Miss your videos man hope all is well and you are still making masterpieces. Learned so much from you thanks
@princeljmusic4803
7 ай бұрын
I wonder where is he now
@julyduran3153
7 ай бұрын
@princeljmusic4803 kicking ass taking over the world lol
@igs608
26 күн бұрын
Thanks for making this channel man. Even if you never upload again, you'll continue to help loads of people just by leaving these videos up.
@TheRHYSD
2 жыл бұрын
Deans, Air seal components, mosfet, quality hop rubber.
@lolgotchya
10 ай бұрын
Just got into airsoft, your videos have been extremely helpful! I have an unhealthy habit of trying to learn everything possible about what I’m getting myself into and I’ve learned the most from your channel. I just want to say thanks and let you know I hope you’re doing well with wherever you’re at now!
@tough101
9 ай бұрын
Same haha! When I get myself into a hobby I spend hours researching lol
@crazydonuts4781
7 ай бұрын
Same here. I also do it to hobby I never had touched
@gbt722
5 ай бұрын
So true😂😂😂😂😂
@an2c615
3 ай бұрын
Hey man, just wanted to say I learned a LOT from your videos and I use what I learned to this day, thank you for everything, hope you're doing well!
@notimpressedbyyourm4932
2 жыл бұрын
I think a motor, a good air seal (may need just an o ring or more) as well as a good rubber are the most important when on a budget. Putting a high speed motor into a stock gun can allow you to run a 7.4 so you don’t need to worry as much about your trigger contacts. This may not be the most ideal in some cases if the gun still shoots really slow, in which case a mosfet could be better, but I think that’s the only controversy in getting those 3 items.
@RealArexz
2 жыл бұрын
I agree with the motor and air seal part and you can optimize shimming while you are in the gearbox. really cheap but takes some time to get right.
@tobyc8905
11 ай бұрын
Wish you would come back to making videos
@jhqtech
2 жыл бұрын
Mosfet, Motor, Good Bucking. Rhop isnt necessary with things like flat hop buckings and maple leaf mr hop
@opairsoft8100
2 жыл бұрын
Eh Rhop still has the advantage of decreased groupings when done right compared to the others.
@jhqtech
2 жыл бұрын
@@opairsoft8100 maple leaf mr hop is basically r hop. Shoots just as good with way less effort. I've tested umbrella, bloomies, and several other rhop barrels, and all of them perform no better than a maple leaf mr hop with a nice barrel. Not to mention the maple leaf bucking itself is often better quality than the madbull blue/prommy, and other buckings people have to modify. And you can swap the entire bucking rather than having to clean the patch and watch for it wearing down.
@willspencer8694
Жыл бұрын
@@jhqtech yes they are pretty good in general the buckings, but still are generic to fit mitlople models, hop units etc. Rhops are designed specifically for your gun. Can't get better than that The main issue people have is they do not have the gun setup properly before installing an. Rhop. You really need to know what weights you want to run, what FPS/joules, gearbox volume ratio your running before tuning a patch for the gun .
@-Honeybee
2 жыл бұрын
First thing I did was deans & a perun. I've never had good mini tamiya.... ever. It was actually on your advice that I switched to siegetek 10:1 gears and redid my hopup. Best advice I've ever taken.
@maximk.3194
Жыл бұрын
Suggestion for a video: How to build a reliable brushless system. I myself am trying to build one right now and have run into some issues, would definitely want to see a video, and if not and you see this, please reach out if you have any tips/advice.
@TheCobracan
10 ай бұрын
When next video?
@nicksenkovs1525
2 жыл бұрын
Hey there buddy, thanks so much for all of you very detailed and super informative videos. They have helped me so very much, especially as I am a Vector owner too. Best Airsoft tech channel by far!! I PM’ed you with a bit of a request and it would be really awesome to hear back from you buddy. Many kind thanks, Nick.
@GigelBosket
2 ай бұрын
hey ,I learned a lot from you man hope you return to youtube and make the online airsoft store
@timdekold6885
2 жыл бұрын
have you noticed any significant difference between an rhop and the maple leaf mrhop bucking?
@koretacairsoft
2 жыл бұрын
No. Just buy a mr hop. R hops and flat hops and all other hops are redundant in this day and age when things like the maple leaf mr hop exists.
@holy9680
7 ай бұрын
Hey i cant understand what is the difference between 6.05 and 6.03 which is better for long range and accuracy because i want to get the DE m906c but its with 6.05 is it bad? Or the ST46D 10RS SMR SPORTS LINE G3 AEG [S&T] with 6.03 or what is the best one with no more that 300mm brrel for 200$
@Chretze
2 ай бұрын
Got a question for the tech nerds: What could cause double feeds? Nozzle too short? Hop up rubber too loose? Got double feeds happening in two Krytacs that were both upgraded with Maxx hop up units and Maple Leaf buckings. No idea how to trouble shoot this. Thanks in advance guys
@noomboom510
2 жыл бұрын
not an upgrade but cleaning the stock barrel does wonders on your accuracy other than that shimming and adding a mosfet
@StorMRagE4EVA
2 жыл бұрын
So for anyone who doesn't have experience and not enough money to blow on an R-hop get a maple leaf hopup rubber, gives the same performance does exactly the same thing as an R-hop without the issues of having for try and struggle replacing the worn out piece, because hopup rubbers are a consumable piece and breaks over time and with excess stress or if it's not oiled properly
@willspencer8694
Жыл бұрын
If people think Rhop is controversial then they clearly have not used one. Yes they are harder to setup, but when you get them right, they work so much better. Keep more FPS, hop heavier weights, good consistency The built-in rhops on bucking ls like macaron, Mr hop etc ain't bad at all, probs 85-90 of an rhop up to a point. But a really well done rhop out performs them every time.
@danielschmidt1990
Жыл бұрын
Rhop vs Shop? is there any difference at all, if yes how big of a difference?
@damirddjikic
2 жыл бұрын
shims you forgot that i never found a rly good shimmed new replica
@TheAirsoftTech
2 жыл бұрын
I don’t really consider shimming an upgrade. More maintenance and tuning in my book
@taylorp9955
2 жыл бұрын
Depending on what make aeg you have I think having a good motor would be a necessary upgrade
@bbr6729
2 жыл бұрын
Hi im new to airsoft and i brought a lancer tactical gen3 and im planning to upgrade it to have a higher rps to about 27 rps or higher while maintaning 390 to 400 fps what should i do
@RyanM444
Жыл бұрын
Where you been man? Last upload was six months ago
@fuchsia203
2 жыл бұрын
i have a arcturus ar03 pdw and im pretty sure the micro switch just died on me and the trigger contacts are probably dead. my local shop said 11.1v would be best so i used it and now regret it. what do i do? should i buy a replacement mosfet?? i am super new to airsoft and it seems everytime i buy something nice it breaks on me after 2 weeks of use and i am getting tired of this hobby. please i need something reliable for once.
@fubene5495
2 жыл бұрын
Best upgrade you can do is buy a Cyma Platinum, it only needs a maple leaf bucking to be excelent, cheap and solid, its like a deutsche shepherd, not the best at anything but good at all. If you dont want a Cyma Platinum....1st Bucking, 2nd air seal (probably only the o-rings size) and 3rd a good 7,4v battery. Later on, 4th a mosfet (gate warfet is by far the best choice, you can use the fucking same mosfet in all your AEGs...), 5th barrel, 6th hop-up chamber, 7th spring and finally 8th motor+gears, if your oem motor is a piece of trash replace it just after you buy the bucking and the good battery. Tappet and selector plate are so cheap that you can buy better ones at any time if yours arent working properly. SHS and ZCI are more than enough, you will not notice any benefit from buying more expensive brands, and i know it from own experience, my gun "full max model" has 70 less fps than the same gun "full SHS" with ZCI hop up chamber.... and it was 3 times more expensive. (i sold all the max components) same ASG motor installed, same maple leaf bucking and barrel. R-hop works great, if the install is superb, if not, its a piece of shit that will cause you tons of troubles, a good bucking is way easier and way more durable without issues.
@flyindutchmen8791
Жыл бұрын
How can I get in contact with u for a build but I don't do social media
@xdivineHART
2 жыл бұрын
I'm waiting for the deans connectors i bought from Amazon. I have a vfc Avalon cqb. Are the mosfets from vfc good enough? I don't really wanna touch anything from it's gearbox until something breaks. I have other aegs that I tinker with.
@XxJailbreakHelpZxX
2 жыл бұрын
what hopup unit and bucking set do you recommend for a qrf mod 1
@koretacairsoft
2 жыл бұрын
Standard hop unit. Mr hop or macaron 60 degree and omega nub.
@bushido6348
2 жыл бұрын
Compression is where I like to start first. Good o rings and bucking.
@josiplacic1230
7 ай бұрын
Deans mosfet but no r hop i dont think its that good for because maple leaf super macaron or mr hop is not much worst but easier to upgrade, yeah you need a barrel with that ring think on it but thats not so hard to find
@Kuraviso
2 жыл бұрын
is there any way for you to upgrade my tm mk18 ngrs?
@miguelakamickeywright8847
2 жыл бұрын
Do you think I could drop a base warhead industries brushless motor in a stock ares 308 ?
@lordshadownwolf8710
Жыл бұрын
Hello! Qiick question... I just got a package of 2 greases... 1 is silicon grease amd the other one is PTFE grease... What the difference and whay should I use on my rifle?
@AnotherDred
3 ай бұрын
Silicon goes wher plastic parts meet plastic or metal and grease for gears
@fvckthemkids
Жыл бұрын
Miss the vids brotha
@jonjohns7080
2 жыл бұрын
Yo what do you think of the maple leaf mr. Hop r hop bucking?
@calebhenderson3837
2 жыл бұрын
Please answer this! I can't decide between Maple leaf mr. hop R hop buckings or flat hoping... or paying a tech to R hop.
@koretacairsoft
2 жыл бұрын
@@calebhenderson3837 R-hops and flat hops are completely redundant when things like the maple leaf mr hop exists. They perform the same if not better without any of the hassle.
@koretacairsoft
2 жыл бұрын
It’s great, I have it in all my guns.
@calebhenderson3837
2 жыл бұрын
@@koretacairsoft Sweet! I'll be adding it to mine. Do you use prometheus barrels/standard aeg barrels? Or do you use their specific maple leaf barrels made for the Mr. hop buckings? Not the Crazy Jet inner barrels. The maple leaf ones. They are pretty hard to find.
@koretacairsoft
2 жыл бұрын
@@calebhenderson3837 Standard barrels. A good bucking makes way more of a difference than a good barrel.
@clockwork6966
2 ай бұрын
not sure about this one. mini tamiya is fine, has done the job for many years, and still does just fine - deans is definitely not mandatory (and not worth the hassle of converting all your batteries if they are already tamiya. if you are getting into airsoft then great, go for deans, you can get deans guns and deans batteries but if you are already in tamiya ecosystem then you are just fine) mosfet is useful if you insist on using 11.1v lipos. that said if you gun has a decent motor then you dont need 11.1, you can use 7.4 lipo or any other assortment of batteries and your gun will probably still fire faster than you can pull the trigger. its nice to have programable mosfets, but that especially are far from mandatory. and rhop. thought that was a joke before the actual #1 pick. rhop is practically useless, spend far too much time and effort trying to get it right when you can just buy a nice rubber like a maple leaf and get 95% of the "benefit" from a silly rhop.
@_Talksick_
2 жыл бұрын
What do you think of Maple leaf's MR. Hop buckings? Read a lot about how it is just as good as r-hop.
@crazydonuts4781
7 ай бұрын
New video? Anyways I love your content and would like to see a video about how to do an efficient tsg like you did the dsg. Hope all is well and keep being awesome .
@321rydell
Жыл бұрын
Where you bern brother?? This vid is 9months old...what you up to?? Got a aeg krytac Kriss Vector were bbs getting stuck in krytac mags?? Brand new limited edition krytac wth?? What you think it is?? Weak mags springs?? Battery 11.1 not compatible?? Something not right😢
@stupido2535
11 ай бұрын
Dont know if you still have this problem but the krytac vector mags just kind of suck, you can try to replace the feeding components with springs and followers from PTS and that may help.
@321rydell
11 ай бұрын
@@stupido2535 I did replaced the springs and it helps. The mags do suck...your right!!💯 The mags bb quantity sucks too. Had a friend with a drum mag but i dont think it feeds to well. He gets misfires. So sad...this gun aims and shoots beautiful tho😕
@jaifethroberts4193
2 жыл бұрын
What are your thoughts on Perun...
@TheGutshotpro
Жыл бұрын
Excellent for the V2 Hybrid. Easy to install and a good range of features.
@liamdk9848
Жыл бұрын
Have 3 perun hybrid v2's . Absolutely hassle free install and just work flawlessly!
@WulfPowr
Жыл бұрын
im pretty sure a flat hop like the one u get from using a maxx model hu is enough and doesnt do much more than a n r hop patch. Since its pretty hard to get a perfect rhop patch
@LeagueCritic
Жыл бұрын
i cant R hop i use a kwa KO series :D our hop ups are proprietary i would have to change nozzle and tappet first and idk if itd even be an upgrade from kwa bucking/hop
@AnotherDred
3 ай бұрын
I doubt you'll need to upgrade kwa
@spairsoft99
2 жыл бұрын
Great video
@ItsNoyzzz
2 жыл бұрын
Can I send you my gun to upgrade? I have all the upgrade parts.
@jinnrice
2 жыл бұрын
So how do we send our AEGs to you for service? Would love to send in my AEG…
@pauls.5815
Жыл бұрын
R hop is trash. When they work they are fine. Problem is they don't work very often. Littered with issues constantly. We have MrHop Maple Leaf rubbers now, that is currently the best option. Flat hop and R hop are aggravations of the past we don't need to deal with anymore.
@an2c615
Жыл бұрын
Why you no more video
@ShmeegleSon
2 жыл бұрын
Sweet!
@DesertDwella
2 жыл бұрын
I need MORE content!!! STAT!!!
@stu600cc
2 жыл бұрын
You ever put a peril in in a kwaT6?
@floppydoohickey
2 жыл бұрын
Hey man, I just wanted to say thank you for uploading your videos. I just started airsoft this season and it might be the most fun hobby I've ever had, beating real guns, rc crawlers, and maybe even dualsport riding. Your videos have really helped me get into the hobby cheap. I bought a used LCT AK with a completely trashed gearbox and wiring harness, and I was able to learn and rebuild it from mostly the advice in your videos. I think my AK came with r hop, but I'm not 100% sure. How about a new video extensively covering r hop? Exactly what it is, and why you should want it. Content, right? Also, your videos are pretty short. I want to put you on and listen to you explain things while I take apart my aegs for cleaning, maintenance, and upgrades. Just blabber about airsoft and people will listen. Thank you!
@mcgamingproyt
2 жыл бұрын
Great video as always, need to try r hop soon. Question: Why do my fps drop when I upgraded the compression system of an aeg. This happened with a lot of aegs and different kinds/brands of components. Also to other people I know. For example on an aeg with little to no air seal, I swapped the piston head, cylinder head and nozzle to “better” ones from shs (mushroom set) with no noticeable air leaks. But, the fps dropped compared to stock. All other parts remained the same. Nozzle length is same as stock, with stock hop up assembly. Only cause I can think of is higher resistance on the piston head due to the tighter seal. Any and all help is welcome
@rm70x7
2 жыл бұрын
I had this problem with the mushroom head. It's too big for standard cylinders. You can test this by putting the Piston in the cylinder and turning it upside down. It should come out on its own by gravity. If it doesn't, too much friction. To fix, remove piston head from the piston. Remove the o-ring from the piston head. Put a screw in the back of the piston head, bite the screw with a drill, and slowly spin it over some 220+ grit sand paper. Check often until it fits. It is not the piston head walls that create the seal, it is the air that is pushed thru that expands the o-ring to the cylinder walls that creates the seal. Enjoy your vastly improved fps 😎
@mcgamingproyt
2 жыл бұрын
@@rm70x7 Thanks for the tip! I will give it a try soon. Will test other piston heads too as the mushroom set doesn’t silence the aeg as much as I would of hoped
@rm70x7
2 жыл бұрын
@@mcgamingproyt I agree. It's a gimmick 😎
@Tavpanda
2 жыл бұрын
First like and comment 🤓😎 Glad I’ve upgraded all of these parts on my AEG’s
@Krippfan
2 жыл бұрын
Heaviest weight bb’s your hop up can hop
@paragonarmory
2 жыл бұрын
Using .2g BBs for anything else other than chrono? Straight to jail
@jhjustinlee
2 жыл бұрын
my personal opinion is to never open a gun that works flawlessly until something goes wrong. That being said improvements could be made with no technical experience with: 1. highest weight bbs you can slightly overhop. 2. an 11.1 battery for better cycle time/ faster rof. 3. A red dot or any optic that helps quickly and accurately hit windows doors and alleys and is bright enough to see in the day. ps: What is your opinion of flat hop, is it lazy man's r hop?
@CryeLoop
2 жыл бұрын
Agree with this 100%, enjoy the gun until it stops working especially with how well made most AEGs are these days.
@remainingrex9471
2 жыл бұрын
Flat hop is fine. Doesn't last as long as rhop. Rhops aren't hard, you just have to be focused and take your time and be willing to re-try several times. Once you get it down it'll be easy for your next guns.
@koretacairsoft
2 жыл бұрын
Flat hops and r hops are redundant today. Buy a maple leaf mr hop or macaron and call it a day. Same performance, no hassle.
@danmclean7375
2 жыл бұрын
Not every AEG benefits from 11.1 - too much juice and that AEG might scream itself to shreds. You wouldnt idle your car on red-line or attempt to put jet-fuel into a Chevy, would you?
@jhjustinlee
2 жыл бұрын
@@danmclean7375 I have technically had both hypotheticals happen lol; however I have run 11.1 on every single metal gearbox gun I own and not one single gearbox, motor, etc have failed. I blow fuses rarely but it never is a problem once I add a few amps to the new fuse. The wonderful thing is if I finally do break something I get to open it and upgrade :)
@robinsloan3976
2 жыл бұрын
What are your thoughts on S hop? Thanks
@koretacairsoft
2 жыл бұрын
Redundant. Just buy a macaron or mr hop.
@jamescameron6819
2 жыл бұрын
@@koretacairsoft agreed. If time is money, than a MR hop is cheaper and just as effective. I would argue that the s hop does perform slightly better, but unless you love to tinker with things not really worth the time
@robinsloan3976
2 жыл бұрын
@@koretacairsoft thanks. Good to know. I assume this applies to R-Hop as well
@koretacairsoft
2 жыл бұрын
@@robinsloan3976 Yes. The rhop is old tech by now that many techs still swear by only because they’ve always done so. Time to move on.
@Hazztech
2 жыл бұрын
Wtf is that rubber tubing there for
@calebhenderson3837
2 жыл бұрын
For R hoping
@powersfpv
2 жыл бұрын
I like upgrades that don't require purchases, I found a lot of success in cleaning the inner barrel and lubing the compression parts
@yando2186
2 жыл бұрын
Can we get a Rhop tutorial?
@jperdue3567
2 жыл бұрын
IDK for sure, I'm about to find out after this comment, but I'm almost certain he's got a video on that. I can't imagine he would neglect such a basic, virtually obligated upgrade.
@koretacairsoft
2 жыл бұрын
Just buy a maple leaf mr hop and an omega nub and call it a day. Works perfectly every time without any hassle.
@sebonic11
2 жыл бұрын
Hey brother thank you for all the great videos, I love your content! I just wanted to pick your brains on R hop vs. something like a Begadi mag 5 bucking with their hop up nub. Not sure if you're familiar with them but it seems like they make r hopping obsolete.
@darkangel3419
2 жыл бұрын
Can you make some videos on barrels and buckings? I have been out of the tech scene for a bit and could use a refresher on those subjects. Just got hired for a tech position at a store and will be going to get trained, but I think we're focusing on standard barrel/bucking upgrades rather than R-hopping. Also your other vids mention dmr builds, but not a clear vid on them. Love the videos and I have been here for a long time, ever since the nukefet review.
@anttechairsoft
2 жыл бұрын
I have 3 upgrades for you. 1. A 2. P 3. S APS is best gun you can money for your buy. It has full metal gearbox V2 with mosfet now and Demolition Ranch. Why waste money on tech when you can buy APS??? Craziness lol
@jhjustinlee
2 жыл бұрын
My oldest and most reliable mains has been the aps uar... Everyone seems to hate the brand but other than a few wear and tear items replaced it's been a solid 🪨
@opairsoft8100
2 жыл бұрын
The best bait
@ebehdzikraa3855
Жыл бұрын
sorry to have differet oppinion 1. dean connector is useless. since your motor contact will still use simple socket that even worse than tamiya. 2. mosfet is not worth. why spending $30 - $150 to save $5 on trigger contact? 3. R Hop is just myth. I could proof that normal rubber with stock nub could shot as far and as straight as fancy R Hop
@Luezoid
2 жыл бұрын
R-hop 🤮
@opairsoft8100
2 жыл бұрын
So you don’t want the ability to lift heavy bbs and greatly decrease groupings? Lol
@Luezoid
2 жыл бұрын
As long as you can’t buy a factory R-hop unit with barrel I will never modify somones gun into r-hop. Ive seen So many shit attempts from customers on R-hop its insane 🤦♀️
@opairsoft8100
2 жыл бұрын
@@Luezoid so your unwilling to learn how to cut tubings/glue it even if it takes 5-25 minutes of total work at max...lol ok
@koretacairsoft
2 жыл бұрын
Indeed. Completely redundant and a waste of time. Just buy a maple leaf macaron/mr hop.
@50yearoldlerookie84
2 жыл бұрын
I think a quality Hop Up unit would be one of the first 3 replacing the MosFet in your list, the reason for this suggestion being just make sure you buy an airsoft with a MosFet already installed.
@koretacairsoft
2 жыл бұрын
Why would you ever upgrade the hop unit? The standard hop unit performs best 99% of the time. “Upgrading” your hop unit is nothing but a waste of money.
@50yearoldlerookie84
2 жыл бұрын
@@koretacairsoft LoL Really? A waste of money? Not all Hop Up Units are made the same with factory guns. Many have very loose tolerances and lose their setting during game play. Not all bucking and nubs are created equal either. Not to mention poor air seal with most factory hop up units. But your opinion is your opinion but I have found my gun performing much better accuracy, fps and consistent shop to shop with an upgraded hop up unit.
@sloppyrazor
2 жыл бұрын
Haha, as soon as I heard R hop I unsubscribed
@Dani84_inst
5 ай бұрын
Which is better metal AEG gearbox or nylon AEG gearbox?
Пікірлер: 119