This is a super tutorial and helped me get the nano working - the nano menus are so small, your excellent close up shots got me in there! Many thanks.
@scottkeary1928
5 жыл бұрын
Excellent work Joshua. Clear no hype delivery. Each topic so logically laid out. Great close-up work. I feel like I understand this unit so well now. Just 8:37 minutes of awesomeness, thank you!!
@mrCarStyling
5 жыл бұрын
You wrote everything I wanted
@joshuamacdonald8785
4 жыл бұрын
Scott Keary 🙏
@joshuamacdonald8785
4 жыл бұрын
mrCarStyling 🙏
@EytschPi42
3 жыл бұрын
This was extremely well done! Thanks! How in the world you only have 790 subs is beyond me....
@joshuamacdonald8785
3 жыл бұрын
Thankyou! Ha the curse of working full time in the film industry, but I’d love to do more of this in the future, thanks for the support!
@dudedavid522
2 жыл бұрын
jesus christ i heard this in his voice.
@AnnaLeeWright96
5 жыл бұрын
This is the definition of straight to the point my god even an index in the description?? I wish more people preferred these types of tutorials .... even 5 seconds of a branded intro are precious moments wasted for someone like me trying to catch up for lost time in education. yes sir. Thank u.
@joshuamacdonald8785
5 жыл бұрын
Thank you! People's time is valuable love to get strait to the point!
@jonghopark481
4 жыл бұрын
The best review of the Tilta Nucleus-N Nano Wireless Follow Focus .
@JodyBruchon
5 жыл бұрын
This is quality content. Please continue to make excellent videos. Not one minute of this felt like my time was being wasted.
@SilentStudiosProductions
3 ай бұрын
great tutorial. helped us make our decision on which focus pull to use with the tilta rig :)
@joehenry3275
5 жыл бұрын
Great video, quality is far beyond what your subscriber number would suggest. Keep it up!
@Lufe_Siqueira
3 жыл бұрын
Your narrative and detail with the takes is really appreciated, man. Great job.
@discorrdat
4 жыл бұрын
I appreciate the pace and detail of your video. It got me up and running quickly.
@meone310
4 жыл бұрын
Honestly your video is way better than the tilta..I couldn't believe they won't have run stop cable for canon 5d Mark IV which is one of the popular among photographer.. it's really frustrating after spending 1500 bucks still won't do recording using one switch... Thanks for your reply
@ceasarstudioceasarbelliard7873
4 жыл бұрын
Holy moley, Thank you very much. Right AutoDetailer Studio, this is a tutorial.
@AaronsMediaCompany
2 жыл бұрын
You did such a GREAT JOB with this tutorial! Saved me a TON of time! I really appreciate it
@the_kellers
5 жыл бұрын
Dude, great in-depth video. So much work went into this! Can't wait for mine to arrive.
@filmstudiojapan
5 жыл бұрын
Tilta G2x also has a 2.5mm "extend" port. Curious. Thanks for making an informative, no nonsense, no "in your face, totally extreme!" review.
@rodporteous14
5 жыл бұрын
great review. no waffle & no overly excited nonsense. Thumbs Up
@patrickbenthamradley5429
4 жыл бұрын
Thank you Joshua, very clear and concise review!
@TylerNeely
3 жыл бұрын
I’m too self-conscious about my fingers to do a tutorial like this lol. Great one though!
@Kristopherguarniz
Жыл бұрын
thanks for not shooting to my face HELLOW GUAIS, very ifnformative
@Veladence
5 жыл бұрын
Fantastic in-depth video. Keep it up man! I can't wait to watch more videos like this.
@BakingwithChickens
5 жыл бұрын
Joshua, this is absolutely a fantastic tutorial. I couldn't resist subscribing! Your delivery is so succinct and spot on - it brilliantly got me up & running on my Nano. Wish I'd seen your Nucleus M video when I was struggling to set that up! More videos please!!!!
@KendrickDischCreative
4 жыл бұрын
great video Joshua! I watched several while trying to learn quickly about my new toy and yours covers the amount of detailed needed very clear demonstrations. thank you!
@MOMENTSbyRonSonedecker
3 жыл бұрын
Excellent demo and tutorial. Agree that you need more subs, so I gave you one. Thanks for your time and effort.
@phillipchin4997
3 жыл бұрын
great explanation on how this works. thanks
@vchun9567
2 жыл бұрын
I impressed your video. I solved my nucleaus nano setup
@vidfolio
5 жыл бұрын
So much better explained than Tilta does, very much appreciated. keep up the great work!
@mrtobycook
5 жыл бұрын
This is a fantastic video. Thanks so much for putting so much time and effort into it! I kind of want a version without music, and split all the different sections into separate videos on my phone so I can refer to them. :)
@FreshSqueezedLightning
5 жыл бұрын
Awesome. I’ve been using the M on set for the last year and a half and the nano seems cool for small setups
@hexotech5202
5 жыл бұрын
Excelelent production!! Love the walk through and review. Everything was to the point and very precise clean and clear. Keep up the good work Sub'd
@AndrewNorthover
5 жыл бұрын
Solid review with the right types of detail and view on its position in the market, and loved your work around for the Ronin S too man. Really, really impressed with the informative, non-negative click bait attitude in your vid. Keep it up.
@313Films
4 жыл бұрын
Thank you for such a great explanation video... the best one out there
@yourroofspecialist8385
4 жыл бұрын
Appreciate the in depth review and set up! Thanks man.
@Luce2
4 жыл бұрын
U can also run the small motor at 12v having lot of torque
@dcchavez97
5 жыл бұрын
I love my Nucleus-N Nano! Great Vid!
@WhatWereYouWatching
3 жыл бұрын
This was really soothing.
@TheTechnoPilot
5 жыл бұрын
I can't wait to receive mine! Thanks for the guide!
@jamessilvanusfilms
5 жыл бұрын
Awesome tutorial! Super helpful and straight to the point - keep up the great work man!
@moeshickenyay
5 жыл бұрын
Dug the music, great video demo, Thanks.
@lasaosa
5 жыл бұрын
I don't usually comment on videos, but this was AWESOME, keep the good work up bro 💪
@rudestrudedog
5 жыл бұрын
Thanks for the info. Very in-depth! Still waiting for my nano from BH... guess that factory in China is cranking them out asap!
@houseofintent
4 жыл бұрын
This was well done! You just earned a sub! Keep it up man.
@geoi88i
3 жыл бұрын
You should make a video tutorial on how to make 1/4 " thread holes with the drill, I would watch that lol
@joshuamacdonald8785
3 жыл бұрын
Haha!
@ERIKOLSONTPM
5 жыл бұрын
EXCELLENT. Your review, much appreciated!!
@muhammadkamil3646
2 жыл бұрын
I am your 1000th subscriber.
@crazymetdude
5 жыл бұрын
Great tutorial - really helped me a lot with the manual calibration set up! Is there a way to set A - B points on the wheel/motor, so that when you hit each point, it vibrates, or lets you know that you've hit each point? Thank you! :^)
@TerenceKearns
2 жыл бұрын
I don't own one of these yet but I saw in another video that you can increase the torque of the nano motor by simply using a higher voltage supply. USB defaults to 5V but it will go up to 14v apparently (according the manual). No idea what this does to the lifespan of the motor.
@mrshaheedmalik
2 жыл бұрын
it supports 5-18v.
@ChrisDarby80
9 ай бұрын
The motor can take up to 16 volts... I find having a 12v barrel to micro usb from my NPF or vmount plate gives me zero lag when focusing
@mychanll
2 жыл бұрын
THX brother!
@LEKOVISION
5 жыл бұрын
Great video, thanks for posting and sharing!!!
@HiddenOaksMedia
3 жыл бұрын
I like how your background isn't a bunch of purple fucking lights and your windows are not blown out
@CarloTimothy
5 жыл бұрын
just received my production model 2 days ago. and it did NOT come with the dual charger. it did NOT come with USB to USB-micro cable. wtf Tilta
@DelonHoMusic
5 жыл бұрын
Carlo Timothy ikr! Wtf
@florinbalaican7419
3 жыл бұрын
another problem to mention is that you hand held your camera with the focus wheel attached to your rig, the signal drop and the motor stop working
@harrisonwhittaker4344
5 жыл бұрын
Solid review man. Appreciate it!
@ronsterfilm
5 жыл бұрын
Really well done and explained!!!
@visualsmugglers
4 жыл бұрын
Hello, love this , but a little suck how do you set marks? Like an a to b mark. Even with a pen.
@bighead240sx
5 жыл бұрын
Awesome video thanks 👍
@dark-california
5 жыл бұрын
Enjoyed watching your video .. . .. 👌
@moeshickenyay
5 жыл бұрын
Thanks, again.
@viniciomontero5370
4 жыл бұрын
Hi, Is it possible to calibrate the torque of the motor M without the control M?
@GuilDormeus
4 жыл бұрын
Great tutorial
@jeffmicheleweddingphoto
5 жыл бұрын
Can the speed of the focus be affect by how fast you rotate the wheel?
@jibba0202
5 жыл бұрын
does it save the A/B limits after power cycle?
@dimaua1830
5 жыл бұрын
Great review. Thank you. I wonder how it will work with focus by wire lens like Panasonic 12-35 f2.8 for example.
@moeshickenyay
5 жыл бұрын
Dima UA Good question, All I have are focus by wire Panasonic Lens’s.
@BBSHOCKZ
5 жыл бұрын
If it has a manual focus ring yes
@rjsmma
3 жыл бұрын
I'm not sure if I missed it but what's the range? I need up to 300ft away from camera..
@meone310
4 жыл бұрын
Anyway will make one by myself..see if it could work
@Nicolas_visuals
5 жыл бұрын
Great Work!👍
@nkondrashov
4 жыл бұрын
Will single press on up/down buttons do one step adjustment? Or I can do adjustments with handle only? Why asking I need very precise focus for astrophoto.
@RockstarCinema
4 жыл бұрын
Well done 👍
@gvagenas
4 жыл бұрын
Great video! What happens if the focus wheel on a mirrorless camera (Lumix LX-100) is very close to the camera body? Would the Tilta Nano motor somehow fit in that space?
@alzibaba
3 жыл бұрын
Excellent review, thank you! Good to see crossover functionality between the nano and M. Do you happen know if the Type II Focus handle with 570 battery can operate the nucleus M? I guess it would need a special cable as this handle isn't wireless, but it fits my handheld rig much better than the nucleus M left handle.
@meone310
4 жыл бұрын
Can you guide how do I use run stop cable for Canon 5D Mark IV?
@ITSCUCHO
Жыл бұрын
My friend I can’t connect the m motor whit the n fiz. I’m use the same channel and use the motor in the “motor 1 “ but don’t work. Help me.
@diodoy.g.2731
2 жыл бұрын
I have a Zhiyun-Tech Crane 2S Gimbal and a panasonic lumix g 25mm f / 1.7 asph lens and PANASONIC LUMIX G VARIO 45-150 MM F / 4-5.6 ASPH MEGA OIS Will it be compatible?
@SuggahProductions
5 жыл бұрын
Great Video Man! I have one question which is not clear for me. The instruction manual said to set the lens for close distance and the knob as well but in that case the direction of the wheel is not good for me. As you said to set the lens to infinity give me the right direction. But I assume it is not the factory standard because infinity should be +9999 instead of +0000. What do you think?
@markjansen1083
Жыл бұрын
If I turn off the nucleus the calibration is lost, is that normal?
@footballcrazy1514
3 жыл бұрын
Hi, great video very informative. Is it possible to control the speed of the Nucleus M Motor on the motor menu itself or via the Nano Wheel Controller menu? or is the speed of the Nucleus M Motor only configurable using the Nucleus Fiz Box? Is it possible to use the Nucleus M Motor with the Nano Wheel without the Fiz box at all?
@joshuamacdonald8785
3 жыл бұрын
The speed of the motor is only really affected by the speed of your rotation of the wheel. But the other thing that would affect the apparent speed is the length of the calibration. For example if a lens has a 360 degree throw the motor will have to spin many times to reach the complete range from min to max but another lens that has a 90deg throw or maybe like an iris control for example, the motor would only need to rotate once or so to reach the full range. There is no speed control in that sense it’s just whatever speed is necessary to reach the full length of the range of whatever lens is attached.
@felipevece
3 жыл бұрын
if you buy the Nucleos M controler with zoom, with another nucleos N motor you could control both motors from one controler?
@RedEyeJedigaming
4 жыл бұрын
Which focal length lens was used to make this video.
@GeoffreyGonzales
5 жыл бұрын
awesome vid dude, subbed
@Ziggz47
4 жыл бұрын
Does this work with even a small usb power bank?
@Josh_G
4 жыл бұрын
Thanks for the video! I am not able to save changes on the bluetooth settings. The handwheel turns off after 5 seconds when I turn it on. Have you experienced this issue?
@mateuszpieniazek
5 жыл бұрын
How does using it with manual lenses (with long focus throw) compare to focusing with AF lenses (with short focus throw)? I'm planning to replace my AF lenses with manual Zeisses and Samyangs (for easier focusing) but perhaps that won't be necessary and buying the Nano could "fix" my current glass.
@joshuamacdonald8785
5 жыл бұрын
Mateusz Pieniążek the throw shouldn’t really matter since the calibration maps the throw of everylens to the full scale of the hand unit. So every lens should require the same amount of movement of the hand wheel from minimum to infinity.
@KamdynFilmsStudios
2 жыл бұрын
I cant get my Tilta nucleus m handle to connect to the nano, will you please help me.
@TTM1755
4 жыл бұрын
Great video! I'm new to all this so it helped me understand the hardware. I have a question, would it work for zooming ring on the lens? I have a Sony a6000. I need to wirelessly control the zooming as the camera maybe mounted on the ceiling.
@steveworrell
5 жыл бұрын
258 subs? Make that 259!
@ahmedhashmi3584
4 жыл бұрын
Do you have a tutorial on how to mount it to a rig?
@ceasarstudioceasarbelliard7873
Жыл бұрын
can i use two motors with one hand controller? thanks
@mauriziopolese
4 жыл бұрын
A question: I use old Zeiss Contax lenses, the focusing rings have a greater resistance than the new ones. Can this move them?
@joshuamacdonald8785
4 жыл бұрын
maurizio polese your best chance would be powering the motor with 12 or 14v input from the usb port. The motor itself can handle up to 18v I believe Tilta makes a cable for this.
@DavidFranklinScience
4 жыл бұрын
Can I use two computers as an intermediaries? Is there a way to remotely control the follow focus motor? Or can this be controlled with a computer?
@alehx
5 жыл бұрын
Joshua do you think this Title Nucleus-N Nano is better option than the DJI Follow Focus for Ronin S and if you think yes why?
@ETeedProductions
5 жыл бұрын
Can someone help me? I just got this kit today and the motor will not turn on no matter what I plug it into. I plugged it into the Ronin S and into a 5V power bank and nothing happens. Am I doing something wrong or did they send me a broken one?
@Reedith
3 жыл бұрын
Does a newer version of this have USB type-c ?
@jaredflitcroft1976
5 жыл бұрын
Hey Joshua nice video and very clear explanation about the nano. I was curious would it work with the moza lite 2. It has a 5v mini USB port. Which mean I would need to buy a micro to mini USB cable right? Also would it work with the GyroVu D-Tap to Micro-USB Regulated Adapter Cable as I haven't seen Tilta release their micro usb to d tap yet. Thanks man.
@HalloFilmz
3 жыл бұрын
Please tell me why do I need this system if I already have ronin's motors for focusing? What difference?
@suatsekil
5 жыл бұрын
thanks
@levensgenieter9043
3 жыл бұрын
ive lost the battery's you get with them does any one knows were to get them?
@davidp158
5 жыл бұрын
Is there a way to map the throw of a lens' focus range to a wider range of controller wheel motion on the Nano? I'm probably doing the manual calibration wrong (with lenses that don't have hard stops), but I find the focus moves waaaaay too fast over a tiny range of the controller wheel. Any suggestions?
@Shohaiko
5 жыл бұрын
Great video, I have a question tho, i saw on the internet people talking about Arri rosette being included on the controller. Is that true or not?
@joshuamacdonald8785
5 жыл бұрын
eMDee Unfortunately no, just the quick release mount I showed in the video.
@joetrimmer
5 жыл бұрын
I was wondering the same thing. I pre-ordered mine and I'm wanting to mount it to a side-handle/grip. I can sort of see a screw on the quick-release plate. Does it come off the controller? :)@@joshuamacdonald8785
@joshuamacdonald8785
5 жыл бұрын
Joe Trimmer yes the screw comes out and can be replaced with a 1/4-20 to thread into any plate etc but at the time of the review, the only included hardware was metric. So you may have to track down a low profile 1/4-20 screw
@joetrimmer
5 жыл бұрын
OKay right I saw that in your video. So, what about the part attached to the hand unit itself? With the pins? Does that part come off too?@@joshuamacdonald8785
@Curly_Braces
5 жыл бұрын
Joshua, hi! Why did you buy follow focus by Tilta? Why not by dji? Did you use a dji follow focus? =) I want to buy follow focus for my ronin s, but I cannot decide dji or tilta)
@joshuamacdonald8785
5 жыл бұрын
Алексей Леонидович Hey! As I stated in the video, I was sent the Nano to review and did not purchase it myself, that being said I would still have purchased it for my own setup mainly because of the incredible compatibility with the Nucleus M which I also own.
Пікірлер: 230