Ahhhh.....my favorite is back. In full force. Woo hoo
@monk33_30
6 жыл бұрын
that musix track 🖖
@JBeeFPV
6 жыл бұрын
Kinda funky :p
@rl2109
6 жыл бұрын
Nice whooping! Glad to watch you fly!
@skreamfpv
6 жыл бұрын
Gnarly😆👊
@gabefpv3624
6 жыл бұрын
Awesome flight! It’s good to watch you again! :) What lipos are you flying? Lihv?
@JBeeFPV
6 жыл бұрын
Thanks man! Yeah LiHV all the way, currently using Betafpv 230 HV.
@blaqmoses5274
6 жыл бұрын
Why r u not into brushless whoops JB? Love ur flow . Sometimes u just need to get inspiration from something else.good 2 c u rip again
@JBeeFPV
6 жыл бұрын
Thanks man! I did get a UR65 recently, modified it a bit. It actually sparked my interest to fly again. It seemed pretty similar indoors but when I took it outside and did a direct comparison, my brushed build simply flew better. More punch and a lot more responsive. Could be the Silverware tune or the Bayang protocol, but it was better so I ended up flying my brushed for the rest of the packs. The only thing I miss is the turtle mode, that shit is legit! :D
@brucesdad13
6 жыл бұрын
Noted ;)
@JBeeFPV
6 жыл бұрын
@@brucesdad13 yeah tell Travis to get on that 😜 I've been harassing him about it as well haha
@dududu7694
6 жыл бұрын
Hi Jbee. I think the best 7x16 brushed motors can still do better than brusless in 65mm...but this may change with the new beta65x.
@JBeeFPV
6 жыл бұрын
Yes at the moment I think they are, but it's only a matter of time. The beta65x is 40 grams with batteries which puts it in a different class imo.
@MrJdmzach
6 жыл бұрын
Inspirational as always bro!!
@TonnyFpvv
6 жыл бұрын
Master coming back 😍
@RevO-One
6 жыл бұрын
Its a thriller man geeeez
@bokfpv
6 жыл бұрын
The master is back!!!
@JBeeFPV
6 жыл бұрын
😉👊
@KRYPTONIXBEATZ
6 жыл бұрын
Awesome man!!
@jimofpv6860
6 жыл бұрын
Impressive as always... 👍
@whoopsquad
6 жыл бұрын
Killer mix of freestyle, dives and proxy!!! You are the man!
@JBeeFPV
6 жыл бұрын
Thanks man!
@dronevan
6 жыл бұрын
do you think it is possible to hook up 1s esc‘s on to this board? i love the brushless setups but betaflight is far far away feom silver firmware. cheers
@JBeeFPV
6 жыл бұрын
It should technically be possible but I'm not sure what software changes would be necessary. There is a brushless version of Silverware but I'm not familiar with that one.
@poolec404
6 жыл бұрын
Nice! Very fluid -- so fluid it seems effortless but I know it's no accident that you're one of the best.
@JBeeFPV
6 жыл бұрын
Thank you! :)
@birdman316
6 жыл бұрын
sweet rippin broo!
@rschmidtschmidt6810
6 жыл бұрын
I've been trying to get into fpv flying any drone recommendations
@JBeeFPV
6 жыл бұрын
I'd say the drone is the least important, as you'll be buying and building lots of those anyways ;) More important are radio and goggles. Have you made a choice about those yet? I'd suggest the Jumper t8sg V2 plus, multiprotocol is really nice because you have a lot of options. Goggles are the hardest choice because they are usually the most expensive, but they don't crash so they can last you years. I would suggest Fatshark HDO with rapidfire module but they are really expensive. Maybe start with some cheap box goggles and upgrade later if you are sure you'll stick with flying. About the quad recommendations; If you go with the Jumper you can use Bayang protocol, in which case I'd suggest the Betafpv 65s lite. It's a good starter because it's very cheap, flies very docile in angle with the stock settings, and you can flash it with NFE Silverware when you are ready for some stuntz.
@MikeAarset
6 жыл бұрын
Ha Weed Flags! Great Music!
@JBeeFPV
6 жыл бұрын
yeah who needs flags when you got weed! ;)
@Gnadtad
6 жыл бұрын
Have you tried the BetaFPV Lite?
@JBeeFPV
6 жыл бұрын
Other than the shape it is the same as e011 or bwhoop if you ask me. It uses the same #define hardware as the bwhoop. But I like the e011 form factor more, because I love the e011 frame.
@luis09dfpv
6 жыл бұрын
Amazing bro.
@JBeeFPV
6 жыл бұрын
Luis! For your birthday! ;)
@luis09dfpv
6 жыл бұрын
Oh yes, I feel honored. I already missed your flights
@GosHawkFPV
6 жыл бұрын
Hey Jbee, I've just bought all the parts for a whoop build based on what you're using. Thanks for listing that. What camera angle do you fly? My 5 inch quad is on 30 degrees, is it the same feel for whoops?
@JBeeFPV
6 жыл бұрын
I prefer low camera angle, around 15 degrees. Mostly for more control and more vertical thrust. I like to fly really tight spots and with a high uptilt it's hard to stay in control. If I want to go fast I just fly really low to get that feeling of speed. :) Btw what did you plan on using for a receiver? Because... I use bayang but that means you have to get one of those rx from a toy radio.
@GosHawkFPV
6 жыл бұрын
Thanks for answering! I ended up buying a Frsky receiver for my taranis QX7! The rates are preset (juicy and full bronx) on the alienzero FC arent they?
@JBeeFPV
6 жыл бұрын
Alright, if you picked the frsky version you are all set! Yeah the rates are preset but pretty close to what I use. Pids are perfect and you can play with your rates and expo on the radio. :)
@GosHawkFPV
6 жыл бұрын
ahh yes I forgot rates can be set on the radio too, cool, thanks m8! :P
@GosHawkFPV
6 жыл бұрын
ok its built and flies great!! Just the video is very weak, if i go behind myself or a sofa it breaks up quite a bit. Is that normal? Its the TX01S 25 mw and I've got the Aomway commanders on with 2 antennas. Thanks!
@NitsudoFPV
6 жыл бұрын
AWESOME! I haven't asked this since day 1 of flying but what are your Silver rates? My alien zero rates are too slow
@JBeeFPV
6 жыл бұрын
Hmm that's strange because I use 900 and stock zer0 is 860 degrees/sec. Not very much difference 🤔 are you sure your radio endpoints go all the way?
@NitsudoFPV
6 жыл бұрын
Not sure at all about endpoints. Even outside at high altitude with 7x16 19000kv it doesnt recover from a roll without dropping and wiggling
@JBeeFPV
6 жыл бұрын
@@NitsudoFPV wait, sounds like your not running NFE Silverware. Regular Silverware has slow rates and not the magic pids. Try flashing this version: github.com/NotFastEnuf/NFE_Silverware
@JBeeFPV
6 жыл бұрын
@@NitsudoFPV oh wait you said zero, which comes with NFE Silverware.. strange. What's the weight of the build?
@NitsudoFPV
6 жыл бұрын
JBee FPV I got it from the TInyWHoop site. It says it's pre flashed with NFE. I should hook it up and check though. THanks for the help Jbee!
Пікірлер: 76