3rd of 4 real-time, time studies prefabricating a contour following fence panel using Fence Genius V2.0 Build Rack and a previously built panel with a board pattern, 3 Rails, 3 Trim, 1 Cap to add Horizontal Lattice. This is an adder video to our first video in this series to help establish how much difference in cost a Customer may have to pay for an installed Horizontal Lattice Top Fence as compared to a Solid Fence Panel, more basic fence style. (The fence we did the time study on in episode 2.)
No other software in the industry can be as Optimized and Dimensionally Realistic to the Actual Jobsite as Fence Genius can be.
As we do further testing and verification of our brand new Fence Genius V2.0 Off-Site Build Rack just introduced at FenceTech, I made this Real Time, Time Study video to help others verify what they might expect using Fence Genius to produce Custom, Contour Following, Ready-to-Install Pre-Fabricated Modular Fence Systems in a highly productive environment like our Software Driven Production Pod, shown in the video.
Once assembled, these panels take about 3 minutes per panel to install on preset posts, including cutting the posts to height. The process brings even more efficiencies to the single-visit Daisy Chain install approach.
Offsite construction brings many benefits including a better Work-Life balance for all involved and a less impactful install for your customer.
Consider watching to start learning more about the new Fence Genius Technologies.
This is just another way the Fence Genius System and Software can enable Higher Quality, More Efficiently Built, and More Environmentally Friendly Fence Panel or Kit Systems.
Our primary Design and Build web app is available on a PC at www.FenceGenius.com. Our iOS Data Collection and Measuring App is available in the App Store.
00:00- Introduction
00:50- How can we sell more fences by offering more styles
03:22- Primary Focus of this video
03:46- Start the Assembly Process
05:14- Bring in material and start by ripping lath to the width
07:52- Cut the Lath to length and proper angle
10:57- Install Lath to PreAssembled Panel
14:52- Finished and final discussion of cost and opportunities
Негізгі бет Тәжірибелік нұсқаулар және стиль Time Study #3: Horizontal Lattice 3 Rail, 3 Trim, Cap Fence Build Fence Genius Pod using V2.0 Rack
Пікірлер: 1