Barry can you do a Christmas special and take us on a tour of your Garage? We'd like that.
@aeiouxs
4 жыл бұрын
seconded. fascinated about Barrys Garage!
@bass-man5401
4 жыл бұрын
I 3rd that. It would be cool to see the entire man cave
@ronaldkasteel3459
4 жыл бұрын
the first thing we see in that vid will be dismantled, hope u have a month to watch the whole garage !
@philipmulligan4325
4 жыл бұрын
@@ronaldkasteel3459 What a treat.
@theozzie8459
2 жыл бұрын
Barry is a national "sim racer" treasure. Thanks Barry for being the father many of us didn't have :)
@scuderiabazzane6064
4 жыл бұрын
I bought this piece since day 1! I have 4 TM rims, I am so happy with the QR system made by Peter
@r0q
4 жыл бұрын
Grats! Which wheels do you have? Did you have to solder any to get the QR installed?
@scuderiabazzane6064
4 жыл бұрын
r0q I have a Sparco P310, a Sparco R383, a OpenWheel and Ferrari F1. The OpenWheel needs the soldering as seen in this video, the Ferrari wants a specific version of the mod. Here is a compatibility table for the mod: kzitem.info?q=https%3A%2F%2Fdocs.google.com%2Fspreadsheets%2Fd%2F1LpqmbL9yDsH3rkgjHN2NHgws0mCfYn70RgPBYuT9ydI%2Fedit%3Fusp%3Dsharing&redir_token=JXXEmy5pqDZ6dz_u-sRKbuPF67p8MTU3MDU2MDkwNUAxNTcwNDc0NTA1&event=video_description&v=ll4yg3jt8_0
@mattsmechanicalssi5833
4 жыл бұрын
I do appreciate just how in depth your reviews are. I am glad that I found your channel. Have a great day! o7
@cool4real82
4 жыл бұрын
Thanks Barry and Peter for this! Will help a lot of people, including me.
@OkiDingo
4 жыл бұрын
I just bought the STL files from Peter A, the models looks great in Cura. Just an FYI if you are going to print your own parts, they are all around 7 hour prints. For my set up I will print the base, F1 wheel, and standard wheel. Looking at about 30 hours of printing. If you buy them pre-printed from Karpal Sim, I want people to understand the cost. Awesome work, can’t wait to get these up and running!!!!
@Maddo03
3 жыл бұрын
I wish thrustmaster would just make an official quick release system that just connects to the existing connections.
@Witcher58
2 жыл бұрын
Thrustmaster could be swimming in money by selling simple accessories and stuff like dust covers. Market-wise speaking it is one of the dumbest companies ever.
@fixedfrank
4 жыл бұрын
Barry's review of these very ingenious quick releases for the TM based convinced me that I wanted them. So I went to Peter's ebay page for these items. Not surprised, his current stock at the time was pretty light. So I contacted Peter via email. Through that, I got on a email list for his next run. Long story short, I got a base adapter and two for my TM wheels (599 evo with a Momo Mod 31 custom drilled by Ricmotech / TSPC open wheel) Installation (including custom fitment) was easy. Basically followed both Barry's and Peter's videos. Only issue I encountered was the length of the M4 bolts which connect the Wheel QR Adapter was a bit short. This was due to my custom drilled Momo Mod 31 wheel which I think is a couple mm's thicker than the stock 599 evo TM wheel. I measured them as about 45 mm. Got 50 mm length bolts and it now solidly assembled. Tested all the buttons and paddles and everything works! Removal and re-installation with the new QR is great! This is my favorite mod for my TM equipment! Thank you Peter for making these and Barry for reviewing them!
@nothinghere3591
4 жыл бұрын
You good Sir have the most informative vids on youtube. As I’m so new to the community, I really appriciate the work on these videos, Easy to follow. Wish I had the opportunity to race you sometime. Keep it up. Much love from Sweden.
@marcusbunce3406
4 жыл бұрын
I use a PC case thumb screw to tighten the collar lock on wheel base,, it gives a better grip to hand tighten my wheels on... Not once has a rim loosened ;;; had TS-PC since pre order,, love it,, casual league every Sunday I recon the collar would split in time,,,,, wondered if anyone had that issue 🤔 Great videos 👁👁
@Sithhy
2 жыл бұрын
Will definitely be more useful for the upcoming Thrustmaster direct drive wheelbase
@ruuti74
4 жыл бұрын
Long waited upgrade for Thrustmaster Wheels
@Delistd
4 жыл бұрын
I would love for you to do beginners, intermediate, and professional setup recommendations for a racing sim setup for PC gaming/racing. Would love you see what you would recommend and why.
@einotorkkel9817
4 жыл бұрын
Yes!
@GregoryShtevensh
3 ай бұрын
I use PLA to make 3d printed QR1 for my CSL DD 8nm. Lots of infill, lots of walls, low resolution and a good filament, and you're set! I use the SRM mini emulator and a 350mm wheel, and added my own 8mm bearings and 3x pen springs. Not bad for a free QR
@MrSrimera
4 жыл бұрын
It leaves the plug on the back of the wheel exposed, so you got to be sure not to damage it when it's lying around.
@petermakesthings7342
4 жыл бұрын
Yes it does, but tbh I'm not very gentle with my wheels and have been using this qr for over 6mths without any damage to the plug. And even if it gets damaged it's super simple to replace it for
@r0q
4 жыл бұрын
I imagine a lot of people that were hoping for a mod like this are going to run for the hills as soon as the word "solder" comes up.
@simonedesantis7717
4 жыл бұрын
beautiful video pity that the product on ebay is no longer available
@bobbychilds3080
4 жыл бұрын
This is now being added to my wish list
@mandel4889
4 жыл бұрын
Screws should always be threaded in carefully counter clockwise until you feel that it seats in the old threads so you dont carve new threads in the plastic. This teqnice should also be used on metal to increse its lifespan.
@vinzvega5614
3 жыл бұрын
We love you barry. Just to let you know :D
@ShawnT_1JZ
4 жыл бұрын
i personally use a cnc machines adapter made by Ripp. along with a VMS Racing quick release, (identical to slim NRG QR), iv had zero issues, on the side of 3dprinted parts, iv been through 2 adapters now, by 2 different sellers, use metal no 3d printed stuff to hold your wheels
@mralfredo7643
3 жыл бұрын
Hello 🤗 Barry !! I am subscribed to your channel and I admire your work, being passionate about simracing and not mastering 100% of English languages, but I can understand through images. I have a question: can you make a test video of the steering wheel thrustmaster sf1000 edition with its defects and qualities as you know how to do so well. If this is possible of course. thank you so much Barry. Congratulations 👌👍
@christopherlee3041
4 жыл бұрын
Been following all your videos, especially the Thrustmaster specific ones. I am curious about the RC shock pedal mods. Will you be reviewing that soon?
@Tguedes98
3 жыл бұрын
I tried this mod and had to remove it! the mod itself is very well done, the problem is the chinesium quick release that is sold separately that has some really poor tolerances! this translates into a lot of play in the quick release system itself making it completely impossible to use for me, cuz every time the force feedback snaps to the other side the quick release system jumps the gap and makes a clicking sound that makes it impossible for me to use it! buying this mod, u must take into consideration buying like 4 quick release from 2 different manufacturers or something like that
@DavidGarcia-oi5nt
3 жыл бұрын
ok so why not just put a bit of double sided tape/ tape with a bit of fabric to stop the noise then?
@Tguedes98
3 жыл бұрын
@@DavidGarcia-oi5nt i bought 2 more qr and they were good'ish, good enough to use U cant use double sided tape, or any tape at all. There's no space, cuz the problem is between the quick release metal parts
@youngganghis5236
3 жыл бұрын
Not sure if yours did come or not with it but I was watching Peter's videos about the perfect fit and includes two 3d pieces than you can insert to fix the wiggle but if you do not want the piece and still have it I dont mind buying. You are portuguese too?
@Tguedes98
3 жыл бұрын
@@youngganghis5236 Yes I am Portuguese too! Thing is the qr release system is almost unusable! I bought the entire thing from Peter and it still wasn't enough! the qr's are really bad, but if u really want them I can sell them
@davethestalker
Жыл бұрын
Are the 4 screws around the + prone to coming loose? My T500 is on life support now. Whenever the wheel was loose, those 4 screws have to be tightened down HARD. My v1 model has the short screws. I’m hoping to get a T-GT2 in a month or so. It depends on how my GiveSendGo fundraiser goes.
@HPayne62
4 жыл бұрын
I hope this guy does a follow-up that does a NASCAR/Indy/F1 style that has the pull-towards-you-ring instead of the rotating lock like the one that is on here.
@pewpdukem
2 жыл бұрын
What a pro voice! You could do voiceover work for movie trailers.
@alextanner3500
4 жыл бұрын
Hey Barry what do you prefer out of these two rigs the fanatec dd1 with the v2 Formula rim, podium shifters with v3 pedals or the simucube 2 pro with heusinkveld sprints and the ascher f-28 Wheel. Both will be mounted on the gt1 rig but the simucube will be mounted on a deck using a bracket whereas the dd1 will use the Simlab podium brackets? I’m personally leaning to the simucube as all the parts on that side are so high in quality relative to the fanatec, but I would like to know your view. And be sure to put down any suggestions. Thanks Barry!
@dylanangel2870
4 жыл бұрын
i have my screw hanging out and just yank on it to tighten it up and it stays tight for many hours, i check before each day i play. the reason why this quick release wont work is when you change rims up need to unplug the base usb to reset it, to recognise the new rim properly, especially if there is a differing number of buttons. you'll have to look at which buttons are which numbers. the base needs a reset button on it
@MrCatalysis101
4 жыл бұрын
Thank you Barry.
@tenbob1973
7 ай бұрын
I know this is an old video but just want to know if you used any flux when desoldering and resoldering that wire? Sorry, have never soldered before!
@ShawnT_1JZ
4 жыл бұрын
ouch that hurt at 15:12 ..... sais in thrustmaster manual only tightened that screw until it gets firm, it should never ever go all the way in otherwise you may crack the collar part of the wheel (Rim) with the threads, of it will just completly dig in and destroy the treads,
@Jivesauce
4 жыл бұрын
Hi Barry, great review as always. I wonder if you would be willing to measure the distance between the front of the wheelbase and the top of the plate of the open wheel rim. I know you said it didn't feel like it added much length, but I'm trying to get a more precise idea of how it would effect my setup.
@simracinggarage3026
4 жыл бұрын
Sorry, that wheel was on loan from a fellow Sim Racer. Already gave it back to him.
@petermakesthings7342
4 жыл бұрын
I don't have open wheel, but P310 (which seems to have the same dimensions) has exactly 111mm from the flat side of wheel base (ie the one around tm 'screw on' mounting cover) to the front of wheel metal plate, hope that helps :)
@Jivesauce
4 жыл бұрын
@@simracinggarage3026 No problem, Barry, thanks for the reply.
@Jivesauce
4 жыл бұрын
@@petermakesthings7342 Perfect, thanks for the info!
@Dartoras
3 жыл бұрын
if you change wheel every two weeks and the average time of using the wheel is about 6 hours every weekend by simply keeping the thrustmaster OEM QR over a year and a half you gonna have spend the same time as you gonna spend just replacing the QR "there there"
@ericmorgan7780
2 ай бұрын
Barry I need help I have the thrustmaster ferrari f1 1000 wheel I open the wheel to expose the spider to heat the bolts to remove them nothing worked the bolts will not move can you buy the spider..
@user-un4ju8so9v
7 ай бұрын
Hello, I bought a brand new TX leather edition wheel and there is a serious problem with it. I play with three-four fingers(with one hand, no full grip) and regardless of the setting, from the recommended to almost maximum, the FFB is either absent or very faintly felt. When I tested the "forces" from the control panel, there are no vibrations, only the steering wheel turns with some of them. The store refused me a replacement, they sent it to a service center. The base does not overheating at all. What do you think the problem might be? Thanks!
@stefanbrown8176
4 жыл бұрын
my question is what is it gonna do to the internals of the wheel after a while as there is extra weight and leverage added to the wheel
@Balleknack
2 жыл бұрын
I really like this thing and I'm planning on buying but I'm a bit hesitant to PLA? Will it be durable enough? I remember a friend printing a adapter for med in PLA and it snapped after a while :(
@robosub
4 жыл бұрын
fantastic in ebay it's "out of stock" I have three wheels an ad on for t gt - will it be available again?
@dylanzrim1011
4 жыл бұрын
Robo Sub not likely, Chinese part
@dylanzrim1011
4 жыл бұрын
China isn’t doing so well
@OkiDingo
4 жыл бұрын
Dylan Zrim - only the QR is from China. You can buy them on amazon. I believe OP is referring to the 3D printed parts which can be purchased at www.kapral.store
@user-zn6kb3vo3g
5 ай бұрын
Purchase link please ?
@tenbob1973
7 ай бұрын
If you have to shut down your base everytime you change your wheel I see no point in saving 30 seconds. But damn, I do want it 😂
@bobbyosborne2375
10 ай бұрын
Almost works like a firehose connector.
@lucaj-v23
2 жыл бұрын
Ebay link doesnt work...
@monkeysgaming5914
3 жыл бұрын
Hi everyone, sorry but you don't find this thrustamaster system around anymore? the link gives an error and I can't find it anywhere ...
@theweirdguyinthecorner
3 жыл бұрын
Because literally no-one is mentioning it anywhere the guy charges £10 GBP per STL file with a minimum of 3 of the 4 files required so it's only £3 less than buying a pre printed kit to get the files plus you need to buy the quick release aswell
@bs_shifty_4207
Жыл бұрын
Hi I ordered my parts from kapral sim racing store but my slim quick release part is different please help
@coastaku1954
4 жыл бұрын
During the driving segment, I saw some Yellow and black shoes in the bottom right of the video, what are they?
@CHRISrnbWORLD
4 жыл бұрын
How this works with custom rims?
@TrueBlade-1889
Жыл бұрын
Link not working to eBay. Please would you provide name of seller so I can order the correct one. Thank you 😊
@districtdex3729
4 жыл бұрын
Hey Barry, do you know if this is still available. I have checked out the link but they are sold out.
@OkiDingo
4 жыл бұрын
I contacted Peter directly and you can buy them from www.kapral.store, personally I bought the STLs and will print them out.
@I8Mart1915
4 жыл бұрын
Guys I have a problem with my TM T3PA pro pedal set. When I first calibrate them they seem OK, but after 5-10 minutes in game they lose the brake biting point to an extend that no matter how hard I press the brake it only registers %20 of brake. I'm about to lose my sanity! Please help...
@Jnibbs24
3 жыл бұрын
So would I buy the same one for my aftermarket 350mm wheel too?
@BIGHUHA15
Жыл бұрын
i’m afraid to do this lol
@karadenizfamily
3 жыл бұрын
I'm new to sim racing. What game is this Barry showing? What are the best PS4 games for sim racing? For Thrustmaster 300RS GT with TH8A?
@MIKEDRIFT
8 ай бұрын
Anyone know where to get this quick release setup these days ????
@MasterD427
4 жыл бұрын
Flex on 45.00 is not so typical form my t500. It happened when the wheel is a bit unscrew.
@petermakesthings7342
4 жыл бұрын
idk why did it look this way on Barry's video, maybe screws weren't tight enough, here's a quick test I did: kzitem.info/news/bejne/yHh7sJObkYB1eWU
@OliverPohl
4 жыл бұрын
Can you tell me, what Ferrari Wheel lies on your table??? It looks like it has some LED's on the top.
@chuckwagon7354
3 жыл бұрын
The link to eBay doesn't work. Looks like there are loads of these now from different sources.
@eugenethorne5656
6 ай бұрын
hello the link did not take me to the ebay page to buy the kit. can you send it to me?
@hooligander
4 жыл бұрын
Looks like Barry sold all the wheel adapters for Pete. Shame I wanted to buy a few
@ryanchenoweth5673
4 жыл бұрын
Make one for OSW! 👏👏👏👏👏
@felipealarcon3473
4 жыл бұрын
excellent product. Does it really work perfect? in minute 37:20 I notice that the quick release itself has an slack
@petermakesthings7342
4 жыл бұрын
I think Barry didn't have it screwed in fully tight, the set I'm using has exactly the same flex as the original, see the short video I just uploaded: kzitem.info/news/bejne/yHh7sJObkYB1eWU
@knightnight0237
4 жыл бұрын
Please do a review of the fanatec v2.5 base with the fanalab software. A lot of people will watch that particular video
@simracinggarage3026
4 жыл бұрын
It's on the schedule.
@gregturberville5366
3 жыл бұрын
Where can you find that Ferrari rim
@johncochran9392
4 жыл бұрын
Is the QR as tight as the OEM connection when the wheel is on? And how much extra steering column length does the QR add? More length equals more flex, yes?
@dylanzrim1011
4 жыл бұрын
John Cochran looks like less than an inch
@dylanzrim1011
4 жыл бұрын
Keep in mind this kinda innovation will appear in next gen
@dylanzrim1011
4 жыл бұрын
Good part is he can probably make mods for other systems with this part. Sadly right now with it being a Chinese made QR its in short supply
@robtectec5098
4 жыл бұрын
Show de bola
@CHRISrnbWORLD
4 жыл бұрын
Where did you get the potentiometer knobs from?
@rr3bro463
4 жыл бұрын
Great informational videos as always, priceless garage 🏎🏁💨🌪 Can you or someone reading this help me? I’m trying to find a ( tm evolution + cable) in the US... it’s for the thrustmaster tss handbrake Sparco mod. Thanks in advance for any helpful info
@artokumpulainen9237
8 ай бұрын
Does this work on t300rs gt
@burgerbait
4 жыл бұрын
How does he stop the ebay quick release from being such a lose fit? Mine has a lot of play and makes a lot when in use.
@petermakesthings7342
4 жыл бұрын
That's my secret sauce ;) but seriously it's a LOT of testing and tweaking the dimensions of the adapter, also there's still a need to do some manual fitting but it's super easy and in worst case requires using a bit of duct tape (details in video linked in the description)
@kolysion164
3 жыл бұрын
is there flex ??
@user-fz8uc2ib8e
Жыл бұрын
Hi mate are you still making?
@Manuellj
4 жыл бұрын
Hola, donde lo puedo comprar?
@SPEEDREAM
4 жыл бұрын
So sad...cant find this anymore...
@Mcorpmike
4 жыл бұрын
does this fit the F1 ferrari wheel?
@OhItsThat
4 жыл бұрын
TM has been so quiet lately. I wonder what they have in the works..??...if anything.
@HazzaMedia
4 жыл бұрын
TM wheel to DD wheel?
@MrHeat-ie1zx
4 жыл бұрын
Barry, is that a $250 Hakko Soldering station? Are you serious right now?
@simracinggarage3026
4 жыл бұрын
Yeah, I do a lot of soldering building my racing quads and other things. Makes life a bit easier when you have good tools.
@OkiDingo
4 жыл бұрын
Sim Racing Garage - agreed! Proper tools make a world of difference and less headaches which equals being more productive. @Mr. Heat! That’s kinda a weird question / statement.
@themysteriousjames6756
4 жыл бұрын
Does this work for the TMX for Xbox too?
@marcocastreje6297
3 жыл бұрын
When its posible buy the same?
@lennertester
Жыл бұрын
Works on PlayStation?
@mutenroshi6171
4 жыл бұрын
Hello, there will be new stock,
@marcusbunce3406
4 жыл бұрын
Don’t forget to remind yourself to turn the power to the wheel base OFF before you change rims,,, TS-PC might only be £500 but it’ll still twat your wrists hard enough 🥴
@marcusbunce3406
4 жыл бұрын
JOE nice one,, 👍 I just never change a wheel without powering off,, I’ve belted my head plugging in usb 🙄 I also noticed occasionally that the steering lock went from my preferred 410 back up to max,,, Actually;;;; I’m probably a pain in the neck on race nites 🤪🤓 especially in VR👁👁 Drive polite
@TheLuzifer30
2 жыл бұрын
Hey guys, i need help xD i think im just stupid, because I´m not able to run my led´s on the tm 488 steering. Pls help me :,(
@marcocastreje6297
3 жыл бұрын
Link quick release?
@JayZroad
4 жыл бұрын
Sold out!?
@petermakesthings7342
4 жыл бұрын
I had a pretty large wave of orders, please check an update on my video, reddit or the comment in this video for updates around end of this wk
@azaralamouri5140
4 жыл бұрын
Thrustmaster budget DD whennnnnnnnnnnnnnn?
@RacingWithChuck27
2 жыл бұрын
Few years old. Looks like it adds about 2-3” on the shaft. Not a fan of the cheap pot metal used from China 🤨
@mkatakm
12 күн бұрын
For those who didn't see a real QR.
@bertduyck4412
2 жыл бұрын
Barry, Sorry but this part is not very strong. The flex is probably also the adapter on the thrustmaster and its not full hard plastic. It will just break during races and flex will get worse.
@1027hristo
4 жыл бұрын
Barry this is also quite interesting: www.reddit.com/r/simracing/comments/ddg9tg/thrustmaster_wheel_quick_change_modification/
@johnniewalkerprada9688
3 жыл бұрын
hello good evening I would like to have these parts for my Thrustmaster TS-XW Servo Base and Steering Wheel, ThrustmasterTM Open Wheel AddOn (Steering Wheel AddOn, 28 cm, I have sent mail addressed to petermakesthings @ gmail, filling in what I request but I still have no response and I am very interested in the Quick Release .... sorry but I am translating for you through Google I would very much like you to answer me thank you
@philipmulligan4325
4 жыл бұрын
Hey I'm first to leave a comment. Cool.
@metheult
4 жыл бұрын
Hey Philip with a surname of Mulligan are you Irish? Just curious my friend.
@philipmulligan4325
4 жыл бұрын
@@metheult Parents where Irish bur I was Born in England, Leicester,
@metheult
4 жыл бұрын
@@philipmulligan4325 Ah cool I spotted the surname a friend of mine is from Foxford Ireland. Irish myself Bray Co Wicklow.........Like your post say's you were first to comment.
@cocosloan3748
4 жыл бұрын
You have a real car Barry? LOL
@itzanopinion
4 жыл бұрын
This video was 40 minutes too long! Seriously? 53+ minute long video of a quick release mechanism? *ABSURD*
@FadedSev3n
4 жыл бұрын
Pretty much all his videos are around this length. He goes into a lot of depth and detail on these, personally I think its great cause you don't usually see this much details regarding sim racing products.
Пікірлер: 143