Tilta!! You are welcome. I have lots more we are writing and filming now. Thanks for watching and for taking the time to comment. 🤝
@idance254
Жыл бұрын
Awesome review broh
@VolareMedia
Жыл бұрын
Thank you so much! 🙏
@gary7851
Жыл бұрын
Thanks for the video, does this replace the Pivot shoulder rig? I'm stuck between which one to invest in, thank you.
@VolareMedia
Жыл бұрын
Hello. Sorry for the delayed response. I’m not sure, I have never use the Pivot one, but I do still use this Tilta one, I like it a lot. Works well.
@Shah_creates
Жыл бұрын
No one is commenting on how Tilta just had one rod mount in the front (for the follow focus), but without two rods you will not be able to use this rig for heavier lens that need support or a traditional matte box! They clearly had the space to do it. I know this is meant to be a rig for light cameras, but you can't grow with it! Why, Tilta, WHY?
@VolareMedia
Жыл бұрын
Hello, thank you for watching and taking the time to comment. There is easily a way to mount dual rods. I am doing an episode on it soon. I actually use this base of this shoulder rig now for my handheld. Bigger lenses or anything. My next lens will be the DZO 20-70 and I guarantee I can make it work. You might just need to use a different base. Just about any base can mount to this, super easy. Might even work with this base, just a longer 12” rod instead. Should be able to mount a focus, zoom and matte box to the rod. If not I’ll use a dual rod base and mount to this. Give me a bit, I’ll make an episode about it. Thanks again.
@Shah_creates
Жыл бұрын
@@VolareMedia Looking forward to seeing your solution. I have several shoulder mount rigs, all that I have built myself. I also have devised a solution to this in my mind but don't think it will be ideal in practice, so looking forward to your upcoming video. This issue kept me from buying this rig.
@TechChannel1
Жыл бұрын
Great review. Very thorough.
@VolareMedia
Жыл бұрын
Thank you. Glad you enjoyed it. More videos coming very soon.
@remembercarmanahvalley-ej5rv
2 ай бұрын
so annoying and distracting music I stoped watching!
@VolareMedia
2 ай бұрын
That’s great! Thank you for watching. I stopped reading your comment when I noticed the terrible spelling and grammar. 🤘😜
@pawesidoryk431
11 күн бұрын
I agree. The content is great but the background sounds (I cannot call it music) make this video hard to watch.
@ErikOlsen
Жыл бұрын
Great video, very detailed. If I were to want to mount the whole rig with the camera attached to a tripod, would I be able to attach a tripod plate to the bottom and in front of the shoulder pad and pop it on my tripod?
@VolareMedia
Жыл бұрын
Hey. Glad you enjoyed the video. To answer you question. Sort of. Under the main large pad there is nothing. But if you really wanted to you could remove the rear small pad bracket and attach the included dual plate. Right on the back. But it would be very front heavy and awkward in my opinion. The other option would be if you slide off the lower plate with the two pads. You could mount any plate to the bottom of the part that slides out. It would still have the handles on it. If that’s what your wanting. If you follow my Instagram I could always send you a video or photo of what I mean. @volaremedianet I hope that helps. Thanks again.
@-austinsmith
Жыл бұрын
I ran into an issue with the HDMI cable poking me in the face, so what I did is I switched to the Arca Swiss side of the plate so then I could run it left to right and that allowed me to off center my camera to the right so that the shoulder pad fit more comfortably, idk if it's because of how my shoulders are, but it was uncomfortable having to the rig farther out on my shoulder.
@VolareMedia
Жыл бұрын
Hello, Thanks for the tip. That’s some great info. I ran into this as well. I ended up trying my 90 degree hdmi cable. That works too! I’ll be using it this week for the first time on an actual project. So we will see how it goes. Thanks again for all the great info, and thanks for watching.
@ErenKaplan-hh5gl
3 ай бұрын
Hey thanks for this video. Useful stuff. What mAh battery are you using for the monitor? Does it last long enough? Thanks
@VolareMedia
3 ай бұрын
Hi! Thanks for watching and taking the time to comment. That battery was just on there for testing. Doesn’t last that long. Now I use a much bigger one, or more often I plug into my V-Mount I put on the back. That’s a new update. I run longer shoot days now, so using v mounts for most things is the way to go. I have it set up on my camera now from a shoot yesterday, if you hit me up on Instagram I can send you a short clip or some photos. @volare.media
@lucabortolami
Жыл бұрын
I bought this shoulder rig and it's great. I have only one problem. I want to mount the entire shoulder rig on the tripod. The long plate of the shoulder rig (the one with rosette mounts) should be a manfrotto plate. I have a manfrotto fluid head but the plate is not compatible. The plate is too short and the top part of the should rig touches the tripod head and the plate can't be screwed in place. In the tilta adv of the sounder rig they show this feature but they cut the video at the exact moment they are trying to mound the shoulder rig on the tripod. So I think tilta know that the plate is not designed correctly but the don't give a f.....😢😂
@VolareMedia
Жыл бұрын
Thanks for this info. I do love this shoulder rig, and I find it very useful and so easy to set up. But I feel the same. It’s too bad that one plate is not compatible with manfroto. I do have a different way I set this up to use as a base plate, but it doesn’t utilize the handles. I’ll make a KZitem short this weekend and share how I have it set up. Watch for it. Cheers 🍻
@lucabortolami
Жыл бұрын
@@VolareMedia I'm making a custom aluminium plate to rise the tilta plate about 3mm so the shoulder rig should work better on manfrotto heads.
@Jyotirmayshuva
Жыл бұрын
Thank you for step by step process. I am going to order it this week. I have one nob question.. Is this shoulder rig comes with V-mount battery plate?
@VolareMedia
Жыл бұрын
Hello! Thanks for watching. Unfortunately it does not come with a V mount plate. You have to purchase the two rear rods and a V-mount plate. Tilta has some good quality ones at a reasonable price.
@UnitedWeBrap
Жыл бұрын
Solid review. Thank you for the upload. Do you happen to have a link to where you bought that hat you’re wearing?
@VolareMedia
Жыл бұрын
Hey! Thanks so much for your comment. Glad you liked it. For the hat, we have shirts already on our site. Hats are coming soon. We actually have a Film Crew brand. Go check it out - www.volaremedia.net/store I will have the hats available in a week or two. A few people have asked me. The logo is actually better than the hat in the video. Go check it out. Cheers 🍻
@mrhobs
11 ай бұрын
Maybe I'm wrong here, but why did Tilta decide to change standards? Did they finally just decide to abandon the Tilta standard in favor of manfrotto and... that other one? Great, doesn't fit my Tilta baseplate. I had to bolt on the included plate onto the bottom of the plate I'm already using. I don't love having a stack of plates, but I guess that works... ugh. Now I need to find an elegant way to mount a monitor where I want it... preferably not an expensive arm that shifts at the joint when bumped at all... but that's probably what I'm stuck with... should've built a custom rig...
@VolareMedia
10 ай бұрын
I always prefer having some sort of bottom plate now. With my rods and V-mount on the back. I build it all out depending on my shot list. Takes time, but if it’s the right shot, it’s always worth it.
@brawmedia
Жыл бұрын
I love it .was looking for reviews on this when I bought this ages ago . So thanks for your review it's nice to see positive vibes about it . The case really is immense . For the external monitor I had a extension arm clamp on the front arm to help me view it
@VolareMedia
Жыл бұрын
You are so welcome! Thank you for taking the time to write this. I appreciate you
@ruysposati_
Жыл бұрын
do you know if the dual base plate would fit the kessler kwid stand? it's arca swiss, but i'm not sure it's compatible
@VolareMedia
Жыл бұрын
I can’t say I know for sure without trying it. I do not currently have one to try unfortunately. But by looking at it online I do not see why not. Should fit. If I can find someone locally with this I will try it out and let you know. Thanks for watching
@mrhobs
11 ай бұрын
Could I just like... slap my current rig on top of this? Having trouble visualizing some of the details of the different plates... -Pocket 6K -Tita half-cage -Tilta 15mm LWS Baseplate (Type I) -Pictor Zooms (giant) -(2x) 16" 15mm rods -Smallrig lens support -Fotga Follow Focus -Soonwell V-mount battery plate -Andycine 4K (7"?) monitor Oh, and I have a Tilta dovetail (their proprietary one... I think?) for use on a tripod, or whatever.
@VolareMedia
10 ай бұрын
Hey! Thanks for watching. And for all the great info. I sure don’t get on here enough to check these anymore. Starting the KZitem back up soon. Have a few filmed. For this set up, I’m usually hustling between my sticks and shoulder rig. So I have a baseplate that is manfrotto and I just swap between the two, or handheld with the easy rig. Never have to change plates, I can quickly swap between the three types of shooting. Then I just have another camera on my gimbal for the 4th style. This way I’m not changing plates ever really on a bigger shoot with all different shot styles.
@mrhobs
10 ай бұрын
@@VolareMedia Awesome, thanks for getting back to me with a detailed response! Carry on, and good luck with the channel!
@europhile2658
Жыл бұрын
How long did you have to wait? Looking forward to see it in active use
@VolareMedia
Жыл бұрын
How long to get it? Wasn’t that long. Even when it says on order. They usually only take a few weeks. You can always email Tilta. They have great customer service, and they usually know when stuff is coming in. I have used it in the field for the first time recently. Works really well. I’m even using the main base now for my handheld rig. It’s a bit overkill, but I like it.
@kubraklnc4041
Жыл бұрын
yes, awesome, love this vid?eo
@VolareMedia
Жыл бұрын
I'm glad you like it
@titusnixon
Жыл бұрын
Great video I were on the fence about which shoulder mount to purchase this give me a better insight to Tilta product
@VolareMedia
Жыл бұрын
Hello, that’s great to hear. Let me know if you do purchase it. I would love to hear your feedback. We have not had a chance to finish our episode on using it in the field. But we did use it already on a few shoots. I even found a great trick to share, it turns the rear part into a baseplate. Works so good.
@titusnixon
Жыл бұрын
@Volare Media just put my order in from B&H. I had three that I was looking at, but this hit that sweet spot with function and price
@ziggyvillavicen6213
Жыл бұрын
I have one of these, and I love it.
@VolareMedia
Жыл бұрын
Great to hear. We love ours too. I actually use it as my handheld rig base as well. With the handles off and the rear pad off, I added two long rods on the back, mount my battery on that. It makes a perfect solid base for my handheld set up. Maybe an episode on that too 🤔
@Muhammed-nj8zu
Жыл бұрын
just awesome
@VolareMedia
Жыл бұрын
Thank you
@harunbas2359
Жыл бұрын
super video
@VolareMedia
Жыл бұрын
Thanks
@Asl1313
Жыл бұрын
i like it
@VolareMedia
Жыл бұрын
Thanks!!
@hagi_fan1905
Жыл бұрын
Best of luck
@VolareMedia
Жыл бұрын
Thank you. I’m working on another one now.
@rohitprajapat3909
Жыл бұрын
Another great one!
@VolareMedia
Жыл бұрын
Hey! Thank you so much Rohit. Glad you liked it.
@zynx8616
Жыл бұрын
video is awesome
@VolareMedia
Жыл бұрын
Thanks. Glad you liked it. Don’t forget to subscribe!
@mrhobs
11 ай бұрын
Very well shot, well edited review, thanks!
@VolareMedia
10 ай бұрын
Thank you so much. I appreciate you
@mrhobs
10 ай бұрын
@@VolareMedia Heck yeah 🤙
@narjest.mukbang
Жыл бұрын
Wow
@VolareMedia
Жыл бұрын
Thank you 🙏
@lymanmedeiros903
Жыл бұрын
Video footage sample?
@VolareMedia
Жыл бұрын
Been so busy. Had no time this summer to do KZitem videos. We have a plan in place to re vamp and start back up this winter. And hire some help! I will say this does work really great. Still very happy with it. Sets up so fast! Instantly ready to rock. The perfect combo has been A Cam on sticks with manfortto plate, then switch to this when needed. Then we have B Cam that lives on the Ring Grip with gimbal etc. Great set up and saves so much time during filming days.
Пікірлер: 66