This is the best example I've seen, very simple - thank you!
@rogerhook8002
8 ай бұрын
Just ordered the leveling device to set my own sights up. This was simple and clear, providing an excellent explanation of how to go about setting up sights. Thanks and best wishes to you and your family. Have a joyful Christmas.
@byronm7234
8 ай бұрын
Thanks for this great video. Nice and simple!
@jimr7154
8 ай бұрын
Thanks for the info Levi Always appreciated
@bennyfisher4415
8 ай бұрын
Thanks Levi. Very informative.
@jwild5360
8 ай бұрын
2 axis should not even be there. It should always be machined to match the first axis. Shocked that UV was the first company to actually see that and get rid of 2nd axis. HHA having a 2nd axis adjustment and no first axis is insane. Love their sight hate that 1 aspect.
@dirtjunkie2749
8 ай бұрын
Do you prefer to level the 1st axis off of the riser vs leveling it off of the string?
@zachcromer4097
8 ай бұрын
Wondering the same. Seen most people level off the string
@jwild5360
8 ай бұрын
He did it off the riser obviously he wouldn’t come show you a method he doesn’t use. The string can and will always vary. Adding a touch of cam lean to the bow or removing some would change the strings level.
@zachcromer4097
8 ай бұрын
@@jwild5360 I agree with you! I’ve been very torn as a bow technician on whether to level people’s sights from the riser or from the string. I’ve heard many pros say to level off the string because that is the last place the arrow leaves the bow from.
@jwild5360
8 ай бұрын
@@zachcromer4097 yes I can see both sides I think riser is going to be the most consistent method long term. It’s the only thing not changing over time
@dirtjunkie2749
8 ай бұрын
@jwild5360 Obviously, hamskea's instructions for their sight level says( For best results, all sight adjustments should be referenced from the string). Also clearly states to level 1st axis to the string... Obviously, Levi trust hamskea or he wouldn't be using their tool right?
@jordancler931
8 ай бұрын
Levi you do not want to go off that level for your 3rd axis, you need to use your vertical threaded pin on a plumb line or Lazer. Bro if you need a serious Tech, come see me in Central IL at Midgard Pro Shop brother. I know you know your stuff, but I can show you how to get that 3rd axis PERFECT with lasers man. Come see me in Gilman IL
@connor_bohnts
8 ай бұрын
how many tournaments have you won?
@douglasvaughn9530
8 ай бұрын
You can't set 3rd axis with a laser or a level. You have to shoot it in or at least set it at full draw in your hand. The bow will torque at full draw from grip pressure and from the pressure on the cables in the cable guide. Levi knows what he's doing. Sounds like you don't.🤦♂️
@michaelhoffman1360
8 ай бұрын
The entire idea of shooting in the third axis is because it has to be done at full draw due to riser flex. Yes, you can do it with the hamskea tool or lasers at full draw with a plumb bob. Just line up the tool or sight pins to the straight line while aiming at steep up and down angles. But, as Levi mentions, the best way is to shoot in the third axis. All those other methods can get you very close, but there is no substitute for shooting it in.
@tannerharris1483
8 ай бұрын
This is absolutely hilarious 🤣 thanks I needed this🤣 “serious tech” 😂😂😂😂😂
Пікірлер: 20