Right on time when the campaign goes live. Kudos to ThorZone for sending a review sample to the authority of ITX case reviews.
@amie704
4 жыл бұрын
@Hose2wAcKiEr Yeah not a fan of the AIO with the PSU cable right on it.
@vido989
4 жыл бұрын
@Hose2wAcKiEr why so ? considering to buy that one or loque S1 ? Pros/cons ?
@Mac_Diddy
4 жыл бұрын
The removable frame concept is a very interesting idea.
@zhendiz5237
4 жыл бұрын
like Razer's eGPU core design oof
@snekku
4 жыл бұрын
The new Mac Pro does this as well and it's cool af.
@Mac_Diddy
4 жыл бұрын
@@snekku I'm not a huge apple fan but yeah the new cheesegrater mac pro is pretty dang cool.
@KurtKloetentreter
4 жыл бұрын
If major case manufacturers did this they could sell frames with corresponding shells in different designs, would make changing the look of your rig incredibly simple
@ijpmac
4 жыл бұрын
First seen in the PowerMac G4 Cube, (circa 2000!)
@SpardaDVLKing3
4 жыл бұрын
Don’t forget the shipping fees. It costs like 100 bucks where I’m from, 400 is pretty steep.
@WinterCharmVT
4 жыл бұрын
Weight adds shipping cost, unfortunately. :/
@derlanger1939
4 жыл бұрын
Even to EU, shipping fees are more than 100€! Discouraged me tbh
@GLAXxan
4 жыл бұрын
Don't forget Swedish VAT for EU :/ still backed tho :D
@THORZONE
4 жыл бұрын
That's including all taxes (like VAT if you're in EU or Sales Tax if you live in the US, etc.
@dKenGuru
4 жыл бұрын
@@THORZONE What tax in Russia? If U ship outside Swedish or EU, client must don't pay any taxes. No point why u include taxes in shipping cost.
@D6isD6
4 жыл бұрын
Seems like increasing each dimension by like 5-10mm would help a lot.
@OverdriveTech
4 жыл бұрын
The more I watch your videos the more I want an SFF PC
@odinsplaygrounds
4 жыл бұрын
TIK I went ahead and got it haha. Haven’t built a PC in 15 years now. SFF has made me interested about it again. Just hope companies continue to support and improve, and continue making even smaller designs. Love the thought of highly modular - yet tiny computers. And this channel is great for covering / focusing so much on it. So tired of all the P.C. tech channels focusing on building outrageously huge and inconvenient computers with terrible “gamer” design with RGB lighting. Wish there were more minimal and design focused P.C. channels.
@BatteryAz1z
4 жыл бұрын
@@odinsplaygrounds imo the joy of doing builds is optimization within a specific envelope. There is no challenge to building the 'best of the best' in a large ATX enclosure.
@odinsplaygrounds
4 жыл бұрын
@@BatteryAz1z Completely agree.
@mikenogo
4 жыл бұрын
@@BatteryAz1zPeople are still buying large enclosures? Oh THOSE people.
@THORZONE
4 жыл бұрын
Odin's Playground Legend!
@KrispysRC
4 жыл бұрын
Cant say im that impressed for the price. Ill stick with my Dan A4
@alb9229
4 жыл бұрын
Yeah if you already have a Dan A4 Mjolnir doesn't offer much more other than aesthetics ( and bigger volume ) , Ghost S1 is a much more appealing case imo .
@KrispysRC
4 жыл бұрын
@@alb9229 I agree. I did like the Ghost and owned two of them. But I still wanted smaller so went back to the Dan A4 and came accross a user on reddit who designed an ultimate cooling guide for the A4 and i have zro regrets. Think I found my end game.
@dennismarzan5770
4 жыл бұрын
Both cases you mentioned are better than this overhyped space inefficient mjolnir
@GLAXxan
4 жыл бұрын
All these cases are amazing. For me, the main appeal of mjolnir is the design, for which I am willing to pay a bit extra
@odinsplaygrounds
4 жыл бұрын
Cookies Krisp too bad there was nowhere selling that case in my country. Ghost S1 was the only of premium / quality SSF cases I could find (in Norway).
@LasseTM1
4 жыл бұрын
I can’t believe that Optimum Tech does not have more subscribers. All videos are so well done and helpful so you deserve a lot more subscribers. Thumbs up for you!
@optimumtech
4 жыл бұрын
Thanks!
@Bajicoy
4 жыл бұрын
I’m building my own enthusiast case for my pc and seeing the high price for these premade cases and the cost of my own case is pretty encouraging
@mrmike918
4 жыл бұрын
Same
@funknugget6334
4 жыл бұрын
Sexiest SFF case at a not-so sexy price…
@lawrencesayshi
3 жыл бұрын
I think the eventual thing with this case is that you'll use it forever. Never buy another case again... So with two builds, it'll be $200, 3 builds, about 133, 4 builds, 100, etc. Not really the best analogy, but
@CH-ol5rh
4 жыл бұрын
This is easily the best looking case I've ever seen.
@iolite2312
4 жыл бұрын
Sick of all these kickstarters, when did Thermal Take, Fractal and Silver Stone stop caring about this form factor? Sick of how expensive these little 10L cases are.
@pilerks1
4 жыл бұрын
Tbh velkase isnt that expensive. I get 150$ is more than a mainstream case, but its about 50$ cheaper than other itx cases
@ccricers
4 жыл бұрын
I think even Silverstone has realized that the SFF market is now cornered by the boutiques and their high prices, so they don't see a big need to release new cases and just stick with their current ones.
@NolzXD
4 жыл бұрын
People like you are a very small market, big companies aren't going to make a reasonably priced case specifically for the 0.5% of people that want a cheap 10L case because it simply isn't profitable.
@achannelhasnoname5182
4 жыл бұрын
I really don't like how flexible the inner frame is..
@andymofoincross
4 жыл бұрын
I also don't like the metallic scraping noise the core makes as it's pulled in/out of the shell
@jannclaudebinoya
4 жыл бұрын
Ikr. I always want to flex the inner frame while gaming. *said no one ever*
@achannelhasnoname5182
4 жыл бұрын
@@jannclaudebinoya oh come on, these cases are always pretty damn expensive, that's why I expect some quality.
@wifal6874
4 жыл бұрын
In all seriousness, it doesn't need to be.
@pilerks1
4 жыл бұрын
Id rather have a velka 5
@m4nc1n1
2 жыл бұрын
I love they listened and the panels are magnetic now.
@linus2490
4 жыл бұрын
That thing looks absolutely amazing, haven't seen the review yet, but I want it already
@darkseraphim42
4 жыл бұрын
man just the first shot gave me chills.
@THORZONE
4 жыл бұрын
Dane Tadsen It still gives me chills!
@brandoneich2412
4 жыл бұрын
Been waiting too long for this review! Very promising!! :D
@alex-grover
4 жыл бұрын
Dude. I have never built a PC and probably won’t be at a place in life where I’ll be able to do so for a couple years. But I still love watching your videos because they are just so high quality. Keep it up!
@Exis4Pro
4 жыл бұрын
So glad they sent out a case to you for review!
@Killeemegee
4 жыл бұрын
very nice case/build. Use an icing spatula to prevent that riser cable from being snagged as you slot it in.
@jw_25
4 жыл бұрын
This case looks amazing but the $400.00 price tag for the RGB version is just too premium for my wallet.
@_Randwulf
4 жыл бұрын
This case provides a lot of interesting simplicity features. It will be interesting to revisit this case when issues are resolved and early adopters have purchased enough for them to lower the prices... 👍😎
@allansh828
4 жыл бұрын
my wishlist for my next SFF case: 1. magnesim alloy body, sub 1.5kg weight for the empty case. 2. 120mm + 240mm radiator support 3. three PCIe slots. 4. built-in WiFi/BT antenna on the case 5. front panel as a waterway board 6. drain hole on the top hat What else would make it perfect for you?
@zoomzabba452
4 жыл бұрын
Nylon core and Type 2 anodized aluminum shell or Carbon fibre everything for thin panels so I can mount noise killing foam rubber. I'll probably start carbon fiber cloning a Sliger when I get it.
@allansh828
4 жыл бұрын
@@zoomzabba452 you plan to process carbon fiber at home? How exactly do you do it?
@zoomzabba452
4 жыл бұрын
@@allansh828 Probably just bond pre-made panels. Alternatively, I could make a mould, use pre-preg material, and then put into a vacuum container. My stepdad has a good size vacuum pump and chamber he uses for removing the air from silicone rubber moulds.
@allansh828
4 жыл бұрын
@@zoomzabba452 Do you consider using metal foam for side panels? It lets air pass through and dampens noise.
@jessehattingh8556
4 жыл бұрын
@THOR ZONE if you reply to this it'll be greatly appreciated as I'm considering buying either this, or the ghost s1. This might clear up any other peoples concerns. 1. The inner frame flexibility, is it a deisgn flaw, or meant to be like that? If it is meant to be that, and since it is a steep premium price, can you perhaps improve the flex? 2. The rail idea is a good idea. I personally don't want to struggle to take my inner case in and out. The Ghost s1 is good because of its flexibility, and accessibility. Are you going to change anything in this regard? 3. I am aware that materials do cost a bit, and you have a lot of expenses to cover hence the kickstarter, but can I please hear the justification in making it more expensive than the ghost s1? I'm sure I don't need to explain basic competition to you, putting the Mjolnir closer to ghost s1 will really benefit you. Please may I hear your side to this? 4. Not really a question, more a thanks for bringing more options to the table. However, if anyone else has questions feel free to comment in the replies section to make it easier for them to see.
@bobsagget823
4 жыл бұрын
cry moron
@ottogeupel5924
4 жыл бұрын
Damn man your upgrades have been nuts recently. Love it!
@soulboystinky
4 жыл бұрын
I almost missed your channel with this new profile pic change, i love it!
@NewUser-xw1gn
3 жыл бұрын
Thor zone, technicaly this case is awome build and engenired but lack some details, instead of tape pls use a spring loaded ball slider! Decrease the wall thikness and increas the Vent perforations and over all case voule upto 12-14lt, most probably the thermal result will become much better
@natorious314
4 жыл бұрын
What an exceptionally well built looking case. Fucking beautiful.
@THORZONE
4 жыл бұрын
N G thanks man!
@Vaxovillion
4 жыл бұрын
Love the overall idea of this case, the cable for the pcie riser rubbing against outer frame when sliding in and out is a deal breaker for me. You can see the damage on the cable already.
@PaulSebastianM
4 жыл бұрын
That riser cable is pretty much dead.
@jeffreytan2948
4 жыл бұрын
Yup, the way it looked frayed after being inserted into the case, I'm surprised it still worked.
@richardfarmer6570
4 жыл бұрын
Thanks for the objective review, I have been waiting for this one. Looks like thermals are decent at least but might be a good idea to wait for a revision.
@icebread9335
4 жыл бұрын
The first 30 seconds are showing why this case is superior
@SinnerJ
4 жыл бұрын
Magnetic solution has been implemented thankfully.
@khemist00
4 жыл бұрын
Got my backing in for RGB and both panel sets, can't wait.
@GLAXxan
4 жыл бұрын
Same :D
@darkwing5458
4 жыл бұрын
Blower style card for that build is a must.
@KingMai
4 жыл бұрын
Thats a pretty interesting case, might have to buy one when I build my pc
@rafaelreisr
4 жыл бұрын
The review we’ve all been waiting for!!!!
@stonetusk1
4 жыл бұрын
11:12 really solid offering i agree
@morbue7575
4 жыл бұрын
most ppl i know want to use the glass panels .. any tests for that ?
@chasenthehype
4 жыл бұрын
Yup, as soon as this drops I'm in. I've actually just wanted Razer to release their eGPU Core enclosre as a stand-alone case, but I highly doubt that;ll happen. The entire slide-in mechanism is just brilliant - and is what actually sold me on the Core X (vs other eGPU enclosures). Such a brilliant way to do it really - build it outside the shell, test it, then slide the shell over when it's posting!
@panjiwicesa8698
4 жыл бұрын
Always inspiring me for any pc build, thanks man !
@optimumtech
4 жыл бұрын
Thanks for watching!
@alb9229
4 жыл бұрын
Not bad the design is cool and overall built quality seems top notch ( despite the inner frame being a bit too flexible ) but this being said cooling compatibility and temps are not the best ( especially if one goes for a pure air cooling setup ) . Personally i dig more Ghost S1 aesthetics / dimensions / compatibility ! On another note please Ali could you take a look at the new 58mm cooler from Scythe ?
@MaximumFrames
4 жыл бұрын
Nice ! First KZitemr Rewiev from Thorzone Mjolnir, Good Job !
@ronaldsanpedro1976
4 жыл бұрын
This feels like a bigger and beefier dan a4. The layout is the same minus the core removal and the bigger dimension to accomodate 120mm aio.
@SERGE_Tech
4 жыл бұрын
awesome intro logo
@Pillokun
4 жыл бұрын
Like the chassis, at first I thought the outer shell was milled out from one single piece but saw the gaps. Still pretty cool.
@GLAXxan
4 жыл бұрын
I was following them on SFF Forum and this was their plan from the beginning. However, milling from a single piece would be many times more expensive and casting did not prove good enough quality.
@evilcab
4 жыл бұрын
wait, dont this case suppose to be an unibody case? why is there lines? or am i thinking about a different case...
@riba2233
4 жыл бұрын
They changed that, read more on the sff forum
@evilcab
4 жыл бұрын
@@riba2233 ah, ok. did not know that. i only remembered being super interested years ago. i hope this launch will be smoother than other new case brand(looking at you loque).
@Athasin
4 жыл бұрын
zeta555 At this point, can we still call Louqe new. It’s going on three years now.
@Philson
4 жыл бұрын
OMG. The slide out concept makes so much sense!
@PhreakDarkSoul
4 жыл бұрын
Anyone else hearing the screw crying "No, please use a wider screw driiiiiiiiiiii..."? ;)
@THORZONE
4 жыл бұрын
Haha lol do you mean the lock/open knob on the back of the case?
@PhreakDarkSoul
4 жыл бұрын
@@THORZONE Right. 😉
@ToWi1989
4 жыл бұрын
Should even have a plastic tool. Its so easy to damage the anodized finish
@TheRitualChannel
4 жыл бұрын
dope case! As always great review with top notch editing and videography.
@WarriorsPhoto
4 жыл бұрын
This is a beautiful case. Those thermals are like a modern Mac PC. They look great and run hot. Sad reality of modern computing.
@tahmidimlak2892
4 жыл бұрын
Would you consider reviewing the InWin A1 plus?
@JustinBone
4 жыл бұрын
I've been looking forward to this case for a while now. There's definitely a few drawbacks, but, they're not major ones for me. I don't know if an AIO/liquid cooler is really ideal for this case as they seem to be starved of air flow, but, proper components (lower TDP CPU's like Intel's i9-9900, 65W TDP) it'd probably get a bit better thermals as well.
@ayuchanayuko
4 жыл бұрын
Still sticking to my SG05 -- at just 0.8L more I have 2 desktop harddrives and one SATA SSD, a 120mm AIO, an RX570 with extra space for longer cardd, and can fit in my backpack.
@bigfisher42
4 жыл бұрын
how about a micro-ATX 10L case? There's not often a mini-ITX board compatible with the latest chipset. I'd like to build myself a new PC but as small as possible and as powerful as possible (threadripper/cascade lake-X processor) and no mini-ITX board support those processors. I wouldn't mind having one of the PCI-E slots unused (or used with a mini bracket) and you could still sleeve the GPU to the other side with the bottom PCI-E slot. Is it such an absurd thing to ask?
@riba2233
4 жыл бұрын
Search for sfftime p-atx on the smallformfactor forum.
@bigfisher42
4 жыл бұрын
@@riba2233 Thanks, glad to see there are prototypes. Too bad I don't like the design of this one, and since it's compatible with standard ATX, it's too tall for my taste. Starting to think I'm gonna model my case myself
@zyxyuv1650
4 жыл бұрын
@@riba2233 SFFTime P-ATX is a bad design, and can only use 1 PCIe card. With a real design for 9L you get mATX with 4 usable full height slots and no riser.
@allansh828
4 жыл бұрын
How heavy is the finished build? Can I air travel with it?
@hitmanslayer3003
4 жыл бұрын
Hose2wAcKiEr thanks, that’s a hard pass for me then
@supportwaifu
4 жыл бұрын
I just travelled from US to Japan and I carried my Ghost in a duffle bag no problem, it's more about the size than the weight
@allansh828
4 жыл бұрын
@@supportwaifu many air companies won't let you take over 10kg on board. Do they actually measure the weight of your duffle bag?
@peter.s.3207
4 жыл бұрын
@@allansh828 I've never once had my carry-on baggage weighed at an airport
@supportwaifu
4 жыл бұрын
@@allansh828 In my experience they don't enforce the weight so much as the size, if it can fit underneath the seat then it's good. A my fully built Ghost isn't over that, it's like more like 7-8kg. (Edit: In an Air cooled configuration so no top hats)
@DeilGrist
4 жыл бұрын
Like the design overall except for pinching/rubbing the riser cable. Definitely needs a fix. I would also recommend you get some fan grills to give you better fan flexibility in tight cases like this.
@AnonymousMachine
3 жыл бұрын
Noctua have some slims fans that could help to get more space for those cases.
@Mad5cout
4 жыл бұрын
Try the radiator fan set as exhaust in pull config. Bet the temps are better.
@kissofthecobra3761
2 жыл бұрын
Cougar has a small sff case for about 100 that can accomplish much of the same thing.
@chrismansour5191
4 жыл бұрын
Damn why can’t sff cases be as readily available as normal ATX cases 😔
@D-One
4 жыл бұрын
Interesting... I feel like wit this sort of case a good idea would be to trim the power supply cables, cut a piece off, solder done. Since space is at a premium. Would rekt the nice-looking sleeved cables but who cares if no one will see them...
@gc4550
3 жыл бұрын
Has this case even launched yet?
@madwedge1
4 жыл бұрын
Shame they failed their first Kickstarter target a few months back. Great looking case, but stupidly expensive for what it is!
@wertin200
4 жыл бұрын
How do you so consistanly make such high quality videos?
@kimhansen3888
4 жыл бұрын
why not try and use that slim fan on the aio ? more room left. would be fun to see the temps tho.
@LimitGTX
4 жыл бұрын
Great tour of the case but could you show the Mjolnir in the vertical orientation when in use. Also would be cool if u still have the Velka 5 to see the size difference when standing vertical =]
@SCOOPSLEGEND
4 жыл бұрын
Does it come with active regeneration of it's shields?
@THORZONE
4 жыл бұрын
No, these prototype shields are not worthy to regenerate. We're currently eyeing much tougher tapes (they are also black, much more appealing). Another option is to use plastic inserts on the edges of the core and skip tape all together (in talks with factories to figure out the costs on these).
@SCOOPSLEGEND
4 жыл бұрын
Did Dr. Halsey approve this project? I’m gonna need to see your UNSC credentials.
@Ghettochild.2600
4 жыл бұрын
Front power button and brushed aluminum and gtg
@iShredStreets
2 жыл бұрын
I guess this will have to do since the NCASE M1 got discontinued.
@ICEMANZIDANE
4 жыл бұрын
I dont get it, seriously ! All these slim "slick" cases dont have a front mesh. I mean, most of the cases are black and a black front mesh wouldnt even destroy the look of the case, in my opinion it would look even better. I have seen people who mod their cases and build a front mesh, these manufacturers should do that in the newer models. The Thorzone looks nice aswell but yeah, airflow is missing here too.
@vanoli89
4 жыл бұрын
You should test the 120mm flipped as exhaust instead of intake.
@XChanges2
4 жыл бұрын
Hi Ali, checking out your amazing channel regularly! Could you point me to the smallest case, that can run a stock 8700k without noise or heat issues! Thanks so much!
@captainawvius
4 жыл бұрын
Thanks for the awesome videos. Also when can we see the next video with full water config? Mjolnir jus launched and we are all expecting our new tank cases by Sept 2020😎
@warmachine5835
4 жыл бұрын
The damage on that riser cable, the clearance between the radiator fan and the cables, and the limitations on the 240mm radiator make me very skeptical. I'm wondering if you could get away with more using EKWB's slim radiators and Noctua's 15mm line of fans.
@Raditram
4 жыл бұрын
Man I wish big manufacturers would make cases like these, cos the problem with these companies are, The premium Price + Tax + Shipping would make these cases way too expensive, even for someone like me who lives in Asia, we're stuck with large itx cases from mainstream brands or crappy cheap plastic itx cases. I mean people are selling used Ncase M1 for $300-$400 here. Which is ridiculous.
@Maxsation2481
4 жыл бұрын
I love it, but at that price tag I can't justify buying this. I get it's a niche market and more of an enthusiast market at that, but for almost $450 with shipping I'll pick up a Ghost S1 or Sentry 2.0 once those are back to accepting orders. Thanks for the review Optimum!
@cottontails
4 жыл бұрын
Your easily becoming one of my favorite tech KZitemrs!
@tadi7847
4 жыл бұрын
Not impressed by the case, but the timely review is very much appreciated.
@XenonG
4 жыл бұрын
Could use an external water cooling solution, should have enough space for 4 water pipes. Two in, two out. Though then, that kind of misses the point of getting such a case.
@GLAXxan
4 жыл бұрын
But what about the glass panel temps!? :O please, if possible
@ripsimps
4 жыл бұрын
I might be out of line for saying this but I would buy this case just for the frame and run a open air case but if on the go would definitely throw the core into the shell
@normaln372
4 жыл бұрын
I just wait for this video. Nice!
@nikkosol5631
4 жыл бұрын
It would be a good idea to make it possible to use a 240 mm radiator with fan. I dont see that it will make a huge difference in the overall size of the case.
@bkohnen
4 жыл бұрын
Liquid cooling seems odd. Why not simply use a low profile CPU cooler set to exhaust? This would blow the hot air right out through the vent holes on the side.
@storm91229
4 жыл бұрын
They could just make this a great case by just making it a real 10L case or just above 10L case and a some studs to screw or magnetically attach to the bottom part of the case in order to lift it abit to provide a little headroom to allow a more efficient airflow. I'm in LOVE though😉😉😉
@fehergergely
4 жыл бұрын
Impressive quality video again... and again... and again... and again... well done again! and again... and again... and again... :)
@X3MCTZN
4 жыл бұрын
A new challenger approaching!!!
@ChowHound1337
4 жыл бұрын
You need to do testing with the Shift Air on there as well
@VoidlessOfSpace
2 жыл бұрын
why did you put the radiator on the bottom? air is going to go into the pump, if you cant mount it above it then go fan atleast
@ConorMiller92
2 жыл бұрын
Any chance you'll do an updated review now that it's out of prototype phase, or has nothing really changed with since the last time you checked this case out?
@MikeHedges1993
4 жыл бұрын
400 dollars after shipping is insane.
@mikenogo
4 жыл бұрын
Feels bad to be poor.
@WatDoino
3 жыл бұрын
Where's the power button on that case???
@shanestonn
4 жыл бұрын
you should do a video on pc parts to get, during black Friday
@Ali-ts8bv
4 жыл бұрын
what country do u live I
@morrisnieuwenhuis2535
4 жыл бұрын
Do I see your X2 fidelio's behind you in the last shot? Do you also use them for gaming? Got them on sale and they arrived today, they are great!!
@odinsplaygrounds
4 жыл бұрын
I was afraid this might be beating the ghost s1 as I just ordered that. So maybe from an egotistical standpoint I’m glad this had some flaws. That being said, I think this could be very interesting with a few tweaks and improvements. As you said it’s a prototype, but also unsure how many of the design issues will be addressed for the final release. Or potentially an MK II.
@christodang
4 жыл бұрын
Yeah I think it's promising. Thor-zone is also active on SFF forums so they're pretty in-line with the community. Have to remember the Ghost S1 also had quite a few kinks at launch so it's normal for these companies to have issues when first trying to launch a product.
@THORZONE
4 жыл бұрын
We've had internal discussions about magnetic locking for panels for quite a while now, so that's first on the line (going to check with manufacturers tomorrow). Then it's that tape (way to fragile and yellow...). Also, tighter corner tolerances and no screw holes on the outside. We're not satisfied until those things are improved :)
@easyluckable
4 жыл бұрын
$500 CAD including shipping and panel sets. I really don’t see the point for this over other small form factor case.
@johneyjoseph1318
4 жыл бұрын
I think you should compare these small cases to something that most people would have rather than to other cases.
@j0my77
4 жыл бұрын
The scraping on the PCIe riser would be a deal breaker for me, I wouldn't want to chance it
@djsmartbomb5482
4 жыл бұрын
Kickstarter this and Kickstarter that! Amazon please?!?!
@GLAXxan
4 жыл бұрын
Very unlikely in the near future. I am guessing the first batch will be from kickstarter and then sales and success will dictate future steps
@mrmike918
4 жыл бұрын
Well its not perfect, so better wait for batch 2 anyway
@Pastronomer69
4 жыл бұрын
Eyyyyy been waiting for this. Not sure it's a Ghost replacement for me but damn it's nice.
Пікірлер: 459