Super convincing indeed, but you know how much of us laptop shredders you would amaze actually trying to achieve the same only with plugins. A video on that would be awesome. Hats off for your work sir!
@HASHIRA6505
Жыл бұрын
@@FlyingMachete take you're DI and spectrum match it to another guitar. I found free multi tracks online and used those , I have the spectrum of a bare knuckle aftermath and a Seymour duncan nazgul . Anyways spectrum match then flip the phase, into a new amp and IR that are close in character. print you're amp tone then flip youre phase again. Use two different amps and IRs but make sure they are close enough to compliment each other rectifier and 6505 are great combos as well as driftwood purp nightmare and a 6534+ ,all amp sims . But this method works well I've tested on two tracks already
@sonidojamon
Жыл бұрын
If you "un-delay" the Mimiq double tracked emulation signal a few miliseconds, you'll get a more realistic/balanced double track effect. Mimiq's algorythm adds random pitch and delay changes to a copy of the original signal (higher "tighness" values add longer ms delays and wider pitch differences), but it will never add a negative delay (as that is "scientifically" impossible). So the idea is that you "record" that processed signal into a track and then zoom in untill you can compare peaks against the original signal side by side and move the audio clip back a few ms manually until they are aligned somehow (some peaks will happen before the original, and some will be after, that's the sweet spot!). This way you won't get the typical "unbalanced" volume effect that results from our ears perceiving the "sooner" signal (original DI) louder. When you do this, the double track effect is undistinguishable from a real double tracked recording. You can't do this live, but it can easily be done when recording with this quick post-processing trick! Try it out and let me know what you think! 😉 I'm not a big fan of polarity switching, as it can cause phase and/or mono compatibility issues. I also recommend to repeat this process 1 track at a time with the same settings. You will always get a totally different resulting double tracked signal from the same original track, as the MIMIQ pedal's algorythm is constantly applying random changes. That's why it works so great when used live!
@gabrielraphaelofficial
Жыл бұрын
you said one track and I hear bass ;)
@Defensive_Wounds
Жыл бұрын
The riffing and some of the drums bass all mixed in sounds a lot like 'Bloodbath - Eaten'! That is a compliment!! 22:15 - both my grandmothers are dead, so are my grandfathers...lol Although, my great grandmother was around until my 16th bday and I just barely remember my great great grandmother when I was 4!
@My2Drumsticks
Жыл бұрын
Ahhh Metal. The never ending journey to the unobtainable perfect guitar tone. When you think you’ve found it, you hear someone else’s guitar tone you want more.
@KohleAudioKult
Жыл бұрын
The Sisyphos part of every metal guitarist‘s life 🤪
@stingylizard
Жыл бұрын
True! That's why I gave up metal guitar. I unwittingly witnessed Dimebag/Pantera in a tiny bar with only 3 patrons,counting myself. Afterwards,I could never get a bigger,better monster tone. My guitar sighed like an un-fulfilled woman. So now I just play blues or country🤣
@cristl1375
Жыл бұрын
especially when you fuck around with your settings and forgot to save them...
@JimmyKlef
8 ай бұрын
I fell for it for so long too. As an amateur everything… (musician / audio engineer / everything like everyone else these days) … it was ridiculously grueling. Because trying to get an engle sound on zero money will basically just ruin your soul. Lol. Everything is pretty different now… we can afford at least some of the best stuff even pros use these days so better sounds can be achieved easier at home now. But chasing tones like Danny Carey’s drums from Lateralus and guitar tones from super expensive studios and meshuggah and all that… yea. Not so easy in garageband in your parents basement on like, the worlds cheapest shit. Anyway, moral of the story is now when I listen back to my old recordings… literally the only music that still stands was the stuff I recorded that was just all me, and using whatever tone was quickly inspiring and worked. Most of anything i worked on back then in which I tried super hard to get super modern “great” amp sounds and such all sound like a kid exploring shit he doesn’t know… and not so musically compelling. The songs I thought were so cool that it didn’t matter much how i recorded it, but rather needed to get down the flood of ideas I had… those are some of the only ones that still stand. The song is just too cool to remotely care i didn’t shave off the top end sizzle-slush in the distortion. It literally doesn’t matter in so many cases. And honestly some of the absolute best tones i got, were just totally me and almost haphazardly. I would obviously try to record pretty well no matter what but yea. I really really recommend people just being themselves. Don’t chase anything too much. Your creative self will get lost. It really will. There’s nothing wrong with making sure you have a great sound but do it in chunks or something. Work with others who will help. Get feedback. And stick to it for a while and only change shit if you actually hear a change or it genuinely sounds bad. Let others bother with the super microscopic stuff.
@xanataph
Жыл бұрын
One of the oldest tricks they used to do stereo reissue of mono records back in the day was to just filter the LH & RH channels differently, and usually complimentary. Like scooping the mids in one channel a bit and boosting them in the other. Or if you have a graphic EQ, boost one band and then cut the next, doing the opposite on the bands on the other channel. That kind of forms a comb filter and you get a pretty wide effect without even any time domain stuff.
@dirtyandnasty9011
Жыл бұрын
22:29 Reference 22:35 Polarity trick 22:41 Mimiq pedal 22:47 Mimiq + Polarity 22:53 Mimiq + Polarity + different amp settings 22:59 Mimiq + Polarity + different amp settings + different mic position 23:05 Mimiq + Polarity + different AMP 23:11 Mimiq + Polarity + different AMP + different CAB The Mimiq (even alone without the different amp/cab/settings/polarity) sounds a tiny bit looser than the reference but that makes the sound a little more open. For less technical/fast stuff I think it's even better than double tracking. My only issue with that is I prefer the old school sound where both guitars don't play exactly the same way, ala 90's Slayer where you clearly hear it's not the same guitarist on each side. Plus you can add depth to your song with harmonizing or playing a different version of the chord etc. Not the actual standard, but I hate the modern sound.
@Chiavenatto
Жыл бұрын
Yes Bro ! I love the real sound of two guitars playing two different things. But this maybe Will be an alternative to records guitar alone sometime. Sorry my english
@dirtyandnasty9011
Жыл бұрын
@@Chiavenatto Anyway Mimiq + different amp is a perfect solution for live one guitarist bands 👍
@krokmiten
Жыл бұрын
Shouldn't your Dry knob be completely to the left for a unity gain signal?
@skaldlouiscyphre2453
Жыл бұрын
What you do is still record a left and a right track, but use this to make sure you've got two takes of the left and the right for every single real take.
@SamBrockmann
Жыл бұрын
Well, you just made my fucking day. Do you know how long I have been trying to do this?! Years. Goddamn years. Over 15 fucking years. And now you just saved me hours.
@KohleAudioKult
Жыл бұрын
Same here man! You’re welcome! 🤘❤️
@theromulux3725
Жыл бұрын
Never DOUBLE TRACK again!??? ..... Glenn Fricker will be Furious.....
@robzilla69
Жыл бұрын
Isn't he always? 😂
@femali
Жыл бұрын
Never double track guitar again on your songs with drum samples.
@KohleAudioKult
Жыл бұрын
I’ll let him know!
@INDOMINION
Жыл бұрын
@@KohleAudioKultTell him that preamp tubes color the sound and see if he pops 😂
@Tt-nt1iu
Жыл бұрын
I don’t really think Fricker is running a recording/studio channel anymore. It’s more of personality show. I come here to actually learn how to record/do it better. Not a dig against Fricker. It just feels less and less recording focused these days.
@karlhowe5181
7 ай бұрын
Congratulations, your the first person I've ever seen or heard to obtain a truly convincing double. In fact I think your final result was even better than the true double . Amazing and bewildering 😁👍
@cliffordballiet4181
Жыл бұрын
My takeaway is even if I didn't use the mimiq, the "added chaos" techniques are still valid for widening the stereo field of the regular doubled guitar tracks.
@KohleAudioKult
Жыл бұрын
Sure!
@hoborec
Жыл бұрын
This is awesome! Thanks so much for the shoutout and huge kudos for taking it so much further 😍
@KohleAudioKult
Жыл бұрын
I forgot to add the link to you and the Kourse! 🫣 will do now
@hoborec
Жыл бұрын
@@KohleAudioKult damn youuuuu
@BeanSniffles
9 ай бұрын
The Mimiq is great. I use mine as a signal splitter going into the front of a Victory Super Kraken and a Mesa Badlander in a stereo setup. I set dubs to 1 because in stereo you don't need to fake it. Tightness is set around the middle somewhere. One amp gets the dry signal and the other gets the Mimiq'd signal. If you turn down the dry volume so you only hear the Mimiq'd amp, you can hear what the effect is doing. It feels like it's almost adding a couple milliseconds delay. It doesn't hinder your playing, but you can very subtly feel it. Of course, the whole point is to have dry and wet both up and running into two separate amps. It sounds colossal. And it's not just great for metal sounds. It adds a bit of width to a clean sound before it even gets to reverbs and delays.
@JorisGriffioen
Жыл бұрын
Interesting idea: with the polarity trick an SD-1 might have more effect because it's clipping asymmetrically.
@kamilsliw19941
Жыл бұрын
I not only appreciate you showing us this technique, but just how many ideas/steps you've showcased! Amazing!
@ayeapprove
Жыл бұрын
While I like the idea, I think recording doubles is essential for a good perfomance. I think this is a technique that works well for emergencies, but the stereo image on a real double track is just better and more natural.
@nikht0
Жыл бұрын
Hey, this gave me some ideas, thanks! So I did an experiment and managed to make really convincing stereo guitar tracks from a mono DI totally in the box with amp sims with no audible phasing or artifacts. Here’s how: 1: Flip phase on mono DI. 2. Drop the pitch 2 semitones (in Ableton I used the “Complex Pro” algorithm, but I think most DAWs use the same algorithm) 3. Resample or bounce your phase flipped, pitch-shifted DI. 4. Raise the pitch back up 2 semitones. 5. Resample or bounce it. 6. Add amp sim, flip phase again and pan. I even used the exact same preset and cabinet settings on the amp sim on both the left and right tracks and it still worked, I am guessing because the re-pitching algorithm somehow adds enough variations that it eliminates audible phase issues. I also tried putting the LFO tool on Voxengo’s free Sound Delay plugin to randomly sweep the delay settings on the new DI by between 0 and around 40 samples, and it also works but is very subtle. I'd like to hear if anyone else can get similar results.
@AndJesusSayWTF
Жыл бұрын
So you detune then retune your di before the amp sim ? What about after the amp sim ? I will try that.
@nikht0
Жыл бұрын
@@AndJesusSayWTF I just detuned it and re-tuned the DI before adding the amp sim, but I did leave it out of phase, re-reversing phase after the sim. It appears that the pitch algorithm is not able to perfectly reverse whatever micro-changes it originally made to the waveform when pitching it down, and those subtle differences seem to be why it works. The reason I didn't do it after the sim is because I assumed the distortion would sound weird. But maybe not! Let me know how that works out.
@maxduncan4473
Жыл бұрын
@@nikht0 No, you're definitely correct. I've done the same thing; it works. I found that even one semitone either way works fine. Mind you, the problem is that pitch-shifting plug-ins have unfortunately gotten too much more accurate over the years and the 'micro-changes' you mention are getting ironed out. I just use an ancient BOSS Pitch-shifter pedal and the result is exactly how you describe.
@nikht0
Жыл бұрын
@@maxduncan4473 I didn't use a plugin, I used the re-pitching/time-stretching tool that comes with Ableton Live, which is actually licensed from Elastique. (I used Ableton Live 11 and for now at least, it still works). Other DAWs that have the exact same Elastique tools built into them are Logic Pro, Cubase, FL Studio, Reaper, Bitwig, Tracktion and Cakewalk. It's pretty cool that this works so well, eh?
@quirijnfoeken7520
Жыл бұрын
I tracked with the Mimic pedal once that was going into 2 different Orange amps/cabs. I remember we kept the tightness at zero because we couldnt find a setting that worked as we wanted. However, the 2 amp setups already did enough. This was on leads though. We double tracked the rhythms.
@billyhughes9776
Жыл бұрын
I just want to say I really appreciate the amount of time and effort you put into doing videos like these -- you're a really great teacher. I think I liked the the results with the Black Star reamp the best -- at least to me ears. Once again, thanks Kohle!
@KohleAudioKult
Жыл бұрын
Thanks for the kind words!
@Krypt666Norway
Жыл бұрын
Used Mimiq Doubler in live settings with Tonex direct and the on-stage amp, panned left and right. No complains… 😬
@kurtly
Жыл бұрын
I use a Mimiq live and have recorded demos with it. You can definitely hear the phasing and lose some bottom end. I’ll try a couple of these ideas and see if it makes a difference live!
@DavePowell666
Жыл бұрын
Great to see you taking this further. I don't mind recording doubles, but quads not so much, especially on fast picky riffs! I would certainly appreciate a time/effort saver like this! 😎
@KohleAudioKult
Жыл бұрын
For Quads this should be even easier! I don't think I will record quads anymore unless someone forces me to.
@richardrofacale4557
Жыл бұрын
@@KohleAudioKult Kohle, are you giving prizes away on Telegram as depicted above in the comment above? I had no faith in it but I thought I'd check with you in case I did win a fabulous prize.
@POGFROGULPOP
Жыл бұрын
@@richardrofacale4557 It will be a scam if its anything telegram. Quite common and hard to keep blocking as it comes back in a slightly different form.
@insertanynameyouwant5311
Жыл бұрын
nice now please give us Brunetti profile for Neural amp modeler so we could try it lol. I might buy it actually. No one modeled that amp yet
@ConnorEngstromMusic
Жыл бұрын
Oh man, this might be a game changer! Thanks for all you do to share this awesome information!
@TheNathanMChannel
Жыл бұрын
I enjoyed the periodic updates on what was going on with the back of your chair.
@rome8180
Жыл бұрын
This seems like it's worth it if you only have a single track to work with. But considering the time spent dialing in amps, reamping, moving mic positions, etc., it seems like in many situations it might be easier just to play the part multiple times. Of course, that's not always an option. And for quad tracking, I think it's definitely justified. I'm going to order that pedal.
@KohleAudioKult
Жыл бұрын
It usually takes days to do a proper rhythm guitar session, to play all the doubles perfectly. Moving a mic and twisting some knobs takes me three minutes.
@necroticpoison
Жыл бұрын
Sounds pretty damn good. Sounds a bit like most of the note information is on left, on headphones at least. Would love to see a Driftwood cab vid.
@aperfectnoise
Жыл бұрын
When i discovered the mimiq i wasn't able to afford it so i tried stuff and figured out that a panned delay (with supershort time and low feedback) on mono guitars sounds insanely good! dry gtr on one side, fake double on the other, no need for fancy plug ins, any delay can do the job!
@LaitoDan
Жыл бұрын
It is called Haas trick and it will sound phasey in mono, as you don't change the source signal, only shift it a bit
@jgmopar
Жыл бұрын
I bought a Mimiq pedal when they first came out for my stereo setup. I have never used it for recording though so this is exciting.
@jfo3000
Жыл бұрын
Same here
@josuastangl7140
Жыл бұрын
Do you run two different amps/cabs as well? How much of a difference does the pedal make in addition to that? I might get one for live shows as well, I'm the only guitarist in my band, already running a stereo setup.
@jgmopar
Жыл бұрын
@@josuastangl7140 Yeah I use two different amps/cabs, One a little brighter and one a little darker. I used to split it through a stereo chorus pedal until the Mimiq came out. Made a huge difference sounding like two separate guitars.
@josuastangl7140
Жыл бұрын
@@jgmopar damn maybe I have to get one. John Browne of Monuments uses the Mimiq model in the Helix live for essentially quad tracked guitars.
@cederickforsberg5840
Жыл бұрын
This seems very useful when putting out livevideos of a band with just one guitarist!
@v4ld3r5
Жыл бұрын
I do this when playing live (I’m the only guitar player in the band). Dual amp setup, stereo out with Helix LT and at the beginning of one side I use the Double Take (which is pretty much the same as Mimiq). I haven’t tried the phase switch tho, that can be fun. Thx and cheers! 🍻
@assshakerstudios549
Жыл бұрын
Done almost all of that, cept for the phase flip in and out. Never heard of that before. I've done it most of the time the super old school way. Where you can't get the guitarist back into the studio so you use the guitar sound, come out of your monitors, mic your monitors, use a different preamp, and Bob's Your Uncle!
@slayabouts
Жыл бұрын
Keeley also makes the 30ms pedal which is an automatic double tracker and could be used to do the same and also comes with standard chorus and reverb for about $80 more. It's only got one output jack, but I think it can work in stereo and will split the wet and dry signals with a splitter cable
@josuastangl7140
Жыл бұрын
This is quite amazing! John Browne (as the only guitar player in Monuments) uses the Mimiq model in the Helix for quad tracked guitars live. Rabea Massad also used the Mimiq for his Toska project, but since got rid of it, because he thought it sounded phasey. I'm also the only guitarist in my band and I'd say I have a pretty good stereo setup going in my modeller (Quad Cortex, always running two different amps and cabs). It seems to be more than just a sample delay. So... should I try the Mimiq? How big is the difference between different rigs with and without the pedal? I'd love to see that. Also I think I might update all my patches to make use of the polarity trick. These videos are gold, especially for one guitarist live bands, danke!
@nelnich4445
Жыл бұрын
I've always panned hard left hard right. Off set them slightly with timing, detune a few cents in melodyne and change the IRs. It seems to work unless I'm missing something.
@DaBlackAndWhiteStudio
3 ай бұрын
can i thank you for the nudging trick for the 2 mics !!! its awesome !!! completly changes the sound
@KohleAudioKult
3 ай бұрын
You’re welcome! Next week there will be another video about this. Stay tuned!
@Elephanttalk1985
Жыл бұрын
I have the Mimiq pedal and is awesome, live is a godsend when you have only one guitar. But I strongly recommend to check out the DOUBLER plugin by Nembrini Audio. It blows the Mimiq out of the water, you have more control and the slight timing and pitch changes happen on both channels (on the mimiq is just the right channel affected, the left is the dry signal).
@richardlise2271
Жыл бұрын
If you set it to 2 dubs, and turn the dry all the way down you can make the Mimiq affect both the left and the right signal simultaneously
@JonManProductions
10 ай бұрын
Ehhh it looks like the Nembrini doesn't really do the exact same thing the Mimiq does when its in stereo... another KZitemr did a deep dive into the specifics and the Mimiq does some real crazy shit with the outputs left and right, not merely just delaying one track or another. Unless you'd wanna show that the nembrini can do the exact same thing then idk.
@sebrura
2 ай бұрын
Why do you comment when you havent’t even tried the Nembrini? It does not merely just delay one track or another. It does the same thing Mimiq does. Try it, it’s free for 14 days.
@RobbDizzl
Жыл бұрын
If you have the cabs, amps, mics, inputs you could just track it with mimic pedal and save yourself the reamping. Or just record the mimic DI and run it through an amp sim plug-in.
@ronnielobosmith4870
Жыл бұрын
Scooping and boosting your mids using two amps and cabs with an A/B pedal and then reversing which ones are scooped and reversed and re-recording another signal path and then blending those with everything else that you're already doing
@Stretchwreckedem469
Жыл бұрын
I’ve had a really cool idea involving the Mimiq where another guitar player and I would both play through a two amplifier setup to get a quad-tracked sound in a live situation. I feel like it would be a really cool setup for a live situation in order to create a massive live sound. I’m sure I’ll run into issues here and there but I feel that it will be a really interesting way to make a live set sound even bigger than from just playing through one amplifier. 🤔 blending different amplifiers, different speaker types, etc.
@damndoor3570
Жыл бұрын
I attempted something similar with an aby pedal when i used to play live. On my side i ran path A into a Marshall head and a peavy cab. Path B went into an engl head and a Frankenstein cab. Our other guitarist ran his into a bogner head and a Marshall cab and his other path into a peavy head and blackstar cab. Not sure if it really sounded quad tracked but you couldn't help but grin uncontrollably when playing through either rig lol
@PaulEubanks
Жыл бұрын
I absolutely love this approach, but one thing I've wanted is to do a similar thing with vocals, and I learned a trick doing it with vocals that I was able to back-port to guitar with similarly good effects. With vocals you don't have a guitar amp and cab/IR, but what I found is you can also do the vocal doubling trick using a VERY short reverb IR, and doing the phase flip trick before and after the IR. And then all the normal slight EQ/compression moves to create space between the original and duplicate track. And you can also use the IR reverb trick with one of the guitar tracks too, you just have to make sure the reverb IR you use is VERY VERY short.
@andresilvasophisma
Жыл бұрын
Interestingly enough yesterday I tried some stuff with the Mimiq and a Digitech HM2 (intelligent harmonizer). Basically you can plug your guitar into an HM2 and get harmonized guitars in stereo, you can put a Mimiq after that to slightly offset the original guitar and the harmonized one. It does an ok job, specially if you're in a live situation and don't have a second guitar player.
@andresilvasophisma
Жыл бұрын
The HM2. kzitem.info/news/bejne/rKCD35iKqWWLn6Q&ab_channel=OscarJordan
@thegimpsometimes5937
Жыл бұрын
I have a similar approach to faking double tracks, except i use a shallow water set on 100% wet with no gate and extremely subtle modulation. I reamp the signal with only that pedal going through whatever amp and it gets me where i need to be.
@stm113
Жыл бұрын
I know you said that it works better with real amps but can you make an appended version of this video for those of us who used Fractal Gear or plugins? Also, the doubler in Line 6 Helix is pretty good as a stand in for the Mimic.
@tusharjamwal
Жыл бұрын
Audio Assault has a multi take plugin. And they have a double track 'simulation' option in almost all of their guitar plugins. Just get one of those, it's pretty good. It has the same limitation as this method in that it breaks down quite a bit in mono.
@PetarMakesNoise
Жыл бұрын
If you have Axe FX 2 or 3, just buy Mimiq pedal, and insert it into loop, add as a block between drive / tube screamer and amp, and you'll get the same results. Still, due to linearity of the digital models, it's best to use real amps, since tubes tend to add that chaotic variable into the whole thing, makes the difference between the takes even more obvious = more separation but still tight. I found that this doesn't work the best with modelers. I have Axe FX 3, and 3 amps, and amps work better.
@Defensive_Wounds
Жыл бұрын
What I do to do this is have 4 stems, 2 are high pass filtered and inverted/flipped opposite to the 2 un-high pass filtered stems. I then on all 4 of them zoom right in and move the right speaker guitar stems slightly to the right to technically be ever so slightly out of sync to the left ones. No panning or phasing required. It sounds like 2 guitar recordings plus goes from left to right and sometimes (due to the quieter inverted high passed stems) right to left on occasions. No fancy plug ins or anything. Just trial and error on my own to work out a way!
@BLACKSYNTH
Жыл бұрын
This pedals been out for yonks. I was going to get one years ago. I generally use 2 different guitars for tacking, One thing extra you could do is used a chorus on one but set at a level you don’t really hear. That really changes up the waveform for extra width. 💪🏻🤘🏻
@kutnersuicide
9 ай бұрын
Don't know how I managed to miss this video. I mentioned the Mimiq pedal in the comments of your "DOUBLE tracked STEREO GUITARS with just ONE DI track" 6 month ago. I don't know which method I prefer so far but to my ears, the mimiq works better using two different amps or gain structures. If you use the exact same sound, there will always be moments the image shifts quickly to the center which is annoying and ruins the purpose of the pedal. I recently found the Amp Hub plugin from STL has a doubler that does the same thing more or less but it sounds a bit more "blurry" for lack of better term. Edit: Ok just finished the video... I need to try you additional tricks!
@RudalPL
Жыл бұрын
I still think that double tracked guitars sound best. Maybe it's just me. I don't know. Would I tell the difference if someone would play me a song and asked if it's a single DI or not? No. Definitely no. As for someone who does his own stuff in a living room the whole trick is a bit unobtainable but it's good to know it exists. You never know when you might need it. 😉
@AdamMGuitar
Жыл бұрын
Been chasing this fake double/stereo sound for years and Mimiq finally got me there. I use it in the loop of the Axe-Fx, placed before two different amps and cabs and it’s awesome. I have a short sample on my channel (sorry for the shameless plug
@brolsonmusic
Жыл бұрын
I actually tried recording one side of the mimi (mono) into my daw, and running the other output (stereo) into another amp pedal ( Horizon Devices Apex Preamp) and recording that on another track to boost the volume. It sounded huge!
@kingmafw
Жыл бұрын
The Mimiq Doubler is one of the most exciting pedals ever. Saving recording time is one of the most efficient things a producer can do.
@KohleAudioKult
Жыл бұрын
I fully agree! Better spend your time on the creative stuff!
@A.J.99
Жыл бұрын
Man, the Mimiq pedal just adds some constant short delay to the wet channel. It doesn't make a real double tracking. I've got one and I know what it sounds like. It can be useful for live playing but not for studio work. Don't be fooled by the promo stuff.
@personalfreedom2700
Жыл бұрын
Do you think, from a mastering perspective, it’s important to always test the results in mono also?
@maxduncan4473
Жыл бұрын
Yes, always.
@personalfreedom2700
Жыл бұрын
@@maxduncan4473 That’s what I was thinking the entire video… if it doesn’t sound okay in mono also, then this whole experiment is basically pointless.
@maxduncan4473
Жыл бұрын
@@personalfreedom2700 Very much so. There's a million ways of creating 'pseudo stereo' or even doubling tracks, but making it mono-compatible is so often the deal-breaker.
@lilSchmoob
19 күн бұрын
at this point I've resigned to just commit to double-tracking things organically. Every time I've thought I found the solution to double-tracking with just one take and some trickery (using delays, detunes, haas effect, I even had the Mimiq pedal too) ... it sounds like ass in mono. Mono is so important because you don't get to decide what form your listeners will hear your music from - so if it's summed to mono (let's say in a mall or a store), you don't want horrible phasing issues to be present and ruin the track for people.
@personalfreedom2700
19 күн бұрын
@@lilSchmoob yeh same, i use a different guitar for double tracking also, sounds way fatter and organically removes phase issues
@carlasker9285
6 ай бұрын
Man, the final result is very convincing!
@tgunmusicchannel1973
Жыл бұрын
I use the mimiq as my signal splitter from the guitar, then one signal goes into an amp and the other into the headrush. 2 different amps varied by the mimiq. I also use the double track option on the Captor x.
@EversonBernardes
Жыл бұрын
An alternative to using two different amps, put an EQ pedal after the boost and change the EQ going into the preamp. Changing the frequency content _before_ the distortion has a massive impact on the character of the distortion itself. Maybe try -6dB at 1khz and +6dB at 2khz.
@EdwinvanKoppen
Жыл бұрын
I also do this, always use one track and use different amps and eq
@josuastangl7140
Жыл бұрын
6 is a lot, I tried 3-5dB and already liked that a lot!
@progrocker84
Жыл бұрын
@Sonicdrive Studios has a great video of this EQ trick.
@CountNetsrac
Жыл бұрын
They should have called the Tightness knob "punk"...the more you turn it up the more your virtual becomes becomes punk 😆 Nevertheless the pedal seems to be a valuable addition for home producers and maybe also for making your live sound bigger (especially for a three piece band). And great informative video as always Kristian
@shaihulud4515
Жыл бұрын
Pvre kvlt! If there's any justice amongst the stars, Kohle will leave his footprint with this technique. Kudos, monsieur :)
@KohleAudioKult
Жыл бұрын
🤘🖤
@GappyDanZ
6 ай бұрын
Just started the video so don’t know your techniques yet but I’m hoping it is the same or similar to what I do as if so then I have been doing it right all this time 😂 I record one track, copy and paste it, make the copied one unique, switch the polarity and slide it over so it starts maybe a few milliseconds after the original and then pan one left and one right
@BeautyInAPlasticBag
Жыл бұрын
Uh, I‘m excited to check this out later today.
@NexusLives
Жыл бұрын
Dammit. I've been doing this with the Mimiq for like 5 years. You've just given away my secret. lol. You did give me some ideas to do this trick even better. 🤘🤘 You also Reinforced that I'm not an idiot for tracking with a Mimiq.
@KohleAudioKult
Жыл бұрын
Win/Win 🤩
@NexusLives
Жыл бұрын
@@KohleAudioKult indubitably
@greevar
Жыл бұрын
I love that pedal! I've never stopped using it since I got it! It's fantastic! I run the output from the MIMIQ into a MOOER CAB X2. Also, you should try putting two different OD's, and EQ's through the MIMIQ. Follow that with different speakers for each track.
@kicsisziszi
Жыл бұрын
TC Electronic rarely disappoints
@tylerhb
Жыл бұрын
To those who complain about the phasing issues... there has been a firmware update some time ago which makes a lot of difference and improves the overall sound and mono compatibility a lot...
@KohleAudioKult
Жыл бұрын
Oh really? That might explain some of the comments that seemed rather odd to me. 👍🏻
@A.J.99
Жыл бұрын
The last firmware update for Mimiq pedal was released on 2019-11-26 and it didn't make much difference, LOL😂 TC Electronic tech team members know about the phase and panoramic issues produced by Mimiq pedal (at least from my e-mail conversation with them I had about a year ago) but they seem to don't give a sh*t about that.
@kostis6
9 ай бұрын
Super! I personally use the twin tracker on the torpedo captor x and works great! I use this technique when I want a big mono sound you know. I always do real double tracking anyway because it sounds more natural in my opinion. Many times I play differently between left and right guitars. I record alternative rock by the way. Cheers
@DycayBeats
Жыл бұрын
Sounds even wider than the actual doubling guitars omg. Good stuff!
@steve2.041
Жыл бұрын
hey kohle..55k subs..congrats..schön das der Channel so langsam abhebt..wurde auch Zeit
@maxduncan4473
Жыл бұрын
The way I've been doing it for about fifteen years is: 1) Record dry and duplicate it into two dry tracks. 2) Send track 'Dry A' into a distortion pedal and an amp and mic it up to re-amp it. 3) Send track Dry B into a different distortion pedal and a different amp - but both with similar tone settings to the first pass - and mic it up to re-amp it. If sufficient stereo separation is not achieved, then step 1.5): add, in series, a pitch shift of 1 semitone up AND another pitch shift of 1 semitone down (to correct the pitch overall) to track Dry B before sending it out to the distortion pedal - perhaps also add 10ms of delay if you need further separation. (Similar to what Eddie Van Halen used to do with his Eventide Harmonizer during the Van Hagar era.) This will create an awful chorus effect, but once it gets drenched in the distortion, you won't notice it. When summed to mono, the two re-amped tracks will not display any comb-filtering artefacts. Depending on how much distortion you use, you may not need different amps (even if the amp is providing some of the distortion). For very heavily-distorted sounds (such as Entombed, etc), you may not even need to do the pitch-shifting stuff - there will be enough 'chaos' already (which, as you say, is really the key principle in all this - trying to 'randomize' Track B with whatever tools are at hand). Edit: I do like the polarity trick, though. Even just for its own sake of having one 'wider' guitar let alone splitting into two.
@personalfreedom2700
Жыл бұрын
Have you tried the Captor X stereo out double tracker? It has an algorithm for double tracking that effectively does automatically what your workflow sounds like, with adjustable parameters. It also has an included program called “wall of sound” to test out the stereo double tracking… of course the final sound will all be a cab simulation and not real speakers, but can be a nice blending layer to throw in a track.
@maxduncan4473
Жыл бұрын
@@personalfreedom2700 If it's available for Reaper, I probably will give it a crack at some point. I tend to be a real-amps-with-mics guy (nothing again simulators, though), so it'd be a bonus if the signal chain allows for direct output pre-cab simulator.
@personalfreedom2700
Жыл бұрын
@@maxduncan4473 Yeh i think the stereo double tracker effect is all part of the final simulation … i just use it as stereo field addition to the blend of my analog tone
@the79D37
Жыл бұрын
You will laugh, I have been doing the same way with pedal and polarity since eh.. many years ago :) But the pedal was TC corona with some blueprinted settings, it is very versatile
@panikpas
Жыл бұрын
I use the Eventide Deco to split my signal in two with a reversed phase on one side and then I go into the Mimiq. That way, I can record or play live with two different preamp (Friedman pedal et Carvin VLD1) into a stereo power amp and 2 different cabs with greenback and JBL, and different mics (57 and 421). Sometimes I can ear phase shifting with the Mimiq but it does a good job. Even better with a very small pitch shift using the H9 at the input (up and down).
@metalheads-golf
Жыл бұрын
I use this pedal in live and recording. Being part of 1 guitarist band it's awesome. 🤘🏻😎🤘🏻
@devon-graves-studio-D
Жыл бұрын
Amazing result! Excellent if you have only one track to work with. It does beg the question whether or not it is faster than just playing it twice, what with all the experimentation. Gtreat Vid!
@ianinindy1165
Жыл бұрын
Cool, you play a Fernandes. I have 2. A Retro rocket and I think a old version Dragonfly from the 90's
@Errorformed_audio
Жыл бұрын
Awesome video, thank you for sharing this idea! I went to the store today after watching this and checked out the Keeley Electronics 30MS Double Tracker pedal (only thing close they had). It lets you do this (minus polarity trick) in real time while you do your original take, using a TRS output cable. Sounds equally good, very flexible options for dialing it in!
@KohleAudioKult
Жыл бұрын
I didn’t even know it existed. Thanks!
@nicholasmullins3693
Жыл бұрын
When you did the back to back at the end, I actually liked the fake double with the different cab better than the reference!
@KohleAudioKult
Жыл бұрын
You’re not the first to say this!
@MisuAlexandru1
Жыл бұрын
it sounds awesome! and it's also great for mixing live sessions in my opinion.Thank you so much! I can't personally try this because I don't have the gear, but it would be awesome to try this on a guitar solo (I've just listened to "i'm broken" by Pantera, that's why I'm saying this :P )
@Synster73
4 ай бұрын
This aeems like a good trick if you're in a tight spot. Still ideal to track L an R separately
@Masterlessmusic
Жыл бұрын
As a guitar player, this video, as helpful as it is, 16:18 makes me think... "you know, I could have just played it again for you". I guess what I'm saying is, it's clearly audible that this works,but at the beginning of the video it's implied that double tracking is a really long, difficult or tedious process. I feel like that shouldn't be the case. I suppose from an engineer's perspective,this sounds easier. As a guitar player who also records and mixes (granted not as proficiently as most of you I'm sure), I just feel like I'd get the double performed way quicker than the setup changes required to fake the double. Ultimately, you changed cabs, heads, installed a pedal, moved mics, searched for phasing issues and had to sit through the tracking capture and quite a few playbacks I'm sure to peg everything down. If you have a good performer they'll get both takes for you in two or three goes surely. Maybe a couple punches to tighten a part or two but otherwise, is it really a time saver?
@ionnera6235
Жыл бұрын
If often helps to think about the MiniMoog Model D, 1 oscillator = sound source = good, 2 oscillators = good yet with some phase, 3 oscillators? Excellent. Matt Pike may have discovered something similar with his 3x amp stack setup.
@12saltandvinegar
Жыл бұрын
He made that last video and I commented about using the tc electronic mimiq in a pinch and for scratch tracks and how well it works, I feel so validated 🤣 I only use it with emulation plug in and I’m super interested in getting a re amp box to mic my actual rig to see if I can get it that extra 10 percent, great video!!
@KohleAudioKult
Жыл бұрын
Thanks! The comments about Mimiq under the last video inspired me to check it out! 🤘
@jupjuck
4 ай бұрын
Using the mimic a mimic cannot put a double ahead of your original guitar, so if you set it to triple tracking and mute the dry the two doubles dance around your drys center point more like double tracking.
@amargogusano6206
Жыл бұрын
For "composing with beer" I used the jbFerox plugin with 70% tapespeed on the copied track and I could drink a second beer 😉(to the third beer i added flutter/wow fx).Of course I write as Nob ✌️Gruß
@sebrura
2 ай бұрын
I’m used to double tracking when recording. I got the Mimiq yesterday to check it out. Maybe it can save me some time and struggles? After a quick test, I’d say nah. It sounds ok, but there already is software doublers (Nembrini and STL) which sounds the same. And nothing replaces the sound of real double tracking. Live though, it will be very useful to get that wall of sound with only one guitarist.
@alanredversangel
Жыл бұрын
I used the mimiq a few times on stage, it has to be heard to be believed.
@nitraus666
Жыл бұрын
I mixed a live show (and then the recording of it) in which the guitar player was using a Mimiq to drive a second amp (so different amps, cabs and mics). During the show it was not perceptible, but in the recording the guitar sounds like there's a flanger on it, all the time. It impressed me, but not in a good way. Next time I'll check his settings, maybe it just needs a better set up.
@thieveryguitars6206
Жыл бұрын
I have a mimiq on my board and I use it in a two amp set up. Love that little pedal!
@TheOtherJohnBrowne
Жыл бұрын
I believe the TAD 25th Anniversary speakers are relabled Dave Mustaine V30s. They use the same.product code, have the same basket and were made at least three years before TADs 25th anniversary. I shot them out against a bunch of V30s....and they definitely are V30s
@briandeckard6566
Жыл бұрын
I use this Pedal live and turn my Gain down to About 4 and it Kills i love it
@pitaorj
Жыл бұрын
i´ve been using the mimiq direct to my interface, running the same amp in both channels BUT with different settings and different but close enough IRs. I´ve been doing that in the past 3 months and it is a great way to streamline pre production and composing new stuff. the final product is really close to the final product, but half the workload.
@Brandon-RZ
Жыл бұрын
Sounds damn good and convincing. This seems like it’ll make life a lot easier with recording not so experienced people in the studio. Getting like takes without editing it to all hell just doesn’t happen. Also for those who really want quad tracked guitars this seems like a better route to go. Also, people complaining about phase… literally one of the “best” mixed albums of all time the black album has phasey guitars all over it so….
@tusharjamwal
Жыл бұрын
" literally one of the “best” mixed albums of all time the black album has phasey guitars all over it so…." That doesn't invalidate their concern though. What if they hate exactly that sound from the best mixed black album?
@ronnymilianowicz5228
Жыл бұрын
So i tried to mix some of the last videos. :) I slaved my 6505+ into a Engl Artist Edition poweramp on 2 tracks with Mesa cabs. Then by using the flip phase and Mimic i created track 3-4 with a Marshall amp/cab. This is the first time i really liked blending amps from one di. Its like quad tracking but without loosing attack. Then i took di 1-2 again and re amped through a new amp/cab with Digitech D drop in octave to blend in slightly. So all in all 6 tracks and 4 amps from 2 di tacks. This was more of a test but the cool thing is that it works without the normal phaseproblems. I feel the Mimic works even better like this from 2 to 4 tracks since it seems to add up to like 20 ms delay.
@KohleAudioKult
Жыл бұрын
Sounds like you’re having fun! 🤘🖤
@capoman1
Жыл бұрын
It is very convincing, in the mix I cannot tell much difference. The original sounds a bit tighter.... That is quite a bit of gear though just to avoid an extra take... I record at home in the box, so I think ill remain double tracking.
@birdwellbirdwell
Жыл бұрын
This is so dope you got one! I’m so glad you tried one out when I suggested it on the phase video. I love mine live, guess it does work for recording as well.
@KohleAudioKult
Жыл бұрын
I forgot to mention I was actually inspired by the comments. So thanks for that!
@greevar
Жыл бұрын
@@KohleAudioKult I've mentioned this pedal as well. I'm glad you heard us!
@TheGarageRecordingSC
Жыл бұрын
That was absolutely amazing!! I wonder if we use amp Sims, with different cabinets, and maybe even different styles of overdrive Sims, we could maybe get a similar result?!! 🤔🤔🤔
@ronnielobosmith4870
Жыл бұрын
Also using the a b pedal scooping and boosting your mids
@andreaseveso
Жыл бұрын
I will always double track guitars but that's an amazing solution to avoid the quad tracking time
@KohleAudioKult
Жыл бұрын
Indeed! Quad tracking is a PITA. This setup should easily replace it.
@MK-oz2lf
Жыл бұрын
Yeah it’s pretty close. The copied side has less low end and the real take sounds more pronounced still but this is a great mix idea for a single guitar band when playing live. Petrucci uses the Mimiq with two heads and speakers live
@rievezahl
11 ай бұрын
This makes me want to do a 999-take-guitars song even more than it ever did since watching a Mongol Moorin Khuur mass performance. Unbelievably amazing techniques anyway!
@thepilgrimplays
Жыл бұрын
Yeah man, that sounds convincing, but you're basically doing all the stuff that many would normally do on real double tracked guitars (except for the Mimiq and the polarity): different pedals, different amps, different settings, different mics and mic placement. And I could even add the Mimiq pedal on just one side. You could also add a tiny little bit of flanger on one side and chorus on the other, or one dry and the other wet, etc. Also using DIFFERENT GUITARS, selecting DIFFERENT PICKUPS on the same or different guitars, and playing the chords in DIFFERENT POSITIONS. Also playing the same riff on a DISTORTED BASS with the pick on the upper positions, specially the D string. And anyway that consumes a lot of time when setting those things up every time, way more time than the double tracking performance on top of it. So once you're setting all that stuff, it's worth it to double track. I'm speaking from personal experience. And the real double tracking will always feel like the real thing, and it can also cause some happy accidents, improvised harmonizing variations on just one note, etc. that will sound good. And since the recording of a specific song is a once in a lifetime that will sound like that for ever once it's released and there's no turning back, you would wanna try the best for the best final result.
@VitalyGanja
Жыл бұрын
For others who don't have a Mimiq pedal there is a tiny little free plugin by Kilohearts called "Haas". Name says the effect it represents.
@KohleAudioKult
Жыл бұрын
I think that’s “only” a microdelay plugin if I’m not mistaken
@VitalyGanja
Жыл бұрын
@@KohleAudioKult it has delay range from 0.1 (or something) to 100 ms. And something around 20ms does its trick very well.
@brozio77
Жыл бұрын
i often use some tricks with the mono to stereo plug in on cubase and i obtain a convincing result. but this pedal and tricks are absolutely a step forward to perfection and is very very usable :)
@dustrider9306
Жыл бұрын
I had this idea of a pedal that does exactly what the mimic does 5 years ago. Seems like I was on the right track. glad that it's out. :)
@shoseinen
Жыл бұрын
Great video! I was thinking on gettin a TC Mimiq doubler, or a Boss Metalizer. In the meantime, i've achieved a good double tracking sound using a Line6 POD HD Desktop, very good results, but the thing is i depend on using the parallel preamp modeler and the cab sims for now, maybe if i use 2 separate IR loader it will get a little bit better. I think it's possible use only the effects and getting good results, i'm using a Pitch vibrato in one of the amps. On the past, I've done this with the POD X3 too, it's possible, but takes you on a path to frustration for various reasons.
@3ngi_n33r
Жыл бұрын
Very cool! To add-revoice apt works pretty good, if you have it. My favorite thing to do is set up loop points and play the part till I’ve nailed it at least 2x, and do the protools magic from there. I’ll have to check out the polarity thing. 👍
Пікірлер: 523