I love collecting figures like this too as long as they're durable. Spending hard money on expensive figures that break a LOT isn't worth it so much for me. For example, the Daft Punk SH Figuarts line. Delicate as all hell! I have BOTH of them and my Guy Manuel figure broke at the arm. My Tomas Bangalter one is still fine, but I need to treat it VERY carefully to ensure that it doesn't break. I also got a Bootleg MP30 Ratchet figure, and some people are saying that it's better and more durable than the original, and as far as I can tell, it's PERFECT! It was an entire THIRD of the price, and it's still holding strong! Bootleg figures can be weird sometimes, but other times they can be great and really worth it.
@coolmuzt
2 жыл бұрын
I bought a Carnage clone and it came with a ton of red joints for the hands, so I'm probably going to pick this guy up too.
@titothealmighty3746
2 жыл бұрын
where did u buy it
@coolmuzt
2 жыл бұрын
@@titothealmighty3746 Aliexpress
@titothealmighty3746
2 жыл бұрын
@@coolmuzt Oh nice, I bought a venom from aliexpress but half of the body snapped so i had to use gorrila glue now I can only move the arms and legs :/
@noix-n6n
7 ай бұрын
If you want the clones to last longer, put them in warm water and then you can put the hands and eyes easily (I know it video is 6years ago but if you didnt know about this then this might be a game changer)
@cerethpainting6606
2 жыл бұрын
I love these bootleg figures. I use them for custom work. Great video. Subbed
@somekidnamedqai
4 жыл бұрын
It’s pretty good for a bootleg
@QuestionableAsian1
3 жыл бұрын
So I bought one for 15$ and mine broke into pieces straight out of the box.
@micoeoft08
2 жыл бұрын
the figure is pretty cool ,and your cat is cute!!
@oliverestrada7141
2 жыл бұрын
My favorite cameo is not stan lee anymore. It's d'star cat
@regulargodzilladudeyoutube785
2 жыл бұрын
where can i buy the real one?
@MaxwellNick
6 ай бұрын
I bought for over rm 149 and it two same right fist and two left feet 😠
@debbygriffie-bd6pv
2 ай бұрын
What the cat doin
@agentreptard
2 жыл бұрын
Getting 2 next month
@imeldavasquez83
Жыл бұрын
You got lucky that’s the real one it would say Deadpool if it was a bootleg
@polos7591
3 жыл бұрын
Nice vid man, i was wondering where I could buy the joints at?
@Arsstudio600karveldc
2 ай бұрын
Do you still have him just curious
@luqmanmajeed79
3 жыл бұрын
how am i gonna buy it because im in malaisia
@o2817
2 жыл бұрын
Dstar01 I have a question. I bought this yamaguchi Spider-Man figure for 40$ however I’m not sure if it’s a fake.
@frostbeyblade8333
2 жыл бұрын
just got mine it has some clicking joints but its bootleg its hard to replace the hands tips pls
@ThatFnafGuy-qj8ml
5 ай бұрын
It aint a bootleg if it has clicking joints
@Rodrigo-mexican
6 ай бұрын
Where did u buy it
@DylWal-nc3mu
Жыл бұрын
my amizing yamaguci is not as good
@Riky366135
4 жыл бұрын
Is that Erin Yeager the real deal or a copy? 👀
@dstar01
4 жыл бұрын
Real deal. Don't have him anymore sadly
@Riky366135
4 жыл бұрын
@@dstar01 That's too bad.
@theguy3851
3 жыл бұрын
I hope your cat isn't a bootleg ("._.)
@jstvrbtzzq2864
2 жыл бұрын
For 20 bucks? Just buy a marvel legends figure
@user-no7zf3qz7d
9 ай бұрын
Ñ
@scottdickson6299
4 жыл бұрын
Bootleg figures are bull ####!😡😡😡🤬🤬🤬🤬
@demgutts
7 жыл бұрын
I was afraid his head would've been out of proportion but he looks good
@bricynbryanmadarang5063
5 жыл бұрын
I'm tempted to buy it coz i found one for about 10 dollars 😅
@fasterthanyou1481
4 жыл бұрын
Bricyn Bryan Madarang i got one for $9 but its was $17 shipped and done but i got it and the right arm snapped off immediately out of the box but ig i was being kinda rough on accident but i got it in a pose i bought this figure soley for and just super glued it in place it now stands well i just had to sacrifice that one arm articulation
@bricynbryanmadarang5063
4 жыл бұрын
Ouch well I'm still planning to buy it but I hadn't find one that's decent
@phrog.4809
2 жыл бұрын
@@bricynbryanmadarang5063 I just got one for $12.30 after shipping and taxes
@manikgupta1025
6 жыл бұрын
Sad to hear you don't get much out of these videos. I have subscribed your channel.Hope this helps
@khokhareazam4147
5 жыл бұрын
Are you indian
@xgonzo7462
4 жыл бұрын
@@khokhareazam4147 da fuq?
@khokhareazam4147
4 жыл бұрын
Xander LG bra you wanna fight
@xgonzo7462
4 жыл бұрын
@@khokhareazam4147 alright! Let's boxers!
@khokhareazam4147
4 жыл бұрын
Yeah let’s ready guns
@diaamahmoud7
7 жыл бұрын
great job, it helps alot to keep guys who are outta budget informed about those bootlegs quality if its worth it or not. I would suggest u put bootleg in video name so it appears when someone is searching for it (y)
@Magikknight76
7 жыл бұрын
Great video brother!!! I have the official Revoltech Spider Man and love him. Mine comes with a clip that goes around the body and there's a magnet on the other side so you can have him crawling up or down a wall. I didn't see that with yours. I totally get needing to save money as my ASS is broke lol but with a few exceptions I try to buy the official product. Reasons being the real company don't see a dime from the bootleg sales. This means they make less money and therefore have to raise the price of their next release to make up the difference. Its kinda like they are compeating with their own product. Also most times bootleg quality is really bad. But the biggest reason I try to avoid bootlegs is the child and or slave labor used to work in the factory to produce the boot legs. Now this is not true of every case but it happens more than youd dare to believe. Primarily this comes out of China were criminal organizations use drugged up, dirt poor people or kids to work in the shitty factory and make the bootlegs. Now this happens more with designer clothes and sneakers but toys are also a huge market and poor underprivileged people and children are being exploited. Now please don't think I'm soap boxing as I myself will purchase certain bootlegs. Its just there is a lot more. going on behind the scenes than us saving some money by buying an inferior product. The one thing I will buy is certain PAK figures because paying $600 and up sometimes for a discontinued figure is way out of my budget and I can get one with loose joints for $30. Anyway good topic for discussion and keep up the great work brother...
@user-ir1xo9jp8w
5 жыл бұрын
Found this guy for 15$ and I'm very, very, tempted.
@trustobey1016
5 жыл бұрын
I recently got one and on the box it says Narvel.
@georgebusybee1497
5 жыл бұрын
Oh man😂😂😂...that's a keeper
@2067792332977602
7 жыл бұрын
Love your cat!
@user-ir1xo9jp8w
6 жыл бұрын
Which one would be less risky? Getting this bootleg revoltech? Or the Homecoming figuarts bootlegs? I feel like doing some sort of black spiderman repaint but I don't fork over 50-60$ to repaint an authentic one.
@demgutts
7 жыл бұрын
Thank you for the vid, got 1 on the way and I was wondering how he was. I'm in the same boat as you as far as collecting hence my reason for buying bootlegs considering the fact that I wouldn't have brought it even if It was in my budget. I also brought a bag of joints and deadpool after I saw your deadpool review, hopefully they are actual revoltech with clicks and not more fake joints. I'll come back and comment if they are
@kyuquwu
5 жыл бұрын
How is it?
@mysterx2207
5 жыл бұрын
Please unbox the revoltech spiderman 3 figure
@thejohncrew9012
7 жыл бұрын
Mines shoulder broke the day after I got him. There weren't any extras..... also the joints were supposed to ratchet...
@bat8858
7 жыл бұрын
I feel ya on the budget my friend the two figures in want more is that revoltech wolverine and pak wolverine
@SpideyStudios22
6 жыл бұрын
This spider-man 2 figure you love I have it in super good condition my KZitem avatar shows him…
@xgonzo7462
4 жыл бұрын
No it doesn't
@thezombiemachinist01
5 жыл бұрын
After watching this video I had to order one. I just got mine from AliExpress today. Not sure what I was expecting. I am not super impressed but not feeling burned either. $20!! 🤪 Now onto Carnage & Spider Gwen.
@skorpio1015
5 жыл бұрын
Your was is like “pls make a review about me”
@tacobellalugosi2527
7 жыл бұрын
nice vid man !!! so they have a spider gwen one now , and shes not bad . the neck is abit loose but that floor care stuff is awesome and shes not loose .
@tinlunlau1
7 жыл бұрын
I need to pick up a bootleg revoltech dead pool to replace that hearty eye I lost.
@JuancitoCardonaa
5 жыл бұрын
When you realize you have the fake one
@chimichangaproductionsextr4714
7 жыл бұрын
can you get fake venom
@chimichangaproductionsextr4714
7 жыл бұрын
dstar01 .thank you for replying
@devonisback9826
7 жыл бұрын
btw when u unboxed the figure was there plastic wrapping on some of the joints on the figure.
@devonisback9826
7 жыл бұрын
dstar01 ok thanks man
@noahandrew1854
7 жыл бұрын
Great review! Sadly, my figure came with the hand pegs broken inside of the figure
@noahandrew1854
7 жыл бұрын
How could I repair it?
@noahandrew1854
7 жыл бұрын
Could a marvel legends Spider-Man hands work?
@magnumbadguy9354
7 жыл бұрын
I got that same mikasa clone and I feel your pain. I thought it was real and was so distraught but I later learned it was fake the price should've been a dead giveaway . Like you I never got another bootleg but I'm seriously considering getting this one.
@ArachnidYouth
5 жыл бұрын
Im actually thinking of getting this figure. The sh figurarts Spiderman was a wreck but I kept the weblines for my marvel legends Miles Morales. So now thanks to your video I DEFINITELY will be picking this figure up!
@ferenosanimations6010
4 жыл бұрын
I actually have a tip for loose joints dont you just hate it if your ball joint becomes two peaces but not broken just two parts then put a tiny peace of paper to make it more tight it always works and I have a question whats the ingredient for that chemical I cant just buy some cause Im just a kid and I cant just ask my mom to buy me some we would have to go to a far mall to get some
@bcgilbert5
7 жыл бұрын
Bro that's my favorite spider man the Spider-Man 2 I love that guy it's my favorite
@komplecks888
7 жыл бұрын
The spiderman 2 figure is my favorite to!
@unorthdoxcleric6953
5 жыл бұрын
I would love to know more about the Figure Bootlegging industry. Where do they get the moulds from, how do they decide which figures to bootleg, where are they made who makes them and who finances this stuff?
@frostbeyblade8333
2 жыл бұрын
But its probably from china got mine from china
@ArachnidYouth
5 жыл бұрын
Update: I got the figure and my expectations were actually exceeded! They actually used a few revoltech joints for the torso and the shoulders. as far as the paint it looks very faded and i dont thing it dried all the way, resulting in the red parts looking very dingy. plus the web effect parts for the thwipping hands dont plug in bc the hole is too small
@dedlex
2 жыл бұрын
You can use a pen or pencil to and use it to make a larger hole
@mouthy4729
5 жыл бұрын
All The Spidey Clones I Can Find Are $19.87
@inklink6270
5 жыл бұрын
Well, I'm considering buying this bootleg because: 1) The original retail version is way above what I can pay, considering that I live in a country which everything is way more expensive than I would like to; 2) The drawbacks are not enough to discourage me, considering reason number 1; 3) I would just really love to have a decent spider-man figure, since I love the caracter and would love taking pictures with him in custom poses. Some advice? I'm considering buying one but I'm not really sure anyways. Should I buy it, considering the three reasons?
@inklink6270
5 жыл бұрын
@@dstar01 Alright, thanks man! i kept repeating "considering" lol
@jedposadas3651
6 жыл бұрын
Can anyone tell me how to tell the difference between the fake and the real one by just looking at the box? Thanks
@jedposadas3651
6 жыл бұрын
Thank you
@jedposadas3651
6 жыл бұрын
dstar01 What is a distributor stick?
@GuyOnSaturn
6 жыл бұрын
I only clicked on this because of the aot figure in thumb nail
@cristoffis
5 жыл бұрын
Nice! I know what's fake and real now if the painnaps is dark it's fake if it's brith color it's real
@tony00500montana
7 жыл бұрын
does the magnetic clip holds up well? like can it carry the weight of marvel legends figures?
@TheLegendCG
6 жыл бұрын
I think it can cause hes about the size of a marvel legends figure
@abuanimates1174
6 жыл бұрын
yo the hand joints on mine are turning white
@jajsuertemaestro3050
5 жыл бұрын
Hello! how can I do to realize that is bootleg before buying it
@fire3008
5 жыл бұрын
The price, the actual figure is arond $60 too $80 but bootlegs are around $10 too $30
@jacobchanza5484
7 жыл бұрын
So which part of the joints would you have to sand down?
@hunterstrike6087
5 жыл бұрын
So cute cat
@jenniferbanton2979
5 жыл бұрын
I know right
@graceagou8778
4 жыл бұрын
The bootlegs are good for kids because if they are not bootlegs kids can break it easily.the bootlegs are does like toys but not made for toys
@bandotzzZ
6 жыл бұрын
Thanks for the video, now we can see what bootleg lookslike, i just backorder the legit one, hope i don't get scammed :P. just wondering, do you support bootleg figure?.
@jeffj5963
4 жыл бұрын
Please tell me where you got this figure
@oliversapnu7585
5 жыл бұрын
can you do mafex flash bootleg
@ianlouiseviray7976
6 жыл бұрын
does it have extra joints
@yogurt3560
6 жыл бұрын
IT just made by china i mean they have alot tvingas some Times' they just breaks
@openfacehairjenggoy3847
6 жыл бұрын
Do revoltech cap america bootleg
@succerrr5555
5 жыл бұрын
Can you tell me how to fix those joints separated BTW: in our place we don't have that pledge think. Any recomendation fixing lose joints ?
@alvarogarcia4735
5 жыл бұрын
Super Glue can be used and u can look up how to do it but its a bit risky.
@succerrr5555
5 жыл бұрын
@@alvarogarcia4735 ok thnks alot
@captainjd6256
6 жыл бұрын
Nice
@demgutts
7 жыл бұрын
I might bite the bullet for wolverine, he looks too wicked and I know the bootleg is going to have horrible claws
@demgutts
7 жыл бұрын
just got Spiderman with 2 left fist other than that he's good
@demgutts
7 жыл бұрын
got deadpool as well, all of the eyes were painted as regular eyes. so instead of having big eyes they are painted as little slits. good thing i customize figures and i have paint on hand
@pramitgupta1372
6 жыл бұрын
Malnourished spidey
@gunner8883
7 жыл бұрын
Love Da cat
@inklink6270
5 жыл бұрын
*there's a cat*
@ianemmanuelviray4102
6 жыл бұрын
Are there any extra joints included
@frostbeyblade8333
2 жыл бұрын
No
@gizmodeus
7 жыл бұрын
CAT!
@imbatman3696
7 жыл бұрын
Could you please give me a link to the auction which you bought Spidey from? I see that this bootleg is actually pretty decent
@imbatman3696
7 жыл бұрын
I know, but there can be very lose ones while yours is almost like an original figure
@imbatman3696
7 жыл бұрын
dstar01 they aren't always the same, trust me, but I'll try to find good one
@MoazIkhlas
5 жыл бұрын
Your kitten is soooo adory😻😻
@une6two943
7 жыл бұрын
poor mikasa :_ ;
@erikaa7671
7 жыл бұрын
figma does suck solid snake I got for 11,,thousands so it wasn't a bad price,,,,but figure sucks
Пікірлер: 128