The USB plug that offers touch actually powers the unit as well (5v red pin/black pin, touch is the green/yellow wires). The GPIO power cable is redundant and NOT needed to power the screen. You only need that USB plug, and the HDMI ribbon cable. This frees up your GPIO for an ICE cooler running at 5v.
@ramalingamsriram6596
4 жыл бұрын
dude i am sending this comment through the same IPS display
@bluedeath996
4 жыл бұрын
I have had mine for about a year.
@frenkicekaj8134
3 жыл бұрын
Lol
@vickyboi1200
3 жыл бұрын
bruh i was skeptical if it worked b4 seeing this comment lol
@marcusosland-rong3036
3 жыл бұрын
Not sure if you will see this, but does the pi power the screen? Like is it possible to use one cable to power both the pi and the display?
@Roamer145
4 жыл бұрын
I have one of these screens and LOVE it. Highly recommend for Pi projects that need screens.
@SweatyCubes
2 жыл бұрын
What screen is this? It has no brand name or proper link.
@megalee3239
2 жыл бұрын
@@SweatyCubes This is Lebula 7'' touchscreen monitor
@andikunar7183
4 жыл бұрын
Have the same and am very happy with it. I love the clean connections to the PI (in my case also a PI4B), nothing standing off the edges for connection. Unlike the other 7", higher than 800x480 (MIPI-interface) resolution displays. I'm also using it with a X735 for power-mgmt and cooling, works great.
@srinu57
3 жыл бұрын
Is it available in India?
@jeanlaurentkamgaing2138
2 жыл бұрын
Hi sir, i am probably missing something. How do you search for this specific screen as there is no brand? I have watched the video several times but nothing helps. Could you please send me the link to the product? Thank you.
@megalee3239
2 жыл бұрын
@@jeanlaurentkamgaing2138 This is Lebula 7'' touchscreen monitor
@boredfish80
3 ай бұрын
Hey! I get that this is a (relatively speaking) old video and things have moved on a bit, but I'm wondering if there are any recommended equivalents in 2024? UK-based. The key points for me: - The rear mounting, so that the cables etc are behind and not poking 20 miles out of the side/top/bottom. The best I've got so far (at 5 or 7 inch display size) was top-mounted connections and the display included a HDMI "U" adapter. Not bad, but still extended beyond the profile of the PCB the thing was mounted on. - Still cheap enough to be considered "project level" - but not complete rubbish. It'd be for a RetroPie project. - I don't care about touchscreen.
@karsten4395
2 жыл бұрын
Absolutely fantastic! This is the perfect screen for my planned project: A multi-audio player (MP3, FLAC from SSD / Internet-Radio / CD) with a PI4B connected to a HiFi Stereo Amplifier :-)
@JerziTBoss
4 жыл бұрын
This would be great screen for raspberry pi mini-laptop... Top of the laptop would be raspberry pi and that would help with cooling and bottom part would be the keyboard and battery and probably touchpad maybe even ssd in some shape or form. It's a shame that I don't have a 3D printer so that project is in "Maybe in the future" projects.
@Richie016
4 жыл бұрын
Working on small form factor systems like rpi-4 with a 7" display is an effecient model of computing.
@MichaelAngeloTech
4 жыл бұрын
I have two of these running portable battery powered Retropie consoles with VMan’s image. They are excellent. Two things to add: There is a physical button for volume control and it works fine. So the volume is controllable through both hardware and software. It is the up button. Hit that once and then you can use the up/down buttons to change volume. The GPIO cable connection is not required with the latest versions of the screen supporting power through the same USB plug ETA used to “enable touch”. That port also provides power through the Pi to the screen. As long as you feed the Pi with a good power source it works excellent.
@iljacoveliers5834
3 жыл бұрын
It works excellent, but only for 12-13 min. then the screen colors start flickering ( playing N64 ) So if a Charmast Power Bank 10400mah with 3A outputs isn't enough, which power bank will ?
@pilabs3206
4 жыл бұрын
Oka! It's time to add a touch oriented theme for TwisterOS.
@fred-youtube
4 жыл бұрын
Twister 1.9!!!
@Moukrea
4 жыл бұрын
The very same thing with 720/1080p resolution would be so neat!
@SOSAXP7
4 жыл бұрын
You did not do a screen tearing test? Sound Loudness test or test any Roms???
@TheOleHermit
4 жыл бұрын
Buyers beware, this looks nearly identical to my EVICIV 7" touchscreen, purchased a year ago. It also has the RPi logo on startup. Except mine didn't ship with the assorted cables and doesn't have the cool power and USB headers, so I wasted money trying to find cables that didn't stick out so far, but they still do. :-( Furthermore, although the EVICIV looks the same as the Longrunner 7" touchscreen and enclosure, their protective enclosure requires serious modifications in order to fit the EVICIV touchscreen. |:{ To be clear, I'm not saying that this touchscreen has the same issues, because I don't know. The cabling is much cleaner on this model. I'm only suggesting that you may want to consider how important the enclosure is and whether one is available. I wish that I had purchased both as a package deal. Having said that, the touchscreen works great. Although it is only rated @1200 x 600, it displays 1920 x 1080 just fine alongside my 50" 4K TV. I suspect the same is true with this model. I'm running my RPi4 with a heat sink & small PWM fan, which is also powered via GPIO. Whenever I power the RPi, USB SSD, fan, & touchscreen from the same wall wart adapter, sometimes the RPi complains about low power by displaying the lightning bolt, usually during high SSD activity. So, I turn off the 7" display and use only the 4K TV (no problem). You gets whatchya pays fer.
@16bitsorhigher
4 жыл бұрын
I have the exact same display but mine did come with a few adapters just not the one that goes from USB to pins on the display to enable touchscreen. They did include one that goes from USB to micro USB but the connection doesn't look as sharp as the one on this video.
@alexmcd378
4 жыл бұрын
Been tempted by similar 7 inch screens for a while. In the end, I opted for the NexDock. much tidier solution for me, but pricy.
@martinantelo7086
4 жыл бұрын
Wish they would do a version of those screens with 4:3 resolutions like 1024x768 or 1280x960. It would be perfect to play shmups in TATE mode.
@W1ldTangent
4 жыл бұрын
Bring back 16:10!
@Colin_Ames
4 жыл бұрын
Good review of what looks to be a well thought out product.
@edrumsense
3 жыл бұрын
6:21 This seems to be actually a 1024x600 scaled up to 1920x1080 via software.
@Slydog43UTube
4 жыл бұрын
damn, I just bought the 5" screen from one of your last videos.
@PyricDemon
2 жыл бұрын
I’m seeing the screen has screw holes for a backing, might design something so you can put a fan on it and hold it at the same time.
@alhassen_kh
4 жыл бұрын
Annnnnd find a 13 inch new we always want more
@briantooze3415
4 жыл бұрын
Great Video. Can you fit a fan to the Pi when it is mounted on the display?
@DigitalJedi
4 жыл бұрын
Cpu seems to be facing away from the screen, so height of the cooler shouldn't be much of an issue. If the mounting screws you use are too long to allow it to mount to the screen directly, I'd image a solution with standoffs or washers + longer screws would work decently.
@mikaelisaksson8907
4 жыл бұрын
Power to the pi-ple!
@franksmith7271
2 жыл бұрын
I wonder if it could be used with the lilygo rs2040, there's no obvious video out, but it would sure be fun to (try to) make it work.
@angieCity90
3 жыл бұрын
I have this exact kit that I bought but it did not include some of the extra items ! Would have been so helpful! Lol
@Sithhy
4 жыл бұрын
Would like to see this with a Windows/Linux laptop or a phone like the Galaxy S10 just for Dex
@diegui3926
3 жыл бұрын
Hi there, was about to ask the same, @ETAPrime can you please give a try to those USBC-to-HDMI cheap adaptors with a Samsung mobile?
@bm5906
4 жыл бұрын
please make your next touchscreen RPi 4 be for a 1920x1080 screen, or a sub $20 1280x720 screen.
@tschak909
4 жыл бұрын
Are we EVER going to get a better DSI display?
@doublegdawg
3 жыл бұрын
DSI displays are limited to 800x480 resolution, as far as I'm aware.
@tschak909
3 жыл бұрын
@@doublegdawg a single DSI channel, yes. You can put more channels in parallel, which is precisely what larger displays do.
@fiebie9864
4 жыл бұрын
Nice, and now please find a screen that is bigger 10 inch and more... i didnt find it :-(
@yingit7349
2 жыл бұрын
Can i put this inside my pc and put a wallpaper on it for decoration?
@TheRedRanger199
3 жыл бұрын
just wondering, if I were to use a pi zero w with headers would the monitor still be powered by the pi once I connect everything?
@a-team65
3 жыл бұрын
I really wish someone would answer this LOL
@markallen2536
2 жыл бұрын
I have the same screen but need to flip the image right to left. Top to bottom is ok. How can I flip the image?
@JohnVella1968
4 жыл бұрын
An android video would be great, please. 😀
@mistervaso
Жыл бұрын
Question. I am installing this as a dashboard for my car and will not have access to the Power, Menu Exit, Up and Down Button. Can Raspberry Pi turn the screen on and off? Also would you know of an option the access the menu using the touch screen vs the buttons? Thank you in advance.
@MrDavidBFoster
4 жыл бұрын
3A @ 5V is barely enough for a Pi 4, never mind the screen. Other than that, it looks like a pretty good deal, especially with all the connectivity options.
@MrDavidBFoster
4 жыл бұрын
NOTE: It doesn't come with a Mini HDMI for the Pi Zero. But, who cares, right?!
@iljacoveliers5834
3 жыл бұрын
A Charmast 10400mah power bank with 3A outputs connected to my Pi 4B is looking good at first, but after 12-13 minutes of N64, the colors of the screen start flickering. Weird that if the screen suddenly isn't getting enough power, why doesn't the flickering start from the beginning when you boot up the pi ?
@MrDavidBFoster
3 жыл бұрын
@@iljacoveliers5834 The short answer: heat=resistance.
@iljacoveliers5834
3 жыл бұрын
@@MrDavidBFoster So if the Pi stays cool, it will work ? But with the official adapter I've tested for 20 minutes, no issue whatsoever, I would think it doesn't matter for the Pi what power source it is, the temperature of the Pi would be the same. Maybe even a bit higher after 20 minutes.
@SonicLoveEmulation
3 жыл бұрын
Hi ETA prime I take it I can split the power wires and solder the ice tower power to the same pins for power so the screen and the ice tower together?
@BlackSmithWolves
Жыл бұрын
the product shown in this video and the link to Amazon are not the same wtf
@onkelnb
4 жыл бұрын
Now we need a fitting case kit with battery pack, game controllers on the left and right and we have a Switch-Pi.
@dividion8102
4 жыл бұрын
I was hoping to see you run the tearing test like you did with the 5in screen: kzitem.info/news/bejne/2Zmt132usoV3g5w You even stated in that video that "whenever I get a new screen for the raspberry pi I always check out this video on youtube". I wanted to pull the trigger on this, especially since Amazon has a $10 coupon currently, but I suspect it has some unpleasant tearing, which contributed to this being a "great" device rather than warranting the "awesome" rating. Plus, you even mentioned at 7:58 that changing the brightness doesn't introduce any extra screen tearing than you'd normally see on a screen with the Raspberry Pi given the drivers... That doesn't inspire much confidence.
@aoneblood
4 жыл бұрын
Wow this is exactly what I was looking for. Would be perfect with a 3d printed cover with Bluetooth controllers connected to the sides. A+
@sightline4004
2 жыл бұрын
Your Amazon links are wrong. For anybody watching it's the Lebula 7" 4 month update: now it's "ROADOM"
@Hockeybro42
8 ай бұрын
I don’t know why they keep changing there brand name
@cjscarchannel6529
4 жыл бұрын
I picked up this Screen probably 6 months ago. So happy with it, im going to Run it in my car, mounted in a Double Din Adapter, Customised naturally.
@nickhenley8040
4 жыл бұрын
Christopher Curwen this was an idea i was going for as well. I hope it is sunlight readable.
@cjscarchannel6529
4 жыл бұрын
@@nickhenley8040worst case you can buy Matte Screen filters. so not the end of the world :)
@_SonOfPear_
3 жыл бұрын
Hey fella, I'm hoping to do the same. I was wondering, do you need to have access to the power/menu buttons on the back of the screen, or will it power on with the PI?
@cjscarchannel6529
3 жыл бұрын
@@_SonOfPear_ powers on with the pi. the controls on the back are pretty much pointless
@SweatyCubes
2 жыл бұрын
What screen is this? It has no brand name or proper link.
@prabhaakarsundararaj189
2 жыл бұрын
Link of the product pls Mentioned links are not working Showing different product
@Don-lo9di
4 жыл бұрын
I have had one of them for abut 30 days and love it; Im useing it in my car with androud 10 as a gps.
@stirch9
4 жыл бұрын
Have you seen the PiDash setups? They are pretty cool.
@DigitalJedi
4 жыл бұрын
That's actually a really neat use for it.
@W1ldTangent
4 жыл бұрын
That's awesome, I was going to comment that this looks like the perfect base for a DIY head-unit.
@Don-lo9di
3 жыл бұрын
Jay Private I have the mew firmware you have to use the sd card. On usb it boots but locks up. I’m yawing android 11.
@RestoreTechnique
Жыл бұрын
I bought a very similar monitor to this, but it has a wheel for brightness and volume which is really nice and simple. But the resolution is just too low (especially with onscreen text and icons), and the aspect ratio is bad for a lot of modern content. Playstation 4 games only take up the middle 60% of the screen. I'm going to sell this one and get a 1280x800 screen.
@y4lnux
4 жыл бұрын
What can I said I'm a newbie in This Raspberry Pi world , thanks to your videos I bought my first RPi, that just arrived Yesterday
@maxjosephwheeler
4 жыл бұрын
I'm totally putting this in my truck.... Lol
@vfletes1
4 жыл бұрын
There it is ETA big bunny prime... Its not an ETA vid without the big bunny.
@W1ldTangent
4 жыл бұрын
I've seen big bunny on so many screens now I can use it as a decent benchmark... I know how it *should* look, and can spot a poor display pretty quickly. It's just convenient for KZitem content because it's freely licensed, no copyright to worry about. Same idea with 3D printers and that tugboat... everyone is familiar with it, and it does a good job of exposing poor designs.
@AhmadFarzadTaquee
11 ай бұрын
Can you give me the link, the link you gave directs me to something else
@restrelax6282
4 жыл бұрын
I ordered this thing literally 3 days ago and then you come out with a video talking about it before it’s been delivered. Pretty convenient lol
@N3M3S1S357
4 жыл бұрын
Really been wanting a kitchen media device for playing youtube and such while cooking or even to look up things while you're in there. This might be perfect built into a cabinet or something. Might give it a go.
@aarongilly
2 жыл бұрын
I'd like to get this, but.... the Amazon link is pointed to the wrong product... and interestingly there is no reference to the name of this or its manufacturer anywhere in the video.
@mrshaheedmalik
Жыл бұрын
Uperfect is the brand.
@nasif3173
4 жыл бұрын
Can you please tell the measurements by putting a scale beside it. For example it is a 7 inch screen. Height=x Length=y Width=z
@digitalmediafan
4 жыл бұрын
Where to buy in the UK please ? Awesome review and product
@unloveableandre
4 жыл бұрын
I bought one this week after seeing your video. Actually I had the 5" in my cart, then I looked for your video and I see this one. Anyway, the only issue I have and you didn't show how you fixed it, it's the power connection (USB C). The plug position is a little awkward, and gets in the way of the feet. Or it will be always showing in the front of the device. Solution would be a short plug USB C, a very flexible one or a L shaped plug. How did you do?
@VinodKuwar
4 жыл бұрын
Same issue here, please if you find solution do update here.
@brandon3219
3 жыл бұрын
Also same issue, surprised the video glossed over it. Good video otherwise
@VinodKuwar
3 жыл бұрын
@@brandon3219 i bought L type connector from Amazon for $5 (two) that solved problem
@SweatyCubes
2 жыл бұрын
What screen is this? It has no brand name or proper link.
@hybrdthry911
3 жыл бұрын
Does the screen turn on when it is powered or do you need to physically press the power button? Planning on mounting the display so button may not be available after installation.
@christophertodd6405
3 жыл бұрын
If this was mounted so the control buttons on the back, such as power aren't accessible, is there another way to power it up or make those adjustments?
@indobleh
3 жыл бұрын
I want to add Geekworm Raspberry Pi 4 X862 M.2 NGFF 2280/2260/2242/2230 SATA SSD Storage Expansion Board is it possible to fit it all onto the back of this monitor?
@MorningsideSanitariumVideos
3 жыл бұрын
Anyone have any ideas why this exact screen would stop responding to touch when it boots up with something plugged into another USB port? If I unplug it, then restart, touch works. Start it up with anything plugged into the usb, no touch. Otherwise, this video helped me hook it up properly!
@sacolbert
4 жыл бұрын
This may be the screen I get. I do have one question: How would you add active cooling with this setup? Like an ICE Tower?
@tylergarrison9230
4 жыл бұрын
Stephen Colbert I have the same screen and added a argon pi hat, never gets above 55 degrees running overclocked and doesn’t add any extra height to the pi.
@narendranbhaskar
4 жыл бұрын
Buy a netbook?
@lst3044
4 жыл бұрын
The ice tower fits great on the back keeps it nice and kool stays at 30 c idle
@fred-youtube
4 жыл бұрын
It just attaches to the Pi on the back lol
@16bitsorhigher
4 жыл бұрын
There is another problem when adding active cooling. When you plug the power on the display to the GPIO on the Pi 4, you are only left with 3v power coming out of the Pi. I have the same display and I purchased a small fan that ETA Prime recommends on the video of the 5" display that attaches to the heatsink that goes on top of CPU but when I plugged to 3v power I get an under voltage warning on the Pi 4. I'm new playing around with Pi 4's so there's probably a quick fix. I just haven't found it. Maybe by adding a power management hat or something.
@Brussington
4 жыл бұрын
This is why I love this channel. I’m gonna look for a case that might support this. I may need to print one myself. Regardless, this is a game changer in every field the Pi dwells in. Thank you again for this video!
@doublegdawg
3 жыл бұрын
Any luck finding a case for this screen?
@amirnursamidan9785
3 жыл бұрын
can try with BMO nintendo switch stand
@megalee3239
2 жыл бұрын
@@adiands850 You can write to Lebula customer service, perhaps they'll help.
@megalee3239
2 жыл бұрын
@@doublegdawg You can write to Lebula customer service, perhaps they'll help.
@Shhimhiding
4 жыл бұрын
I have this screen. You can power the screen through the USB ports on the pi, you do not have ego use the GPIO port so it allows you to attach a cooler. Also the speaker volume can be controlled through the screen buttons, but it’s hidden in the menu.
@SweatyCubes
2 жыл бұрын
What screen is this? It has no brand name or proper link.
@megalee3239
2 жыл бұрын
@@SweatyCubes This is Lebula 7'' touchscreen monitor
@charlesmarseille123
2 жыл бұрын
UPDATE: Link is dead, screen seems not available anymore.
@megalee3239
2 жыл бұрын
This is Lebula 7'' touchscreen monitor
@NeoTechni
4 жыл бұрын
> 1024x600 God damn it. Are none of these 720? Portable LCDs are all sub 720p, then they skip over it straight to 1080p and 4k. I just want 720p!
@frederickswartz5508
12 күн бұрын
I believe i have it all connected, touch still will not work. Display and sound will work - just not touch. I'm guessing the touch is broken.
@IsaacAlves
3 жыл бұрын
Does it work on a Galaxy S8 through dex mode?
@muhammed-shiyas
4 жыл бұрын
Tuch screen works with kali linux? Pls reply eney one
@jdl3408
4 жыл бұрын
It should be possible. The display will work for sure, but you might have to manually install the touch driver.
@W1ldTangent
4 жыл бұрын
Can't see any reason why not, this is definitely a use-case for this display that would interest me.
@3dprintinglife
4 жыл бұрын
Definitely gonna look at making a pi laptop with this lol.
@jesser9528
2 жыл бұрын
I just got my Eviciv 7" touchscreen display for Raspberry Pi 4 8GB . I hooked it up according to the manual everything works except no sound. Is there a way I could check to see if the sound works? Any suggestions?
@iljacoveliers5834
3 жыл бұрын
Don't buy this screen, if you're going to connect this to a Pi 4B with a Power Bank ( in my case the Charmast 10400mah with 3A output ) Tried every possible connection, you name it, even powering the pi and the screen each from a separate output of the powerbank, but after 12-16 minutes of N64, the colors of the screen start flickering. No lightning Bolt, so the pi is not underpowered and no it's not a glitch of the N64, because when inside Retropie the flickering continues, even after a restart of the system. And no it's not a temperature issue, because with the official adapter I stoppped at 20min., no problem whatsoever. So if someone can recommend a power bank that works with this screen and Pi4, that would be great !!
@dlr441
4 жыл бұрын
Does anyone know where I can buy a few RPV hdmi 10cm with 22 (or 21) traces (pins)? No adaptors, just plain, flat cable with the finished ends as I already have the adaptors. Thanks.
@RudyAmid
4 жыл бұрын
Good luck finding this for $60 now that your video is out.
@budgetking2591
3 жыл бұрын
its 30 euro on aliexpress.
@PhilipLardner1967
3 жыл бұрын
@@budgetking2591 Do you have a link for this display on AliExpress? I've not found this exact model yet. Thanks.
@j.goggels9115
6 ай бұрын
Reassuring to see a product you bought online being praised by ETA Prime. Now I want to add a DAC+ with it... : /
@MobileDecay
4 жыл бұрын
The Pi 4 is running Android better than any Android tablet I've ever used. Lmfao!
@JDWatkins
3 жыл бұрын
I am legally blind, do I have an odd request. Is it possible to convert my old Samsung Galaxy NotePRO 12.2" tablet screen for use on a Pi 4? If so, what would I need to pick up? The tablet is pretty useless as a tablet, hate to toss it as tge screen is pretty nice. Can you do a video on repurposing tablet screens???
@XFI1
2 жыл бұрын
Hi I am using the same setup. Using the ribbon fpc micro hdmi cable but I can’t get the sound out from the built in speakers. Using raspian OS and right clicking the speaker icon there isn’t any option for hdmi and there is only audio jack. Tried tinkering the config.txt file but to no avail. Any idea on this issue.
@Buckbuster88
3 жыл бұрын
So mine is connected and powers on but says, No Input Signal and can't get the menu to display. Do I have to have an operating system installed on the Pi to get the menu to display?
@bigdmc6459
Жыл бұрын
Hi there. Do you know where I can find the speaker plug in sockets. My screen came with cable just soldered onto the board I’d like to add then for ease of use. Thank you.
@BlobBlobkins
2 жыл бұрын
Can I use it as a second screen for the laptop? Can it be powered only with hdmi or type-c? I don't want two cables sticking from laptop, can it be used with one cable?
@Lamar-jw4id
6 ай бұрын
The link provided for this product is not the same product shown in the video. Can you provide the link / update the link for this product?
@nikhildeshmukh6851
4 жыл бұрын
My phone display is broken.. And it's touch screen is now stop responding.. This phone does support Usb OTG But it's micro usb 2.0 not type c Can I use this phone with external display So I still can use my phone.
@felixu95
4 жыл бұрын
Probably not. You will not be able to get a display output over USB 2.0, there simply is not enough bandwidth. Your best bet is probably getting your screen repaired if you can find a replacement screen for cheap.
@MaxMax-dq1lu
4 жыл бұрын
It actually depends on if ur phone supports it or not more than anything else.... U can get a "micro USB to mhl adaptor" for very little price. It will give u a hdmi connection. U can then try connecting it 2 any TV/device u already own b4 u spend on a dedicated screen. Hope that helps.
@nikhildeshmukh6851
4 жыл бұрын
@@felixu95 thanks! Screen replacement is not cheap for this model even now.. It's a 4yrs old Phone... 😅 Does usb 2.0 with type c support external display? If I buy one?
@nikhildeshmukh6851
4 жыл бұрын
@@MaxMax-dq1lu thank you very much Max. I did look for my phone model for that mhl support.. but sadly it's not in the list. There are very few phones model which are compatible with this feature..(mhl) And they are all old outdated models.
@MaxMax-dq1lu
4 жыл бұрын
@@nikhildeshmukh6851 No worries... Happy 2 help out... They r only a few £/$ on Amazon so might b worth a try... If not that there must b some way 2 connect it 2 a hdmi or u could try screen casting over Wi-Fi... There is always a way... Worst case scenario u'll have 2 get the screen fixed... if it's not 2 expensive... If it's a good phone it's probably worth it... even if u decide 2 sell it later...
@grabelrealestate8963
Ай бұрын
I followed all your instructions but I have a display not found error. Any help please?
@jbergamp
Жыл бұрын
Hi man Does it work with samsung dex? I appreciate your answer. Thanks
@quddusali5891
3 жыл бұрын
How to buy this display plz give me link plzzzzzzzzzzzz becouse discription link is not working
@megalee3239
2 жыл бұрын
This is Lebula 7'' touchscreen monitor
@megalee3239
2 жыл бұрын
This is Lebula 7'' touchscreen monitor
@cyberms2783
2 жыл бұрын
269$? That's crazy lol. I'd rather get an Asus screen for that kind of money
@jchaler
3 жыл бұрын
It's possible to connect this screen to a Windows Computer via HDMI and USB??
@daviddeocampo3426
3 жыл бұрын
have you ever tried this using dex? is it compatible? also with the touch
@randysmith7094
4 жыл бұрын
Holy ___!! I can buy a decent ____ing laptop for cheaper than that little screen!! Jesus ____ing Christ!!
@lusher00
2 жыл бұрын
Has anyone created a 3D model they are willing to share? I had created one, and a case... but I lost the model and I'm lazy.
@Sgtoscarcolon
3 ай бұрын
Hi please help me to enable the touchscreen. When tested it was good but a day later didn't work.
@alvind614
4 жыл бұрын
Need to 3D print a case. A small Arcade case for Arcade retro gaming.
@o_tdiggity
Жыл бұрын
The link to this screen is for a new larger display now. Anyone know if we can still buy this screen anywhere?
@moumenebenasser2840
6 ай бұрын
Can someone tell me if it's gonna work with yooyeetoo X1 or Raspberry pi 5 please?
@efrainbarrundiamorales9630
2 жыл бұрын
A ventilation tower could be added to the kiy we just saw. greetings from the Guatemala
@GeekyAlii
4 жыл бұрын
will it work with pi zero w ???
@W1ldTangent
4 жыл бұрын
Yes, but I didn't see a mini-HDMI ribbon cable in the package, only full-size and micro-HDMI, probably going to need an adapter. Unless I just didn't spot it.
@GeekyAlii
4 жыл бұрын
@@W1ldTangent thanks
@vanee911
3 жыл бұрын
How can we add fan nd heat sinks to this case, is there anyway to connect a small fan, caz rpi4 needs fan nd heat sinks, can they be installed..
@jensschroder8214
3 жыл бұрын
I have the same screen and a Pi 3B on it. You can change the volume if you press + and brightness via -. The touch screen works out of the box, but only the left mouse button. This requires one USB 2.0 port, so 3 ports remain open. The native resolution should always be set as the resolution. If you switch off the screen, the Pi continues to run. The power supply that came with my screen was unstable. So I exchanged it.
@SweatyCubes
2 жыл бұрын
What screen is this? It has no brand name or proper link.
@jstagzsr
3 жыл бұрын
I bought that same ips display.. SOMEONE HELP!!!!!!!!!!!!! Ive searched EVERYWHERE!!!! including looking up the chip pinout and trying to figure out how to fix this.... It was working perfectly fine.. It worked on windows, it worked on my rock pi, It worked with my phone, it was great... The screen and the touch both worked poerfect! Then all of a sudden one time when i turned it on it said "AV2".. aka it switched its input from input 1 to input 2, by itself, and theres no way to change it back, and theres no input 2 for me to hook up to.. so now its sitting in the box doing nothing.. SOMEONE PLEASE TELL ME HOW TO FIX IT!!!!!!!!!!!!
@Kydenius
3 жыл бұрын
Do you have both the normal HDMI cable and the Black FPC cable connected? (The one that uses HDMI or Micro HDMI to the back of the screen) Only one cable should be connected, ether the FPC (Rasberry hdmi- back of the screen) or via the HDMI port from the screen to the Rasberry. Don't use both of the video outputs at the same time If that wasn't the case, do the buttons do anything at the back if you have the screen and Rasberry powered? If you can use them, go to setup > Signal Source > (change it to whatever you have, probably HDMI)
@johnnydepp4546
3 жыл бұрын
hi what do you have to write in twister os for 7 inch display config .data that it shows what? thanks in advance
@BreakingElegance
2 жыл бұрын
might be a little over kill for klipperscreen for a 3d printer i think lol
@ryanwakebradtelle8682
3 жыл бұрын
Can u make a video attempting to make a sub $100 pie handheld that's solder free
Пікірлер: 499