On disk type is it possible to flush the filter without disassembling it, you mentioned it but it was not very clear.t
@dripdepot
19 күн бұрын
Great question! It can be done, but with manual disc filters typically is not -- with a disc filter, you can accomplish this by plumbing in some additional piping and valves to reverse the flow of water. This will bring water in through the center of the element, and if you have the flushing valves open, push water through the inside of the discs and then out, ideally flushing debris that has collected on the outside of the discs during normal operation. You can likely see the problem with that already -- what is the quality of the water that's going through the center of the discs? That's one place you don't want dirty water to go, as it will then get into the system when normal flow direction is reestablished. Netafim described the process (including a quick diagram) and the inherent problems pretty well in this little document: www.netafimusa.com/bynder/E22FC43F-B0E6-40BA-B503C344A15A3C7E-backflushing-manual-disc-filters.pdf
Пікірлер: 2