Gordo, I just picked up this machine yesterday, and just wanted to say thanks for making the videos. You explain and show the details very well. I am a hobbyist looking to do my project cars, and your videos are going to help a lot! Subscribed!
@66Gordo
2 жыл бұрын
Sweet!! Hope you like that new machine. They are workhorses. Glad the videos helped. Thanks for watching, commenting, and supporting my channel.
@AffinityTumbling
2 жыл бұрын
Mark D - I am in the same boat. Working on project cars. I am excited to get to use this!
@user-rr6td1jk4d
9 ай бұрын
Gordo, Just a note of thanks for your time and help so much appreciated
@66Gordo
9 ай бұрын
Glad the video helped. Thanks for watching and commenting. I appreciate it
@sarahbaker8217
Жыл бұрын
Just got my Consew yesterday and you are a huge help. Thank you. Ride safe, brother.
@66Gordo
Жыл бұрын
Cool. Congrats. Enjoy and let it pay for itself plus some. Thanks for watching, commenting, and supporting my channel
@nickmoffit3198
2 жыл бұрын
Thanks for explaining clearly and slowly....👍👍👍👍
@66Gordo
2 жыл бұрын
Hey thanks. Glad it helped. Thanks for watching, commenting, and supporting my channel
@catfish542
4 жыл бұрын
Thank you so much I bought thus machine and the retailer didn’t show me a thing you are the best
@66Gordo
4 жыл бұрын
Oh good. Congrats. I have some other videos about the machine. Check them out. Thanks for watching and commenting
@gabriellemgordon
3 жыл бұрын
Great explanation
@66Gordo
3 жыл бұрын
Thanks for the comment and watching my video. I appreciate it
@abcardenas35
Жыл бұрын
Thanks bro 🙏
@66Gordo
Жыл бұрын
Yes sir. Glad it helped. Thanks for watching and commenting. I appreciate it
@LetsPointFingers
4 жыл бұрын
Thank you for the very informative video! I’ve got a question, I hope that you can help me. My hand lift for the presser foot is very tight and difficult to lift up and down while yours seem to just flip easily. Do you have a suggestion on how to fix it. Thank you!
@66Gordo
4 жыл бұрын
Thanks for watching and commenting. I have 2 machines one the lever is really easy to lift the other one isn't. I really don't know what the deal is with them. If you have access to a sewing machine shop or distributor id ask them to be sure. Id only be guessing.
@davidbohn5632
Жыл бұрын
Have you done a video on how to adjust the presser foot height?
@66Gordo
Жыл бұрын
Hello. No I haven't did a video on that. I usually have the shop I bought my machine from do the service on my machines.
@eddieeggleston6642
2 жыл бұрын
What size thread are you using? Once I go through the 1st thread guides (the flat bar that you wrap around) and through the next 2 guides it doesn't want to flow. The thread gets stuck on the flat bar sections.
@66Gordo
2 жыл бұрын
I used 92 weight. Did you follow your thread path make sure it wasn't getting caught on anything anywhere else. I've never had that problem
@eddieeggleston6642
2 жыл бұрын
@@66Gordo I had partially followed another video and that's where trouble started. There's a small pin on right side of the first tensioner that he said to go over. And your instructions didn't. Got it going now. Your instructions are correct which I'm sure you know. Thanks for your response.
@66Gordo
2 жыл бұрын
Oh ok. Good. Glad you figured it out and it was a easy fix. Thanks for watching and commenting on my channel
@williamm4442
3 жыл бұрын
I'm having issue of getting my thread to pickup from bobin.
@66Gordo
3 жыл бұрын
I've had 2 other people have this problem. One was hand cranking his handwheel away from him rather than towards him. Another had problems after he had been messing with the tension. I don't know if the timing might be a possibility also. I hope this helps or you already figured it out
@williamm4442
3 жыл бұрын
@@66Gordo my tension got way to loose
@danzar1729
4 жыл бұрын
You missed the little pin on the tension discs.
@vadim3976
3 жыл бұрын
Nope. You're totally wrong and this is a common mistake. The only purpose of this pin is to prevent a rotation of the tension discs. He's 99% right. Threading should be done with the presser foot raised.
@Raederman85
Жыл бұрын
Do you know how much aggravation I went through because NO ONE else has said this?!?!?!? THANK YOU!!!
@Raederman85
Жыл бұрын
@@vadim3976 Thank you!!!!! My comment is to you!
@vadim3976
Жыл бұрын
@@Raederman85 Anytime (c). I have come a long way of trial and error with my sewing machines by myself. Therefore, I am always open to share info with others.
@Raederman85
Жыл бұрын
@@vadim3976 My father and half brother have been sewing for almost 40 years now in the Awning business. I’m still sort of new to it. I had to change the thread, and of course it broke trying to pull through. I went through 30 minutes of aggravation before I came across your comment as my brother and father were out on business.
@colescornerandcreations3870
3 жыл бұрын
What kind of thread does this machine use?
@66Gordo
3 жыл бұрын
I have a video called " nylon bonded thread"
@AffinityTumbling
2 жыл бұрын
@@66Gordo I was hoping you would have something for this as well!
Пікірлер: 35