Really cool to see a KZitemr building things the proper way! I have a feeling your channel is going to grow immensely.
@FortressFineWoodworks
Жыл бұрын
Thank you kindly! If this channel grows immensely, it will be in the hands and help of viewers like you. Thanks for watching!
@joeyr4869
Жыл бұрын
It’s crazy you were able to do this type of work out of a tiny garage before this. The new shop must be a dream!
@FortressFineWoodworks
Жыл бұрын
Yeah! Well my stack of plywood was leaning against my living room wall, cabinets would be stored anywhere they could fit in the house or back porch, and when I used to spray solvents, my house would stink for days while everything cured.
@Diana-vp3zr
2 ай бұрын
That plywood storage 😍
@FortressFineWoodworks
2 ай бұрын
It's pretty nice! Thanks so much!
@Benmeglei1
Жыл бұрын
Just picked up the Milwaukee cordless pin nailer. It’s about half the size of the Dewalt and so far I must say I’m impressed.
@FortressFineWoodworks
Жыл бұрын
I considered that one for sure! It looks like the best bet if someone wants to get into the Milwaukee ecosystem. Thanks for watching!
@bridgetdvorak463
Жыл бұрын
Wow! There are so many pieces that go into one project! You also had a pretty cute pup assistant this time 😊
@FortressFineWoodworks
Жыл бұрын
Thank you! He should be paid
@docdoctme
5 ай бұрын
New subbie- your work is phenomenal! Thanks for sharing your talent.
@FortressFineWoodworks
4 ай бұрын
Thanks for the sub! I hope to see you around in the comments section!
@oltedders
12 күн бұрын
Heavy duty. Massive weight also...obviously. what a nice thing this is. Who wouldn't want to show this off in their interior.
@FortressFineWoodworks
12 күн бұрын
Thank you! I'm glad you like it!
@gabet3754
2 ай бұрын
Beautiful job. Wow
@FortressFineWoodworks
2 ай бұрын
Thanks so much!
@bobrobinson4557
8 ай бұрын
Very nice. Thanks for pointing out the inadequacies of hard wax oil. I learned it the hard way. Looks great but… Nice to see the science behind your processes.
@FortressFineWoodworks
8 ай бұрын
Glad it was helpful! Thanks for taking the time to watch!
@AVSMedical1
9 ай бұрын
Amazing work, really beautiful. I’ve never used one, but the Lamello Zeta seems like it would’ve worked well instead of the pocket holes on 12’ headers.
@FortressFineWoodworks
9 ай бұрын
Thank you! Yes I agree about the lamello. I will need to invest in one of those soon
@mattelias721
Жыл бұрын
Having your new (I'm not jealous btw) shop allows you to seriously show your skill, man. That looked amazing and intimidating. I'm doing some very (very!) basic built in shelves, and you provided so many great tips. Since you asked, I'm a fan of the Makita ecosystem. The only things of theirs that have failed me are orbital sanders, and I've repaired the worn out parts myself, so now I have three of them. That said, I own a Porter Cable pin nailer and a PC brad nailer. Both are air-fired, and I've forgotten how difficult life was before. DeWalt, in my opinion, is creeping slowly toward Harbor Freight-hood. Pro tip: a brad nail in a finger bone or better - under your fingernail - is inevitable, so just carefully yank it out with pliers... turpentine helps stop the bleeding.
@FortressFineWoodworks
Жыл бұрын
Thank you. I'm glad you get some good info from my videos. I agree, dewalt is slowly taking a nose dive. And OUCH. Turpentine on a Brad nail hole under the fingernail? Might as well light a match and get it over with! (Just kidding)
@yasarmevlutoglu776
Жыл бұрын
Всё на высшем уровне 👍👍👍🇹🇷🙏
@FortressFineWoodworks
Жыл бұрын
Thank you for watching! 🙏
@CorbinMusso88
Жыл бұрын
I wish I had friends to share these videos with. 😅
@FortressFineWoodworks
Жыл бұрын
Spam your enemies with them instead!
@yanetmartin8661
Жыл бұрын
Una maravilla , exelente trabajo .
@FortressFineWoodworks
Жыл бұрын
Gracias por ver!
@DimitarStoyanov-n6q
8 ай бұрын
Great job, If I may ask what type of paint are you using for this project?
@FortressFineWoodworks
8 ай бұрын
Thank you. Envirothane 170 primer and envirothane 200 topcoat in 20 sheen. You have to get it from industrial paint supply shops
@ВалерийИванов-с1ж
8 ай бұрын
Классная работа😊! Какую краску использовали для покраски?
@FortressFineWoodworks
8 ай бұрын
Thank you. I used envirothane 170 primer and envirothane 200 white topcoat
@allenriff9242
Ай бұрын
Dewalt air nailers will shoot 2" pin nails.
@FortressFineWoodworks
Ай бұрын
Only the air powered ones. I don't think the battery powered one can fit the 2 inch pin nails. 23 guage
@infinityvideoprod
3 ай бұрын
@2:53 you DID NOT just try to clear that waste piece with your fingers, DID YOU? WTF were you thinking? Otherwise, beautiful project!
@FortressFineWoodworks
3 ай бұрын
Yeah I did. With the blade guard there, it seemed safe enough! Thanks!
@infinityvideoprod
3 ай бұрын
@@FortressFineWoodworksunfortunately when you promote yourself and your channel to be the "teacher" of woodworking techniques, chief among them should be best safety practices. You set the example others will follow, good or bad. Hey, we've all done it, just remember to edit those parts out! 😊
@haydenclarke8129
8 ай бұрын
What model graco airless do you use?
@FortressFineWoodworks
8 ай бұрын
Graco x7 Just a contractor model, but I use a 308 fflp tip which produces the fine finish
@ДартВейдер-з4э
9 ай бұрын
💥💥💥👌👍😎
@FortressFineWoodworks
9 ай бұрын
Thanks so much!
@TheTexasWayne
8 ай бұрын
You need to get yourself a lipping planer.
@FortressFineWoodworks
8 ай бұрын
I have never heard of that
@mateuszukasiak7675
7 ай бұрын
I would price this at 15k usd
@FortressFineWoodworks
7 ай бұрын
Then the customer got a good deal! Thanks!
@mateuszukasiak7675
6 ай бұрын
Was I far off?@@FortressFineWoodworks
@ВалерийИванов-с1ж
8 ай бұрын
Я бы рекомендовал не делать острые углы на плинтусах пола. Это может быть травматично,когда случайно ударишься ногой.
@FortressFineWoodworks
8 ай бұрын
Thanks for the advice!
@marvincabinta1420
Жыл бұрын
too mmuch talking
@FortressFineWoodworks
Жыл бұрын
Ill take that into consideration for my next videos! Thanks for watching.
@s70cas7ic0
Жыл бұрын
If I may ask a stupid question, what king of router motor can run those router bits that you used for the raised panel and rails and styles?
@FortressFineWoodworks
Жыл бұрын
This router that I have in the description. Bosch Router (for router table) - amzn.to/3VDxROU
Пікірлер: 53