I have the cheap thru hull straight out the transom on my boat, while it sounds terrific it's REALLY loud and can be a bit obnoxious especially around the dock. I think the longer pipes out the side would muffle the sound a bit and be the best option. Beautiful boat you have, obviously it's very well taken care of
@smartypantznumber2840
6 жыл бұрын
That craft is stunning.
@DetroitWrecker666
6 жыл бұрын
smartypantz Number Thank you! My father had this boat made to his liking in 1988. It was always "our thing" and after his passing in 2013 I have been trying to keep up the tradition.
@billwagoner1655
3 жыл бұрын
I have the same year. I went straight out the back. Sounds way better! The swim deck make the exhaust sound deep! I ordered aluminum manifold kit with new risers. it was 700 . The standard caption call exhaust will work. I can not remember the brand I used. In stalled it 3 years ago.
@DetroitWrecker666
3 жыл бұрын
I want to go side exit for a few reasons. One: it's how Four Winns did it originally on this boat. Two: I thought about rear exit, I don't like the idea of cutting through the transom. In fact, what I was going to do, if I did read exit was, make my holes slightly larger than they need to be, in order to put fibreglass and gel coat over the exposed wood. Before putting the tips through. Where did you buy your manifolds and risers? I would love to see how it came out.
@dalepal
6 жыл бұрын
I wouldn’t know how to install the thru hull exhaust but if I were to put one in the captain’s choice would be the way to go. I used to do a lot of boating all hours of the night and liked that my boat wasn’t too loud.
@DetroitWrecker666
6 жыл бұрын
Dale Palmer Yeah, I decided if I'm to do it. I'm doing it right. Captains Call. I have to replace my manifolds to center rise. It will be a extra $500-$600 but it's worth it to me.
@christyjones9071
3 жыл бұрын
My 88 200 Horizon has corner outlets in the back like the 210 Guess came that way with chevy 5
@DetroitWrecker666
3 жыл бұрын
Mine is a 1988 as well. Is there any way you could post or send me some detailed pictures of the entire exhaust system? My email is Southernbaystudio@gmail.com
@DetroitWrecker666
3 жыл бұрын
VERY MUCH appreciated the pics! Can't wait to get the engine and routing pics. You have NO IDEA how long I have been waiting for someone to send some pics of this. THANK YOU!!!
@richbatz139
3 жыл бұрын
I had a 88 horizon with sport inter that came out the corners right below the swim platform. so they 90* off the manifold into some fiberglass mufflers to tame it down a little then 90d again out into some stainless ports. I also had a king cobra outdrive.
@kevinmanier6639
Жыл бұрын
I live in White Lake,mi And I have a four Winns 190 Horizon would like to do the same with through hall exhaust or the sides. Please let me know any information you can give me while I have my floor torn apart to redo the stringers. Thank you
@DetroitWrecker666
Жыл бұрын
Send me an email Southernbaystudio@gmail.com
@jeffwarner4225
5 жыл бұрын
Very cool boat, my personal opinion, if it aint broke dont fix it! Is your problem finding the exhaust that fits? Or the right parts?
@DetroitWrecker666
5 жыл бұрын
I'm trying to honor my father's wishes. He kept talking about it and then said "maybe you can do it after I croak" He passed about 5 years ago and I have been wanting to get it done. My main question is if I can do captains call with the current exhaust risers? Or if I will have to switch to center rise in order to provide enough room?
@jeffwarner4225
5 жыл бұрын
@@DetroitWrecker666 Unfortunately I cant help with this question, I do a lot of work on center console fishing boats. Mostly fiberglass and gel-coat repairs.
@jeffwarner4225
5 жыл бұрын
@@DetroitWrecker666 whats your facebook lets be friends? I will take you big fish fishing if you come to South FL! Go get a shark or grouper.
@DetroitWrecker666
5 жыл бұрын
@@jeffwarner4225 I don't really do fb. But I'm here all the time and my email address is available under the About Tab
@jeffwarner4225
5 жыл бұрын
@@DetroitWrecker666 good enough! cheers
@Mojave-iv1dm
6 жыл бұрын
I have a 1990 horizon 220 omc 5.7 and also want to do the side exit captains call. Did you get it installed yet?
@DetroitWrecker666
6 жыл бұрын
Kevin Karafa I have not installed it yet. However, the best I have found is the people at Corsa who will put together a package for you at no extra charge. If you have the OMC manifolds which exit rear and face down, you will have to replace them with a center rise manifold that can be found between $500-$800 for the pair. When I put my package together I will do a install video.
@Mojave-iv1dm
6 жыл бұрын
Detroit Wrecker thanks for the info. Ill look into that. Looking forward to your install video
@jeffp6882
5 жыл бұрын
Hi did you ever get the exhaust put on. I have a 205 sundowner and want a exhaust. But the shop around here in Michigan told me 3000 at the least. Is this true???
@DetroitWrecker666
5 жыл бұрын
They may charge $3000 to do it for you. Here's the deal. You can add thru hull to your Sundowner without any problems. Just adding thru hull will not cost you more than $300. However, if you want Captains Call (where you can turn it on or off) depending on your manifolds will make the difference. If your exhaust manifolds are like mine (OMC with rear and down facing risers) you may not have enough room and may have to replace them with center rise manifolds. These can be purchased online for around $5-$800 for the pair. There is also a boat salvage yard down Telegraph Rd near Monroe where you can go out and pull your own part and they have thousands of parts inside the building. Prices are reasonable. The Corsa Thru Hull Captains Call kit can be purchased for about $1200 and comes with everything you need to install. If you are handy and work on your own stuff, and do not have to replace the manifolds, the parts and install should not cost you more than $1500. I have not installed mine yet. Boat is in storage and I plan to install in the Spring.
@jeffp6882
5 жыл бұрын
Ok well i do work on my own stuff. But not to sure if i want to drill holes through boat alone hahahahaha.
@DetroitWrecker666
5 жыл бұрын
@@jeffp6882 not too big of a deal. So long as you make a template. Corsa lays it out exactly how to make the template for the holes. That's probably the most stressful part of the project.
@jeffwarner4225
5 жыл бұрын
@@DetroitWrecker666 my stomping ground, born in Erie Michigan. I got hit by a car on Monroe, ruined my leg.
@DetroitWrecker666
5 жыл бұрын
@@jeffwarner4225 Ok. My significant other works at Erie Mason High School. I launch out of Bolles Harbor all the time during waleye season.
@joes9688
6 жыл бұрын
I have a 1980 formula thunderbird and i have the same problem... im not gonna spend $1000 on new risers and captains call so ima fab up homemade ones with manual valves
@DetroitWrecker666
6 жыл бұрын
I am toying with the valve idea myself. Let's keep in touch.
@DetroitWrecker666
6 жыл бұрын
Joe spruell Did you ever get around to fabbing up your exhaust?
@joes9688
6 жыл бұрын
Detroit Wrecker no i ran into some finacial problems project is on hold right now.... but i was just going to basiclly make my own captans call using the same build format they are and weld it all together
@nated9456
5 жыл бұрын
Update?
@DetroitWrecker666
5 жыл бұрын
I do believe it is happening. Although, I think I will be going with true thru hull. No captains call. I am having a new mooring cover built, as I type this. As well as, new stereo system going in this year. So, that kind of shot my plans (cash wise) for doing new manifolds and captains call. Maybe nest year for the rest of it. I will do a video when I make the change. Thanks!
Пікірлер: 52