Might be a good engine/gearbox to put in one of your other cars at a later date, wreckers will have them.
@maestrovso
3 жыл бұрын
2:54 What looks to me like hairline cracks between the exhaust valve seats and the spark plug ports. Two on the middle cylinder and one on the right hand side cylinder. I have seen cracks like this before on different engine and it is consistent with it consuming a lot of coolant. With not being able to inspect it first hand I can be wrong. The smaller hose plugged with a ball bearing appear a defeated PCV ventilation - consistent with PO's handy job of messing with the vacuum lines. This car has been badly molested by the PO.
@will3346
5 жыл бұрын
Two AZ-1 videos in a day! Toms turbo just did a video on the AZ as well
@TheGreenNewSteal2025
5 жыл бұрын
Such a cool little racer.
@山田英二-o4n
5 жыл бұрын
日本でも貴重な旧型車を何台も持っていて凄いですね!!
@Chuck59ish
5 жыл бұрын
The small cars always take the most work to fix anything.
@lovund86
5 жыл бұрын
Is it just me, or is there cracks from most of the exhaust valve seats to the spark plug holes at 2:42 .
@ericmarkovic4984
5 жыл бұрын
i see that too.
@biglovesam
3 жыл бұрын
thats what i noticed
@TomsTurboGarage
5 жыл бұрын
Love this! Thank you for the video and for sharing this!
@douro20
4 жыл бұрын
Yep, that's a tiny turbocharger. It's an IHI RHB31. It's still in production and remains the smallest turbo ever to be put into regular production. I wonder if an HR10DDT would fit in there with some work. It's a turbocharged 1000cc engine with direct injection which makes 118hp and 148 ft-lb. torque.
@kimkiriniki9433
5 жыл бұрын
Mmm, you have been very thorough but that engine just doesn't sound happy to me. Oh, really like the white Mazda 323 sedan parked alongside.
@vector6977
5 жыл бұрын
Looks like a motorcycle engine.
@Mr00934
4 жыл бұрын
very cool. pls email it to me. i want one
@joshonthetube
5 жыл бұрын
Isn't a blocked off blowoff valve kind of a bad thing?
@2stroketurbo
5 жыл бұрын
Yes sir. It's very hard on the turbo. Trying to find a replacement
@joshonthetube
5 жыл бұрын
@@2stroketurbo Did it contribute to the head gasket failure, you think, or does it only affect the turbo? (i'm not that familiar with how these things work, other than it has something to do with releasing pressure)
@robbymidgett3797
5 жыл бұрын
joshonthetube There is definitely a possibility. With the blow off valve blocked off, the pressure the turbo is producing (even at idle) with start to compress in the turbo piping. With the pressure building, the air will either break its way through the piping, force its way back through the turbocharger (creating what’s called “compressor surge”), or wait for you to crack the throttle where it will force more psi through the motor then the motor is intended to handle. I’m actually quite surprised that it’s held together this long under such conditions.
@richardhuckaby4728
5 жыл бұрын
how did you move the car after pulling the drivetrain/cradle?
@nunyabusiness896
Жыл бұрын
I know! I wanna know too!
@pjneslo8979
5 жыл бұрын
Another great video from the Auto Magician... Please follow this video up once you have completed this project.I know you probably will but I know this car will be purring like a kitten once you get all the kinks out... Great job!
@philipcooper8297
5 жыл бұрын
Did you replace the clutch while you were in there? Checking the main crankshaft seal would be also advisable since the engine was out.
@randyc8171
5 жыл бұрын
I am sure the DKW owners love their cars much more after looking at that complicated car.
@PistonAvatarGuy
5 жыл бұрын
Ahhhh!! Don't rev an engine until it has warmed up for a couple of minutes!
@captainknuckles6421
5 жыл бұрын
Who would be crazy enough in the world too throw in a Hellcat engine in one of these
@1961kickboxer
5 жыл бұрын
That's a beauty engine and micro car.
@oscarzt1652
5 жыл бұрын
sounds like it only fired up on 1 cylinder
@liamturner6424
5 жыл бұрын
It kinda sounds like a rotary
@mikek5633
5 жыл бұрын
Excellent work, so far. How many hours, do you figure, you have into this job?
@2stroketurbo
5 жыл бұрын
A lot. 4 days solid still not finished
@VanWinger
5 жыл бұрын
On startup at idle I almost could hear a little 'Das Kleine Wunder' in the exhaust note.
@2stroketurbo
5 жыл бұрын
Yes. The 3 cyl. idle lopes a bite . I'm beginning to wonder if this car has aftermarket camshafts
@fuzzwack1
5 жыл бұрын
If coolent got into the cylinder,how do you know that it didnt try to hydrolock,..bend the con rod abuse the main bearings,,in that cylinder..just saying..?
@lustfulvengance
5 жыл бұрын
Agreed and with the way it was running it sounded like it was only running on 2 cylinders.........
@Owiko7
5 жыл бұрын
@@lustfulvengance It probably just needs new plugs to get all three cylinders in order. I have had a blown head gasket foul up and even kill sparkplugs in my van before.
@biglovesam
3 жыл бұрын
what about all those cracks from the valves to the spark plug hole?
Пікірлер: 38