Customer: How much torque did the engine make Steve? Steve: I dunno, your engine broke my dyno. Customer: That'll do
@GregoryGreg87
Жыл бұрын
😆😆 right??
@marcusware712
Жыл бұрын
Customer: I'll take 2
@dannyc1657
Жыл бұрын
LMAO 😂
@macsmitty1171
Жыл бұрын
@@marcusware712 “I’ll take your whole stock”
@mikethatguy27
Жыл бұрын
😆🙌🙌
@erandy0240
Жыл бұрын
From the guys who always test high hp Chevys finally test a Ford and their parts cant handle it lol love it
@GidDree
Жыл бұрын
Ford ain't playing baby 💪👍👏
@danmyers9372
Жыл бұрын
First On Race Day baby.
@stuffandjunkandthings364
Жыл бұрын
I have always said that the weight associated with running a BBF (or any gnarly big block) in a racecar doesn't all come from the engine- most of it comes from the weight of parts strong enough not to be destroyed by the torque. A moment of silence for this guy's drivetrain, for it knows not the buttkicking it is about to receive....
@scottsmith5623
Жыл бұрын
Lol…. Well said!
@chun2s
Жыл бұрын
Actually it's pretty nice that Steve dynoed this engine , now the customer knows that he has to run on low -medium boost .
@badass6.0powerstroke10
Жыл бұрын
I actually went from an Iron Headed Cleveland in my 86 Mustang, to a Aluminum Headed BBF and Lost 105 lbs. Not many times do you go from a Small Block to a Big Block and Lose weight, But at the same time Swapped out the Stock Heavy K Member, Control Arms, Factory Springs, And replaced All that with UPR Chromemoly Tubular components, Along with Coil Over Struts. So I'm assuming most of my weight savings might be coming from the Suspension Stuff, But Those Iron 351 Cleveland Heads are So Heavy, I'm thinking that's were my weight loss mostly came from.
@ssnerd583
Жыл бұрын
...and THAT is THAT, folks....ya make the power, its gotta be strong enough to not fold up like a beer can.......this is where exotic parts made of titanium and CF come into play and that play is always $$$,$$$ or $,$$$,$$$
@ssnerd583
Жыл бұрын
@@badass6.0powerstroke10 ...but what is gonna break in the driveline, next??
@fmboss429
Жыл бұрын
Thank you for showing us Ford guys some attention! Love all your content... 🤯🙂
@Scootermagoo
Жыл бұрын
It took a Ford to break his dyno.. Yup sounds about right.
@brianspangler3771
Жыл бұрын
As a ford guy the title made me grin a little bit, thats a badass engine.
@bradthackston2323
Жыл бұрын
We all knew a ford would make all the horsepowers
@badass6.0powerstroke10
Жыл бұрын
Thanks for showing us Big Ford Fans some Love, that Beast is plenty capable of some Big Numbers, especially with Those Twin 98,s, and 598 Cubes I'm Guessing North of 3500 hp ???
@RustyWells2
Жыл бұрын
Add a thousand and you would be close.
@badass6.0powerstroke10
Жыл бұрын
@@RustyWells2That's why i said "North" of 3500 hp. I probably should've said North of 4000.
@richardkersey8993
Жыл бұрын
Steve, I love all high performance stuff. But I have always been a Ford guy at heart. Thanks for showing this tough looking combo!
@xdboardsurfer
Жыл бұрын
That motor is just gorgeous. Is that even a thing?? Love the symetrical ducting, the headers, billet everything. Whoo!
@kevinfunk83
Жыл бұрын
That throttle body was huge, the merge looked 5 inch so 127mm? I’m not familiar with Ford stuff though so my eyes could’ve been deceiving me.
@barretdunbar9114
Жыл бұрын
@@ajk374 bugs me too. Is silly because the function is unaffected but those reverse scroll turbos make for beautiful engines
@xdboardsurfer
Жыл бұрын
@@ajk374 well, its about as good as it gets with non-mirrored turbos
@deegan727
Жыл бұрын
@@ajk374 You can’t always get symmetrical. As he said the setup was built in the car and there’s things to work around especially with a big block.
@badass6.0powerstroke10
Жыл бұрын
It definitely is a "Gorgeous Engine" especially all that piping, and those Headers are a work of art. I just Love me a BBF !
@brandonmacdonald5553
Жыл бұрын
Beautiful engine!!! Ford power!!!!
@COLLAR01
Жыл бұрын
Gotta love it when the FORD puts a beatin to the dyno.
@Rocksolidbullys
Жыл бұрын
Ya it's rare because they don't last one dyno pull! 🤣🤣
@COLLAR01
Жыл бұрын
@@Rocksolidbullys Idiot
@techs1smh13
Жыл бұрын
@@Rocksolidbullysif ford engine hurt Dyno that Dyno would be Destroyed from BBChevy
@Average_Brad
Жыл бұрын
Guess that dyno wasn't built Ford tough...
@tommybennett451
Жыл бұрын
🤣 🤣
@MrMadtractor
Жыл бұрын
legend
@match360
Жыл бұрын
Knew this was coming..lol
@mavrick351
Жыл бұрын
Lol 😂😂 exactly what I was thinking
@sacrificialrubber779
Жыл бұрын
It broke because the dyno would rather die than do a ford…🤷🏻♂️😂😂😂
@electronicengineer
Жыл бұрын
Wow. Between the connecting "rod exodus" engine and now this dyno... All I can say is that when Steve Morris blows stuff up, he just goes ALL the way! I have never seen anything like what you have put up on display the last couple of weeks here. Unreal. Thank you for showing us all the real deal sir! Fred
@600wheel
Жыл бұрын
Thats what Fords do😎🤘🏼
@CDOGG500
Жыл бұрын
You are the man Steve!! Thank you for taking all the time to explain all your tips!!!
@stevemorrisracing
Жыл бұрын
You bet!
@clintlewis1719
Жыл бұрын
Customer: how much power did my BBF make Steve: all of it
@jonathanparker5375
Жыл бұрын
ONLY 45 POUNDS OF BOOST?!! My God! My old lady wants a BBL and now I want a BBF. MONSTROUS!
@oliverrobey6973
Жыл бұрын
4000 horsepower if it's shut your Dyno off
@bradley3549
Жыл бұрын
Good guess, 3800hp!
@David-yy7lb
Жыл бұрын
That's right them Ford motor's 💪🏿make so much power the dyno can't handle it👍🏿
@bennyfactr6122
Жыл бұрын
Dyno poured a beer out for itself, impressive.
@stephenpage-murray7226
Жыл бұрын
Seeing a lot more BBF stuff in recent years.
@camaromustangmods3327
Жыл бұрын
I bet this dyno is counting the days to retirement... Steve builds some amazing motors.
@dwaynemurphy814
Жыл бұрын
FORD POWER, GETTING THE JOB DONE. LOVE IT.
@Rocksolidbullys
Жыл бұрын
Where is Ford power when you go to a drag strip and 90% of Fords are ls swapped!??? 🤔
@joshuaearnheart2756
Жыл бұрын
@@Rocksolidbullys 🤦🏻♂️ bruh. That’s because LS parts are easier to find and “easier” to work on.
@wudznutt6732
Жыл бұрын
@@Rocksolidbullys It's because most people are too lazy to do it right .
@highkageofthesmokevillage3383
Жыл бұрын
This engine is a piece of art !! And a monster, love it !!
@johnnystanley4469
Жыл бұрын
Really sweet looking BBF, a lot of cool parts, great job Steve and team.
@strydyrhellzrydyr1345
Жыл бұрын
This is an amazing motor right here
@thethepete731
Жыл бұрын
As a Ford guy, I love seeing them mix up the constant stream of Chevy stuff. Especially because it always puts the hurt on. Love your stuff, but it bugged me seeing the turbos labled backwards. Convention in the automotive trade is to label left and right as if you're sitting in the driver's seat, so in my mind they're on backwards lol.
@genemounce8302
Жыл бұрын
THE definition of a 'Sexy Engine'. 😍
@frankensteincreations4740
Жыл бұрын
Damn! That thing sounded way different than the typical bbc you run. Can’t believe how fast it came into boost! I bet that thing makes 3,300 hp…
@scottleggejr
Жыл бұрын
Yea I tried to do this in my head too lol. I'd guess ~2hp/ci @ 600 ci would be like 1200hp NA, and 14.7 = 1bar so 44ish is like 3x that HP so up in the mid 3600hp range??? I want to see the IAT on this monster @ 40psi boost on alky.
@R0cketRed
Жыл бұрын
I was thinking past 4k but yeah basically enough power
@davidwelsh829
Жыл бұрын
35-3600 IS my estimate, at 7k, at 8500 I bet it pushes 4400hps, 4k trqs
@RustyWells2
Жыл бұрын
@@davidwelsh829 This is the closest guess I've seen so far it's still a little low.
@rwcasto
Жыл бұрын
Steve says, “ it was making big power before it blew my dyno ” Big power to Steve- prolly in the 3800 top 4000 range 😅
@whataboutbob7967
Жыл бұрын
Fix it - break it - fix it - break it....
@BMWturbotim
Жыл бұрын
Looking all your movies, greetings from Holland.
@Frietpan
Жыл бұрын
kaas
@stevemorrisracing
Жыл бұрын
Awesome! Thank you!
@OpenLogicEFI
Жыл бұрын
Customer: How much power does it make? Steve: Yes.
@billclark5943
Жыл бұрын
Nice, high quality piece with attension to detail
@AntiPattern328
Жыл бұрын
That is one crazy engine!!
@TheSteve1175
Жыл бұрын
Completely understand, don't sweat it 👍 love your work ✨️
@bigcountrysgarage2.030
Жыл бұрын
The sound of those turbos
@Chris_Harris
Жыл бұрын
Good lord, look at how beautiful that thing is!
@Huhwhatwhere4324
Жыл бұрын
My dream setup for my 69 Lincoln continental 4 door. Would make the car around that gem.
@danielpotts9622
Жыл бұрын
You are the Man Steve!! I luv the Actual real Life atmosphere in the shop. The Real Technically information, An Keeping it Real Bro.. 💯💪🏁🏆
@colingamache5629
Жыл бұрын
“It probably makes pretty close to what you think it makes” haha
@zazz69ed
Жыл бұрын
One of my old bosses used to say "If you ain't fucking shit up...you aint working hard enough.." LOL so we see you are just working hard Steve!!!
@scottmarshall6766
Жыл бұрын
Fixin stuff Steve! 'tis the life of the small businessman....
@mrd.808
Жыл бұрын
Boss Mr. Morris, Any plans of making an engine building book? I think your book with your knowledge will most definitely sell.
@srharris88
Жыл бұрын
Whatever HP it takes to explode a dyno, that's what I'm looking for in an engine.
@donaldhalls2189
Жыл бұрын
Excellent engine might even give yours a go, 🤣 thanks for showing, great video, all the best to you and your loved ones
@monera9675
Жыл бұрын
Customer: How much torque did it make Steve Steve: yes Customer: SOLD
@Joe.G
Жыл бұрын
FORD 🔥
@kentbeitel9966
Жыл бұрын
That engine is a piece of art!👌🔥I would just sit all day and look at it! I can’t even imagine how much all that costs.. 🤯
@edmelungeon2239
Жыл бұрын
Probably close to 100K. And probably close to 4000hp.
@kentbeitel9966
Жыл бұрын
@@edmelungeon2239 that’s wild! I wish I could afford something like that
@bobstitzenberger1834
Жыл бұрын
@@edmelungeon2239 , i bet closer to 120 than 100
@RustyWells2
Жыл бұрын
@@bobstitzenberger1834 You would be right.
@RustyWells2
Жыл бұрын
@@edmelungeon2239 Higher!
@professorgreenlight1361
Жыл бұрын
Dogs are the best remedy for bad days. Not a day goes by my dogs don't make me laugh or smile.
@Calvin-Nelson
Жыл бұрын
So the only iron bits in that are the crank, the sleeves, the main caps, the pins, and the bolts! That's wild! Almost easier to list what's not aluminum. Lol
@ainsleyhenderson4228
Жыл бұрын
Understand your pain. Uk fan.great stuff.
@strydyrhellzrydyr1345
Жыл бұрын
Now this is a race engine...
@MrSkinz
Жыл бұрын
Imagine getting all these parts, you put it all together and the owner says he want to put it in a Mazda Miata 😂
@JimmyCasket02
Жыл бұрын
I’d shake his hand and wish him luck in his next life
@Spad68
Жыл бұрын
Love your video and stuff but I love fords and I for one would love to see allot more stuff like this . From the ford camp .
@deputy_Nico
Жыл бұрын
Beautiful engine, the things I'd do to afford something like that
@samhammer1134
Жыл бұрын
Do it!
@fast97z24
Жыл бұрын
Right? I swear machining billet parts needs an only fans account because it's so sexy 🤣
@turbolife5912
Жыл бұрын
When I listen to your intro every time I'm expecting you to say I'mSteveMorris " And your not " love your enthusiasm 🙏🏼
@cliffcorbitt9494
Жыл бұрын
A NELSON ENGINE BRAKES THE DYNO EVERY TIME .
@rhetericalpha
Жыл бұрын
Beautiful engine. Side note out of all the ways I've heard water pronounced... yours in my favorite.
@600wheel
Жыл бұрын
Thats why I’m a Ford guy for life! God damn that is prettier even than mine
@badass6.0powerstroke10
Жыл бұрын
Me too Ford For Life. Always have been, Always will be.
@mrnastytime420
Жыл бұрын
Enjoy your "pride" with your Ford's fellas. It's ok to be LGBTQ+ nowadays.
@badass6.0powerstroke10
Жыл бұрын
@@mrnastytime420 That got nothing to do with it, if that's your cup of tea, have at it, It ain't nothing new Nowadays. As for for being a "Ford guy for life" that's just standing behind your Brand Preference, No matter what, for instance, if Bob Glidden had a bad weekend at a Race somewhere, couldn't get his Dominating Ford running right for some reason and qualified at the Bottom of the Field, and didn't do great during Eliminations, Do you think he jumped ship and went with GM Power ? No he wouldn't, Cause he's Ford for Life, like many of us, he knew what the Best was back in the early 70,s and he just stuck with Ford, granted 1 year he did run Mopar, But was Always a "Ford Guy".
@CoyoteFTW
Жыл бұрын
@@badass6.0powerstroke10 - not just Glidden tho there was allot of guys who ran Ford and won allot Rickie Smith, Dyno Don even Mickey Thompson
@badass6.0powerstroke10
Жыл бұрын
@@CoyoteFTW I Know all them Ford Guys, Jon Kaase a Ford Legend when it comes to making BBF,s run with the best of em. Learned from working with Dyno Don.
@patrickkennedy2533
Жыл бұрын
Thumbs up from this Ford cat
@charleshenshaw9099
Жыл бұрын
Every drag racers favorite saying, "more stuff to fix".
@fordnut4914
8 ай бұрын
You need to send that to me for Christmas gift ill pay shipping cost tell the customer it got lost in the mail my ol lincoln needs some love😂😂..
@minibikemadman
Жыл бұрын
Man thats a nice mamma jamma
@bryanluntz1603
Жыл бұрын
Hopefully an easy fix Beautiful Ford power
@ssnerd583
Жыл бұрын
"We're gonna need a bigger dyno....."
@426Roadrunner1
Жыл бұрын
High Steve. Love you attitude on the breakages! Just like your pooch at the end of the video, "What, Me worry..." LOL!! Great stuff man.
@rob183
Жыл бұрын
Hey Steve absolutely love your videos and hang out for them all week. One thing I also love are your mannerism's and quotes that you say throughout your videos, I am a fan of Billy Bad Boy and laugh every time I here it. Any chance we will see that on a Tee shirt or Hoddie at some stage. Anyway thankyou for the great content and tech.
@stevemorrisracing
Жыл бұрын
😂
@grahamwells4223
Жыл бұрын
I bet that engine goes as good as it looks. Shame about destroying the dyno! But I bet it’s going to destroy a lot more with the power it has. 🔥☄️
@switz10
Жыл бұрын
Wow that must have a wild torque curve
@redneckrebelzracing2891
Жыл бұрын
Customer: How much power did the motor make? Steve: Yes
@robertkington2084
Жыл бұрын
Dyno company says the engine dyno comes with a 2 year warranty (except for Steve Morris)
@rooster7658
Жыл бұрын
Now that is a work of art
@stormyyoung6344
Жыл бұрын
That's one good looking turbo and intake setup
@RyanCafferty
Жыл бұрын
Gotta love torque!
@tjeffjenkins6226
Жыл бұрын
NICE, what an engine! Your dyno will just Figure On Repairs Daily if you keep running that thing up on boost...
@monolyth1999
Жыл бұрын
Dyno valve delete in 3...2...1
@kilgorefamily76
Жыл бұрын
Tough break on the dyno, maybe get some new billet water valves - just not from the rod-x guy.
@garykarenmcgruther6386
Жыл бұрын
🤣🤣🤣🤣
@BassManBobBassCovers
Жыл бұрын
It's kind of funny that in the last dyno video, I commented "it was surprising the dyno didn't blow up"... These engines are crazy!. 😮
@masterSe7en77
Жыл бұрын
Oh shit I was watching to your video thinking this was some noob engine builder lol I didn't even see who's channel I was watching it just popped up on my feed and then at the end I hear "anyway, this is Steve Morris" I was building a little metal puzzle thingy here and I stopped and looked up and was like oh shit like THE Steve Morris??!! I'm a huge fan Steve, you build some bad ass engines brother!
@jeremymullen5378
Жыл бұрын
🔥just a beautiful engine setup sm🔥👊🔥⚙️🏍🔨
@vehdynam
Жыл бұрын
Now that is different ! Sorry about your dyno. Another good video. Thanks.
@reneescouch9035
Жыл бұрын
Awesome video man!
@fangie0210
Жыл бұрын
Dewey is just thinking...."stupid humans should be playing with me, not stupid car motors!!!!":
@user-oj4xh8cg2l
Жыл бұрын
you're going to need a bigger dyno ... er, and me my coat. thank you for sharing all the details of real life at the shop
@TylerDuysen
Жыл бұрын
damn 598ci exploded the dyno ford has a factory 554ci bbf(went in fire trucks dylan mcool has one) and theres a aftermarket 632bbf as well imagine those twin turbo theyd shred the dyno
@jimkillen1065
Жыл бұрын
I use to rebuilt water brakes on drilling rigs . They were similar to these I think.. just a lot bigger . That engine loosing load reminds me of a jet boat that comes out of the water with your foot on the throttle. It seems to be hard on valve train and your pocket lol
@rickjohnson1632
Жыл бұрын
Hey Steve , don’t sweat that set of rods that crumbled. It was a freak thing. Has to be chemistry of the metal. Everybody that knows you knows you use quality only parts. They also know you stand behind you product 👍✌️
@IAMMAN3.4
Жыл бұрын
Looks like it has an old throne crown from ancient Egypt on it's in take
@JohnRoberts71
Жыл бұрын
Great content thanks for sharing
@GnadFlea
Жыл бұрын
Did Steve say, "my water broke!" ? LoL! Great video. Sorry you've got the added work.
@nolancarpenter7882
Жыл бұрын
Literally off the charts
@ChainsawFPV
Жыл бұрын
Damn. I am going to do my AMC 360 this winter and I would be happy with like 500 horse. Lol
@boronin10
11 ай бұрын
That thing looks menacing 😂
@donalddarbonne779
Жыл бұрын
Guessing 4500 hp.
@HOTRODPOKEMON
Жыл бұрын
Nice channel love it engines cutting edge stuff
@kevinwest3689
Жыл бұрын
I don't know what my problem is but when somebody says uh...um... over and over when they're speaking, I feel like someone has set my hair on fire. A man says what he means and means what he says, so... don't spit it out until your brain is ready. ✌
@tomhamilton9140
Жыл бұрын
Perfect piece for Mike Murillo Street Outlaw Mustang 😎
Пікірлер: 476