The Magpul extended safety switch fits and works perfectly on my PTR lower. Love it!
@jamescollins3893
7 ай бұрын
The Magpul grip will always require fitting as even within HK’s semi-autos, there is no standardised dimension for the semi-auto self. So a 1980s import or a third-party importer may have a different spec from a modern production SP5; that's before we get into clones, and that this grip is also for use with 91s/G3s. Also, HK owners will not necessarily need to swap their housing if they own an older import, as these all used SEF-style trigger groups. The Navy/FBI trigger group came about in the late '80s and '90s, and before the SP5s came out, it had never really been in a civilian offering to the US market from HK; that was one of the cool selling points about it.
@Danko88
Жыл бұрын
I also got the Magpul housing its a large POS. I was using my Heckfire trigger pack in it which fit well. The Magpul housing IMO is junk but you get what you pay for 55 bucks. I ended up getting an SEF Navy housing from HKpro for an SP5 Shelf. Fits like a glove and my heck fire fits great.
@chef.papa.6tango523
Жыл бұрын
Sadly the timney doesn't allow for the navy trigger pack lowers...
@alexlu-h1h
Жыл бұрын
I happened to have a HK clone with a SEF trigger pack, Timney trigger goes in without a hitch. It's a huge (almost 5 lbs reduction in weight) improvement with a light enough trigger pull , crisp break and a shorter reset. I don't know what else can you ask for!
@ortiz73caify
Жыл бұрын
I can completely understand your frustration, but let’s hope the improves that much better and makes it worthwhile. Thanks for the information.
@chef.papa.6tango523
Жыл бұрын
It was a let down... definitely not a 400+ dollar improvement to the sp5. Disappointed at this point. I was let down after taking it to the range
@ortiz73caify
Жыл бұрын
@@chef.papa.6tango523 never feel bad at the end of it you have the most bad ass PCC ever created. I definitely appreciate the information. So enjoy what you have. Personally I’m think maybe a binary trigger, but that is $600 on sale.
@chef.papa.6tango523
Жыл бұрын
@@ortiz73caify they're highly recommended... those are worth the money lol
@SmokeNGunsBBQ
2 ай бұрын
Just get an sef lower. The trigger is great.
@artrocious
4 ай бұрын
Buy your lower from Lee's Sporting Trigger. He makes a MP5 lower with AR parts and its plug and play.
@chef.papa.6tango523
4 ай бұрын
Sweet, imma need to look into that
@artrocious
4 ай бұрын
@chef.papa.6tango523 he literally makes an aluminum lower housing to fit an AR trigger and grip and safety. I got mine just recently, I opted out of the Geissely trigger that he offers since it's a bit pricey but he offers other great options. Defintely look into it.
@Izathug
Жыл бұрын
I picked up the Timney trigger a few weeks ago on opticsplanet for $300 shipped. Seems reasonable now for that price.
@matthoran711
Жыл бұрын
it says in the instructions MINOR fitment required. a lot of variation in shelfs so has to be somewhat universal
@legogtad
Жыл бұрын
I get your upset about all the issues like the tigger only works in non ambi/navy/fbi and that you would have to file the grip module down but on timney website and magpuls website they tell you what will and wont work and that you would have to file that metal part down. I personally bought a sl grip module and the esk for my c308 a while back and love them it has a much better grip and saftey feel than the factory did. Only problem i have is with esk selector because it does not work with a c308 and by that i mean it will fit and you can move the selector its just that in both fire and safe positions it will fire so this was a lack of research on my part for not knowing the c308 saftey function is different from a hk safety function which is what the esk is based on but i plain on getting a hk pattern trigger to fix this problem like the timney one because i want a lighter pull than the factory 10lb trigger that i have
@chef.papa.6tango523
Жыл бұрын
Guess I didn't feel it was explained clearly, as I had no clue what trigger pack I had
@bigslinking
Жыл бұрын
This trigger is totally worth the $349 retail or $292 wholesale. The safety and grip you had to buy anyhow bro or you would have just built a illegal weapon and posted a video of the crime on youtube lol... Your trusted servants in the redbrick building downtown with no windows on the first floor could rehome your toy bro. You can only use 10 of the following parts, 6 need to be replaced. 1. Receiver 2. Barrel 3. Trunion 4. Bolt 5. Bolt Carrier 6. Cocking Handle 7. Trigger Box 8. Trigger 9. Hammer 10. Sear 11. Buttstock 12. Pistol Grip module 13. Forearm / Handguard 14. Magazine Housing 15. Magazine Follower 16. Magazine Floorplate
@thafoehammer143
Жыл бұрын
Does HK parts not have a lower grip that it fits in and isn’t ugly like the magpul? There are like 100 different ones on there.
@RangeToyz
Жыл бұрын
For real. Any clipped and pinned SEF version will work. I’d get the finger groove version.
@edgehoard417
Жыл бұрын
Thanks for the info
@johnroper3077
Жыл бұрын
I might be late on the video, but what do you plan on doing with the SP5 trigger group? That is, given it's condition and if you're not using it.....
@chef.papa.6tango523
Жыл бұрын
Don't have any plans with it. Just sitting in a box at the moment
@johnroper3077
Жыл бұрын
@@chef.papa.6tango523 I got a good deal on a PTR-9ct Classic that looked so good I couldn't pass it up. I'd like to put that on it instead of the clipped and pinned one from HK Parts. What would you sell it for?
@chef.papa.6tango523
Жыл бұрын
@John Roper the hk lower has the sn number on it, though not stamped or required to be there id prefer to keep it... I also messed up the safety selector on the housing trying to install the timney. It isn't functional anymore unfortunately
@johnroper3077
Жыл бұрын
@@chef.papa.6tango523 I was curious on it. HK doesn't do a complete clipping part of their clipping and pinning job for a PTR-9 on their trigger housings, even after you tell them about it, and you end up having to have a gunsmith finish em' or risk messing em' up with a Dremel if you don't have a milling machine and a rotary table. They look good when they're done, but it's an unecessary task. Thanx.
@GoldenWebb
Жыл бұрын
@@chef.papa.6tango523 how did you mess up the original lower?
@jbcustom3745
Жыл бұрын
Throw them KAC rail covers on
@chef.papa.6tango523
Жыл бұрын
Theyre on lol
@georgewylam6462
Жыл бұрын
What up my MeWe brother
@chef.papa.6tango523
Жыл бұрын
Lol hello
@patriotcontainers4349
Жыл бұрын
leave the HK the way it is and buy a MKE clone to throw all that stuff into, that's what I did. You know that trigger is WAY better than the stock HK trigger, my HK trigger is pure garbage and even my MKE clones "AP5" & "AP5P" are better than the HK.
Пікірлер: 36