Of course he does, Dimitri always has shit takes in his case reviews, I don't tend to watch them for that very reason 🤷♂️
@boo3427
Жыл бұрын
It you have a high end brand it doesn't hurt to have a minimal stamp logo to show genuinity somewhere it won't usually be seen like the rear. Imo dmitri has always been the top creator for case reviews. Always well balanced and so much experience with other cases. Plus sexy b-roll
@tokyoclippedyou
Жыл бұрын
@@boo3427 not everything needs to be branded
@nopenope7088
Жыл бұрын
I couldn't disagree with you more about the logo critique. I DON'T WANT any logos on my case.
@HardwareCanucks
Жыл бұрын
Haha, i dont mean doing something outrages, but a logo at the back (like they've done with previous cases) would be appropriate branding. -D.
@MaheerKibria
Жыл бұрын
@@HardwareCanucks I appreaciate that they are confident enough in their design that they don't feel like they need a brand logo. Though a sticker in the box for people that need/want that might not have been a bad idea
@GENKI_INU
Жыл бұрын
I think when you're paying THIS much for a case, the primary audience for this wants something that looks "custom" or "professional IT" with no logo. This manufacturer knows their market.
@chairs-dimension
Жыл бұрын
@@HardwareCanucks Funnily enough, Dan asked for feedback specifically about the logo, which used to be on the front of the case - it was removed after people said they wanted a clean look
@CR0SSJ
Жыл бұрын
User name checks out XD
@MichaelBertolino
Жыл бұрын
Lian-Li x Dan Case A3 is going to be where it's at. Worth waiting for over this solely because of the 360mm radiator support
@HardwareCanucks
Жыл бұрын
Excited for that one too! -D.
@matthewrezuke8130
Жыл бұрын
At added side.. kinda defeats small form factor. This case can run it all at great temps.
@rinkumultani6515
Жыл бұрын
@@HardwareCanucks i would love to have small form factors with dual 240 rad configuration case for my next build
@MichaelBertolino
Жыл бұрын
@@HardwareCanucks Damn shame it got delayed; was supposed to come out in March, but fingers crossed for a soon release date 🤞
@TBarSystems
Жыл бұрын
360 aio support in ITX is kind of redundant when you consider the options currently on the market that can already support a 280. plus its not all about raw radiator density but rather a clean and efficient airflow path, which is why this C4 in air cooled configuration works so damn well.
@bryanAsousa
5 ай бұрын
Cant wait for the v2 to come out.
@KevGoesRiding
Жыл бұрын
This is a proper case review. Loved the little insights!
@Idtelos
Жыл бұрын
Been waiting for this case for a few months now. 2 days till general release and I will definitely be getting it and pairing it with my 4090 fe as my new htpc.
@No1zy
Жыл бұрын
Such a good in depth review. I always admire the scripts of this channel’s product reviews
@MultiSciGeek
Жыл бұрын
I cannot believe this even fits an AIO. Damn. Simple case, but well designed!
@HardwareCanucks
Жыл бұрын
Yeah it's an awesome case. Surprised it fits large CPU heatsinks. -D.
@terrencepowersofficial
Жыл бұрын
One thing i wish the case allowed users to do is to flip the orientation back to a normal setup. This is basiclly an NCase M1 but better imo.
@Augusto9588
Жыл бұрын
NR200 = 18L / $99 C4-SFX = 15L / $229 More than double the price for a mere 3L reduction in volume? These ITX case manufacturers are out of their minds with those prices.
@pkpnyt4711
Жыл бұрын
You've obviously never seen how big the difference is in quality when it comes to the materials for these cases have. I have the SSUPD meshlicious and that destroys the NR200 in terms of quality. The panels, fit and finish, and materials are way ahead of the cheap constructing of the nr200. That's where the price goes.
@Anti3D-0
Жыл бұрын
Law of diminishing returns. Ncase M1 is 13L and was $200+ as well With that said, the H20 is is 11L for $170
@KollywoodReview
Жыл бұрын
@@pkpnyt4711 Cheap constructing of nr200p ? lol!.. Your are talking about 2020 Case of the year . C4-sfx has great materials fine.. that doesn't mean nr200 has cheap build quality. I have nr200p white and it looks great , performs great , great price .. supports matx , atx psu.. 17 litres .. 80$
@SomeDude0881
Жыл бұрын
Imagine not buying the Thermaltake Tower 100. $100, Full ATx psu support. Full height cooler support. 335mm GPU support. And thermaltake quality. SMDH
@pkpnyt4711
Жыл бұрын
@Mr.X I've had the nr200 and it's cheaply made. It's a pretty good case, but you've never had any of the sfx cases here to compare the material quality, nor the fit and finish. The nr200 has a plastic top and the mesroom nor the one mentioned in the OP are all higher quality than that. It also became case of the year because a lot of people bought it for it's price to performance. It doesn't mean it'll perform better or look nicer than the two cases I mentioned.
@RN-zb7li
Жыл бұрын
Hey Dimitri, on your comment about the D15, if you look closely on the render you can see that it's actually the D12L (look at the tower width and the jagged edge pattern). So it's really not their fault, they showed what will work and it worked perfectly, people just need to look closer sometimes.
@HardwareCanucks
Жыл бұрын
Yup 😂 at a glance I got confused. But ofc knowing there are other dual towers from Noctua will remove the confusion. -D.
@Mutinyofthemind
Жыл бұрын
The cutout for the PCI-E card lock is nice! Granted, I'm a heathen and just remove them from any ITX board anyways since I'm not interested in stabbing my mobo with a screwdriver to remove the GPU.
@VerdonTrigance
Жыл бұрын
yeap, this is very convinient case format for those who has limited space or travels a lot. It can handle middle to high end hardware and has good air flow. But price is definetely can be lower.
@megadeth8592
Жыл бұрын
great for dust lovers
@professorh8398
Жыл бұрын
I. Can't. Stand... SLI riser cables. Great video 👍
@sleepagedog4242
Жыл бұрын
I love my ncase m1. Best itx case i bought. No plans of changing it.
@Redman147
Жыл бұрын
Honestly if I can fit it in a bag then it's SFF enough for me. SFF for me is when I moved from CT to TX in 2020, right when the rona happened, and my carry-on was 3 bags. This is what was in there if I can remember completely. xD Tech Backback PC; Fractal Node 202 Corsair SFX 750 Ryzen 5 2600 Asus B450I Corsair LPX 3200MHZ 2x8GB Noctua L9a with Silent Wings 3 120mm PWM AMD 5700XT Crucial P1 NVME 1 TB Samsung 860 EVO 1 TB Accessories; Razer keyboard (It's really old and I forgot the model) Logitech G502 Proteus Spectrum Corsair Void Pro headset Logitech C920 Tools for my PC Monitor stands for the 2x22in Viotek GFV22CB Cables for everything 2nd carry-on bag; 2x22in Viotek GFV22CB wrapped in LOTS of bubble wrap 3rd carry-on bag; Rode Podmic Rode PSA-1 Arm Focusrite Scarlett Solo 2nd Gen Backup Roccat Kone Pure Military Edition mouse Audio-Technica ATH-M20X Extra PSU cables Mobo accessories in a small shock proof container Snackbars You should've seen TSA when they sent my bags through the X-Ray machine, and they couldn't figure out what on earth they were looking at. They asked me to open my bags. I thought everyone behind me was gonna get pissed cause it's 3 big carry-on bags and the line was long. Everyone seemed genuinely interested when they saw I literally packed everything needed to set up shop and game into 3 bags. Only things missing was a desk and a chair. That's when I found out about pre-check xD It was a fun time hauling that stuff around and even the airport PD wanted to take a look because they'd never seen someone carry-on tech like this. Someone even suggested I was a government analyst. Part of me wanted to be like "Yup just going on a short assignment", but then I was like nahhhh I don't wanna be a prison bitch.
@nexorabolis
Жыл бұрын
Woo hoo! Was waiting for your review
@RitchieLinao
Жыл бұрын
Noctua C14s and L12s is the best for this type of case.
@simoSLJ89
Жыл бұрын
The problem with ITX cases is that every generation components get bigger. The case might be too small for the next cooler, next gpu, next psu. I prefer a high end bigger atx case, cause I'm sure that I can keep it for 10 years without any problem (like the O11 XL).
@dvnwllms
Жыл бұрын
The "next" list is patently false. It can already accommodate a 280 rad & good coolers aren't getting bigger, they're getting smaller as evidenced by the D12-L. GPUs have gotten thicker the past gen, but it easily accommodates 3+ slot designs. Those aren't going anywhere. And psu? There are already several 1000+ watt sfx & sfx-l psus. There are reasons to go for bigger sizes, but it's none of these.
@simoSLJ89
Жыл бұрын
@@dvnwllms Future will be smaller, but at the moment, it's not still great. Failure rate of sfx psus over 850w is much higher than atx psus. If you want to stay on air, D15S or similar are still kinda big. And high end gpus, 4090, or even 3080, are monsters :D. I have a mini itx TU150 as htpc, and that's fine, but as main pc mini itx is not ideal.
@dvnwllms
Жыл бұрын
@@simoSLJ89 There are tons of people running 4090s in sub 10L cases with no problems. Haven't seen anybody who planned properly complain about a much smaller 3080 in SFF either, sounds like a skill issue to me. Citation needed on the failure rates as well. I know earlier on Corsair had problems, but they aren't the makers of the 1k+ watt models - that's Silverstone, Thermaltake, Coolermaster, & (sadly) Asus. The problems you have with your case aren't an excuse to generalize.
@simoSLJ89
Жыл бұрын
@@dvnwllms I don't have any problem with my case, that's just my take on sff builds. You have yours. Have fun.
@AnityEx
Жыл бұрын
I thought your logo was the Loss meme before realizing the initials were HC lol
@TirzaBoi
Жыл бұрын
ok, BUT can it fit matx, atx, or eatx lol
@TravisAxel
10 ай бұрын
This case would have been perfect with a handle. Where am I gonna get a small form factor case I can carry around and has 3 slots for a 6800XT?
@SoopaFlyism
Жыл бұрын
No dust filters. It will get dirty real quick. How about 3rd party filters, will they fit?
@paulmorris1834
11 ай бұрын
I don’t think logos should be a staple in design, the build quality should speak for itself.
@michaelthompson9798
Жыл бұрын
A great looking compact itx case by Dan Cases / Lian Li 🥰🤩👍💪.
@michaelmonroe5034
Жыл бұрын
Have one due here any day... still on the fence between liquid and air... interested in the air for less cables only. May just have to pull the trigger on the air components
@sar2dg
Жыл бұрын
I really like the darkFlash DLH21.
@ArdyneusTheGod
Жыл бұрын
I have the HYTE Revolt 3, which is “kinda” a vertical version of this case.
@ronin6726
Жыл бұрын
What keyboard are you using? I love the sleek black!
@HardwareCanucks
Жыл бұрын
That’s my Asus ROG Azoth 🥰 absolutely love it for my daily gaming. -D.
@itsdeonlol
Жыл бұрын
This case looks so good!!
@RPSGCC733
Жыл бұрын
Have you tested it with an actual RTX 4090 MSI gaming trio or is it just based on measurements? It says it doesn't fit in the vid but on the official website it fits. Is there a catch? There's also smaller, less popular 4090s like Colorful, Gainward, Palit that will fit in this case.
@AdrianIrwin
Жыл бұрын
Second this, I'd like to see an actual test with the hardware.
@dirk_dirk_goose
Жыл бұрын
I was actually looking for a small-ish form factor case! I am deciding between the ASUS ap201 and fractal torrent nano, but these cases seem to be starting to interest me! 🎉
@noycii
Жыл бұрын
Will you ever do a full build guide for this?
@bobwatkins1271
Жыл бұрын
Oh my. Looks like I'll be doing another build.
@rapu3011
11 ай бұрын
If only this is available.....
@helloukw
Жыл бұрын
I hate that in small form factor cases the PSU has to have an additional cable rerouted which takes a lot of space and its hard to manage by being so thick, but I get it, that's not something easy to fix.
@osobigg
Жыл бұрын
Would love to see if you could mount 3.5" hard drives in the GPU area of this case. would make a very nice SFF High storage iGPU PC. same with the Fractal Ridge
@vincentvega3093
Жыл бұрын
Jonsbo N1 if you want aluminium
@mdbdoc1
Жыл бұрын
Could you deshround the gpu? Would that work in this case?
@caffeinecreature
Жыл бұрын
Question: all promotional pictures show the NH-D12L in this case with both fans installed. Can you actually fit the second fan over the RAM without running into clearance issues?
@devisals
Жыл бұрын
Yo bro how long have you been working out for
@SolidSnake42US
Жыл бұрын
Do you think this case could tame the Aorus Master 3080? I know it SAYS it fits in, but I just tried a Sliger S620 and it was no go. If you got the GPU on hand, would you be able to see if it fits into it?
@LOVER_LINK
Жыл бұрын
would adding mesh filters heavily impact the airflow ?
@Tipstaph
Жыл бұрын
@Hardware Canucks: Is it possible to get a parts list for this build?
@michaelgabrielgarcia1004
Жыл бұрын
But...but.... I love my SAMA IM01! And its like $69 😅
@ridwananhar4418
Жыл бұрын
Will you review the Jonsbo D31?
@nielderfp
Жыл бұрын
It would be nice if it came with a PSU with appropriate short cables.
@noble64890
Жыл бұрын
Is it possible to fit in a Noctua NH-D15S in this case?
@maxd6178
Жыл бұрын
How is it to have the graphicscard on top? I've always been running fans on top as exhaust as it's prone to suck in alot of dust.
@Lynch30
Жыл бұрын
But why we should pay more for smaller case?
@fjkladsj3424
Жыл бұрын
AFAIK there are quite a few custom RTX 4000 cards that fit in there.
@Dr-Mengueche
Жыл бұрын
Is there an ITX case that can fit a red devil 7900xtx? It needs like 343mm length and at microcenter it says that is also 3.7 slots wide. I am way past my return window and even though that is for an h9 flow build, I still want to upgrade my itx build.
@danielnordstrand6443
Жыл бұрын
Going with the comments that say the case will become too big to fulfill the ITX culture... WHY ARE PEOPLE NOT PUSHING FOR GPU MANUFACTURERS TO CUT DOWN THESE RIDICULOUSLY THICK GPUs?!?!?! 🤯😫😵💫
@fukairen9601
Жыл бұрын
Can I put Ncase M1's 3.5HDD bracket on C4's AIO panel?
@ireallyreallyreallylikethisimg
Жыл бұрын
I need some cad files for a nice case like this and I'll make it myself 💀💀💀
@112Famine
Жыл бұрын
This is NOTHING BUT A CLONE of Jonsplus i100 Pro Version G case that came out about a year or more ago. But the i100 can fit dual slim 360mm rads with slim fans
@cmo8627
Жыл бұрын
Blackshark v2 Pro 2023 review when?
@HardwareCanucks
Жыл бұрын
Coming coming 👍 just want to give them a proper break in period. -D.
@n0oo7
Жыл бұрын
I got an ASRock 7900xtx looks like it might be to big a fit
@saifullahalatif
9 ай бұрын
I cannot track where you install the psu😢, this video not clear
@jumper55ful
Жыл бұрын
It looks like the PNY 4090 should fit (PNY NVIDIA GeForce RTX 4090 XLR8 Gaming Verto Epic-X RGB Triple Fan 24GB GDDR6X PCIe 4.0 Graphics Card) can anyone confirm?
@johnnyblaze1684
Жыл бұрын
amd 7900xt and xtx fit?
@Hushoo
Жыл бұрын
That USB-C only front IO is begging for a dock
@HardwareCanucks
Жыл бұрын
Yeah, true for most ITX cases today they give one USB-A and C. -D.
@monsterhoodlum
Жыл бұрын
I want to build an itx pc but thus is not available in India. Sad
@badalrana10
Жыл бұрын
4:07 can someone explain why ssds aren't recommended in itx? Thanks
@R1ckyZer0
Жыл бұрын
Just to be clear that ssd got two form, 2.5 inch ssd and m.2 ssd. He said that specifically to 2.5 inch ssd, and he never said it is not recommended. He meant that in itx cases its easier to stick to m.2 ssd because it will be installed directly on the motherboard, also without any extra cables which 2.5 inch ssd need. So if you want/need the 2.5 inch ssd, it's totally fine.
@omar13018
Жыл бұрын
Was going for this case, but I decided to try the formd t1 v2 with my 4090fe. Hopefully, I made a good choice.
@matthewrezuke8130
Жыл бұрын
I think the only downside with the t1 is the cpu cooling.
@Cooper3312000
Жыл бұрын
Push pins break off easily mine arrived with two broken out of the box.
@airixxxx
Жыл бұрын
why would you want a logo on a case?
@wheezel666
Жыл бұрын
Was about to buy the Meshroom S before this was first brought to my attention by Optimum Tech. This case looks incredible and I'm all for the lack of logos and other frills. The Only thing I dislike somewhat are the legs. Simple pegs for all four corners would've looked cleaner than this current rubber "foot".
@VelcroSnake93
Жыл бұрын
Those case feet ruin it for me, I'd have to replace them with some corner feet.
@chonkiboii
Жыл бұрын
Meshlicious still King.
@Ghettochild.2600
Жыл бұрын
Does a 4090 FE fit?
@HardwareCanucks
Жыл бұрын
Yup 👍. -D.
@kotztotz3530
Жыл бұрын
Why do these have to be so expensive when they use less material? I understand there's more R&D to make sure it fits everything, but still.
@riba2233
Жыл бұрын
They use different manufacturing methods, which are very time and labour heavy. Also they use more premium materials and finish. And they sell in lower quantities so they have to have better margins. All in all, it is actually very fairly priced.
@WayStedYou
Жыл бұрын
Sales volume r&d and manufacturing methods are more of the cost than raw materials.
@arkapadma
Жыл бұрын
ITX is sport car for rich people who want space, power, and look. mATX is family car that suit everyone. ATX is a crossroad truck that professional need for workstation.
@ronstewtsaw
Жыл бұрын
Aluminum is one reason. Steel where others use plastic is another. All that folding and punching means expensive tooling and slow production. But more than double the cost of an NR200 is a bit hard to swallow.
@nster3
Жыл бұрын
Bloop! Bloop bloop
@danielp121
Жыл бұрын
love the case, but not buying it at $229 :(
@zombl337og
Жыл бұрын
cool for an itx, but for me itx is still just way too limiting for my vision
@SimonKramer-b5e
Жыл бұрын
already sold out
@mikep9418
Жыл бұрын
I disagree with your comment about no need for 2.5" ssd's. Some itx boards only support 1 m.2 slot so the additional storage comes in very handy. I think I prefer my NZXT H1 to this case.
@womz8203
Жыл бұрын
One of the best cases that one can't buy... Such a shame that it's not available anymore after only a few months of being on sale.
@arewealone9969
8 ай бұрын
Black just in stock in Australia that is.
@miagi1337
Жыл бұрын
The paradox thing is, the bigger you make the case, the more ppl might buy it. But at some point it gets too big to fulfil the ITX idea and it becomes useless.
@ScottGrammer
Жыл бұрын
I see a bell curve somewhere in this.
@Zufield
Жыл бұрын
I mean, it's still useful; it's just no longer a mini ITX case.
@Polymath2B
Жыл бұрын
It’s just not as compelling to get itx parts which are more expensive and end up putting them in a case that’s getting close to matx. Not a problem for this case at least.
@RadialSeeker113
Жыл бұрын
@@sagnaik with the nr200p max, I heavily disagree. It's 18.5L and provides better cooling for the gpu and Cpu than any other itx case. Also let's you run a vertical 4090fe with tempered glass and have insanely good temps while doing it.
@deviouslaw
Жыл бұрын
@@sagnaik Getting obsessed with how many liters over all other factors is pointless. Cooling, compatibility, desk footprint, and aesthetics just to name a few things. Case price and availability as well.
@g1zmo85
Жыл бұрын
The “it’s never available” case
@R3I3ELLI0N
Жыл бұрын
This case looks great for entry into ITX! the prices though... I think with my next PC I`ll consider changing to smaller MiniATX or ITX + smaller case.
@MattRubin-ud1ny
Жыл бұрын
Good MicroATX with good IO is hard to come by.
@NLxDoDge
Жыл бұрын
The problem with all the Dan cases for me in the price. In Europe a Dan case with a pricetag of over €200 when you can get something like an NR200P for 80 new and 60 euro's second hand?
@Japgunner
Жыл бұрын
Love the little shot touching the material, that’s the type detail someone really interested in the case would want to know. Bravo!
@HardwareCanucks
Жыл бұрын
Happy to hear 😃 … while others were complaining 😂 about the same shot. -D.
@adamsteinbacher2629
Жыл бұрын
Man, even with all of the great features and fitment, kinda feels like the NR200 is still the case to beat. Especially when it comes to price (got mine for $60 USD after rebate).
@HardwareCanucks
Жыл бұрын
Yeah the NR200 is crazy good value for fitment and compatibility. Just doesn’t feel anywhere near as good quality as the C4. That’s expected tho. -D.
@DaddyBenson
Жыл бұрын
they are completely different cases; NR200 (18L) is ≈4L larger but has much better compatibility. I think the direct competitor of NR200 is silverstone SG14 (19.55L), don't know why it doesn't get much attention though.
@Alby911
Жыл бұрын
@@DaddyBenson - Cases in general don't get that much attention simply because there are so many to choose from. And it's also a component that doesn't need upgrading often.
@imnotusingmyrealname4566
Жыл бұрын
@@DaddyBenson DAN C4-SFX is 17.4L big
@AxleLotl
Жыл бұрын
I would love to see you guys build a custom loop inside this case, the compatibility options are so expansive that it'd be very interesting (and educational) to see what you guys could pull out of the hat 👌👌 I've preordered this case but it won't arrive until August 😭😭😂😂
@fehergergely
Жыл бұрын
Any news about NCASE M1EVO?
@Zalionn
Жыл бұрын
Waiting on that too.
@pranze3484
Жыл бұрын
I don't understand how one can "love working" with cases that have no cable management and where you have to dismantle everything to just access the ram tbh. It's just a building and management/troubleshooting nightmare for the sake of saving 10 liters.
@LastSecBloomer
Жыл бұрын
Again with Apple style non-I/O...stop that, FFS. I've seen 4 liter cases with 2 USB ports and audio jacks, WTF is with single USB port, Dan? You're not a fashion brand, you make housing for computer parts. Just stop!
@BarisYener
Жыл бұрын
Nice review, thanks! I'm wondering if the top fans cause air turbulance noise. But will know that soon enough. :)
@HardwareCanucks
Жыл бұрын
The metal mesh is large enough, so keeping the top fans on low (
@gr4ym4n
Жыл бұрын
Since the GPU fans are pretty close to the top panel, could you get away without any top fans at all?
@GrizzAxxemann
Жыл бұрын
Wake me up when they make an ATX or EATX tower.
@khyron6
Жыл бұрын
I have had a couple of Lian Li itx cases There the best. Needs to drop about 50 buck though. Thanks for the video. You rock. :)
@fredbecker607
Жыл бұрын
Almost $380 at your Amazon link. Is this the scalper you were warning about.
@patrickjoseph3412
Жыл бұрын
220$ ouch . i will stay with my slightly bigger Q58
@victorsi
Жыл бұрын
The NR200 is a well built case for its price. It can fit my existing ATX power supply and 3.5 HDD with or without some 3rd party brackets.
@paulkwak
Жыл бұрын
I would love your take on the Sliger S620 case! The biggest advantage being it can support the NH-D15!
@richeart8217
Жыл бұрын
A dispetto del titolo, questo case non si adatta affatto a tutto. Solo per la gpu c'è spazio in abbondanza: per psu e dissipatore della cpu ci sono gli stessi limiti di ogni case “sff” ossia niente psu atx (solo sfx) e niente dissipatori medi quali il classico Noctua NH-U12S.
@blubadub2843
Жыл бұрын
what do you think will my 4090 Inno3d fit in the case?
@alberta3157
Жыл бұрын
would be nice if you could include GPU thickness fitment parameters in your videos
@oats7
Жыл бұрын
Debating between this or the NR200. The C4 seems to have slightly better cooling and build quality but at almost triple the price. Any thoughts?
@ronstewtsaw
Жыл бұрын
I like that this is smaller.
@miguelmc2289
Жыл бұрын
I have a NR200 and looking at the C4… I mean, yeah it’s a bit smaller and yeah I’m kinda bored of mine… but >200€
@IrregularInterest
Жыл бұрын
Looks to be a fantastic case but not enough to make me change out my SAMA IM01. At only ~22L it's small enough for me to not notice it, and the price has just been too good to beat.
@Zalionn
Жыл бұрын
Bro, only $80? I've been looking for temporary small case under $100. This is probably it.
@cy-one
Жыл бұрын
While I'm happy with my purchases so far (DAN A4-SFX, NCase M1, DAN C4-SFX), the SAMA looks awesome. Would be too big for me, though. The C4-SFX is already going into my "certified big" category.
@Zalionn
Жыл бұрын
@@cy-one I think the size difference between this case and the NR200 is enough to consider it. I am going to assume it wil also take top spot in GPU thermals. My biggest consideration for this case is the X2 280 rad cooling set up.
@cy-one
Жыл бұрын
@@Zalionn Yeah, the NR200 is rather big in comparison. But it's a _very capable_ case for ITX on a budget. And considering the ITX tax, that's always a good place to start. While I have no plans to ever get an NR200, it's a case I've recommended a few times. Also, let's hope my C4-SFX comes at the end of the week :3
Пікірлер: 417