We configured our DT-1 with 300 psi TSC and love it. It proved to us how much time we save by not pecking. Any new machines we get from now on will definetly have TSC.
@davidpyrcz8970
Жыл бұрын
Awesome video! Thankyou!
@silvertourist
6 жыл бұрын
Well done Katherine great video, thanks
@gogop66
6 жыл бұрын
Wow Katherine is very knowledgeable and impressive. Promote immediately!
@scotts7017
6 жыл бұрын
Thanks very good information, and quite easy on the eyes unlike the other Haas presenters. (Sorry guys she has you beat hands down!)
@blackartsofficial8676
2 жыл бұрын
i wanted to know that what's the difference between form A CTS and form B CTS...
@ApitFinsyah
6 жыл бұрын
thanks for the information (y)!
@samuelroberts3744
6 жыл бұрын
I really hope Haas will figure out a way to allow turning this off without having to reset in the middle of a program.
@keefmeef
6 жыл бұрын
m88 (on) / m89 (off)
@samuelroberts3744
6 жыл бұрын
keefmeef ,you cannot drill 3 of 30 holes press feed hold and turn the TSC off to check the part, turn it back on, and cycle start. We are running a part now with 61,248 3/32 holes in it. It's hell checking hole integrity with coolant blasting at 300 psi.
@bluehandsvideo
6 жыл бұрын
Can you connect to the solenoid with a switch/relay in series? Then you can manually cut the power to the solenoid when you need to. Maybe a PITA to do, but it should do what you want. If not the solenoid, then the pump itself?
@wattsei
6 жыл бұрын
You should be able to enable/disable TSC during a “Run Stop Jog Continue” - not as easy as a dedicated button but would save you from stopping the program.
@ramrod11111
6 жыл бұрын
Press feed hold. Press stop on spindle control. When spindle stops spinning hit aux clnt(next to clnt up/down for p-cool). When ready to start hit aux clnt again. Wait for coolant to flow. Cycle start.
@JohnSmith-iz8wg
6 жыл бұрын
Woo woo......Katherine is much easier on the eyes than Mark !
@adrianprzybyek5758
3 жыл бұрын
TL;DW There is no answer how Through-Spindle Coolant works
@key2010
4 жыл бұрын
Aha! they got you! you didn't say thanks for watching and they made you do it again! *smh*
@rolltechinnovation6770
4 жыл бұрын
Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc. It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler. These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell]. Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7 call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com Enjoy the coolant being running without changing it, just keep the coolant healthy
Пікірлер: 18