Thrashing Supply components are the bomb..Lance and Juan are the coolest guys and their quality is impeccable.. so glad you decided to go that way...can;t wait for the bars and risers!
@aaronross7925
Ай бұрын
Can't go wrong with Thrashin Supply. Top notch stuff from top notch people
@norsmanadventures
Ай бұрын
That cotter pin is a pain in the ass, I waited until I was swapping the exhaust before changing the brake arm but I guess I could have loosened up the brake reservoir. Thanks for sharing, Trashin has awesome stuff!
@BoDean52
Ай бұрын
They look kick ass, John. Your videos are gonna cost me a lot of money for my 24, thank you very much 😂
@Streetglide_Steve
Ай бұрын
Looks much better quality than stock parts big improvement 👍
@BNatoAk
3 күн бұрын
Black n chrome is a vibe i can groove with! My 21 FLTRX is vivid/chrome and Thrashin looks great!
@THRASHIN
Ай бұрын
Stoked on the build! Sorry we didn't have all the chrome parts available! Thanks for love!
@CYCLEFANATIX
Ай бұрын
Hell yeah !! Great products guys 🔥🔥💯 can’t wait to do the bar and risers, it’s going to look dope. Made in the 🇺🇸🇺🇸
@Country-Marshal
Ай бұрын
Brother, those parts look real nice. Always fun to do some upgrades in the garage. Cannot wait to see whats next. I'm rootin fer ya!
@davemeshamsr6000
Ай бұрын
Nice to see you putting on some Thrashin products! They have a lot of great stuff and along with enjoying your channel I also enjoy their content as well…great to watch you plan your build that seems like it will be a more practical approach for average riders to enjoy upgrades that don’t break the bank account but enhance our riding experience!👍🏼well done excited to see your projects 😊
@karlanderson1791
Ай бұрын
Thank you for giving us old school chrome lovers some content to enjoy! I can't be the only one who's just not into the blacked out look.
@geraldmurrayjr6526
Ай бұрын
Looks awesome, John!!! Thank you for your service and your sacrifice.
@Jim_Berry
Ай бұрын
Love the Thrasin guys and their parts are awesome!
@dennisthomas4548
Ай бұрын
I'm glade you went with Thrashin this time they make some awsome parts.
@KT-GoNavy
Ай бұрын
Love it John! I went all Thrashin last year on my 22RGS replacing all foot pegs, control linkages, triple tree, bars, and riser, and gauge relocation kit. I will do it again on my next RG. They are superior components, providing weight savings performance and enhancing the looks of the bike. Enjoy them and ride safely my fellow vet. Go Navy!
@cholber1
Ай бұрын
Lance and Juan make the best stuff. Quality is bar none. That’s the set up I want for mine. Looks awesome John.
@K9RickRet
Ай бұрын
Thrashin’ Supply products are definitely high quality and look fantastic! Some say, “pricey,” but ya get what ya pay for! 👍
@robertcorrigan3816
Ай бұрын
Good to see you riding with your son more. Cin-Cin and Salute 🫡💪🫶👌👍
@ltvuong1
Ай бұрын
Thrashin Supply components are amazing! I have their floorboards too and absolutely love them! No more mushy feel, and the quality is second to none! Looks great John!
@tonniecate4231
Ай бұрын
I am also 6'3 and I recommend the extensions for the floorboards.
@sfcgadget
Ай бұрын
I replaced the shift lever on my 2021 Street Glide CVO with the Thrashin Billet Shift Lever and what an improvement. Neutral is easy to find and there is less clunking when you shift. Great product.
@kevincarnes7598
Ай бұрын
Looks Awesome John!! Can’t wait to see those new bars!!
@2wheeltommy996
Ай бұрын
Thrashin makes really good stuff. Love it.
@gasmann6746
Ай бұрын
Nice work John The Thrashin components are some of the best out there by riders for riders 👍🏻🇦🇺
@MaxJW-ln4xm
Ай бұрын
Damn, kind of like the combination of the black & chrome. Switch out the shift peg for black & it would be perfect
@davidfortune5093
Ай бұрын
Looks fantastic! Looks like a completely different bike.. Love it
@raytoal
Ай бұрын
Thrashin supply make great content. Parts look like they are quality.
@alandeegan6094
Ай бұрын
The black on chrome on the brake pedal looks good
@keithrjohnson7028
Ай бұрын
Glad to see after market shifter linkage about time ,,just busting balls love your videos keep up the good stuff, hope to meet you someday.
@stamper5910
Ай бұрын
that was me bustin ya chops on shifter link lol.
@brucenelson73
Ай бұрын
I just installed the thrasher shifter linkage on my tri-glide (2019) love it feels a lot stronger along with way less play then the stock linkage. Solid as hell! Spendy but hella worth it.
@painsrides3616
Ай бұрын
🤘 The Thrashin components look great for sure, but I hope raising the boards doesn't cause you discomfort on longer rides. You know the touring rule: Little annoyances, turn into major discomforts as the miles roll on...
@kerrymcclure7503
Ай бұрын
I do like the modern blackout bikes. But I love Chrome. I was born in 1950. So I always laughed and say I was born in the Chrome age. The bike is looking good. Chrome lower fork legs and switch covers would really look good.😂😂 Be careful, ride save.
@stephanebrochu2627
Ай бұрын
I have the same set-up and this is a great upgrade from stock.
@stuartberke5845
Ай бұрын
Looks great. I really do like the look. If I can suggest one thing..... A nice chrome shifter spacer would add to the look. I got mine from Baker Customz. They have several to choose from. I have one from them. Love it.
@Roadglide117
Ай бұрын
That looks really good. Thrashin make cool stuff!
@FXDKenKim
Ай бұрын
Looks sharp!
@nbitt1319
Ай бұрын
Congratulations on the Thrashin setup! They make the best stuff out there
@alpinestar1123
Ай бұрын
The black goes good with the chrome. I just installed my 9 and 1/2 in risers in Chrome with my black aggressive high bend bars. Look good on my street glide so I did it on my road glide. Next thing is those Apex running boards
@ericroadking7564
Ай бұрын
Awesome looks great ! Yup the Tharshin stuff is top quality I have it all on my bike mix and match chrome and black !! Hope you stop and see Juan and Lance when you are out west!
@ShutterUp
Ай бұрын
Love my Thrashin boards. I haven't scraped them and I'm coming from sport bikes.
@MarcusTurner-db5qv
Ай бұрын
Nice video keep up the good work Cycle Fanatix
@MatthewTinsley-cq9lw
Ай бұрын
Looks killer 👌
@jaycosta7204
Ай бұрын
Bike is coming out AWESOME John!! Great job!! Are you going to change the front forks to Chrome also? That will look BAD ASS!! When I had my bike front end chromed out I was like " holy shit!! That is amazing!! " lol. I love Chrome to begin with anyway lol. It looks awesome on a Harley!! Great video as always!! Keep up the great work and thank you for your service!! Ride safe 🇺🇸🤘🏻💯!!
@2wheeltommy996
Ай бұрын
I just installed all floor boards and foot controls on both sides of the road glide today. I absolutely love the Thrashin products. I bought it from the 2LaneLife guys, so that they both benefit from it.
@marcussiriotis5324
Ай бұрын
Nice socks !!
@linework11
Ай бұрын
Looks awesome I'll be going with there bar riser set up as well soon.
@davemeshamsr6000
Ай бұрын
Love what you’re doing so far
@jessel.8697
Ай бұрын
Jon you should put chrome fork lowers on the bike. It will clean up the look of the front end. Before I started riding the blacked-out bikes that was always among my first mods on my bikes. The look is so much cleaner.
@Mikey_556
Ай бұрын
Lookin good⚡️
@wallymclean4386
Ай бұрын
Looks great John! I just bought all new foot controls from Thrashin...needless to say I pumped.
@antoniobenitez7980
Ай бұрын
🚬😎 the combination of black and chrome looks great.
@richstace2103
Ай бұрын
Might want to put that small washer back on the back side of your brake where the cotter pin goes
@jgk200
Ай бұрын
Looking Good John!!
@johnmccormick6689
Ай бұрын
Looks great! Maybe rotate those rear pegs 20 to 30° - angle forward it will catch your heel better and give you excellent grip…
@MrVtwinTorque
Ай бұрын
Just spectacular!
@MrQuandow
Ай бұрын
I honestly like the off set with three little black looks good.
@kellybgliding
Ай бұрын
Man that looks so good my brother
@per4mexbagger541
Ай бұрын
Thrashin supply is primo!!!
@bigg2768
Ай бұрын
Scraping my stock floor boards doesn’t hurt my feelings. They are a wear item for me. Scraping those new floor boards would absolutely hurt my feelings. Looks sweet though. 👍
@HOLYSHIFT
Ай бұрын
Beautiful outcome ! I’ve seen it in real life looks even better! But the hottest item are your socks 😂
@petegospodarzec119
Ай бұрын
Bike looks great! KTM too!!!
@victoryrider
Ай бұрын
I might have to get a harley just to run thrashin stuff lol.
@willkearney5002
Ай бұрын
John my man, the thrashin looks dope.
@CYCLEFANATIX
Ай бұрын
Thanks Will
@Macx912
Ай бұрын
Looks like you will hit the engine crash guard before the floorboard
@jaimebedolla989
Ай бұрын
I noticed same thing! 😮
@michaelofiara9732
Ай бұрын
Love Thrashin. Great stuff. Parts are works of art. Hey. Whatever happened to Big Guy? Been watching since your Myrtle Beach Harley Davidson trip.
@maconmiles2057
Ай бұрын
I also had to wait because of back order. I ordered the works, hand and foot controls. Last parts in transit.
@stevereyes
Ай бұрын
Thrashin also have an awesome KZitem channel
@claudemouawad7759
Ай бұрын
Very nice
@iamjollyrogers
Ай бұрын
Looks killer. You could leave the EZ shifter black for sure.
@jayblack3404
Ай бұрын
Looks really good John and thanks for sharing. Just curious though as it looks like the passenger pegs and brake lever are the same? If so why didn’t you just put the black on the back.
@kcrady72
Ай бұрын
Sweet!
@jimmymeeks1801
Ай бұрын
I wanna see the race with Sandy.
@jimpoulos2272
Ай бұрын
Looks great, any vibrations coming through the floorboards?
@stuartcarroll2860
Ай бұрын
Love the Thrashin stuff. Problem is, being Canadian, once you add the shipping, duty and exchange, it’s just too expensive. Trying to find a Canadian company that sells similar for my 2024 Roadglide. Not easy.
@h3r63rt
Ай бұрын
They are going to have more accessories out of stock after this video
@DyinG_BreeD_MediA
Ай бұрын
Them are some fancy socks 😅
@davemeshamsr6000
Ай бұрын
So is the rear brake lever somewhat lower than the sock one? Cuz the stock one is a little bit higher than what is comfortable for me
@michaelodea6015
Ай бұрын
How is the shifting now? I love their products basically have that setup on my bike.
@stevenconway4705
Ай бұрын
Question with a single shifter ,is it still comfortable or does it still make your foot feel too parallel?
@freebehindbars8654
Ай бұрын
You know you get free parts when you put on another color until they send the chrome. Everything is an ad.
@tariqpasha2897
Ай бұрын
Looks fantastic!!! Which cell phone mount do you have?
@davemeshamsr6000
Ай бұрын
Does the Thrashin shifter linkage have the same kind of connection like a ball socket or whatever as the stock one that seems kinda loose and wiggly? Or something sturdier?
@JonathanSBanks
Ай бұрын
Have you considered blacking out your K&N filter with a black oil kit? I think it would look killer on your bike. Did it on my CVO's wedge and it came out amazing.
@jessel.8697
Ай бұрын
How do the floorboards hold up in the rain? Are the slippery or still have good grip in the rain as well? Also, what about vibration through the boards?
@droppinlowz
Ай бұрын
Yeah that cotter pin sucks, even on my 23 RG it was a pain in the ass.
@SCBiker58
Ай бұрын
Boards look great but I have never ridden with boards that have no rubber to help isolate vibration from getting to your feet. I am curious if you feel as comfortable as stock. Bikes built for long distance and it looks like this is your build guideline let us know. I follow Thrashing as well. They have great content and beautiful parts but don’t see anything for a FLFBS.
@nickydonuts1
9 күн бұрын
what do you think of Thrashin skid plate for 2024 touring bikes
@rfcorreiaiv
Ай бұрын
do you feel more vibration in the new floorboards compared the the OEM?
@SCBiker58
Ай бұрын
My question exactly
@tylerwatters240
Ай бұрын
It’s a Harley of course they vibrate some. That’s a silly question. Stock is rubber mounted. These are hard mounted. Use some common sense. The hard mount allows more feel of the bike Ie vibration
@rfcorreiaiv
Ай бұрын
@@tylerwatters240 never have had any floorboard other than stock on my ultra or softail slim, no way to know if I dont ask.
@superglidemustang
Ай бұрын
Those socks... C'Mon Cuh
@Macx912
Ай бұрын
John, what phone mount are you using on the bars?
@tylerwatters240
Ай бұрын
He uses quad lock
@inzguy
Ай бұрын
I like the chrome look, I have same color bike, black and chrome. Problem for me is I’m 6’2 so higher floor boards prob not best for me and I also have a size 13 foot. I need more real estate not less.
@mritzmann
Ай бұрын
Typically you put some discount codes on description. Anything for this one? Cheers!
@joehorger2489
Ай бұрын
Will your cross country trip cross through my beautiful state of Utah?
@Axle-7
14 күн бұрын
What phone mount are you running?
@CYCLEFANATIX
13 күн бұрын
Quadlock
@cschauer
Ай бұрын
Hey John, are you planning to sell your Streamliner floorboards and break pedal? I’m in the market.
@davemeshamsr6000
Ай бұрын
Nice socks 😂
@hedonism11
23 күн бұрын
Hi John, do you have affiliated link for thrashin supplies? thanks
@CYCLEFANATIX
22 күн бұрын
No, sorry
@Avankaurparmar
Ай бұрын
@CycleFanatix hey john can u tell me what mad max sold for?? I mean we all know that bike had 10s of thousands if not like 30 or 40k worth of upgrades into it. That kind of gives us a idea of if the older bikes are losing value now that the new ones are out with new shape motor ect... also u should have reached out to lance jr he coukd have semt u a bar set up i mean im sure he has 1 in the warehouse like cmon u guys are bros esp 2lane boys u and lance sr rip it up when u can!! I love your guys collaborations i watch both of your guys channels lol!! Love the bike john cant wait for that stage 2 or even the big bore i know irlts coming and so do u lol!!!!
@kevonn754
Ай бұрын
Is it me or the audio on this video is faulty? Audio comes out of one side of my ear buds. Other videos are fine 🤔
@kevonn754
Ай бұрын
Nevermind, I see you mention it, faulty dgi mic
@RobertoGonzalez-fx9pm
Ай бұрын
You need a bigger garage if you are going to be a novice mechanic!
Пікірлер: 117