I've wanted to make this bench top moxon vise for a couple years now. I finally made it but I managed to screw it up pretty good while doing so. Fortunately there were some good tricks to be shared on the fix. I used hardware from Benchcrafted for mine. That can be found here: www.benchcrafted.com/moxon
If you like what I'm doing here and want to support my channel, take a look at my Patreon page!:
/ coffeycustombuilds
You can purchase and download the cut list for my vise here:
www.coffeycustombuilds.com/sh...
You can make the vise with this much cheaper hardware found here: amzn.to/41dGHq4
But the nut mortise will be a different size. You can use the method I used for the "fix" to make it just right.
Sili Glue Roller with Sili Glue Tray: amzn.to/3L1haIk
Setup Blocks Height Gauge Set: amzn.to/3MtOUT0
Links (These help support my channel):
Totalboat: bit.ly/3IEHrOr
Starbond: bit.ly/3ITPpUy
MircroJig: bit.ly/3XecHbP
Magswitch: bit.ly/3H6uhJl
Bits & Bits: bitsbits.com/ref/6233/
Bidwell Wood & Iron: bit.ly/40geRJL (Use code COFFEY10)
Jobber: bit.ly/3iPzZps
Grabo: order.grabo.com/u/Coffey
Coffey Grinds: bit.ly/3GKL6rR
#woodworking #workbench #diy
00:00 Introduction
00:11 Parts
00:23 Breakdown
01:00 Milling
01:33 Reference Cut Tips
02:19 Panel Glue Up
04:05 Finish Cuts
04:33 Mark Up
05:15 Holes and Mortise
08:17 Test Fit
09:38 Surface Prep Before Final Glue Up
09:51 Front Chamfer
11:10 Layout For Joinery
14:59 Attaching The Cork
16:34 Dog Holes
17:45 Test Fit...
18:15 The Fix...
19:35 Reference Template
20:32 Final Hardware Fit
Негізгі бет Тәжірибелік нұсқаулар және стиль This Vise Changed How I Woodwork
Пікірлер: 120