Where did you get the cheese plate used on TB50 Battery?
@JIMMY_NEMESIS
Жыл бұрын
seriously thank for the in-depth tutorial on this amazing product can't wait for the in-depth tutorial on the Tilta Hydra-Arm Mini 😅
@RepaireroftheBreach
3 ай бұрын
You missed the whole monitor assembly.
@CappsProductions
2 ай бұрын
15:54 could someone please clarify what he’s talking about here?
@danielemagoni2555
Жыл бұрын
Hello, I can’t balance in one way to use in vertical and horizontal. I dont understand how to do in that way, I can just balance for horizontal or vertical. Thanks
@EmeraldAudiovisual
2 жыл бұрын
The BMPCC 6k takes CFast cards, not CF (which stands for Compact Flash and is the predecessor). Also, by using SSD to record, you sacrifice the option of camera control from the DJI Ronin RS2 of the BMPCC 6k. And yes, that fully works, if you have updated the gimbal to the latest firmware. Also, the HDMI cable should ALWAYS be the last cable to be plugged in to avoid the camera to use it as a ground plane and burn it's HDMI port out. The BMPCC are especially prone for this. As for the cable to the RSS port of the RavenEye, that's meant for remote control of the camera, when you don't use it with the DJI Ronin RS2. Is there any particular reason, that you connected that from the gimbal to the RavenEye. Because that most certainly is not mentioned in the manual anywhere. As you haven't allowed for an external battery for the BMPCC, you're not going to have a long battery lifetime. Smallrig make a special arca-swiss plate for the BMPCC, that lets you slide it sideways and that way you get more free space between the battery side of the camera and the motor of the gimbal. That also eliminates half the weights, that you have added there. And with the Niceyrig V-mount plate that gets mounted under the Smallrig counterweight bracket, you can then mount a slimline V-lock pack or the Core SWX Powerbase Edge battery under the BMPCC and get a much better balance plus a 4 hour battery lifetime for the BMPCC.
@motionarytechreviews
2 жыл бұрын
Thank you for the detail feedback. We will try harder to improve the quality of our videos. We hope that you could at least a little added value?
@luclaflamme4712
Жыл бұрын
Wouldn't the raveneye be in the way of the vmount battery? Even one with a slim profile?
@EmeraldAudiovisual
Жыл бұрын
@@luclaflamme4712 If you want to mount a V-mount under the camera ? Yes. But you can always move the RavenEye. It can be mounted anywhere, that you've got a cold shoe for it.
@ivanmadethis
Жыл бұрын
Love the full breakdown of everything and how detailed this video was. Answered a lot of my questions. Just ordered the Float today and can't wait to start playing around with it!
@mensfashion7761
Жыл бұрын
how did u get the power for the BMPCC since u have two battery and i did not see that u connect it also how did u set up the tilta camera controller
@pr1sm55
2 жыл бұрын
Even the skate reel footage looked wobbly. What is the problem there? Like shaking left to right, right to left? Seems less stable than without the Float or am I drunk?
@motionarytechreviews
2 жыл бұрын
It's true the footage is wobbly. It was a left to right movement, i think that is probably because i was still practicing with it, with more practice i probably could get better results.
@mensfashion7761
10 ай бұрын
ho do u power the camera since the float comes with one coniction for dji
@UrbanTreats
4 ай бұрын
Thank you for the video, what is the battery pack you are using in this video ?
@paulconway1176
2 жыл бұрын
Hmmm for what that Float costs, the camera and the RC3P I would just go for a Ronin 4D and be done with it.
@motionarytechreviews
2 жыл бұрын
There are some specific movements which you can`t do with the Chicken 4D 😀
@paulconway1176
2 жыл бұрын
@@motionarytechreviews 🤣
@camerariggingmods9667
Жыл бұрын
Hey thanks for shut out ❤️🙏
@gges1605
7 ай бұрын
I landed up sending it straight back the grip at the rosette on the belt is too shallow and not strong enough it very nearly cost me my gear as it slipped while I had camera attached and fell thankfully I managed to catch it,the ridges need to be bigger so it actually holds when you tighten it up I couldn’t trust that it would not happen again, I also found the belt extremely uncomfortable
@zaer81
2 жыл бұрын
Nice
@JitDawgBruhDang
Жыл бұрын
How do you power the gimbal?
@KJ4YIG
2 жыл бұрын
Can you put on a smallrig cage? Appears so. Just wanted to be sure. I have 6kpro and g2 with small rig cages
@sk.newmedia
2 жыл бұрын
I also got the float and tested it the last weeks. The main con is, that the arm is too weak or everytime at the edge of loading capatilibies. The second thing is, the belt does not fit very well. it pushes unpleasent to the lower back. i already bought a vest to it. Now it´s slightly more pleasent but not very well. the third point is the poorly made bolt that holds the float system on the arm. i wouldn't be surprised if the part breaks at some point and the entire setup falls to the ground. no steel was used here. I can´t understand why they used such cheap material.
@sk.newmedia
2 жыл бұрын
i wouldn´t recommend this system for that price
@ernestasnemanis3616
Жыл бұрын
@@sk.newmedia It is the cheapest out there I think :D
@drumsonly25
Жыл бұрын
Were these shot with different frame rates? Seeing the jerking motion when panning...
@tachiza1
2 жыл бұрын
Fantastic video! Thank you!❤️🙏🏻
@Kiwireels
2 жыл бұрын
I'm having issues with the wireless controller' it controls the rs2 movement but it doesn't permit me to pull focus' it doesn't respond. But it works fine on the handgrip wheel. Any thoughts?
@turkishtumblers
2 жыл бұрын
If you don’t know who the sucker in the room is than it’s you. 😅
@the_paranormal_factory1812
2 жыл бұрын
I was expecting footage to be stabilized, but I see that you have to practice that..is it easy to get better at the stabilization of it?
@ibfotografa
Жыл бұрын
Love your video and it's in dept but please can I get the list of the accessories that didn't come along with Tilta because it just arrive but didn't come with the batteries and I also want to know the kind of batteries to get. Thanks Tried to follow you on instagram but your link is wrong I guess.
@motionarytechreviews
Жыл бұрын
Hello @ibfotografa In our build we used the TB50 Batteries from our Ronin 2 you can buy it separately. You can also use V-Mount Batteries, when you don’t have the TB50 Batterypack and don’t want to spent that much this is the better solution. If you bought the Gold Mount version you need to get a Gold Mount battery. Accessories we used: www.bhphotovideo.com/c/product/890938-REG/Wooden_Camera_WC_146600_Easy_Plate_XL.html www.bhphotovideo.com/c/product/1490082-REG/tilta_ta_t01_fcc_g_bmpcc4k_full_camera_cage.html www.bhphotovideo.com/c/product/1510741-REG/smallrig_bss2465_counterweight_mounting_clamp_kit.html www.bhphotovideo.com/c/product/1603997-REG/smallrig_counterweight_kit_for_dji.html Bettery Accessories: www.bhphotovideo.com/c/product/1301742-REG/dji_cp_bx_000179_inspire_2_part_05.html www.bhphotovideo.com/c/product/1379997-REG/dji_cp_zm_00000034_01_ronin2_part_5_dual.html www.bhphotovideo.com/c/product/1634065-REG/tilta_gss_t01_bpr2_float_system_ronin_2.html Gold Mount: www.bhphotovideo.com/c/product/1634065-REG/tilta_gss_t01_bpr2_float_system_ronin_2.html V-Mount: www.bhphotovideo.com/c/product/1634065-REG/tilta_gss_t01_bpr2_float_system_ronin_2.html Make sure that they are not to big otherwise the don’t fit the mount.
@jensrappholdt1717
2 жыл бұрын
What, "if you have ronin 2, you probably have the battery package already" What do you mean? Why should I have that package? Where did you get the plate from? I got one battery, that was 400$ but only for one side.
@motionarytechreviews
2 жыл бұрын
If you dont have the package you can use the V-Mount which is included in the package or the RS 2 battery pack. But if you want to have a same setup you can buy the stuff at B&H Photo. www.bhphotovideo.com/c/product/1634065-REG/tilta_gss_t01_bpr2_float_system_ronin_2.html www.bhphotovideo.com/c/product/1379997-REG/dji_cp_zm_00000034_01_ronin2_part_5_dual.html www.bhphotovideo.com/c/product/1301742-REG/dji_cp_bx_000179_inspire_2_part_05.html
@gadeery
2 жыл бұрын
you are the best thank you so much
@motionarytechreviews
2 жыл бұрын
Thank you.
@g-7filmproduction389
Жыл бұрын
good
@KZiKT
Жыл бұрын
very nice
@wairokmm
2 жыл бұрын
Is the Power supply baseplate for RS 2 compatible with RS 3 PRO ?
@ivanmadethis
Жыл бұрын
yes
@wairokmm
Жыл бұрын
@@ivanmadethis Thank you.
@cartoonduniya8306
2 жыл бұрын
Love from India ❤❤❤
@motionarytechreviews
2 жыл бұрын
Thank you.
@WestonNey
Жыл бұрын
The footage is completely unusable for any serious work. I have tried every gimbal setup you could think of and the only way to get good stable shots in my opinion is to buy a new or used MoVi gimbal, and use an easyrig or readyrig and a segway to remove the up and down motion. Not exactly the cheapest solution, but if you actually want stable gimbal footage and don't have the money for a steadicam or and Arri Trinity, a Freefly MoVi Pro, Readyrig and Segway Ninebot S costs about $8,000 instead of $80,000 for an Arri Trinity. Better to spend $8000 once than to buy dozens of other crappy rigs and be constantly disappointed like I was. Now I shoot with the MoVi Pro and MoVi M5 and my shots are perfect.
@Satysatonachair
Жыл бұрын
There’s so many videos out there that have smooth footage using the float though. There’s a learning curve to balancing of course, but there’s absolutely no reason why this shouldn’t work.
Пікірлер: 46