I can't wait for the HDZERO AIO. It is going to change the whoop game!!
@neuromancer692
5 күн бұрын
We have a release date for it?
@shoofly
5 күн бұрын
2 weeks - some guy 6 months ago
@pacificnorthwestpilots6050
5 күн бұрын
@@neuromancer692 Sadly, no. 😢
@ludofevrier5593
5 күн бұрын
Me to that s the reson for non buy new aio for this time
@YourdailydoseofShorts-un5vi
5 күн бұрын
Also Walksnail AIO would be great.
@CiottiFPV
5 күн бұрын
Loads of people have already been having durability problems with the 5in1 and some retailers have even been cancelling their orders with BetaFPV for them until they get it straightened out. How many batteries have you put through yours so far Chris?
@KOrnhOliO1
4 күн бұрын
That IS BetaFPV's way! 💯 BetaFPV makes Beta products that they don't test or debug and let the consumers debug them for them! Seriously! This has been going on for years! I've been in FPV for 9 years, and this is their mode of operation! 👍😒 I've been saying for YEARS... Don't buy BetaFPV products until the item has a V3 or higher behind the model number! Seriously, their products are ALWAYS DEFECTIVE until at least the 3rd revision! FACT! Time and time again this same damn pattern happens... BetaFPV releases a new product, people buy it like mad, and it turns out to have numerous problems and is literally defective! They don't recall it like other makers would in a different category of products. Nope, you're stuck with it! Then they think they've fixed it and release a version 2. It'll have different problems, but still be defective and you'll be stuck with it too! So, they'll come out with a V3 and it'll "possibly" be good. It could take till V4 until they work out all the bugs from consumers debugging the product for them! Seriously! DON'T BUY BETAFPV PRODUCTS WITHOUT A V3 OR HIGHER BEHIND THE MODEL NUMBER! Not if you want one that actually works, anyway! 🤷🤦💯🥴
@valden
5 күн бұрын
I've seen a few posts saying the 4in1 and a receiver is actually slightly lighter than the 5in1, so it's interesting seeing yours being so much heavier... I wonder if there's a pretty big variance in board weights?
@Tokyo_Dom
4 күн бұрын
It is lighter to have separate. Chris's comparison includes extra long wires and hear shrink on the receiver. With a HM Ep2, minimal wires and double sided tape holding it in place you end up about 0.2g lighter.
@zerotasteguy
5 күн бұрын
Hi Chris, was this AIO sent to you by betafpv? If it was, it would be great if you were able to buy one and test it, I feel like betafpv would be a company to send specially tested and tuned products to reviewers...
@STEDDiEFPV
5 күн бұрын
Chris, some people are saying that this 5in1 has the same issue as previous where the VTX drifts between channels mid air. Do you know if this is true or it has been addressed?
@KOrnhOliO1
4 күн бұрын
Consumers have to debug and trouble shoot this product, like all of BetaFPV's products for them! They are too damn lazy, and t have been like this for years and years, to debug products themselves. So, we the consumers get shoddy, defective products and get stuck with them. Don't buy BetaFPV products until a V3 is after the model number! It's ridiculous, but FACT! 💯🥴
@jbaked2585
Күн бұрын
I really like the way the 4 in 1 doesn’t have the front section. On mine, that seems to be the area most likely to take damage when I crash. I haven’t tied either yet, but so far, the meteora 65 has been my favorite tiny whoop.
@GR8SCOTT
4 күн бұрын
Paired with the price, this is an amazing deal! BetaFPV is killing it right now!
@GoonzFPV
2 күн бұрын
Can we get another test on the 4in1 again?? Cause maybe they tuned that vtx now. Would be nice to be able to use the 4in1 and the 5in 1 at local whoop races and like whooptopia.
@MCsCreations
5 күн бұрын
Fantastic testing and review, Chris! Thanks a bunch! 😃 Stay safe there with your family! 🖖😊
@marielizysurourcq
4 күн бұрын
I still have the first 4-in-1 ESCs from 10 years ago (and my friends were saying "yeah but if it burns one ESC you loose the whole board", lol)... I think they are still usable and will check.
@PeterM-PeterM
5 күн бұрын
We need a 2 or 3s version
@error079
5 күн бұрын
Time to pull the protective film from the scale display?
@alainassaf
3 күн бұрын
Hey man, any thoughts on their choice of gyro ? They are using the ICM42688P => this could be a topic for a future video, what gyros are currently being shipped and how they differ.
@BenBlackley
4 күн бұрын
Can we buy a bnf with this board yet? Or do we have to wait? Link please if it exists.
@KOrnhOliO1
4 күн бұрын
It's defective, don't buy.
@JonasDecker-z3x
4 күн бұрын
Betafpv has catastrophic quality control .not a single board I bought from them survived more then 20 packs . Every other manufacturer just works . With betafpv it's an absolute gamble
@h8er137
5 күн бұрын
How this tuning of watt power was done? Can it be replicated in betaflight on 4in1 board?
@KOrnhOliO1
4 күн бұрын
That IS BetaFPV's way! 💯 BetaFPV makes Beta products that they don't test or debug and let the consumers debug them for them! Seriously! This has been going on for years! I've been in FPV for 9 years, and this is their mode of operation! 👍😒 I've been saying for YEARS... Don't buy BetaFPV products until the item has a V3 or higher behind the model number! Seriously, their products are ALWAYS DEFECTIVE until at least the 3rd revision! FACT! Time and time again this same damn pattern happens... BetaFPV releases a new product, people buy it like mad, and it turns out to have numerous problems and is literally defective! They don't recall it like other makers would in a different category of products. Nope, you're stuck with it! Then they think they've fixed it and release a version 2. It'll have different problems, but still be defective and you'll be stuck with it too! So, they'll come out with a V3 and it'll "possibly" be good. It could take till V4 until they work out all the bugs from consumers debugging the product for them! Seriously! DON'T BUY BETAFPV PRODUCTS WITHOUT A V3 OR HIGHER BEHIND THE MODEL NUMBER! Not if you want one that actually works, anyway! 🤷🤦💯🥴
@AykutArgun
4 күн бұрын
Curios to know why 6S AIO chips don't include an ELRS receiver built in, wouldn't it be much more durable and easier ?
@KOrnhOliO1
4 күн бұрын
More stuff added to AIO makes them less reliable and durable!
@chrisbee5481
4 күн бұрын
Much cheaper and less trouble for manufacturers to leave out elrs and vtx from aio FCs
@VogxelFPV
5 күн бұрын
I hate my life. air65 just arrived and this drops.
@sakfpv8444
5 күн бұрын
I believe the 4 in 1 with a separate ELRS receiver is lighter than the 5in1. I think Albert Kim had a video on it? Maybe with the ELRS receiver and the wires it's heavier idk EDIT: just got halfway through the video I guess the 5in1 is lighter. The last video I saw must not have included double sided tape and wires for the reciever
@timon72489
5 күн бұрын
@@sakfpv8444 nickburns had a video where it was lighter with wires
@Tokyo_Dom
4 күн бұрын
@@sakfpv8444nah it is heavier, but not if you want to use really long wires and heat shrink and double sided tape for the receiver. For a normal weight-conservative build it will work out lighter to have separate 😊
@KOrnhOliO1
4 күн бұрын
You got a good one. 5 in 1 all defective like ALL NEW BETAFPV PRODUCTS HAVE BEEN FOR YEARS AND YEARS! Wait for a V3 product before you buy it if you want one that actually works! Seriously.
@FIGFPV
3 күн бұрын
5 in 1 is rubbish. 4 in 1 plus receiver is reliable.
@matek115
5 күн бұрын
Finally, some good fkn aio 1s
@KOrnhOliO1
4 күн бұрын
But, it's defective like all their new products!
@matek115
4 күн бұрын
@@KOrnhOliO1 deffective? all reviews recommend this 5in1 aio
@wva5089
5 күн бұрын
Wish the vtx was disableable
@marc_frank
4 күн бұрын
pit mode or what?
@wva5089
4 күн бұрын
@@marc_frank the vtx scrolls terribly with my akk vrx.. so I'd rather use another vtx. I have a hdzero spare at the moment.. so I put that on it.. but the onboard vtx is still transmitting and not on the channel I had last selected.. I installed a dummy load antenna.. in order to not ruin the onboard vtx.. but a solder bridge to unpower the vtx would have been a free/easy thing to provide by the mfg. I think all this aios should have stuff like that.. it'd really improve the second life of them.
Пікірлер: 44