That came out super clean. I should probably clean some of my AR’s. Maybe next year:)
@TinManReloading
Жыл бұрын
Don't do it. Its a trap 🤣 Thanks, Jeff
@unclejohn1053
Жыл бұрын
Looks like a Jefferson Airplane video to me. Dude.
@TinManReloading
Жыл бұрын
I think I'm too young to know that one 🤣
@WilliamCChapin
Жыл бұрын
Hey...that was a Slick one! 😀
@joeyoutdoors
10 ай бұрын
I use the same method. To answer your question on the gas port -- Use compressed air in the gas tube and blow the crud back into the barrel run some of the wash on some pads to final clean,
@TinManReloading
6 ай бұрын
That’s a good idea. Good call! Thanks for watching 👍🏻
@oddballschtuff
Жыл бұрын
Interesting to see so much detail. I don’t know if I dare look in my barrels. That stuff really works well
@TinManReloading
Жыл бұрын
Its better to be blissfully unaware. I did 3 barrels yesterday and I'm over it 🤣
@oddballschtuff
Жыл бұрын
@@TinManReloading I bet!!!
@jamespollard1670
Жыл бұрын
I've always used Hoppes #9 . I've never even tried the other newer stuff .
@TinManReloading
Жыл бұрын
That will do a good job as well. I'm just a sucker for marketing I guess 🤣
@jh5869
9 ай бұрын
Yes Sir, it's very interesting to me. I need to get myself a bore camera.
@TinManReloading
6 ай бұрын
It’ll drive you crazy but it’s good to know what’s going on in your bore! Thanks, Jamie 👍🏻
@mrsmel269
Жыл бұрын
nice work brother !!!!
@TinManReloading
Жыл бұрын
Thanks, Mrsmel! Hope you're doing well!
@sixshootertexan
Жыл бұрын
Don't look at the mirror. Look where the mirror is touching the rifling and it looks normal. The light reflection is creating an opitical illusion.
@TinManReloading
Жыл бұрын
Good call! I didnt even notice that. Guess it just streaked differently through those grooves.
@StuninRub
3 ай бұрын
It's not an optical illusion. You look at a good cut barrel and it won't look like that.
@unclejim2330
Жыл бұрын
That is weird , nice and clean though. 👍
@TinManReloading
Жыл бұрын
I always get the weird crap 🤣
@bubbatriclopsballistics
Жыл бұрын
For what you did for CW you’ve earned a sub ty CW is good people!
@TinManReloading
Жыл бұрын
Thanks, Bubba! Subbed you back!
@CrankyCleatus
Жыл бұрын
Bore camera works great…don’t get your brush stuck 😂👍
@TinManReloading
Жыл бұрын
I dont plan on getting anything stuck in my barrel. Even bullets 🤣
@cw2a
Жыл бұрын
🤘🏼🤟🏽💪🏼👍🏼♥️😜
@TinManReloading
Жыл бұрын
👍👍👍
@blueeyechuck
9 ай бұрын
Hello. What I think you're seeing with the "extra grooves" is the result of a slight difference in the height of the lands or the depth of the grooves depending on how you want to see it. The bullet is engraved less on the short lands and the side of the bullet is rubbing the bottom of the groove. If you follow one groove from end to end you should see the same thing be it an extra groove or not...as long as it cleans up and shoots good probably nothing to be concerned with. I just got my ThorroClean. I will see how it does..
@TinManReloading
6 ай бұрын
Yes, this barrel shoots great. I’ll have to look next time I have my bore scope out and follow the grooves. Good luck with the thorro clean!
@blueeyechuck
6 ай бұрын
@@TinManReloading Hello again, looks like you were able to scrub out the extra grooves. A good test would be to fire a couple of rounds and see if the "extra groove" starts to develop. It's a little bit of fiddling around but try to "clock" your bore scope to see if it is the same grove each time. My rifles shoot pretty good but after cleaning they seemed to tighten up a bit. My Vudoo was spot on with zero POI shift which is surprising to me.. Good stuff !
@unclejim2330
Жыл бұрын
Shoot brake cleaner through the gas tube after using a long pipe cleaner.
@TinManReloading
Жыл бұрын
Thats one I hadn't thought of. But its way out in the she-shed 🤣
@brokeloader
Жыл бұрын
That came out nice.
@TinManReloading
Жыл бұрын
Thanks, brokeloader. Now I gotta do my other 3 rifles 🤣
@tims6212
Жыл бұрын
Nice! That's pretty cool. What bore cam you using? It shows quite a bit. Have you tried chamber maids and a copper /carbine removal tool? I can't remember where I bought the one I had at work. I need to look it up again. But I really need to get a good scope.
@TinManReloading
Жыл бұрын
Thanks, Tim! Its the Teslong Rigid Rifle Borescope off of Amazon. Plugs right into a laptop or a phone. I havent tried anything other than Hoppes and this stuff. I'm not the most meticulous gun cleaner until I bought this damn borescope 🤣
@tims6212
Жыл бұрын
@@TinManReloading Sweet thanks. I'm in my birth month maybe I can check Midway USA for a discount. Thank you again. (Added later) look up the Kley Zion for their carbon scrapper tool and Beileshi chamber pads. They are both on Amazon and they are what I used at work to clean the chambers. Both were cheap and worked great. The carbon tool is a multi tool. Not only for chambers it works on the bolt and other parts. Great tool. ✌️ and good cleaning.
@viejo2a
Жыл бұрын
Nice! A bore scope tells us all kinds of stuff that we might not really want to see, LOL! 🤛🏻🔫🇺🇸
@WilliamCChapin
Жыл бұрын
That's why they are banned in California!
@TinManReloading
Жыл бұрын
I've seen too much already 🤣
@WilliamCChapin
Жыл бұрын
@@TinManReloading 🤭
@idahorodgersusmc
Жыл бұрын
My life before owning a bore cam : ..."you don't know, what you don't know" My life after purchasing a bore cam:..."I can't sleep now that I know that"....👍
@jamespollard1670
Жыл бұрын
That reminds me of that movie where he says , " You can't handle the truth ! " lol
@TinManReloading
Жыл бұрын
Ignorance is bliss, isn't it? But now I know how much I sucked at cleaning barrels 🤣
@ggwoutdoors2a
Жыл бұрын
IMHO it looks like those are wear marks in the grooves between the lands from the projectile as it's leaving down the barrel. It's in the beginning of the rifling and then disappears soon after. Could be from the pressure exerted on the base and it obturates in that area then resumes original shape? Just my guess. Good stuff TinMan
@TinManReloading
Жыл бұрын
Yeah, I agree. Probably just weird wear marks. Sixshootertexan had a good point. Don't look in the mirror, look directly at the rifling. It looks normal then. Thanks, GGW!
@BOHEMIANHUNTINGCLUB
Жыл бұрын
Cool deal
@mckwilly
Жыл бұрын
Mature audiences only
@ocean374
Жыл бұрын
That is cool the gas port concerns me also
@TinManReloading
Жыл бұрын
Eh. A couple of magazines through and it'll clean itself out 🤣👍
@Marcus2750-u1t
Жыл бұрын
Very clean, how many rounds you have on it?
@TinManReloading
Жыл бұрын
I'm not sure. I built this in 2018 or 2019, so I'm guessing 500 or so?
@Marcus2750-u1t
Жыл бұрын
@@TinManReloading ok gotcha was just curious…. Is it a tack driver?
@TinManReloading
Жыл бұрын
@@Marcus2750-u1t When I do my part with the right handload, this gun has shot 0.33 MOA at 200 yards, 5 shots. I did a video about fire formed brass a while back and got that group on video. I couldn't believe it.
@TinManReloading
Жыл бұрын
@@Marcus2750-u1t oh, nevermind. I thought this was my TC Compass. This AR has done a 0.6" group at 100 yards at its best.
@Marcus2750-u1t
Жыл бұрын
@@TinManReloading I handload as well and thats freakn outstanding! I ask because I have one bear creek barrel I did a build with and with my hand loads Its shot under 1/2 moa but just barely and I gave very little money for it! It takes my custom barrels like my Lothar Walther to beat it. I dunno if I just got lucky or a barrel from when the button was new who knows. Others I know with bear creek shot ok but not that well and call bs till we go to range and I put a few groups up! Anyways it looks great after the cleaning and thanks for sharing your experience!
@tommeboy3334
Жыл бұрын
Get the barrel wet again. Then take a rubber tipped air gun and blow the gas tube inside the receiver if it bothers you. I like to use compressed air to clean in the receiver and lower to blow everything out. Otherwise 60K psi will make short work of it.
@TinManReloading
Жыл бұрын
Ill have to try that. Might even have some computer air duster that might work.
@joeyoutdoors
10 ай бұрын
Sorry, I left the same comment. did not read that someone already suggested. The air method through the gas port tube into the barrel works very well. Just remember to run a patch one last time... @@TinManReloading
@SPLINTERINTHEMINDSEYE
4 ай бұрын
Try a 6mm bore brush to remove the carbon ring.
@TinManReloading
3 ай бұрын
Great tip! I have a 223 chamber brush. Not sure if that’s any better or worse than a 6MM. Bolt Action Reloading has shared a great method on carbon ring removal. I used his method later on with some Hoppes No 9 instead of the Boretech stuff and it still worked great.
@Marcus2750-u1t
Жыл бұрын
Its chatter marks from the button …..
@HobbiesHobo
Жыл бұрын
🙂
@Rico11b
6 ай бұрын
The tool marks left by the hammer forging process is incredibly bad. It's gotta be just ripping the skin off the bullet as it passes through the barrel.
@TinManReloading
6 ай бұрын
But, it still shoots great! That’s the weird part. I’ve shot plenty of 0.3 MOA groups out of this barrel. I don’t understand it but it works.
Пікірлер: 67