass video's congrats great bike love it!!!!!
@supertedogpriken
3 жыл бұрын
yea this was bad, a real ass vide. What a fucking shit show this guy is puting on.....
@AlKoholic1972
3 жыл бұрын
Love the videos, and I appreciate the fact that even when you don't know how to do repairs, you get them done anyways. Please, please, learn how to check the oil in them the right way though. Shoving a wire down the hole tells you nothing except there is oil residue and what it looks like.
@2vintage
3 жыл бұрын
I put the exact amount of oil it needed i to the bike so it should be perfect. I was checking to see color of the oil not amount.
@mikekurianowicz5515
3 жыл бұрын
Race gas go to Any drag strip cam2 or turbo blue. Seat cover any upholstery shop, cut out cr on cricut spray white or red.
@gradybeaty416
3 жыл бұрын
Another one saved....hell yea...
@supertedogpriken
3 жыл бұрын
Another what is saved?? The bike in this video is NOT saved. it is hold togheter with hopes and dreams. The engine is literally glued together. And running the engine for 20+ minutes with only coolent and NO oil in his last video. The whole engine needs a rebuild and all bearings need to be changed out.Yes it could hold together for a few rides. But in less then a hour the engine is gone break dow in a BAD way.
@jaydentycholiz1309
3 жыл бұрын
18:32 when life gives you lemons 🍋😂
@11GalleryATV
3 жыл бұрын
I ordered a seat cover from Taiwan for my 1986 Honda ATC 200x build and I received it in 6 days.
@m8fusion712
3 жыл бұрын
Nice Cr250 & awesome video man
@motostuff2596
3 жыл бұрын
Cant wait till the project is finished keep up the good work
@supertedogpriken
3 жыл бұрын
this guy is NEVER gone finish a project. he is just gone meke it to the point it holds up just enough to do a top speed run, and then selling it to the next poor guy that has to deal with the shit show this guy has done....
@LeeLee-ud3li
3 жыл бұрын
Nice bike 👍👍
@juntzjoking
3 жыл бұрын
Looks like that thing is gonna be a beast!!! Good job!!
@jasonpetrich4141
3 жыл бұрын
Next time mix it on flat cardboard mixes way better, and use a popsicle stick to apply it, it works really good. 😀 she is super rough inside there but the rest of it is pretty dam clean. It also needs the ( pro link )sticker for the swingarm!!!!
@jakejames1977
3 жыл бұрын
Get yourself a radiator pressure tester at harbor freight. It connects to where the radiator cap goes and you pump it up to like 12 psi. If the pressure goes down you know for sure you have a leak. Otherwise Your just guessing like in the video.
@dustincartner9773
3 жыл бұрын
Go to DC plastics for seat cover seat foam and decals also number plates they got it all
@uriahpolite1594
3 жыл бұрын
My exhaust it cracked have no fear gorilla glue is here
@2vintage
3 жыл бұрын
Haha temporary fix so I can ride it.
@sevendyseven4090
3 жыл бұрын
@@2vintage Under 8mins (when hot) under throttle is my predict it blows off.
@uriahpolite1594
3 жыл бұрын
@@2vintage hahah your channel so deserves more subs one of my faves
@TheHomePros6221
3 жыл бұрын
Man that water pump bearing was kinda iffy, good job tho nice bike
@cadynwoods3668
3 жыл бұрын
Wheres the Custom Banshee at?
@anthonyproietti-nelson6259
3 жыл бұрын
Pour water on pallet paper if it runs off, it is gasket paper. It works pretty good.
@jrtwowheels6446
3 жыл бұрын
using regular coolant will do that after along period of time. i use ice logic coolant.
@jaredfromtheemupen7990
3 жыл бұрын
What's considered "vintage"? The thought just crossed my mind
@michaelmays9292
2 жыл бұрын
Best thing to g Do is heat up some tar, and paint it behind where the water pump propeller is. A thin coat, but Soda blast it first to bear magnesium.Never have that problem again
@mikekurianowicz5515
3 жыл бұрын
Pop that water pump bearing out, glass bead the whole case, and water pump neck, get rid of 30 year old jb weld, hit it with carb cleaner, and air. Let new seals soak in regular ATF for 2 days, they will swell. Put new jb on cases & pressure test cooling system 5lbs- 8lbs max. Resemble use ATF "NOT ENGINE OIL 10W-40"!!!!!!
@marcuslindberg8620
3 жыл бұрын
Did you break the bolt at 18:30? 😂🥵, fast cut.
@yungmike7748
3 жыл бұрын
That o fuck moment when the ratchet slipped 😂
@saideragaming
3 жыл бұрын
Joe - you the Man. :D
@sendit1158
3 жыл бұрын
Use that long funnel to drain the coolant into the jug, mite be abit easier for you, another great video buddy, i end up watching to many of your videos n never get anything done all day lol
@PearlyS10
3 жыл бұрын
This guy needs more subs
@2clappedout477
3 жыл бұрын
awesome! good job!
@sendit1158
3 жыл бұрын
JB Weld n Super Glue = new bike lol, jk good job bring er back to life
@larrywarner9314
3 жыл бұрын
Best epoxy that I found is marine Tec works great
@joshsrc1327
3 жыл бұрын
Love the video I learn so much from you thank you dude
@helplure
3 жыл бұрын
when are you gonna make a video on the 100hp quad?
@2vintage
3 жыл бұрын
I just made it. Video coming soon!
@stepbro-chase6790
3 жыл бұрын
@@2vintage nice
@outdoorbrothers8416
3 жыл бұрын
When is the next part for the mule coming out. I’ve been waiting for that.
@mikegardin3393
3 жыл бұрын
So you really think that glue is going to hold up on that pipe? HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHA, I was not aware this is a comedy channel but now I am convinced it is
@thamenace9985
3 жыл бұрын
It's a circus channel and Joe is the leading 🤡 😂😂
@averagejoeenduro1325
3 жыл бұрын
Bro, did you snap the back axel??
@mmaaddict78
3 жыл бұрын
Damn dude, it looked like something gave way 😂
@michaeltrower6792
3 жыл бұрын
It was probably the ratchet that broke 🤣
@mmaaddict78
3 жыл бұрын
He’s using those German torque specs, good ‘n tight lol
@TimArmbruster
3 жыл бұрын
You could probably just put a new number plate graphics on and it would cover the stratches, if you can't find a number plate.
@anthonyharrison4393
3 жыл бұрын
WE WANT THE QUADDDDD...love the videos but wish you’d do one thing at a time 🤣
@c3r3bralm.f
3 жыл бұрын
That is one janky fix. Try at least soda blasting it clean , and take it to a pro welder to try and get it fixed. You literally GLUED the engine together.
@charlestaylor3434
3 жыл бұрын
Oh you must be new here lol. That's how he fixes everything
@okerhrh4139
2 жыл бұрын
@@charlestaylor3434 lololol n then resells it, selling a ticking timebomb
@thebigguy8306
Жыл бұрын
Great guitar intro, is that Vinny or Jade?
@Guttermouth-tf3yn
3 жыл бұрын
I’ve found out the tough way the only thing that truly works to fix an exhaust crack/leak is a welding or just a new exhaust. with that small of a crack you Could Problly get away with wrapping it
@makoman67
3 жыл бұрын
Super glue on an expansion chamber......🤣
@fernandomaldonado3877
3 жыл бұрын
Anymore kawaski mule videos??
@2vintage
3 жыл бұрын
Yes Friday!
@heatherlozar2167
3 жыл бұрын
I am so excited to get a dirt bike what should I get for my first ever dirtbike? I am 12
@jim-zb2kb
3 жыл бұрын
Just get whatever you can afford.probably a 85two stroke or a 125 4 stroke will be a good size
@heatherlozar2167
3 жыл бұрын
@@jim-zb2kb thank you 😊
@thequadstop8873
2 жыл бұрын
JB Weld and Gorilla glue apparently
@vwsandvettes3253
3 жыл бұрын
Do you still have the 1980 basket case cr250? Did you ever get the shocks for it and are you able to do a ride video on it? The '80s CRs are my favorite MX bikes. thanks!
@gtisid
3 жыл бұрын
gotta put a mig or tig weld either end of that cracked exhaust or it’s just gonna get bigger .never seen gorilla glue stick anything but clothing and fingers
@tylertravels5021
3 жыл бұрын
Love the content
@makuru3395
3 жыл бұрын
This engine is a 2 stroke, oil is only in the gearbox. The engine is lubricated by adding oil to the fuel
@1stafterhundred553
3 жыл бұрын
You should make an intro for the channel, I think It would add a lot to this channel!
@mikestowe6136
3 жыл бұрын
i wanna know how many epiodes the cardboad has made it threw lol
@coltstacey6000
3 жыл бұрын
Look on dcvmx plastics.com they have anything from seat covers to oem parts to graphics to plastics all for older bikes
Пікірлер: 313