Thanks for the great explaination and help! It worked. This saved me having to buy a new one!
@nickwolfs8701
3 жыл бұрын
Great to see a straight to the point clear video! Good job dude!
@krazykj03
2 жыл бұрын
What size orings are the ones for the magazine?
@3wav
3 жыл бұрын
Thanks a lot because i got a hi capa for my birthday and then the mag was leaking every time i put gas in it
@timcarr5129
10 ай бұрын
Would petroleum grease / jelly or vasalene work?
@aimantokwan126
9 ай бұрын
inlet valve 6.4mm or 5.4mm?
@chessx
3 жыл бұрын
worked perfectly thanks!
@AirsoftSouthAfricaShow
3 жыл бұрын
I just Replace the Silicon grease you have shown with wrapping plumbers tape around the spots you have shown.
@mrwickairsoft6345
2 жыл бұрын
Thanks for the help
@v3jas
5 жыл бұрын
Thank you. Nice video.
@SaltyViper
Жыл бұрын
At first I thought I could just tighten it down but that did fuckall. Managed to get away with using the evike silicone oil u add to propane to make it green gas. I'm gonna invest in some grease tho cause I'm sure the fix'd be more permanent.
@masonmaurice7388
3 жыл бұрын
thanks that helped a lot
@lmaooutloudd
4 жыл бұрын
the o ring on my mag isn't all the way on and it won't stay on
@deangreen1309
Жыл бұрын
ok
@killuminati4350
4 жыл бұрын
Ok... ok... alright
@mariot1181
3 жыл бұрын
Thanks buddy...very helpfull Both WE hi capa works fine now 💪
@euricful
6 жыл бұрын
What size would the magazine base o-ring be?
@garrywhite13371337
4 жыл бұрын
Your best bet is to get a multipack of various sizes and see if you can find one thats close.
@garrywhite13371337
4 жыл бұрын
Damn bro you're great help thank you! Stupid gas leaks lol
@thegreatcashini1720
3 жыл бұрын
my magazine does not have a hole with a pin in it?
@PolarStarPenguin
4 күн бұрын
mine didn’t even have an o ring
@lonevoice4857
2 жыл бұрын
awesome video! thanks alot for the help on the regular mags.. just a reminder, do NOT use this method for the extended magazines. opening the bottom cover plate. the first one on the regular mags holds the spring
@wademacdonald106
7 ай бұрын
Where do you buy the small black o ring?
@markevinlagsac3252
3 жыл бұрын
I used wd-40 silicon and it works like a charm
@maxonwolf5841
2 жыл бұрын
Careful using that.
@MightNotBeRapid
4 ай бұрын
what happens if i use just regular gun lube?
@arch.angelhandyman5485
3 жыл бұрын
nice mafrend, thanks
@malteostling5957
3 жыл бұрын
Great video it solved my problem with my hi capa magazine
@dbworthless
Жыл бұрын
Thank you soooo much 😊😊😊
@lucasperies6952
Жыл бұрын
your the best !!
@cwtzh7736
2 жыл бұрын
thanks bro!!
@sarahnz65
7 жыл бұрын
In case of gas still in the magazine, is there a safe way to remove/vent the gas without resorting to just putting it back in the gun and firing until it just don't fire any more?
@zerkxea
7 жыл бұрын
sarah fowles @0:25 push that piece in to vent the gas.
@sarahnz65
7 жыл бұрын
+zerkxea thank you. All good things to know, picking up my first GBB high Cappa this week.
@soupsfarm1825
6 жыл бұрын
I have silicon lube thats more like oil (its not oil its airsoft lube) is that fine too?
@zerkxea
6 жыл бұрын
Yes, that should work too.
@soupsfarm1825
6 жыл бұрын
zerkxea thank you for the quick reply! I appreciate it
@hobbyttc8469
4 жыл бұрын
It's not gas leak tho but my tm hicapa 5.1's magazine ejects itself when i shoot. Anyone have the solution?
@ramirdacanay1858
5 жыл бұрын
Highly recommended.
@ramirdacanay1858
5 жыл бұрын
Thanks 😘
@tac_zac943
4 жыл бұрын
great video help me but in the process i broke my mag for sure
@ac_hype2909
5 жыл бұрын
Hey I took apart my mag and I put everything back together but the screw on the bottom won’t screw back in. What do I do?
@anxo7390
5 жыл бұрын
Try to push down a little harder on the screw. It worked for me
@ryanhudson9155
2 жыл бұрын
Helped a lot. Thank you
@yourlocalwigga151
3 жыл бұрын
What lube did you use?
@zerkxea
3 жыл бұрын
Smart parts paintball lube
@yourlocalwigga151
3 жыл бұрын
@@zerkxea thanks
@crgardner99able
6 жыл бұрын
Great video man! Thanks. Helped alot
@knightairsoftwarrior
6 жыл бұрын
Where can you find o-ring replacements?
@zerkxea
6 жыл бұрын
Speedsoft_Raider Ace hardware or the likes. I was lucky to have an old paintball parts kit that had one that fit.
@Tjkfbi
7 жыл бұрын
I use co2 in my hi capa, but my hicapa explodes everytime i shoot it, how do I fix that
@hatersupreme5968
7 жыл бұрын
Tjkfbi tape
@hatersupreme5968
7 жыл бұрын
is that a zci fill valve or stock tm one? my WE valve broke when I tried to tighten it
@zerkxea
7 жыл бұрын
Rona Lisa Stock TM.
@tonylavelle8017
4 жыл бұрын
Thank you Zerkxea, this video was perfectly presented and so useful. You saved me a fortune in replacing my leaky Salient Arms mags.
Пікірлер: 56